Used Notcher for sale (69)

Condition: good (used), Cutting performance: Flat steel shears Blade length: 250 mm Sheets up to: 13 mm Flat steel up to: 150 x 16 / 200 x 13 mm Profile steel shears Angle iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm T-iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm U and I steel up to: NP 18 Iedpjh Uhb Ssfx Aanetr Stroke rate: approx. 30 1/min. Bar steel shears Round steel up to: 42 mm Square steel up to: 38 mm Notcher Sheets up to: 12 mm Notching width up to: 50 mm Notching depth up to: 85 mm Hole punch Thrust: 370 mm Punching capacity: approx. 50 t = 25 Ø x 16 mm / 20 Ø x 19 mm Drive power: 3.0 kW Weight: approx. 2,200 kg Equipment - Hand and foot release - Support table on the hole punch - Various additional tool holders - Various replacement blades - Extensive accessories

Condition: used, Punching force: 400 kN (punches e.g. 20 m in 15 mm steel) Iedpfew Im Shjx Aanjtr Cuts 150 x 10 mm on the flat steel shears With pipe notcher on the bar shear Foot switch for stroke activation Support table on the punching side Quick change device Range of tools is included in the price

Condition: used, Year of construction: 1999, Technical details: working area: 10700 mm Tube length: 300-11000 mm min. workpiece diameter: 80 mm max. workpiece diameter: 260 mm Power: 120 KW dimensions: 21,5 x 5 x 3,8 m mm weight: 90.000 kg pre-turn capacity: 200 cdm/min HS Code: 8461 90 00 Description of the system Ijdpfsvizuiox Aanotr Manufacturer / Type Vario 1200-11000 Year of manufacture 1999 Intended use peeling machine for pipes and solid material with ultrasonic measuring system for detection of wall thickness deviations and correction of the same. Machine control SIEMENS 840 D - 6 axes Max. speed on the scraper/peeling device: n = 200 min-1 *

Condition: used, round bar steel 30 mm square edge steel 28 mm L-beam 60 x 8 mm flat steel 100 x 12 mm total power requirement 1,5 kW weight of the machine ca. 1,7 t Itjdpfx Aaovu Hbfonor dimensions of the machine ca. 1,5 x 0,7 x 1,8 m Profile steel shears with notcher

Condition: used, functionality: fully functional, General Information Manufacturer: Peddinghaus Corporation Model: 210 Type: Hydraulic Ironworker Workstations: Punching, section shearing, flat bar shearing, notching, and round/square bar shearing. Capacity and Performance Punching Capacity: Approximately 55 - 60 tons (US tons). Punching: Typically, a 25 mm diameter hole in 16 mm thick steel. Angle Shear: 90-degree cut: Approx. 100 x 100 x 10 mm. 45-degree miter cut: Approx. 75 x 75 x 8 mm. Flat Bar Shear: Maximum thickness: Approx. 300 x 15 mm or 200 x 20 mm. Notcher: Itodpfx Aajw Sy Ecsnjr Plate: Approx. 10 mm. Angle: Approx. 75 x 75 x 8 mm. Round and Square Bar Shear: Round bar: Approx. 38 mm. Square bar: Approx. 32 mm. Other Information: Weight: Approx. 1700 - 2000 kg. Dimensions (L x W x H): Approx. 1500 x 800 x 1900 mm. Verify the accuracy of the information with the seller.

Condition: good (used), Year of construction: 2001, machine/vehicle number: 443954701005, Offer 25086 Hydraulic profile and bar steel shears with notching device and hole punch Technical specifications: Iedpfx Asv I Sxvjanjtr - Flat steel shears - Flat steel - 400 x 120 mm - or: 300 x 22 mm - Section steel shears - L- and T-bars at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notcher - With square notcher for sheets up to approx. 13 mm - Notching depth approx. 70 mm - Notching width approx. 52 mm - Hole punch - Punching force approx. 100 t - Throat 510 mm - Stroke approx. 10 to 50 mm - Punches in steel up to Ø 31 mm in 25 mm - Electric contact stop - Various 10 punching dies + Dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Condition: new, Metallkraft HPS 45 S Hydraulic sectional steel shear/hole punching machine (3819045). Combined machine with up to 5 processing stations and foot operation. DESCRIPTION - Punching station, flat steel shear, angle steel shear, section steel shear, from HPS 45S with notching station - DS-series with two working cylinders and two foot pedals for simultaneous working with punching station and section steel shear - Stepless adjustment of the stroke - Larger throat for punching station with 620 mm optional, from HPS 55DS available - Heavy and stable welded construction - From HPS 45S with notching knife as standard equipment - With powerful 400 volt motor - V-notching knife, oversized punching device and larger throat for punching station available on request - Two-stage foot pedal for inching operation - Standard with MUBEA holder for punch no. 1, no. 2 and no. 3 as well as die no. 30, no. 45 and no. 60, use of punch and die no. 4 and no. 80 optional (except HPS 40S) Advantages of punching compared to drilling: - High time saving - cycle times - No chips - No cooling Notice: All hydraulic section shears are supplied with oil TECHNICAL DATA Dimensions and weights length (product) approx.: 1500mm width/depth (product) approx.: 950mm Height (product) approx.: 1680mm Weight (net) approx.: 1400kg Notching station Notching station material thickness max.: 8mm Notching width max.: 35mm Notching depth max.: 75mm V-notching tools (accessories): 100 x 100 x 8mm Electrical data Power drive motor: 4kW Supply voltage: 400V Mains frequency: 50Hz Itjdpfx Aaskzk Hvensr Flat steel shear Flat steel shear material width x thickness max: 200 x 15mm Flat steel shear material width max x thickness: 300 x 12mm flat steel shear blade length: 316mm Flat steel shear angle cut 45° side length max. x thickness max: 80 x 10mm Flat steel shear working height: 955mm Punching station Punching pressure: 45t Punching station diameter x sheet thickness max: (steel 400 N/mm²)22 x 15mm Punching station diameter max. x sheet thickness: (steel 400 N/mm²)38 x 8mm Punching station throat: 175mm Punching station stroke max: 50mm Punching station stroke rate: 20/min Punching station working height: 955mm Steel bar shear Steel bar shear capacity round material: 30mm Steel bar shear capacity square material: 25mm Angle steel shear Angle steel cutter cutting capacity 90° L profile: 100 x 100 x 10mm Angle steel cutter cutting capacity 45° L profile: 70 x 6mm Angle steel shears cutting capacity U-I profile (accessory): 80 x 45mm Angle steel shears cutting capacity T profile (accessory): 40 x 5mm Angle steel shear working height: 1140mm SUPPLY - Punching station - Flat steel shears - Angle steel shear - Sectional steel shears with round and square blades - notching station - punch holder with bayonet lock - punch and die reducers no. 1, no. 2, no. 3, no. 30, no. 45 and no. 60 - Punch, flat steel cutter and notcher with adjustable stops - hook wrench - foot pedal - hydraulic oil Made in Turkey OTHER MODELS PLEASE REQUEST

Condition: used, Year of construction: 1979, round bar steel 28 mm square edge steel 25 mm L-beam 80 x 8 mm cutting capacity 35 t shear : steel sheet max. 10 mm shear: flat material 100 x 11 mm blade length 175 mm triangle notching device for sheet until 8 mm no. of strokes max. 35 Hub/min work stroke ca. 35 mm total power requirement 1,5 kW weight of the machine ca. 535 kg Itsdsvw Dvljpfx Aansr dimensions of the machine ca. 0,97 x 0,45 x 1,55 m Motorized 4-way profile steel shear on a rotating base and mobile. The machine can also be used for hole punching by purchasing a hole punching device (instead of a notcher). Photo 5 shows which tools the punching device can optionally be equipped with. All performance specifications refer to a material strength of 450N/mm². Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1991, Maximum punching force: 1100 kN Maximum shearing force: 1700 kN Punching depth: 510 mm Holes 31 in 25 mm Flat steel: 500 x 22 mm Hydraulic hold-down device for the flat steel knife Square notcher Weight: approx. 5000 kg Itsdpfxof Nwn Uo Aanjr

Condition: used, Year of construction: 2003, round bar steel 30 mm square edge steel 25 mm L-beam 80 x 80 x 8 mm 200 x 13 / 350 x 6 mm 40 t throat 175 mm work stroke 32 mm work height max. 980 mm hole diameter in sheet thickness 20 x 15 / 38 x 8 mm total power requirement 3,0 kW weight of the machine ca. 0,62 t Dimensions (LxWxH) 1,0 x 0,8 x 1,3 0 Itjdjr Erwlopfx Aanjr Profile steel scissors with - 1 foot trigger - Support tables - Rectangular notcher - Hole punch including tools

Year of construction: 1991, condition: used, round bar steel 45 mm Itedpfed Ih Stsx Aansr square edge steel 42 mm L-beam 140 x 13 mm flat steel 350 x 20 mm pressure 550 kN throat 305 mm notching: rectangle tool mm total power requirement 5,5 kW weight of the machine ca. 1260 kg dimensions of the machine ca. 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure.

Condition: good (used), Offer 23477 Hydr. flat profile and bar steel shears and hole punch Technical data: - Flat steel shears cut up to 350 x 12 mm - Steel section shears - cuts L-steel 90° up to 100 x 10 mm - Steel bar shears - cuts round steel up to 32 mm - Notching device Itjdpfxera Avdo Aanjr - Rectangular notcher 50 x 90 mm - Hole punch - punching force 550 KN - with stop table - throat depth 220 mm - punches holes in steel up to 32 Ø in 12 mm - Coordinate table - manual stop - E. foot switch - Drive 400 V / 2.2 kW - Space requirement approx. W 900 x H 1750 x D 1700 mm - Weight approx. 1200 kg

Condition: ready for operation (used), Year of construction: 2018, Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm Itjdpfx Aasrxflcsnsr

Condition: new, Year of construction: 2025, Max Ø 114mm; Straight and bent round tubes; Itedpfx Aaot Eaw Doner One grinding station; Grinding of straight and bent round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval and elliptical tubes. The ML planetary belt system allows belt grinding without rotating the tube to deliver the best results. The feed system safely feeds the straight tubes into the grinding station for a consistent and productive surface finish. ML100 Working capacity (Ø mm) 3 - 114 No. of stations 1 Sanding belt, dimensions (mm) (2x) 50x940 Sanding belt speed (m/s) 3-22 Sanding belts Motor (kW) 3 Wheel, motor (kW) 1.5 Total power (kW) 4.5 Power consumption (A) 11 Dust extraction connection (Ø mm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250

Condition: new, Tubend TT 90 pipe grinding machine Tube grinding machine Incl. 10 pieces. Grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 49.5 - 57.5 - 73.5 mm Incl. 6 sanding belts Belt width 100 mm Belt length 1250 mm Pipe diameter 16.5 - 90 mm Angle adjustable from - to 0 - 65 degrees Supply voltage 400 V Total power requirement 2.2 kW Machine weight approx. 0.18 t Iedpfjt Sumajx Aanetr Space requirement approx. 1.2 x 0.6 x 1.3 m Pipe clamping range 90 mm Documentation (English)

Condition: new, tube diameter 1/4" max. 2" Zoll wall strength max. 3,0 mm engine 400Volt / 1,5KW weight 90 kg dimensions 07 x 0,4 x 0,3 m Iodpov Skzkjfx Aanotr Pipe notcher Maximum wall thickness 3.0 mm Suitable for the following pipes: 1/4", 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"

Year of construction: 2008, condition: good (used), machine/vehicle number: 431808, Lg.No. 18177 Hydr .flat profile and bar shear with notching device and hole punching machine Technical data: - Flat steel shear cuts up to 375 x 10 mm - 220 x 20 mm - section steel shears - cuts L-steel at 90° up to 130 x 13 mm - steel bar shears - cuts round steel up to 45 mm - square steel up to 45 mm - notching device - with square notcher 100 x 42 x 10 mm - punching machine - punching force 600 KN - with stop table - throat 300 mm Itjdpfx Aomidyisanjr - punching in steel up to 28 mm Ø in 15 mm - or 34 mm Ø in 12 mm - manual length stop - drive 400 V / 4 kW - space requirement approx. W 600 x H 1550 x D 1500 mm - weight approx. 1300 kg

Condition: used, Year of construction: 2003, round bar steel 32 mm Iedpfx Aasrc In Aenotr square edge steel 30 mm L-beam 80 x 80 x 8 mm 80 x 13 mm 36 t throat 170 mm work stroke 28 mm work height max. 980 mm material thickness 28 x 13 mm hole diameter in sheet thickness 25x10 / 30x8 mm total power requirement kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,2 x 0,8 x 1,9 m Profile steel scissors with - 4 workstations - 1 foot trigger - hydr. drive - Support tables - Rectangular notcher - Hole punch including tools

Year of construction: 1998, condition: good (used), machine/vehicle number: 4422758898019, Offer 22646 Hydr. profile and bar shears with notching device and hole punching machine Technical data: Isdpfemb U Slex Aanotr - Flat steel shear - flat steel - 400 x 16 mm - or: 300 x 18 mm - Section steel shear - L- and T-iron at 90° 130 x 12 mm - square steel / round steel 40 / 40 mm - notcher - with square notcher for sheets up to approx. 13 mm - notch depth approx. 70 mm - notch width approx. 52 mm - Hole punch - punching force approx. 60 t - throat 400 mm - stroke approx. 10 to 50 mm - punches in steel up to Ø 31 in 15 mm - material stop - div. 10 pcs. punch + dies - drive 400 V / 5,5 kW - space requirement W 1100 x H 2000 x D 1700 mm - weight approx. 2100 kg