Used Nt 551 for sale (8,659)

Condition: used, machine/vehicle number: 007601, X axis working area: 4320 mm Y axis working area: 2245 mm Fsdpfx Aeu N Skfoa Nepg Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 16 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 006089, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 30 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Fsdpfx Aasy Nknwj Nspg

Condition: good (used), Year of construction: 1989, functionality: fully functional, Controller Heidenhain TNC355 Table size 925 x 380 mm Max. table load 420 kgs X-axis 760 mm Y-axis 410 mm Z-axis 450 mm Spindle taper ISO40 Spindle power 5.5 kW Fpodpfxsy Hu Szo Aa Njg Tool magazine 20-position Max. spindle speed 6000 rpm Power requirement 18 kVA / 380 V / 32 A Weight 3300 kg Dimensions (L x W x H) 3200 x 2600 x 2500 mm Accessories, equipment - Coolant system - Machine mounths

Condition: good (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 957.5 kW (1,301.84 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,847 kg, input voltage: 400 V, total width: 2,500 mm, total length: 7,240 mm, total height: 2,400 mm, warranty duration: 6 months, Dry-cooler THERMOKEY JGH2590CD 4QRA 957.5 KW Cooling capacity: 957.5 kW (40/35 — +25C) Year of manufacture: 2016 Fluid: Glycol + Water Fpedpfx Ajy Rp Ncsa Nog Fluid flow: 180.23 m³/h Air flow: 266245 m³/h Number of fans: 10 pcs. Fan Diameter: 900 mm Volume: 483 dm³ External surface: 2864 m² Dimensions: 7.24 x 2.5 x 2.4 m. Weight: 2847 kg. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 364 kW (494.90 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,100 kg, input voltage: 400 V, total width: 2,250 mm, total length: 4,450 mm, total height: 2,420 mm, warranty duration: 6 months, heating capacity: 160 kW (217.54 HP), Aircooled chiller/Heat pump YORK YCPB 420 364 kW/406 kW Cooling capacity: 364 kW / 103.5 tons (12/7 — 35°C) Heating capacity: 406 kW / 115.44 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Economizer. Refrigerant circuit: 2 pcs. Fpsdpjy Rknmefx Aa Nsg Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Danfoss PSH105A4EPA (scroll) + 2 pcs. Danfoss PSH065A4EPA (scroll) Type of refrigerant: R454B Number of fans: 7 pcs. (Frequency inverter) Dimensions: 4.45x2.25x2.42 m. Weight: 3100 kg. Working hours: 107/80/98/58 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 520.6 kW (707.82 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,756 kg, input voltage: 400 V, total width: 2,250 mm, total length: 4,850 mm, total height: 2,400 mm, warranty duration: 6 months, Aircooled chiller YORK YLAA0517HE 520.6 KW Cooling capacity: 520.6 kW / 148.03 tons (12/7 — 35°C) Year of manufacture: 2023 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 6 pcs. Bitzer GSD80385VAB462 (scroll) Type of refrigerant: R410А Number of fans: 8 pcs. Dimensions: 4.85x2.25x2.4 m. Weight: 3756 kg. Working hours: 3/2/3/2/2/3 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT Fedpjy Rkh Tofx Aa Njpg The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2005, Straight Machine PQC-U: Print Quality Control Unit KPC: Semi Autmatic Plate Change Chromed Impression Cylinder Chromed Plate Cylinder Fpedpfx Ajyvlg Iea Njg Powder Sprayer Automatic Blanket Washing Device Automatic Ink Roller Washing Device Plate Cylinder Cocking Impression Account: 45 Mio.

Condition: used, mileage: 4,57,690 km, power: 375 kW (509.86 HP), first registration: 09/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,600 mm, color: red, driver cabin: other, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, onboard computer, parking heater, traction control, Permissible total weight: 18,000 kg, 1st axle: 385/65 R22.5, 2nd axle: 315/70 R22.5, leaf-air suspension, retarder, digital tachograph, fifth wheel coupling, electronic braking system (EBS), electronic stability program (ESP), traction control system (ASR), stationary air conditioning, air-suspended driver's seat, armrest for driver/co-driver, automatic driving lights, radio, digital radio reception (DAB), adjustable steering column, electric windows, roof hatch, external temperature display, fog lights, electrically adjustable exterior mirrors, curb mirror, immobilizer, tinted glass, sun visor, aerodynamic package, refrigerator, work lights, daytime running lights, cup holder, rubber flooring, insulated cab, telematics system, digital instrument cluster, speed limiter, subject to errors and change. Brake pads: front axle 99% - rear axle 98%, no service due, upcoming service as follows: S12: 04.27, axle oil: 07.27, engine oil 10.27, gearbox oil: 06.28, steering front axle 12.29, coolant 04.30. Fpedpfx Aajy Ihlks Njg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 17,577 h, clamping force: 1,600 kN, total height: 2,060 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Additional equipment • Sepro Robot SDR 11 Fsdpsx D Hnmofx Aa Njpg Machine Benefits Technical Machine Benefits • Clamping unit: 160 / locking force: 1760 kn / opening stroke max: 495 mm / mould installation height, min: 275 mm / mould installation height, max: 585 mm • Platen distance, max: 1080 mm / mould mounting platens (h x v): 760 x 785 mm / clear column distance (h x v): 520 x 520 mm • Ejector travel: 125 mm / ejector force: 35 kn • Injection unit: 340 / screw diameter: 35 mm / l/d ratio: 20 / injection flow (ps) without accumulator: 288 cm³/s • Metering stroke: 162 mm / nozzle stroke, max: 350 mm / nozzle immersion depth (svo): 20 mm / nozzle contact pressure: 30 kn • Material hopper capacity: 35 l / injection speed, max. , standard: 300 mm/s / injection speed, max. , increased: 500 mm/s • Net weight without oil filling: 7300 kg Extra Information Electrical & Pneumatic Interfaces: Sockets: 2 x Schuko (1Ph, 230V, 10A)/ 2 x IECEE (3Ph, 400V, 16A) – switched off via main switch/ Additional Schuko socket also listed (same rating)/ Valves: 1 x Pneumatic 5/2 valve on movable platen (programmable)/ 2 x Pneumatic 5/2 valves on stationary platen (programmable)/ I/O: 3 digital inputs / 3 digital outputs (freely programmable)/ Terminal board outside control cabinet/ Air & Cooling: Central air supply and piping/ Cooling system: open cycle/ Cooling water controller: 4 circuits with temperature indication (max. 10 l/min per circuit)/ Separate water connection for cooling (mould + machine)/ Switch-off for mould cooling (time programmable)/ Machine Mechanical & Motion Features: Clamp and injection unit colours: Jet black (RAL9005): bed, pump station, lower control cabinet/ Signal white (RAL9003): clamp unit, injection unit, guards, covers, safety doors/ Mould platen layout: E-standard (similar to EUROMAP, March 1996)/ No side ejector platen/ Ejector: held in front position against spring-loaded mold ejector/ Standard mold height/ Standard closing speed/ Only active movement when safety guard is closed/ Screw: wear-resistant, nitrided barrel, standard L:D, 35 mm diameter/ Non-return valve: 3-piece ring type/ Control, Programming & Monitoring: Inputs/outputs and clamp sequence: freely programmable/ Switching programs (e.g., dry cycle, startup scrap counter, timer-controlled cooling)/ Injection process: Injection force with max injection speed: 200 mm/s/ Back pressure programmable via 6-point polygon/ Follow-up pressure switch-over based on melt pressure/ Follow-up, back pressure, metering: closed-loop control/ Feed throat temp control: closed-loop, max 90°C ±9°C/ Reduced nozzle sealing force (programmable)/ Clamp force: closed-loop control/ Active mold protection: sensor-based during closing/ Hot runner control: 5 zones integrated (2.75 kW total) Display, Software & Data: Coloured data display PDA (Process Data Acquisition): 100% control with graphical parameter recording/ Overlaid graphs for multiple cycles/ External statistical data export/

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), first registration: 05/2026, fuel type: diesel, overall weight: 3,230 kg, color: black, gearing type: automatic, number of seats: 5, total length: 5,406 mm, total width: 1,918 mm, total height: 1,884 mm, loading space length: 1,651 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Internal number: Subject to errors and prior sale! Fuel consumption data pertains to base vehicle prior to conversion. ---- SPECIAL EQUIPMENT * Tow bar - 13-pin - for 3.5 t towing capacity - 90° tailgate opening angle - Ball head height approx. 50 cm (center) * Load compartment protection tray "sprayed" 12-volt socket on the flatbed * Winter Package 1: leather steering wheel, heated - front seats, heated * Kunath conversion: Snow plow type Western Defender 72 (steel, 218 cm wide, PE cutting edge, auxiliary headlights, remote control in driver’s cab, HARTING industrial connector) - Beacon - Spreader (SALTDOGG 500 ltr. electric salt spreader, plastic hopper, electric material agitator) FURTHER EQUIPMENT * ABS * Front tow hook * Four-wheel drive (switchable) with electronic gear selection * Exterior mirrors electrically adjustable, heated * Battery management system * Roof lining made of light woven fabric * Illuminated roof console * ESP * Electric windows * High beam assist * Ford Easy Fuel - comfort fuel cap and misfuelling prevention * FordPass Connect incl. eCall and WLAN hotspot * Heated windscreen * Glovebox with lid * Easy Lift tailgate * Electrically locked tailgate, without lock cylinder * Heated rear window * Electrochromatic interior mirror * 8-inch digital instrument cluster * Front air conditioning incl. dust and pollen filter * Load stop with protective frame at rear of cab * Multi-function steering wheel Fpedsyumruspfx Aa Neg * Front center console with integrated armrest * Fog lights * Package: Wheel Package 9 - 4 alloy wheels 7.5 J x 17 with 255/70 R17 All-Season tires, Dark Sparkle - Spare wheel 17-inch steel wheel * Package: Rear seat 15 - 3-person bench seat with three height-adjustable headrests, three 3-point seatbelts, center armrest, and fold-up seat cushion - Seatbelt warning buzzer front and rear - ISOFIX mounts on outer seats * Package: Safety Package 3 - Advanced airbag restraint system - Front passenger - Deactivation function for front passenger airbag - Driver front airbag - Driver and passenger seats with reinforced side bolsters - Knee airbag for driver and passenger - Curtain airbags above side windows - Side airbags for driver and passenger - Reinforced body construction - Reinforced frame * Package: Seat 36 - Driver’s seat, 6-way manually adjustable - Passenger seat, 4-way manually adjustable - Map pocket on backrest of driver’s seat * Package: Technology Package 19 - Adaptive cruise control incl. intelligent speed limiter - Lane keeping assistant and drowsiness warning - Rear Park Pilot system - Reverse parking assistant with braking function - Reversing camera with Split View technology * Particulate filter: Diesel particulate filter (DPF) with SCR catalytic converter * Upholstery: Fabric * Pre-Collision Assist incl. distance display and warning, forward collision warning system, and active emergency brake assist * Radio: Audio system 44: audio system incl. Ford SYNC 4A, AppLink, and 10-inch touchscreen - FM/DAB antenna - 6 speakers - Android Auto and Apple CarPlay - Bluetooth hands-free kit and audio streaming - Digital user manual - Remote control on steering wheel - Ford Power-Up software updates (over-the-air update) - Intelligent suggestions for frequently used destinations, search terms, or phone contacts - Customizable user profiles - Radio player - USB port - Sp...

Condition: used, mileage: 1,96,437 km, power: 125 kW (169.95 HP), first registration: 09/2022, fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,050 mm, total width: 2,030 mm, total height: 2,940 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, 1425. N202132 Fjdpfx Aaox S Awve Njpg Special equipment: 1 DIN slot at the front below the dashboard on the passenger side, passenger airbag, single-pole battery isolator switch, passenger-oriented gear console (without storage compartment, right center console), DAB tuner (digital radio reception), driver assistance system: active brake assist, chassis: stabilization level II, induction charging tray for smartphone (wireless charging), folding lid for storage compartment, terminal strip for electrical connections (driver’s seat box), fuel filter with water separator, front PTO with mount for additional coolant compressor, multimedia system MBUX (7" touchscreen), smoker package, spare wheel carrier at rear end of frame incl. jack, interior rearview mirror, windshield wipers with rain sensor, front mud flaps, seat belt system with warning device (passenger side), cab seats: passenger double bench, cab seats: driver comfort seat, USB port centrally below dashboard (charging only), rear wall trim, reinforced front axle, jack, heat-insulating glazing (windscreen with top band filter) Additional features: Overhead storage compartment above windscreen, rear towing eye, adaptive brake light, driver’s airbag, traction control (ASR), washer fluid level indicator, electrically adjustable and heated exterior mirrors, both sides, external temperature display, cab roof lining, automatic headlight activation, electronic brake-force distribution (EBD), driver assistance system: crosswind assist, 200 A alternator, external noise reduction measures, body/structure: standard flatbed, Keyless-Start, communication module (LTE) for digital services, fuel tank: main tank 71 L, steering wheel (mechanically adjustable steering column), headlight range adjustment, truck registration, side marker lights, Mercedes-Benz emergency call system, engine 2.0 L – 125 kW CDI CAT, wheelbase 3665 mm, low emission according to Euro 6d, seat belt system with warning device (driver side), seat trim/upholstery: fabric, Assyst maintenance interval display, gross vehicle weight rating 3.50 t, and much more. Vehicle not prepared, subject to errors and prior sale.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Control: Siemens 840D Spindle bore: 65 mm Speed: 4,000 rpm Tool holder: VDI 30 Main and counter spindle with C axis Fpsdpfx Aey Rr U Usa Njg TOOL CARRIER I (XZ) Technology: Cross slide (3x) Travel: X= 70, Z= 115 mm Tool Carrier II (X/Z) Turret with 7 stations and subspindle All stations driven (3,000 rpm) Travel: X= 160, Z= 450 mm Tool Carrier III Turret with 8 stations Travel: X= 150, Z= 200 mm Tool Carrier IV (rear side) Turret with 8 stations 3 tool holders for rear side EQUIPMENT - Chip conveyor - Bar feeder IEMCA MASTER 80/33 HF

Year of construction: 2015, operating hours: 44,309 h, condition: ready for operation (used), total width: 13,550 mm, total height: 7,510 mm, pressing force: 408 t, product length (max.): 18,000 mm, This FRIMO NFPP Thermoforming Plant was manufactured in 2015. It features a powerful HOP400 press with a force of 4000 kN and a press area of 2500 x 1800 mm. The plant dimensions are 18,000 mm in length, 13,550 mm in width, and 7,510 mm in height. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO NFPP Thermoforming Plant we have for sale. Contact us for further details. • Application: Door panel FAT/FOT (Left Hand / Right Hand) • Connected Load: 692 kW • Rated Current: 1000 A • Voltage: 400 V AC / 24 V DC • Frequency: 50 Hz • Operating Pressure (Pneumatic): 5–7 bar Fpsdpoy Rpk Hofx Aa Nsg • Air Consumption: < 300 l per cycle • Pneumatic Connection: G 1/2 • Pneumatic Air Quality: Dried / Un-oiled • Ambient Temperature Range: 15–40 °C • Relative Humidity: 20–70% (non-condensing) • Noise Level: < 82 dB • Main components included: • HOP400 Press: 4000 kN press force; 2500 x 1800 mm press area; approx. 79,000 kg • HOP300 Calibration Press: 3000 kN press force; 2100 x 1300 mm press area; approx. 24,000 kg • Feeding Table: 2400 x 1800 x 1100 mm • Hydraulic units for form and calibration presses • Tool change systems (Left and Right)

Condition: used, machine/vehicle number: 008392, Max. panel width: 4500 mm Max. panel length: 2200 mm Main saw blade projection: 127 mm Fpsdpfxox Swb No Aa Nog No of Grippers: 9 Panel Rotation Station: yes Thin sheet loading: yes Vacuum sheet loading: yes

Condition: good (used), Year of construction: 1992, Centre lathe WEILER Type: PRAKTIKANT 160 B, Year of manufacture 1992, equipped with 3-axis digital readout Heidenhain, 160 mm RÖHM chuck, Multifix B tool holder, tailstock with centre, collet clamping device with collets from 1 to 29.5 mm, coolant system. Turning diameter over bed: 320 mm Turning diameter over cross slide: 198 mm Turning length: 650 mm Spindle bore: 40 mm Fpjdpjy Rpr Refx Aa Njg Spindle speed: 96 – 2500 rpm Further data see machine card. Guideways are in good condition, machine documentation available.

Condition: new, empty load weight: 8,050 kg, maximum load weight: 36,950 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, FIRE-galvanized, reinforced design, air-sprung with lift axle, axle load gauge for axle load, length high bed approx. 4,180 mm, length low bed approx. 9,400 mm, loading height approx. 900 mm, front wall approx. 1,600 mm high, 14 x stanchion pockets in outer frame, 3 x cross stanchion rails, 24 x lashing eyes, 4 pairs of container locks for, 2 x 20 ft. ISO container or 1 x 40 ft ISO container, , Surcharge for, aluminum ramps = price: 1.900 ¤, , , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Fjdpfxoy N Rvuo Aa Nopg

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Fsdpoy N Sw Tofx Aa Nepg Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: used, Collet set, chuck collet holder for draw-in collets WEILER Collet chuck, collet holder, collet device Suitable for WEILER Praktikant lathe, year of manufacture 1984 Draw-in collet type: FM 613 / 386E DIN 6341 Collet diameter: 32 mm Collet length: approx. 115 mm Collet thread: TR 32 x 1.5 mm - Collet holder sleeve with MK 5 external taper (Ø 44 mm) - Draw tube with internal thread M 32 x 1.5 mm, handwheel for manual tightening of the collet Fpodpfx Ajy Ra Dqea Nog - 15 pieces FAHRION collets: Ø 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80 mm - fits WEILER Praktikant and should also fit WEILER Matador Total weight: 10.5 kg Very good condition

Condition: ready for operation (used), functionality: fully functional, container length: 40 ft, 40-foot HighCube / sea container / XXX ✅ You always get dealer prices from us! ✅ We offer used 40-foot HighCube storage containers / sea containers. Details: - Model: 40ft-HC, storage container / sea container made of steel (used) - Condition: ◦ Wind and watertight ◦ Cargo worthy (suitable for international transport) ◦ Repaired and ready for immediate use ◦ With valid CSC sticker (comparable to a TÜV sticker) - Equipment: ◦ Wooden floor Fsdjwu Tk Eopfx Aa Nepg Additional services: - Individual adaptations as required (e.g. conversions or specific adaptations) - Fast delivery directly to your location - Delivery & unloading possible nationwide and internationally (for an additional charge) Simply send us the zip code of the delivery address. Prices on request! We will be happy to provide you with a customized offer. For further questions or advice, please call us.

Condition: new, Year of construction: 2025, machine/vehicle number: ZGS200, 200 l Capacity * 7.5 kW high-performance three-phase drive motor. * Adjustable speed control up to 300 rpm. * Control panel and dosing pump included. - The dosing pump automatically adds the chemical to the tank * Working hours timer * PLC panel programmable on request * PU or INOX plate * Replaceable valve for wastewater drainage. * Inner tank features channels and cavities to ensure a non-stick wall. Fjdow Hb Tfspfx Aa Nepg

Condition: new, Year of construction: 2026, functionality: fully functional, Tank Container: 20-foot steel box container with integrated 25,700-liter polyethylene tank (wall thickness 1 cm). Suitable only for non-hazardous products (water, oils, alcohol, etc.), not for ADR substances. Temperature down to -40 degrees Celsius. Original images. 1. Condition: new, unused, with valid CSC plate 2. Volume: 25,700 liters 3. Decompression valve 4. Working pressure closure: 7 bar 5. Spare parts included: decompression valve, outlet valve, manhole cover 6. Color of your choice included 7. Company logo included 8. Tank removable 9. Transport: Free & non-binding quotation for delivery (including unloading if requested) – simply provide your postal code. 10. Original images 11. Available immediately from Hamburg Fjdpfoy N Sxdjx Aa Njpg We look forward to your inquiry! NAUTEXA GmbH

Condition: like new (used), Year of construction: 2010, operating hours: 76,482 h, turning length: 800 mm, turning diameter: 430 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 455 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 6,000 rpm, feed length X-axis: 455 mm, feed length Z-axis: 430 mm, workpiece weight (max.): 5 kg, total height: 8,500 mm, total length: 2,500 mm, total width: 2,495 mm, overall weight: 8,500 kg, CNC controller: Fanuc FS31IA5 (MAPPS 4) Capacity Turning length mm: 800 Max. turning diameter mm: ø: Ø430 Turn-mill spindle X-axis travel mm: 455 Z-axis travel mm: 800 B-axis degree: ±120 (0.001º) Speed spindle rpm: 12000 Drive power kW: 9/5.5 Y-axis travel mm: ±105 Tool magazine Magazine places: 76 Tool holder: Capto C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Lower turret X-axis travel mm: 160 Z-axis travel mm: 730 Number of tool slots St .: 10 Main spindle Speed spindle rpm: 6000 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 7.5/5.5 Chuck type: Solid Chuck (8") Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Fedoy Rpq Topfx Aa Nepg Coolant gun Working time hours Under power: 76482 Spindle 1: 14010 Spindle 2: 4306 Potencial nominal kVA: 48 Basic machine dimensions / weight Length mm: 2500 Width mm: 2495 Height mm: 8500 Weight kg: 8500

Condition: new, Year of construction: 2025, container length: 20 ft, loading space volume: 13 m³, 🚢 20ft Lagercontainer – Neuwertig (Baujahr 2025 / 2026) – Sofort verfügbar! Hochwertiger Seecontainer in nahezu neuwertigem Zustand – perfekt als Lagerraum, Werkstatt, Baustellencontainer oder für den professionellen Transport. ⭐ Ihre Vorteile auf einen Blick 🆕 Baujahr 2025 / 2026 – neuwertig 💪 Sehr stabile Stahlkonstruktion (2 mm Wandstärke) 🌧️ Wind- & wasserdicht 🔐 Sicher verschließbar mit 4-fach Türriegel 🚚 Mit CSC-Plakette – weltweit transportfähig 🌬️ Mit Belüftung gegen Feuchtigkeit 🪵 Hochwertiger Holzfußboden 🛠️ Gabelstaplertaschen im Boden 📏 Maße & technische Daten 📐 Außenmaße: 6.058 × 2.438 × 2.591 mm 📦 Innenmaße: 5.898 × 2.350 × 2.390 mm 🚪 Türöffnung: 2.343 mm 🧱 Volumen: ca. 33 m³ ⚖️ Eigengewicht: ca. 2,25 t 🏋️ Zuladung: bis 30 t Diese Container überzeugen durch ihre Langlebigkeit, Sicherheit und Vielseitigkeit – ideal für Gewerbe, Baustelle, Handwerk oder anspruchsvolle private Nutzung. Fodpfx Aaog S Awpo Nepg 📬 Jetzt anfragen – wir erstellen Ihnen ein individuelles Angebot! 👀 Weitere Containergrößen & Varianten verfügbar. 🚛 Lieferung deutschlandweit möglich (gegen Aufpreis).

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Used 5-axis CNC machining center Manufacturer: Homag Model: Centateq 110 (5-axis) Year of manufacture: 2021 Last manufacturer service: 18.05.2026 Console table with LED indicator for suction cup positioning, Fpodpfxsy Nzc Sj Aa Neg 6 manually adjustable consoles (length 1360 mm) each with 3 vacuum cups, 4 support rails Workpiece clamping via vacuum pump 63 m³/h LED system for vacuum clamping units, Working area X 3100 mm Working area Y up to 1250 mm (front stop); up to 1405 mm at the rear with 25 mm tool diameter Working area Z 260 mm / 160 mm with standard suction cups Drilling head with 12 vertical spindles; 6 (4+2) horizontal drilling spindles, Grooving saw, 90° swiveling, max. 125 mm diameter Main spindle DRIVE Future 10 kW, liquid-cooled, 1500 – 24,000 rpm 14-position tool changer (carousel) at the rear and 10-position linear tool changer fixed at the side Aggregate carrier for 2 Z-axes (main spindle + drilling gear unit) Chip conveyor, program-controlled dust extraction hood Power-Control PC 86 POWERTOUCH with Woodwop (incl. Lamello CLAMEX-P component), WoodWop also available for office station (Office Professional version; DXF-Import Basic) UPS for the PC; Tapio Ready-compatible Basic barcode reading system Documentation: German The tools shown, HSK tool holders, drills, etc. are not included in the scope of delivery! Machine available from end of May 2026 The attached PDF file for the machine description refers to the original delivery condition of the machine as delivered by the manufacturer in 2021 and is not binding for the current delivery condition as a used machine.

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, warranty duration: 6 months, type of input current: AC, input voltage: 240 V, ambient temperature (min.): 16 °C, electrical fuse: 16 A, input current: 2 A, input frequency: 50 Hz, ambient temperature (max.): 25 °C, total length: 2,500 mm, total width: 100 mm, overall weight: 150 kg, Equipment: freezer, lighting, Fun Ice SRL is AHT representative in Romania since more than 25 years Universal model, bi-temperature, MT + LT Production year 2021-2022 Fsdpfx Aasy Rfmkj Nepg +250 pcs on stock All equipments are refurbished, but our company is selling the not-refurbished units as well During refurbishment, all the proposed used freezers undergo a full factory restoration, namely: - damages and dents of the case are eliminated; - 3-sides labeled on white RAL9003 / Gray RAL7043 (Optional any RAL or design available on request) - Hygienically cleaned - glass lid seals changed - fully accessorized inside - wall grid set, shelves and dividers - complete testing of the freezers is carried out with preservation of the change statistics and maintenance of the set temperature; - if necessary, repairs are made exclusively by ORIGINAL NEW spare parts from the manufacturer (AHT Cooling Systems GmbH); (According to the company's policy, donor parts from other freezers are never used for reconditioning) - all freezers are packed in the original factory manufacturer’s transport packaging (AHT Cooling Systems GmbH); (At the request of the customer, it is possible to use reinforced packaging for deliveries over long distances and on bad roads) All reconditioned AHT EQ series freezers are warranted for 6 (six) months for parts, with the exception of consumable and wear materials (refrigerant, gaskets, neon lamps, etc.) - Can be used as a stand-alone unit - Can be used in a line up - Accessories on stock (fixing brackets, top and side covers for multiplexing in a island, glass lid seals, sliding glass lids) - Spare parts available (compressors, inverter, control panel, sensors, fans)