Used Okuma Engine Lathe for sale (166)

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar Dwodov S Svvepfx Adkec - Year of manufacture 2007 - Includes loading robot and loading carousel - Includes chip conveyor - Coolant tank - Available immediately

Condition: used, Year of construction: 2009, turning diameter: 2,000 mm, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,400 mm, feed length X-axis: 1,600 mm, feed length Y-axis: 800 mm, feed length Z-axis: 1,400 mm, workpiece weight (max.): 7,000 kg, total length: 1,400 mm, 5-axis Vertical Lathe Multitasking machine OKUMA VTM-200YB YR2009 Fanuc-18iTB Max work dia: 2,000mm swing: 2,400mm Max work length: 1,400mm Weight: 7,000kg X:1,600 Z:1,400 Y:+-800mm B:90degree Curvic 5degree C:0.001degree Dodpfx Adsvwk Hdekjwc

Condition: used, Year of construction: 2008, Control system OKUMA OSP-P200M. Cooling threw spindle. otating axe A Tsudakoma 250. Accessories: chip conveyor, probe RENISHAW OMP40 and tool probe. Table 1000 x 460 mm Rozsah pojezdů os: Axe X 762 mm Axe Y 460 mm Axe Z 460 mm Spindle 50 - 8000 rpm DIN 40 Dwedpfswrnapsx Adkoc Number of tools in tool changer 48 Machine dimensions 2805 x 2160 x 2746 mm Weight 7100 kg

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: OKUMA, controller model: OSP-E100M, table width: 400 mm, table length: 400 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, spindle nose: BT-40, number of slots in tool magazine: 100, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, Horizontal machining center with 6 multipallets OKUMA model MA-400HA with 100 tools, chip conveyor, spindle through coolant system Dodpfx Aow Slbiodkewc

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 6200 Control Unit Brand Okuma Model OSP P200-L Main Drive Spindle speed range 4200 rpm Spindle motor power 22 kW Number of axis 2 Movement X-Axis Rapid Traverse 20 m/min Z-Axis Rapid Traverse 25 m/min Turret Number of turrets 1 Additional Equipment Spindle oil chiller included Side chip conveyor (hinged belt type) Double foot pedal for chuck and tailstock control Includes transformer, manuals, parts list, and schematics General Data Machine weight 6200 Control Unit Brand Okuma Model OSP P200-L Main Drive Spindle speed range 4200 rpm Spindle motor power 22 kW Number of axis 2 Movement X-Axis Rapid Traverse 20 m/min Z-Axis Rapid Traverse 25 m/min Turret Number of turrets 1 Additional Equipment Spindle oil chiller included Side chip conveyor (hinged belt type) Dodpfx Aew Rhaxedkewc Double foot pedal for chuck and tailstock control Includes transformer, manuals, parts list, and schematics This 2-axis Okuma LB 3000 MY was manufactured in 2008. It features a 12-position turret with all driven tools, C-axis and Y-axis functionality, and a main spindle motor of 22 kW. The machine includes a hydraulic and programmable tailstock, a chuck size of 250 mm, and a bar capacity of 75 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 MY machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1067, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, nominal power (apparent): 28 kVA, torque: 80 Nm, controller manufacturer: Okuma, controller model: OSP-U100L, workpiece height (max.): 500 mm, workpiece weight (max.): 700 kg, table width: 560 mm, table length: 1,300 mm, spindle speed (min.): 40 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 15,000 h, coolant supply: 20 bar, spindle nose: BT-40, number of slots in tool magazine: 20, mount diameter: 40 mm, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, 3-axis machining center with internal cooling through the spindle, 15,000 rpm, permanent oil cooling of the spindle. Various tool holders (collets, drill chucks, Weldon holders, and milling head holders). 3 Gressel-Gripos 125 mm vises as new, additionally tool presetting device PWB Toolmaster 250. Dwedpfew S Nc Rsx Adksc

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller model: P200M, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 64, tool length: 300 mm, tool diameter: 150 mm, Equipment: chip conveyor, Transport, installation, and commissioning – we deliver your machine ready for operation (optional) Machine type: Horizontal Machining Center Manufacturer: Okuma Model: MB-5000H Space Center Djdpfx Asw S Hcbedkjwc Year of manufacture: 12.2010 Commissioned: End of 2011 Control system: OSP-P200M Delivery time: by arrangement 👉Spindle speed 15,000 rpm 👉ConSep coolant filtration system 👉Tool magazine – 64 positions The machining center is in very good overall condition. The machine is suitable for both heavy-duty machining and fine finishing operations. Thanks to its comprehensive basic and additional equipment, including a ConSep coolant filtration system, high-pressure coolant pump up to 70 bar, 64-position tool magazine, dual pallet changer, and spindle speed up to 15,000 rpm, your production becomes significantly more efficient. The machine operates accurately and precisely. Machine features 👉ConSep coolant filtration system with chip conveyor 👉High-pressure coolant pump up to 70 bar 👉Spindle speed 15,000 rpm 👉64-position tool magazine 👉Dual pallet changer Technical data Travel X-axis (column right-left): 760 mm Z-axis (table front-back): 760 mm Y-axis (spindle up-down): 760 mm Rapid traverse X/Y/Z axes: 60 m/min Distance pallet to spindle center: 50–810 mm Distance pallet center to spindle nose: 135–895 mm Palette Pallet size: 500×500 mm B-axis indexing: 1° Max. load capacity: 500 kg Pallet changer: dual Spindle Spindle speed: 15,000 rpm Spindle power: 26 kW Max. torque: 199 Nm Tool holder: BT40 Tool magazine: 64 positions Max. tool diameter (adjacent tools fitted): 70 mm Max. tool diameter (no adjacent tools): 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Options 👉Transport organization and execution 👉Machine rigging and installation 👉Machine commissioning and production-ready handover

Condition: used, Horizontal machining center, 6 pallets Priced to sell - dismantled and loaded into truck Dwjdpot Ek Slsfx Adkjc OKUMA MA40 HA 6P OSP U100M CNC 6 pallets 400mm x 400mm max 400 kgs max workpiece dimensions 600*710 Spindle BT40 / coolant through the spindle 4th axis 1° Tool changer: 100 pos. 200 TOOLHOLDERS ARE AVAILABLE X = 560mm, Y = 610mm, Z = 560mm 40 m/min under power Mimu Machine Tools (Italy) X: 560 pallet: 6 Pallet size: 400*400

Condition: used, Year of construction: 1989, x-travel 650 mm Djdpfx Adsucgupekewc y-travel 410 mm z-travel 450 mm travel x vor 1000 mm control mc4va

Condition: repair required (used), Year of construction: 1999, functionality: limited functionality, machine/vehicle number: 0329, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, nominal power (apparent): 19 kVA, controller manufacturer: OKUMA, controller model: OSP700M, total height: 2,700 mm, total length: 3,000 mm, total width: 2,320 mm, spindle speed (max.): 7,000 rpm, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, OKUMA MX45 VAE Machining Center The machine is in good condition; however, a supply unit (electronic component) is currently defective. The machine can be inspected under power, but due to the defect, it does not operate (error present). Otherwise, the machine control is functional. The mechanical components are in perfect working order (e.g., spindle, ATC, etc.). Internal coolant supply (IKZ) is available. The machine was primarily used for machining aluminum parts. Spindle taper: MAS BT40 Original documentation for the machine is available. Dodpevyp Ncjfx Adkowc The machine is offered for sale without clamping devices, tools, or tool holders. --- Loading --- Loading is not free of charge. However, we will assist you in organizing professional transport from the current installation site to the collecting truck.

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand Okuma Model OSP-P200L Main Drive Dwodpjw Rhalefx Adksc Spindle speed range 4200 rpm Spindle motor power 22 kW Number of axis 3 Movement X-Axis Rapid Traverse 20 m/min Z-Axis Rapid Traverse 25 m/min Turret Number of turrets 2 Additional Equipment Renishaw tool probe USB, PCMCIA, and RS232 ports Chip conveyor (hinged belt type) Tool load monitoring and effort control Dual pedal for chuck and tailstock operation Fully equipped with static and live toolholders This 3-axis Okuma LU 300 MY was manufactured in 2006. It features a robust 22 kW spindle motor, dual turrets with live tooling, and a bar capacity of 75 mm. The machine offers a maximum turning diameter of 380 mm and a length of 1050 mm. It includes a programmable hydraulic tailstock, C-axis, Y-axis, and an OSP P200-L control for enhanced precision. If you are looking to get high-quality turning capabilities, consider the Okuma LU 300 MY machine we have for sale. Contact us for more information. Application Types Turning

Condition: like new (used), Year of construction: 2023, operating hours: 213 h, functionality: fully functional, OSP-P300SA control system with LCD screen Max. turning diameter 630 mm Max. turning length 900 mm X travel 580 mm (+480 / -20 mm) Y travel 160 mm (+80 / -80 mm) Z travel 935 mm Spindle end A2-8 Spindle bore D80 mm Main spindle speed 50 - 5000 rpm C axis 360° (0.001 degrees) B axis 225° (-30° / +195°; 0.001° increment) Power of driven tools (5 min/cont.) VAC 11/7.5 kW Milling spindle speed 50-6,000 rpm Milling spindle torque (5 min/cont.) 65.7 / 44.8 Nm HAS-A63 chuck Number of tools: 40 Motor: 15/11 kW Feed range: 0.001 – 1,000 mm/rev Rapid traverse (X) 40 m/min Rapid traverse (Z) 40 m/min Rapid traverse (Y) 26 m/min Tailstock travel: 1,000 mm Tailstock taper: MT5 Power requirement: Dimensions (L x W x H) = 4,035 x 2,257 x 2,587 mm Weight: 10,000 kg Features, accessories - Internal coolant supply: 20 bar - Kitagawa B-212A8 12" chuck - NC tailstock - B-axis indexing in 0.001 degrees - Coolant supply through the milling spindle - Dual foot pedal - Y-axis travel: 160 mm (+80 / -80 mm) - Hydraulic Device - Thermo-Friendly Concept - H1 TAS-S and TAS-C - CAS - Collision Avoidance System - *10 dB Coordinate Measurement (1 set) - Control Software: * Coordinate Transformation (1 set) * Profile Generation (1 set) * Coordinate Calculation (1 set) * Coordinate Change, Rotation, and Copy (1 set) * Realistic 3D Simulation (1 set) * Cycle Time Monitoring (1 set) * Load Monitoring (Main Spindle, Slide) (1 set) * Program Run Monitoring (1 set) * 2-Color Signal Lamps (1 set) Chip conveyor Coolant system Machine feet Documentation Dedpfx Ajwrr Nhsdkswc The machine is being sold due to company redundancy. It's in mint condition. It's only been in use for approximately 213 hours.

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08L/8001, Offer Number: M08L/8001 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off , PKO in 2nd and 3rd Make: ASAHI OKUMA Type: ORH120 Constr. year: 1988 diameter range: 14 mm number of dies: 2 number of stations (incl. cut off): 4 cutting length: 100 mm shaft length under head: 90 mm output - pieces/min: 100 Dodpjwi S Raofx Adkswc press power: 120 to Location: In our warehouse

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, controller model: P200M, Machine type: Horizontal Machining Center Manufacturer: OKUMA Model: MA-400HA Year of manufacture: 2008 Control: OSP – P200M Country of origin: Japan Delivery: short-term by arrangement Dwedpfx Adjw Hzxzskec 4-axis machining center! High productivity! Includes various accessories! Machine equipment: - ConSep chip conveyor system with high-pressure pump - Various software features - Touch setter with length measurement and breakage detection - Work area shower Short description: This machining center is in good overall condition. Its comprehensive base and additional equipment make this used machine highly versatile and characterized by high productivity. 4-axis machining enables efficient and flexible processing of workpieces. The integrated ConSep system with high-pressure pump ensures coolant filtration is directly integrated into the production process. The touch setter not only measures tool length but also monitors for breakage. Additional accessories such as a work area shower and software packages further enhance the production capabilities. This CNC machining center allows for cost-effective and efficient manufacturing. Technical specifications: - Axis travel: X-axis (column left-right): 560 mm Z-axis (table front-back): 625 mm Y-axis (spindle up-down): 610 mm - Number of pallets: 2 (2-pallet changer) - Pallet size: 400 x 400 mm - Max. pallet load: 400 kg - Max. workpiece dimensions on pallet: Ø500/600 x 710 mm - Spindle speed: 15,000 rpm - Main spindle (10min/cont.): 22/18.5 kW - Tool holder: BT40 - Tool magazine: 60 positions - Machine dimensions without accessories (LxW): approx. 4450 x 2410 mm - Total machine length (machine with ConSep unit): approx. 6600 mm - Machine height: approx. 2950 mm - Weight: approx. 11,500 kg Optional: - Transport arrangement and execution - Machine installation and setup - Machine commissioning

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 525 mm, workpiece weight (max.): 680 kg, number of slots in tool magazine: 20, TECHNICAL DETAILS Dedpfewtrbaox Adkowc Control: OSP-U100L Travel X: 1,020 mm Travel Y: 510 mm Travel Z: 525 mm Table Load capacity: 680 kg Clamping area: 1,200 mm x 510 mm Tool changer Magazine positions: 20 EQUIPMENT - Chip conveyor

Condition: used, Year of construction: 1986, operating hours: 10,839 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 1,000 kg, total height: 2,945 mm, total length: 4,013 mm, total width: 3,790 mm, table width: 510 mm, table length: 1,300 mm, table load: 1,000 kg, rotational speed (min.): 30 rpm, overall weight: 8,200 kg, spindle speed (min.): 4,000 rpm, number of slots in tool magazine: 20, tool length: 400 mm, tool diameter: 230 mm, tool weight: 15,000 g, Equipment: rotational speed infinitely variable, For sale production cell 2 OKUMA CNC milling machines with automatic tool changing. . Machines have full documentation. Machines were used for making spare parts for CNC machines. Highly rigid machines with spindles with mechanical gear ratio the machine itself selects the gear depending on the selected speed (4 gears). The larger MC-5VA machine has IGF dialog programming (full documentation) also has M-codes for the user - in our case they were used to work with indexed 4th and 5th axes. Machines operating used with a large number of tools Comes with a well-equipped Lista brand tool cabinet, a BT50 toolholder cart and a sturdy workbench with drawers. Includes 2 BIG-Kaiser mulliplicators. 4 BIG-Kaiser boring bars with cooling through the tool. Quite a few milling heads including large ones over fi 200. A large set of branded EPB toolholders. Spare bearings for the main spindle. Lots of spare parts. Dwjdpfx Asu Atn Sedkjc

Condition: ready for operation (used), Year of construction: 2004, Control Unit Brand OKUMA Model OSP-E100L Main Drive Number of axis 3 This 3-axis Okuma VTurn LVT300-M was manufactured in 2004. It features a vertical turning machine design, complete with a load and unload table. Ideal for those looking to get high-quality turning capabilities, consider the Okuma VTurn LVT300-M machine we have for sale. Contact us for more information. Application Types Turning Dwodpfxew Aikws Adkjc

Condition: ready for operation (used), Okuma DC-S1A DC Power Supply 4 Axes CZ-270C , serial no. according to photo ,used, normal signs of use, 100% functional Djdei Ecanspfx Adkowc

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08L/8356, Offer Number: M08L/8356 Machinetype: 4 die - 4 blow transfer header Info: bushing cut-off , PKO Make: ASAHI OKUMA Type: AF1513-4 Constr. year: 1988 Dodpfx Adowi S A Askswc diameter range: 7-15 mm number of dies: 4 number of stations (incl. cut off): 5 cutting length: 10-160 mm shaft length under head: 15-130 mm output - pieces/min: 130 press power: 150 to Location: In our warehouse

Year of construction: 1998, condition: ready for operation (used), Control Unit Brand Okuma Model OSP 7000L Turret Number of turrets 1 Tool taper VDI40 Dedpfx Adowx Szwekowc Media Chip conveyor Yes Additional Equipment Robot interface In-process measuring Bar feed HYDRO-SAMECA QS 7.52 with diameter reduction tubes: 53, 46, 40, 34, 27, 22, 17 mm SAMECA bar feeder QUICKSAM 7.52 complete with a basic unit Max. Capacity 52 mm, length 3100 mm, Total length 4900 mm Drum with guide tubes capacities: 16, 20, 26, 32, 38, 45, 52 mm Hydraulic unit Capacity 80 liters With tailstock This Okuma LB15II was manufactured in 1998. It features a 12-position VDI40 turret, chip conveyor, OKUMA OSP 7000L control, and a SAMECA bar feeder. Additionally, it includes a robot interface, in-process measuring, and a programmable workpiece chute. If you are looking to get high-quality turning capabilities, consider the Okuma LB15II machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: M08L/8327, Offer Number: M08L/8327 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off , PKO Make: ASAHI OKUMA Type: RH60 Constr. year: 1989 diameter range: 3-8,5 mm number of dies: 2 Dwjdpfx Aswi S Apjdkoc number of stations: 4 cutting length: 55 mm shaft length under head: 55 mm output - pieces/min: 200 press power: 30 to Location: In our warehouse

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand OKUMA Dwedpfewt Uvmox Adkoc Additional Equipment Spindle upgrade for 50000 RPM / Oil mist extraction unit Height: 2946 mm / Floor Space (W × D): 2160 mm × 2810 mm Weight: 7700 kg This 5-axis Okuma GENOS M460V-5AX was manufactured in 2018, featuring a robust vertical machining center design. It boasts a spindle speed of 15,000 RPM, a table size of Ø400 mm, and a maximum load capacity of 300 kg. The machine includes a high-capacity 32-tool automatic changer and advanced feed rates for precision. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08L/8328, Offer Number: M08L/8328 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off , PKO Make: ASAHI OKUMA Type: RH60 Constr. year: 1988 diameter range: 8,5 mm number of dies: 2 Dwsdpfx Aowi S Aisdkoc number of stations: 4 cutting length: 55 mm shaft length under head: 55 mm output - pieces/min: 200 press power: 30 to Location: In our warehouse

Condition: ready for operation (used), Year of construction: 2023, General Data Measurements width 2257 Measurements depth 4035 Measurements height 2538 Machine weight 10000 Control Unit Brand OKUMA Model OKUMA OSP-P300SA Movement X-Axis Movement 580 mm (+480/-20 mm) Y-Axis Movement 160 mm (+80/-80 mm) Z-Axis Movement 935 mm B-Axis Movement 225° (-30°/+195°; 0.001° increments)225° (-30°/+195°; 0.001° increments) C-Axis Movement 360° (0.001° increments) Tools Slots in storage 40 Media Chip conveyor Yes Dwjdpfx Adewmg U Iekjc Additional Equipment Thermal Stability Concept (TAS-S & TAS-C) Full enclosure and LED workspace lighting Hydraulic power unit for basic machine operations 3D Simulation and collision avoidance (CAS) This 5-axis Okuma Multus B300 II turn-mill centre was manufactured in 2023, featuring a max turning diameter of 630 mm and a machining length of 900 mm. It includes a collision avoidance system, thermal stability, and an easy-to-use OSP-P300SA controller with a 15” touch screen. If you are looking to get high-quality turning and milling capabilities, consider the Okuma Multus B300 II machine we have for sale. Contact us for more information about this machine. Application Types Turning

Year of construction: 2018, condition: ready for operation (used), Additional Equipment Spindle Speed (Motorized Tool Spindle): 5000 rpm This Okuma Genos L 300E-MY-e was manufactured in 2018. A robust horizontal turning machine located in Italy, it features a 450 mm maximum swing and a workable length of 1020 mm. The spindle supports a speed of 3000 RPM with a bar capacity of 65 mm. Equipped with a 12-position turret and motorized tool spindle capable of 5000 RPM. Contact us for more information about this machine. Dwedewttuhjpfx Adkjc Application Types Turning