Used Mortiser for sale (272)

Condition: ready for operation (used), Technical characteristics Table dimensions 1000 x 300 mm Control on the chassis + pedal Motor power : 2,2 kW Mechanical counter SIKO Protected machine Psdpfet T Igpox Ac Ajgi MortaisageChisel Power and Motors Voltage: 380 V Pluging: Three-phased Motor: 3 CV Overall dimensions Weight: 650 Kg

Condition: ready for operation (used), Technical characteristics Max. mortise depth : 150 mm Max. mortise length : 340 mm Longitudinal stroke : 300 mm Cross-travel : 80 mm Max. height of upright on worktable : 300 mm Working table dimensions : 400 x 135 mm Table inclination : -45° to +45°. Mechanical front press Pneumatic door locking Aluminium extension with mechanical stops Guiding rod for horizontal door positioning Compressed-air gun for machine cleaning Door support Automatic chain lubrication pump Manual vertical travel Power and Motors Voltage: 400 V Pluging: Three-phased Power: 2,2 Kw Pgodet Dga Nopfx Ac Aji Motor: 3 CV Overall dimensions Lenght: 1916 mm Width: 1400 mm Height: 1026 mm Weight: 420 Kg

Condition: ready for operation (used), Technical characteristics Mortise depth : 150 mm max Bar lubrication pump Frontal stroke 80 mm Longitudinal stroke 200 mm Swivel table Door support Pedpfx Acot Dgbae Ajgi Manual lowering Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions

Condition: ready for operation (used), Technical characteristics Oscillating bit mortiser Horizontal bit movement during machining Height-adjustable, tilting table Manual table height adjustment (fine adjustment) Pneumatic presser and pneumatic table feed Limit switch Ideal for cabinet makers Power and Motors Voltage: 380 V Pgsdpst Dgc Rofx Ac Asi Pluging: Three-phased Overall dimensions

Condition: ready for operation (used), Technical characteristics Cast-iron frame Motor 1.85 kW, 2800 rpm Cast-iron vertical table 500 x 80 mm Left-right table travel 190 mm with stop Vertical head travel : 220 mm Eccentric press Stops for mortising door locks Motor cross travel : 95mm Automatic chain lubrication Automatic chain tensioning Automatic motor start Power and Motors Voltage: 400 V Pluging: Three-phased Power: 1,85 Kw Motor: 2,5 CV Overall dimensions Lenght: 900 mm Width: 900 mm Height: 1600 mm Podpfx Aet Rrdgoc Aegi Weight: 275 Kg

Condition: ready for operation (used), Technical characteristics Square mortises, without lubrication Pjdpfx Acet Dgb Hs Aogi Horizontal front stroke 90 mm Pneumatic feed Tilting head Pneumatic presser Aluminium table 1200 mm Ideal machine for furniture and carpentry Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics Mortise depth : 150 mm max Bar lubrication pump Frontal stroke 80 mm Longitudinal stroke 200 mm Swivel table Door support Manual lowering Pgjdpjuaiidjfx Ac Asi Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics Mortise length : 20 to 110 mm Mortise thickness : 2 to 29 mm Max. mortise depth : 110 mm Cast-iron frame, aluminum table Manual workpiece clamping (2 vertical pressers and 1 front presser) Motor 1.1 kW (1.5 hp), 3000 RPM Pgodpfx Acjt Dgaco Aoi Wood dimensions : Width : 30 to 150 mm Thickness : 15 to 80 mm Automatic part feed from magazine Automatic mortising head feed Power and Motors Voltage: 380 V Pluging: Three-phased Power: 1,5 Kw Motor: 1,5 CV Overall dimensions Lenght: 4100 mm Width: 1350 mm Height: 1500 mm Weight: 600 Kg

Condition: ready for operation (used), Technical characteristics 3-axis controlled mortising machine Max. machinable solid part size : 275 x 160 mm Max. mortising depth : 130 mm Pjdet Dgaijpfx Ac Asgi Hydraulic motor : 0.75 kW Work table : Dimensions : 1000 x 310 mm Longitudinal travel : 400 mm Cross travel : 150 mm 2 extensions, length 1200 mm Extension with electronic stop : 2600 mm Electronic stop travel speed : 40 m/min Workpiece clamping with hydraulic pistons (2 front and 2 vertical) Mortising heads : Manual vertical adjustment Motorized vertical adjustment Vernier for quick calculation of chisel oscillation angle 2.2 kW motor Pneumatic circuit operating pressure : 6-8 bar Upper suction mouth diameter : 80 mm Suction speed : 25-30 m/sec Power and Motors Voltage: 380 V Pluging: Three-phased Power: 3 Kw Motor: 3 CV Overall dimensions Lenght: 1000 mm Width: 1400 mm Weight: 850 Kg

Condition: ready for operation (used), Technical characteristics Square mortises, chipped, without lubrication Horizontal front stroke 90 mm Pjdpfxsuaiike Ac Ajgi Pneumatic feed Tilting head Pneumatic press Aluminium table 1200 mm Ideal machine for furniture and carpentry MortaisageChisel Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics Motor 1,5 kW Podpjt Dgbtsfx Ac Aegi Support for door Stroke 200 mm Max depth 150 mm Manual presser Manual up/down Power and Motors Pluging: Three-phased Overall dimensions

Condition: ready for operation (used), Technical characteristics 200 mm stroke cast iron table max depth 150 mm trim protection Pgodpfjt Dgckox Ac Aoi manual presser Caractéristiques mortaisageDoor stand MortaisageChain Power and Motors Power: 1.5 Kw Overall dimensions

Condition: ready for operation (used), Technical characteristics Pneumatic table feed Per side: 4 adjustable upper mortising heads 3 rear horizontal heads including 1 adjustable Dimensions de la table1000 x 200 mm Nombre de têtes de mortaisage14 Caractéristiques mortaisageTilting table MortaisageSpindle Power and Motors Overall dimensions Pgedpfx Aot Dgc Doc Asi

Condition: like new (used), functionality: fully functional, AUTOMATIC TENONER machine model BALESTRINI PICO AUTOMATIC MORTISER machine model BALESTRINI MICRON Pgjdpfsdwqi Ssx Ac Aji videos of machines in working are available second hand machines in Excellent working condition , like new CE mark Yes for production of parts of chairs , sofa' , bedroomes , furnitures , etc . with tools : Yes volt. 380/50

Condition: new, Automatic mortising machine with 3 heads Worktable dimensions 3000 x 300mm Cast iron construction to give maximum rigidity 3 x vertical hydraulic work piece clamps 3 x horizontal hydraulic work piece clamps Speed movement in adjustable through hydraulics Automatic operation Mortising heads x 3. Manually positioned in X axis with mechanical locks Mechanical siko readouts for height position - Z axis Double eccentric operation of the mortising heads (patented design) Motor HP3 RPM 2800mm Max distance between 2 x outside mortising heads 2800mm Min distance between 2 x outside heads 180mm - ctre to ctre of mortise. Psden Nv Txspfx Ac Ajgi Dust extraction outlets 100mm Hydraulic pump motor 10hp

Condition: new, Centauro BETA 3 Axis CNC Swing Chisel Mortiser Pgsdjb Tmpqopfx Ac Aei A new fully programmable 3 axis horizontal CNC swing chisel mortiser suitable for general joinery and furniture production. By a combination of automatic movement of the mortisting head in the x axis and an automatic gripper that positions the timber no manual movement or handling of the component is required other than loading and positioning the timber against the pneumatic reference stop and then unloading when the mortising cycle is finished.The complete movement, clamping and mortising cycle is fully automatic. X,Y and Z axis movements are all via re-circulating ball and screw drives and using linear slideways to give maximum positioning accuracy. Thanks to the programmable Z axis it is possible to produce off line mortises, double mortises or produce thicker mortise slots with the same chisel. Programming is very simple thanks to the 'user friendly' graphic touch screen controller were programs can be memorised and stored under a number or specific name up to 8 characters. The swing chisel cutter itself produces a very clean mortise slot and if required for deep mortises upto 3 depths of cut can be programmed to give a 'woodpecker' type cutting operation. Other programming options include working off either the face of the timber or the thickness and the possibility to produce mirror image components (left/right hand) in one program. On request the machine can be equipped with a separate dedicated programmable hollow chisel head for producing the small mortise holes for glazing bars. Alternatively a horizontal milling head can be specified that can be used for hinge recessing, slotting for louvre doors etc etc. X axis stroke 1100mm. Y axis stroke 250mm. Max. depth of cut 120mm (depending on chisel size) Z axis stroke 100mm Max. workpiece height of 120mm. All movements on re-circulating ball and screw drive with brushless motor Max. workpiece width 200mm (wider on request). Max. swing chisel thickness 20mm. Min . slot length 25mm approx (with swing chisel) Min. slot thickness 6mm. 3 vertical pneumatic clamps. 3 horizontal pneumatic clamps. 4 hp main motor. 'Power 1000' touch screen graphic controller with 99 programs each with 50 lines. USB key facility. Programmable speed for cutting depth. Anti splinter guards with air blowers and dust extraction points.1 x 80mm 1 x 60mm dia. Working table dimensions 1210mm x 215mm Installed power 3.6kw. (std machine) Air supply 6 bar / 470 l/min consumption.

Condition: new, Year of construction: 2026, Universal solid wood boring machine for frames and horizontal mortiser. Short introduction: • Universal application: frames, entry doors, windows, as well as useable as horizontal mortiser, ... • Drilling depth up to 150 mm (larger drilling depths optional) • Pneumatical position height adjustment for 2 levels 0 - 100 mm, adjustable through mechanical digital counters Pgsdpfx Ajdx R D Ssc Aoi • Drilling in two height positions at a single workpiece clamping position • Pneumatic clamping cylinders • Multi spindle drillheads (option) • Pneumatic feed (option) • Mobil through castors (option) or with pallet trucks

Condition: new, Year of construction: 2026, Universal solid wood boring machine with stepless turnable drilling unit for universal applications like e.g. staircases, entry doors, windows, winter gardens as well as useable as horizontal mortiser. Short introduction: • Universal application: staircases, frames, entry doors, windows, winter gardens as well as useable as horizontal mortiser, ... • Steppless turnable drilling unit: 65° - 0 - 65° Pjdpfxedx R E To Ac Aogi • Drilling depth up to 200 mm (larger drilling depths optional) • Position height adjustment for 2 levels, pneumatically, 0 - 100 mm • Drilling in two levels through pneumatic raising and lowering of the drilling motor at a single workpiece clamping position • Pneumatic clamping cylinders • Multi spindle drillheads (option) • Pneumatic feed (option) • Mobil through castors (option) or with pallet trucks

Condition: new, Year of construction: 2025, A compact design sheet fiber laser metal cutting machine with complete protection Small occupied space balances complete protection and higher safety. Each frame of the cutting machine bed is welded after mortise-and-tenon joint to achieve perfect mechanical property and better stability and firmness. The pull-out cutting machine table, with the electric table optional, saves space occupation and freshen up the user operation experience. Convenient and fast open&close with one click; The laser cutter door is safe and reliable, by using rack-pinion transmission mode combined with self-locking cutting machine system Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Pgsdehwv N Hspfx Ac Aoi Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W, 12000W Cutting Area: 1000*1500mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: good (used), Code: 0344 Brand: SCM MINIMAX Model: FS 41/C - CE Standard Pedpoyxfy Hofx Ac Aegi 3 Works combined machine (Surface/ Thickness/Mortiser) for wood, carpentry, furniture, window frames , doors, plastics, and various - CE Standard Technical data: Planer shaft with n° 3 “Tersa” knives Working width 410 mm Total length of surface tables 2000 mm Guide inclination 90–45° Thickness table dimensions 410 x 605 mm Thickness feed speed 7 m/min Thickness min/max working height 3/230 mm Three-phase motor 6,5 Hp Cast iron mortiser: table dimensions 430 x 220 mm Spindle connection diameter 16 mm Wheels for moving the machine Suction port diameter 120 mm Overall dimensions mm 2000 x 1000 x 1100 h Weight kg 340

Condition: good (used), Year of construction: 1999, Slot mortising machine CM104 - Year of manufacture: 1999 - 400 Volt - with dowel boring unit featuring locating pin and remote control - robust construction - single-lever operation - 2-jaw Westcott drill chuck Podoywnqljpfx Ac Ajgi - extraction unit

Condition: excellent (used), Number of agregats 1 St. Motor output 0,37 kW connected load frequency 230 V Pjdpfoyvkt Tox Ac Ajgi Lock width 6x6 mm Rectangular drilling machine or mortising machine Scheppach type St 12 for drilling or mortising rectangular holes for doors, windows or similar applications.

Condition: excellent (used), Cold room lock, cold storage lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock, unused, original packaging -Type: 3.16.416.2 Links -Number: 8x door locks available Pjdpfxjqqpkdj Ac Ajgi -Price: per piece -Cardboard dimensions: 260/150/H40 mm -Weight: 1.1 kg/pc.

Condition: excellent (used), Year of construction: 2001, Felder slot mortising machine FD-250 Motor power: 2.2 kW Year of manufacture: 2001 Height adjustment via handwheel Podpfx Asyvv Ngjc Ajgi Lever operation 2 manual clamps Includes several slot mortising cutters Location: ex stock 54634 Bitburg - immediately available -

Condition: like new (used), Chain Mortiser LS 103 EO - 8.7 kg Pgodpfsyty I Hsx Ac Aoi - Year of manufacture: 2016 - 230 Volt - with stand - 2600 Watt