Used Notching Saw for sale (6,058)

Condition: new, Year of construction: 2026, I am selling this long-cut (shortening) saw. Suitable for cutting boards, prisms or large prisms. Cutting length: 600 / 900 / 1200 mm Cutting height: 100 / 150 / 200mm Motor power: 7.5 / 11 / 15kW Disc diameter: 500 / 600 mm Disc feed mechanical using an electric motor. Individual parameters can be customized. Tables according to specification. Bsdpfx Acex Ut Iqjgeww

Condition: good (used), Year of construction: 1985, Cold circular saw Eisele VMS III S.PV Saw blade feed: manual Vise Saw blade diameter max.: 350 mm Miter cuts from 90-30 degrees Cutting capacity (straight cuts): Flat profiles: 200 x 90 mm Pipes: 120 mm diameter Square tubes: 90 mm Bwedpfx Aeiyzccocgow Solid material: 100 mm Cutting capacity (miter cuts): ◾Flat profiles: 140 x 90 mm Pipes: 120 mm diameter Square tubes: 90 mm Solid material: 100 mm Rotational speeds: 34/68 RPM

Year of construction: 2004, condition: excellent (used), Dimter optimization crosscut saw 350 with elevation AH 1400 mm crosscut see picture crosscut saw control cabinet Scanner interface sorting 6500 mm long 3 pushers Waste flap Machine is already dismantled and immediately available Machine ran without problems until dismantling Transport can be organized Bwjdpsncc Icsfx Acgsw

Condition: used, Year of construction: 1982, Technical details: dimensions of saw-band: 3920 - 4050 mm throat: 500 mm workpiece height: 400 mm table - inclinable: 15 - 30 Grad Bwedpfx Asyzpknocgsw Cutting height: 400 mm band speed: 15 - 940 m/min Table dimensions: 800 x 820 mm mm machine weight approx.: 1000 kg dimension machine approx.LxWxH: 1,3 x 1,3 x 2,2 m

Condition: used, machine/vehicle number: 008441, Max. panel width: 1100 mm Bedpfoyz Slbjx Acgoww Max. panel length: 5700 mm Max forward speed: 30 mt/min Number of shafts: 1 Motor Power: 90 KW

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 27 mm saw band length: 2910 mm saw band width: 0,9 mm span width: 320 mm dimensions of saw-band: 2910 x 27 x 0,9 mm band speed: 20 - 120 m/min electrical connection: 400/50/60 V / Hz. total power requirement: 1,5 kW machine weight approx.: 390 kg dimension machine approx.LxWxH: 1480 x 1700 x 2000 m Fully hydraulic lowering and lifting function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off after completion of cut, return of the saw arm to starting position Torsion-resistant saw frame made of cast steel (multiple ribbed) Hydraulic short-stroke cylinder for vise Precisely ground carbide saw blade guides, adjustable Bwsdpfx Ajy E Hynscgjw Electric coolant pump Manual band tension with display, including electrical monitoring of saw band and cutting pressure Hydraulic vise (opening and closing) Chip removal brush, running synchronously Large, solid round support table, rotates during miter cuts with predefined cutting channel; miter adjustment manual, readable via scale Material stop 500 mm with scale Incl. saw blade with combi toothing 4/6 Roller conveyor sections: 2 pieces of 3 m and 1 piece of 2.55 m. *

Condition: excellent (used), Year of construction: 2004, 1 used, very well-maintained fully hydraulic circular cold saw automatic with flat vertical guides Max. saw blade diameter: 325 mm Cutting capacity at 90°: - Round: 100 mm - Square: 85 x 85 mm - Rectangle, flat: 165 x 85 mm Infinitely variable speed range: 20 - 100 rpm Max. saw blade dimensions: 325 x 3.0 x 40 mm Single stroke feed: up to max. 550 mm Multiple stroke feed: for lengths over 550 mm Working height: 930 mm Drive power: 3 kW / 400 V Machine dimensions (L x W x H): 2150 x 1450 x 1950 mm Weight: approx. 650 kg Accessories / Special Features: • Fully hydraulic design • Fully automatic operation, single cuts also possible • Vise feed • 90° cutting angle • Infinitely variable speed range 20 - 100 rpm • Length setting via programming on the control panel • Cutting speed and feed can be continuously adjusted on the control panel during operation • Single and multiple stroke feed • Adjustable flat vertical guides • Coolant system • Micro-spray system • 1 used saw blade included Bwjdpfx Aey E Uk Iscgjw • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Pendulum Saw Bottene Motor power: 3.7 kW, 380 V, 50 Hz Maximum saw blade diameter: 500 mm Cutting height: approx. 120 mm Maximum throat: 500 mm With roller table and longitudinal fence on the left, 3000 mm Bwodpfxsydnito Acgew With roller table on the right, 1000 mm Extraction diameter: 120 mm Approx. dimensions (L x W x H): 4200 x 1150 x 1650 mm Weight: approx. 200 kg Saw can be swiveled to the right Saw and roller table mobile Including saw blade Note for used machines: • Technical details and intermediate sale subject to change. • Prices are ex location and refer to self-collection – free loading at site! • The machine has been cleaned and function-tested. • All machines are sold as inspected, with no guarantee or warranty whatsoever. Buyers are welcome to inspect the machine on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Bwedpfx Aoxz Dqmscgsw Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2014, I sell the 2-spindle horizontal multirip saw of polish production Walter OP-500. Year 2014. Suitable for cutting round wooden logs with 2 Spindles. Cutting width 120 - 350mm. Motors 23,8 + 23,8 KW. Total power 54,2 KW. Diameter of main saw blade max. 500mm. Feed speed controlled by variator up to 20m/min. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately. Bjdpewini Eefx Acgjww

Condition: good (used), Year of construction: 1997, I sell the double mitre saw OMGA TI2500 Super. Cutting length 230 - 2500mm Cutting width max. 1500mm Cutting height max. 115mm Saw cutting aggregate main blade + scoring blade each side. Fully tilting - 45 up to + 45 ° 2 Motors x 4,0kW (5,5 HP) Good condition. Available immediately. Bjdpfxoxtxh Do Acgoww

Condition: new, Band saw blade Make Röntgen Bwsdsrwl R Nopfx Acgjw Type bi-alfa cobalt Dimensions :4860 x 34 x 1.1 mm 3/4 Combi 10 unused, out of magazine

Condition: new, Year of construction: 2026, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID Double Miter Bandsaw GBS 250 Super AutoCut, Speed: 35 + 70 • Miter angle left: 60° + right: 45° • Quick-release clamping device, adjustable • Solid clamping device + machine casting Bodsr Ik Sqopfx Acgeww • Ball-bearing swivel table • Hydraulic brake cylinder • Large, robust material support • Cooling system • Worm gear running in an oil bath • Enclosed saw frame • Adjustable ball roller bearing • Tool compartment – door in the base • Cutting monitoring via ammeter • Cutting pressure feed rate regulator • Support roller (infeed side) • Machine base (delivered disassembled) GBS 250 Super AutoCut 3-Stage System: I. Automatic saw frame lowering via the hydraulic cylinder, steplessly adjustable feed rate, with limit switch at the end of the cut II. Fast lowering of the saw frame to the workpiece, then switching to normal sawing feed. (e.g., for scoring) III. Hydraulic cylinder acts as a brake cylinder: a) Manual operation (e.g., for ejecting) or b) Lowering in the rest position Saw band dimensions: 2765x27x0.9mm Additional accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication, etc. available upon request! Delivery time: from stock in Waiblingen, Beinstein.

Condition: excellent (used), CATALOGUE NUMBER 7680 TECHNICAL SPECIFICATIONS - max. blade diameter 500mm - spindle diameter 30mm - hydraulic blade stroke - max. cutting width 500mm - max. cutting height (in the centre, with a 500mm blade) 160mm - main motor 4kW - table dimensions 715x1070mm - table height from the base 790mm - 2 roller tables - table dimensions: - infeed table length/width 2000x640mm - outfeed table length/width 2000x640mm - machine dimensions length/width/height 1400x940x1070mm - total weight 480kg Bwsdpjztapiefx Acgow ADVANTAGES – 2 roller tables – hydraulic blade stroke – used saw, very good condition Net price: 15900 PLN Net price: 3700 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), Technical data: Motor power S6: 1150 W Motor power S1: 1100 W Voltage: 400 V Dimensions: Swivel range: 0° - 45° Table size: 500 × 400 mm Bsdpez I R Uvjfx Acgeww Overhang: 380 mm Table height: 990 mm Exhaust connection: 100 mm Cutting performance: Max. cutting height at 90°: 220 mm Cutting width at the rip fence: 240 mm Band saws: Saw blade: 2950 mm Wheel diameter: 400 mm

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Note: Operator terminal and angle scale on the right side! Cutting length: 3200 mm Max. saw blade overhang: 100 mm Feed rate, continuously variable: 5-100 m/min; return speed: 130 m/min Saw carriage guided on round shafts Drive via gear and rack and pinion system Automatic cutting length detection via laser sensor on the saw carriage Quick-change system for main and scoring saw blade (ProLock) Cutting direction against the stop Motor: 13.5 kW, total connected load: 18 kW, rated current: 38 A Electronic cutting height adjustment (continuously variable) for the sawing unit Raising and lowering of the sawing unit by means of a positioning drive Dimensional measurement via non-contact magnetic measuring system Including nesting program Scoring saw adjustment, horizontal and axial, from the control panel via electric servo motors Scoring saw unit with pneumatic lowering, scoring saw motor 2.2 kW Manual pressure regulators for package clamps and pressure bar for sensitive materials Tilting table on the left: 2300 x 600 mm with air cushion Solid stop rail with 2000 mm 2 side tables, 2300 mm with air cushion Material pusher, cutting length 3200 mm Feed rate: 25 m/min; return speed: 80 m/min Rear support table with 9 double roller tracks Package clamps, 6 pieces, 2-finger design, opening height 80 mm 3 veneer stops for cutting panels with protruding veneers Device for automatic positioning of the trimming position by the material pusher Lateral pressing device for workpieces from 20 to 1200 mm Modular control system with 24" TFT flat screen Bwsdj Adv Ruspfx Acgow PC with Windows 7 Pro operating system With thermal label printer Availability: approx. January 2027 Location: North Rhine-Westphalia

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,020 mm, saw blade diameter: 500 mm, total length: 6,100 mm, type of input current: three-phase, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, overall weight: 1,600 kg, The machine is currently undergoing refurbishment; further photos will follow. Classic Magic 500 TU5 -Double miter saw with program/positioning control -Electrically adjustable saw head, speed V = 20 m/min -Saw blade diameter 500 mm Bwodpfo Afbtwex Acgew -Saw blade bore 32 mm -Max. cutting length 5,200 mm; automatic extension up to 10,000 mm possible for oversized parts -Min. cutting length at 90° = 225 mm -Horizontal pivoting of the saw heads -Miter angle range from 90° to 22.5° (outward) -Saw heads with automatically controlled full protective guards -Profile support roller track (right) -Pneumatic material/workpiece clamping The machine comes with the following accessories: -Cleverbridge for data transfer via USB or RJ45 -Long roller track -Additional tensioner on the roller track -Horizontal + Vertical tensioners -Macro function (ideal for mosquito screen manufacturers) -Oversized part cutting -Shortcut function -Cross-cutting -Automatic cutting -Automatically extending profile support

Condition: reconditioned (used), Year of construction: 2002, KASTOpos GA 4" Fully automatic miter bandsaw machine – KASTO Type/Model: KASTOpos GA 4 Condition: Used, partially overhauled in 2026 Year of manufacture: 2002 Work performed / partial overhaul • Machine thoroughly cleaned and technically inspected • Machine housing and machine body repainted • Mechanical, hydraulic, and electrical functions checked • Saw blade, material clamping device, and feed system checked and adjusted • Band guide and all machine movements checked for proper function • Safety and control elements checked • Necessary repair work carried out as part of the partial overhaul • Final complete functional test performed • Roller conveyor disassembled, cleaned, technically inspected, and repainted • Rollers and bearing points of the roller conveyor checked • Roller conveyor then reassembled and functionally tested Bsdpfxsz Sqlkj Acgjww The machine is in technically sound and visually well-maintained condition. This is a partial overhaul, not a complete mechanical general overhaul. Technical data Cutting range at 90°: Round 400 mm, Flat 400 x 320 mm, Square 320 x 320 mm Cutting range at 45°: Round 320 mm, Flat 320 x 320 mm, Square 320 x 320 mm Cutting range at 60°: Round 240 mm, Flat 210 x 320 mm, Square 220 x 220 mm Cutting speed, stepless: 16 to 160 m/min, frequency-controlled Material feed (single stroke): max. 750 mm Shortest remaining piece length: Automatic: approx. 100 mm Single cut: approx. 10-30 mm Saw motor power: approx. 4.4 kW Total connected load: approx. 7.4 kW (380 V / 50 Hz) Machine weight: approx. 3,000 kg Inquiry item: Shipping costs will be provided in a separate quote.

Condition: new, Cutting height 175 mm Motor output 15 kW cutting width 620 mm Cutting length 5200 mm Dimensions (L/W/H) 7000 x 1470 x 850 mm Bwodpfx Ajz St R Ajcgsw

Condition: used, Year of construction: 1995, Technical details: cutting diameter: 300 mm Bedpfx Aszp Iu Sscgsww saw band length: 3200 mm saw band width: 25 mm dimensions of saw-band: 3660 x 25 x 0,9 mm electrical connection: 400/50 V / Hz. total power requirement: 1,1 kW work height max.: 650 mm machine weight approx.: 960 kg cutting speed: 15 - 95 m/min dimension machine approx.LxWxH: 2,2 x 2,0 x 1,3 m The Klaeger & Müller HBA 300 G CNC is a robust, hydraulically operated CNC horizontal band saw designed for precise and economical cutting of solid materials, tubes, and profiles made of steel, stainless steel, aluminum, and non-ferrous metals. Thanks to its CNC control system, it enables the automatic processing of production batches with high repeatability and productivity. The machine is equipped with a hydraulic material feed, automatic saw feed, and infinitely variable blade speed adjustment, allowing optimal machining of a wide variety of materials. Its rigid machine construction ensures smooth, low-vibration operation, excellent cutting quality, and extended saw blade life. In addition, the band saw is fitted with a coolant system that improves blade life and ensures clean, accurate cutting surfaces. The Klaeger & Müller HBA 300 G CNC is particularly suitable for industrial applications in metal fabrication shops, steel construction, toolmaking, mechanical engineering, and serial production. *

Condition: excellent (used), CATALOGUE NUMBER 7906 Technical data: - track width 400mm - working width of the roller 400mm - max. blade diameter 450mm - blade bore diameter 70mm - max. cutting height 160mm Bwedpozx Rqhsfx Acgjw - table width with extension 720mm - table length 1900mm - from above: - feed fingers/ejectors 2 rows - sliding roller, metal, pressure roller - feed fingers/ejectors - sliding roller, metal, pressure roller - saw mandrel - smooth sliding roller, metal, sliding - from below: - guide rail - feed fingers - track - electric body lifting - central track lubrication - 2 feed speed types + stepless - feed motor 0.9kW - main motor 30kW - diameter of the dust extraction nozzle 260mm - overall dimensions (L/W/H) 2350x1800x2200mm - weight approx. 2000kg ADVANTAGES – Made in Italy – New track and slides – Very good condition – Used multi-blade saw Net price: 55900 PLN Net price: 13000 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: used, Year of construction: 2002, Used Machine Year of manufacture: 2002 Features and technical specifications: Bsdpfx Acjzycqvogsww - Cutting area: 4200 x 4200 mm - Maximum cutting height: 80 mm - Saw blade overhang: 92 mm - Main saw motor: 11 kW - Scoring saw motor: 2.2 kW - Total electrical power rating: 19.5 kW, 41 amps - Required air pressure: 8 bar - Exhaust capacity: 4,000 m³/h - Sawing speed, continuously variable: 0–70 m/min - Rip fence speed: 0–80 m/min (maximum output: 25 m/min) - Main saw blade: 350 x 4.4 x 30 T 72 TF - Scoring saw blade: 180 x 4.4/5.4 x 30 T 28 VR (tapered) - Weight: approx. 6,000 kg

Condition: excellent (used), SCM 320cm Linvincibile Si3 panel saw 320cm carriage, 0-45 degree tilting saw head, motorized tilting and up/down adjustment of the saw blade, Bwedpj Ahm R Tefx Acgjw right-hand fence with motorized adjustment up to 1500mm, 1.3KW scoring saw, 2-axis, electrically adjustable, 9KW motor, 3 speeds, max. saw blade diameter 450mm, Fence with electronic displays. Used machine, very good condition.

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with jointing unit (planer unit) and veneer support table Robust machine construction by Langzauner A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 3500mm Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display The crosscut table is very solidly constructed and runs on parallel circular guides; it is slightly offset to the right so that crosscuts can be made on the left side of the veneer packs Angle stop on the support table and on the front support for end cuts of the veneer packs Bjdpfxo Afznuj Acgoww Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from tilting pneumatic workpiece clamping, also holds in the center position Drive motor saw 2.2kW, milling unit 1.1kW The motors can be easily switched on at the handle, so they only run when needed. When switched on, the saw and the milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions using a turret stop. Carbide-tipped precision cutting blade, sharpened Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included Practical front veneer support, automatically extended pneumatically when the planer unit is used Dust extraction connection 150mm with dust extraction channel V-belt renewed CE marking Emergency stop cable Operating manual Onboard tools Original paint, only a few spots have been touched up The machine is in excellent condition and has obviously only been used rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this provider".

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOGUE NUMBER 7563 Technical data: - track width 340mm - shaft width 360mm - disc bore diameter 70mm - max disc diameter 315mm - max cutting height 180mm * from above - feed shaft, toothed, pneumatically pressed - 2 rows of ejectors - 3 smooth, sliding pressure rollers - ejectors - shaft with saws - 3 smooth, sliding pressure rollers - ejectors * from below - feed shaft, toothed - track - shaft with saws - track - stepless feed speed adjustment via frequency inverter - main motor 2x55kW - feed motor 4kW - electric lifting of the upper body up/down - electric adjustment of the saw shafts - central lubrication - diameter of the dust extraction nozzle 2x150mm - dimensions L/W/H 2800x2400x1900mm Bodpfezxqtvsx Acgjww - weight approx. 5000kg ADVANTAGES – Made in Italy – Two-shaft – Ideal for large components – Multi-blade saw, used, very good condition Net price: 129900 PLN Net price: 30209 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to significant fluctuations)