Used Okuma Lc 20 for sale (176)

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,771 h, spindle speed (max.): 3,800 rpm, travel distance Y-axis: 160 mm, controller manufacturer: OKUMA, controller model: OSP-P300SA, number of slots in tool magazine: 40, number of axes: 4, This 4-axis Okuma Multus B300 II Turn Mill Centre was manufactured in 2022. It features a control unit OKUMA OSP-P300SA, a main spindle with a three-jaw chuck diameter of 304mm, and a counter spindle with a C-axis. The milling spindle supports up to 6000 rpm with a torque of 65.7 Nm. If you are looking to get high-quality milling and turning capabilities, consider the Okuma Multus B300 II machine we have for sale. Contact us for more information. Additional equipment • HI-Cut Pro high-speed control Machine Benefits Qualitative Machine Benefits • Enlarged main spindle • Counter spindle with c-axis on w-axis: rapid traverse: 20m/min max: 5000 1/min torque: 328nm spindle nose: kk size 6 spindle bore diameter: 62mm hollow clamping cylinder and three-jaw chuck diameter: 254mm bore in drawtube: 52mm diameter Technical Machine Benefits • 8 short tapers • Front bearing diameter: 120mm • Boring diameter: 80mm • Torque: 412 nm • Helical interpolation Dedpfx Ajx D Hllefpocc • 10 workpiece zero points • Tool spindle and c-axis: 0. 001° for main spindle • Ikz: 20 bar • Hsk a 63 • Electr. Spindle orientation: +/- 0. 1° Extra Information New spindle in August 2024 Technical Specification Taper Size HSK 63

Year of construction: 2013, condition: ready for operation (used), This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Application Types Milling Dcsdox D S Ekepfx Afpoc

Condition: ready for operation (used), Year of construction: 2006, operating hours: 3,857 h, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP P200M, spindle speed (max.): 15,000 rpm, spindle motor power: 22,000 W, number of axes: 5, This 5-axis Okuma MU-400V was manufactured in 2006. It features a spindle drive of 15,000 rpm, a 32-position tool changer, and an internal coolant supply at 15 bar. The machine includes a dual screw chip conveyor, tool breakage monitoring, and an Okuma OSP P200M control system. Ideal for complex machining tasks with its robust 5-axis capability and high-speed operations. Contact us for more information about this machine. Dcodpfx Asydcdfjfpjc Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2005, operating hours: 33,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Okuma, controller model: OSP E100M, rotational speed (min.): 10 rpm, rotational speed (max.): 15,000 rpm, spindle speed (min.): 10 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 70 bar, number of spindles: 1, number of slots in tool magazine: 60, Okuma MB 500H horizontal machining center with 2-station pallet changer Year of manufacture: 2005 Control system: Okuma OSP E100M Technical specifications: Spindle speed: 10 - 15,000 rpm Drive power: 26 kW Tool holder: BT 40 Number of magazine positions: 60 Internal coolant supply: 70 bar Travel paths: X-axis: 800 mm Y-axis: 800 mm Z-axis: 800 mm 4th axis: Index 1° Number of pallets: 2 Pallet size: 500 x 500 mm Accessories: - Mayfran ConSep 2000 coolant system - Mayfran ConSep chip conveyor - Tool breakage monitoring in the magazine - Workpiece coolant shower Djdpfxswf E D Eo Afpecc

Condition: used, Year of construction: 2004, travel distance X-axis: 1,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Okuma, controller model: OSP-E100M, total height: 3,280 mm, total length: 6,500 mm, total width: 3,460 mm, table width: 630 mm, table height: 630 mm, spindle speed (min.): 12,000 rpm, power: 37 kW (50.31 HP), Okuma MA-600 HB Space Center OSP E 100M control Dimensions pallet 630 x 630 mm Number of pallets 2x X-axis travel 1000 mm Y-axis travel: 950 mm Z-axis travel 1000 mm Indexing of table 1° Spindle holder MAS BT 50 Djdpfx Asydd Hbjfpocc Spindle speed 12,000 rpm Spindle motor 37/26 kW Positions in the tool magazine 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 127690, turning length: 150 mm, turning diameter: 220 mm, Equipment: documentation/manual, rotational speed infinitely variable, Machine regularly serviced, in excellent condition. If interested, we have two more identical machines available. Dodpfxexr Tzco Afpecc

Condition: good (used), Parts shown by hand not come. Dedpfxeyb R Ers Afpscc

Condition: good (used), center height: 215 mm, grinding length: 1,500 mm, total width: 2,300 mm, total length: 5,530 mm, total height: 2,100 mm, grinding diameter: 430 mm, Matrix Okuma Universal Cylindrical Grinder Model: GU – 40 Max Dia Ground: 430mm Dcedpfxeyglhfs Afpoc Max Between Centres: 1500mm Wheel Size: 355 x 50 x 127mm Headstock Speed: 10-150 RPM Variable Table Swivels: 8 Degree Machine With: Coolant Filtration Tank Steadies Internal Grinding Attachment with Quill Dimensions: 5530 x 2300 x 2100mm High Weight: 6200 Kgs

Condition: ready for operation (used), Year of construction: 2018, This Okuma Genos L 300E-MY-e was manufactured in 2018. A robust horizontal turning machine located in Italy, it features a 450 mm maximum swing and a workable length of 1020 mm. The spindle supports a speed of 3000 RPM with a bar capacity of 65 mm. Equipped with a 12-position turret and motorized tool spindle capable of 5000 RPM. Contact us for more information about this machine. Additional equipment • Spindle Speed (Motorized Tool Spindle): 5000 rpm Machine Benefits Technical Machine Benefits • Maximum swing: 450 mm / workable diameter: 340 mm / maximum workable length: 1020 mm / bar capacity: 65 mm Dcedpfx Afsyalp Nspoc • Turret type: 12 ut vdi / number of tools: 12 • Spindle speed (main spindle): 3000 rpm / spindle nose: asa 8 / spindle bore: 65 mm

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: OKUMA, controller model: OSP - P300L, number of axes: 4, This 4-axis Okuma LB 3000 EX MYT was manufactured in 2008, offering advanced capabilities for horizontal turning. Ideal for complex machining tasks, this machine ensures precision and efficiency. Consider the opportunity to buy this Okuma LB 3000 EX MYT horizontal turning machine. Contact us for more information. Additional equipment • Bar Loader: Iemca Master mod. 880 33 P/R • Automatic Presetting: Yes • Gear Machining Software and Tools: Yes • Accessories: Chip Evacuator Machine Benefits Technical Machine Benefits • Max. Workable diameter: Ø 400 mm • Max. Workable length: 500 mm • Type: cnc lathe • Condition: used Dcsdpfx Aeyalp Aefpoc • State: optimal Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 4,200 rpm, spindle motor power: 22,000 W, overall weight: 6,200 kg, controller manufacturer: OKUMA, controller model: OSP P200-L, number of axes: 2, This 4-axis Okuma LB 3000 MY was manufactured in 2008. It features a 12-position turret with all driven tools, C-axis and Y-axis functionality, and a main spindle motor of 22 kW. The machine includes a hydraulic and programmable tailstock, a chuck size of 250 mm, and a bar capacity of 75 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 MY machine we have for sale. Contact us for more information. Additional equipment • Spindle oil chiller included • Side chip conveyor (hinged belt type) • Double foot pedal for chuck and tailstock control • Includes transformer, manuals, parts list, and schematics Machine Benefits Technical Machine Benefits • Torque: 620 nm • Spindle nose: a2-8 • Bar capacity: 75 mm • Chuck: 250 mm smw autoblok with quick jaw change • Swing diameter: 520 mm • Max turning diameter: 380 mm Dcodpjyaiq Defx Afpoc • Max turning length: 1050 mm • 12-position turret, all driven tools • Turret indexing time: 0. 2 seconds • Equipped with static and driven tool holders Extra Information Tools Automatic tool load monitoring Renishaw automatic tool measurement arm Driven tools motor: 5.5 kW Driven tool speed: up to 4000 rpm Currently in operation

Condition: good (used), Year of construction: 1992, operating hours: 30,000 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Okuma OSP5020M, total height: 2,700 mm, total length: 2,500 mm, total width: 2,500 mm, rotational speed (max.): 8,000 rpm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 10,000 h, coolant supply: 5 bar, number of slots in tool magazine: 18, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, CNC Milling Machine Okuma VR40 Year of manufacture: approx. 1992 3 axes, X = 560 mm, Y = 450 mm, Z = 450 mm travel. Spindle speed: 8,000 rpm, SK40 Spindle hours: approx. 10,000 h Djdpfx Asyha R Rjfpscc Coolant pump with approx. 5 bar coolant pressure Coolant with six nozzles around the spindle Tool magazine with 18 stations Various tool holders with assorted tools The machine originally operated in a sheltered workshop and has also only been used occasionally by us. It is in very good condition, and both the axes and the spindle run quietly and smoothly. Accuracy is very good. The machine is available for inspection and demonstration under power at our facility. It is sold with three machine vises and all accessories shown in the photos. Complete documentation is available. Two tool stations are defective as the plastic grippers are broken. They can be replaced with new grippers. Normally, the machine has 20 tool stations. This has never been an issue for us over the years.

Condition: good (used), Year of construction: 1996, Control: OSP 700M Travel X/Y/Z: 1050 x 560 x 450 mm Table size: 1300 x 560 mm Spindle speed: 6,000 rpm Tool magazine for 20 tools, BT 50 Dcsdpfx Afjx Tvgajpsc Chip conveyor Approx. 40 toolholders BT 50

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, controller manufacturer: OKUMA, spindle speed (max.): 8,000 rpm, number of axes: 4, This 4-axis Okuma MA-400HA horizontal machining center was manufactured in 2008. It offers robust construction and precision for demanding machining tasks. If you are looking to get high-quality milling capabilities, consider the Okuma MA-400HA machine we have for sale. Contact us for more information. Dcsdpjx U Trvefx Afpoc Additional equipment • Tool change gearbox has a defect Machine Benefits Technical Machine Benefits • Pallet size: 400x400 mm / 2 pallets • B-axis rotary table

Condition: ready for operation (used), functionality: fully functional, MACHINE IN STOCK – READY FOR IMMEDIATE DELIVERY Djdpfx Afeygx Skepscc

Condition: used, _____ Description: Year of manuf. : 2022 Control : Okuma OSP-P300 SA Turning diam. : 650 mm Turning length : 1000 mm Main spindle: Technology:Motor spindle Speed:4,200 rpm Power:22 kW Torque:427 Nm spindle bore:91 mm Hollow clamping cylinder:86 mm C-axis:High precision package Chuck:SMW KNCS-N 275-86 K8 Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:22 kW Torque:420 Nm spindle bore:80 mm Hollow clamping cylinder:77 mm C-axis:High precision package Chuck:SMW BHD-FC 210-52-3 Tool carrier X/Y/Z/B: Technology:Milling spindle Speed:12.000 rpm Dcedowu I Irspfx Afpoc Power:22 kW Torque:120 Nm Tool holder:HSK 63 Y-axis:250 mm (+/- 125 mm) B-axis:240° Tool magazin: Number of stations:80 Equipment: Measuring systems:Direct in X/Y/Z axis (glass scales) Chip disposal:Chip conveyor Coolant supply:IKZ system, 70 bar Coolant temperature control:Deltatherm E4 Chip rinsing:working area, manual gun Accuracy package:C-axis high accuracy Software package:5-axis auto-tuning Software option:Multifunction tool Gear cutting software package:Gear hobbing, gear peeling Control extension:Dialogue programming Workpiece measurement:Renishaw measuring probe Tool measurement:Tool setter Tool breakage monitoring:Renishaw TRS2 B-axis:NC function and turning function Bar loader:LNS Quickload Servo III+ Automation preparation:Robot interface Work area door:Automatic Set-up mode:Electronic handwheel

Condition: ready for operation (used), Year of construction: 2003, operating hours: 10,000 h, This 3-axis Okuma LB300-10000 MC was manufactured in 2003. It features a turning diameter of 340 mm, turning length of 1,000 mm, and 12 tool positions. Includes a chip conveyor and has been used in single-shift operations. Consider the opportunity to buy this Okuma LB300-10000 MC horizontal turning machine. Contact us for more information. Dsdpfjx Ut H Hex Afpscc • 12 tool positions • Chip conveyor • Single-shift operation • Without tools, fixtures, or clamping devices.

Condition: used, Year of construction: 2002, operating hours: 10,500 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: Okuma, controller model: U100, spindle speed (max.): 8,000 rpm, coolant supply: 12 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MB46 from 2002 Low operating hours! Machine can be inspected under power. 32 tools BT40 Scraper belt conveyor Internal cooling 8 bar 8,000 rpm Dcodpfx Afewt Dqaepoc 4th axis included

Condition: used, Year of construction: 1989, x-travel 650 mm y-travel 410 mm Djdpsx U A Rnefx Afpscc z-travel 450 mm travel x vor 1000 mm control mc4va

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 16 m/min, rapid traverse Z-axis: 16 m/min, controller model: OKUMA-OSP-HMI, table width: 850 mm, table length: 2,200 mm, table load: 2,500 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 15 bar, distance table center to spindle nose: 950 mm, spindle motor power: 22 W, spindle nose: BT 50, number of spindles: 36, number of slots in tool magazine: 36, tool length: 400 mm, tool diameter: 120 mm, tool weight: 20 g, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA-OSP-HMI 3-Axis Vertical Machining Center with CNC Dsdpju Dinksfx Afpscc

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 6,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 650 mm, table length: 6,300 mm, table width: 2,500 mm, spindle speed (min.): 30 rpm, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 3,500 m/min, rapid traverse Z-axis: 10,000 m/min, distance between stands: 3,050 mm, table load: 30,000 kg, overall weight: 59,000 kg, spindle nose: NT No.50, feed length W-axis: 1,300 mm, Okuma MCR-A5C gantry machining center (2013) with BT50 spindle, 6,500 mm X-travel and 30 t table load. Machine has approx. 5,700 cutting hours and 6,900 spindle hours, suitable for heavy and precise machining of large workpieces. Dsdpfx Aox Tzyxjfpscc

Condition: good (used), Year of construction: 2002, turning length: 200 mm, turning diameter: 300 mm, spindle bore: 40 mm, spindle speed (max.): 4,000 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, The Okuma LVT300M CNC lathe shown in the picture is for sale. The machine is currently in production! Driven tool, C-axis machine. It can be viewed in operation. Main parameters: -Control: OSP100 -Hydraulic chuck -Hydraulic saddle Djdpfox Uzyuex Afpscc -Maximum swing: 300 mm -Maximum length: 200 mm -Spindle diameter: 40 mm -Turret: 12 positions

Condition: used, Year of construction: 2017, operating hours: 33,500 h, functionality: fully functional, machine/vehicle number: W6212-T63-280, We have a CNC lathe for sale, brand Okuma-Genos, which is ready for operation. The machine is fully functional and has been regularly maintained and serviced. - Y-axis - Main and sub spindle - Tool probe - Parts catcher Spindle speed: 3800 rpm Spindle operating hours: 20,503 h A detailed description of the machine is included in the attachment. Technical condition: Good. The machine has been in our facility since new, purchased in 2017 and commissioned in the first quarter of 2018. The lathe is connected to power and currently in operation. Viewing and functional inspection possible under power in our workshop. Dodpfx Afew Np Uhopjcc Reason for sale: ongoing changes in our projects. Optionally, an LNS bar feeder may be purchased for €7,000 and an oil mist separator for €1,500 (both visible in the pictures).

Condition: used, Year of construction: 2017, operating hours: 34,000 h, functionality: fully functional, machine/vehicle number: W6212-T63-280, We have an Okuma Genos CNC lathe for sale, fully operational and immediately ready for work. The machine is in excellent working order, regularly maintained and serviced. - Main spindle and sub-spindle - Tool probe - Parts catcher Spindle speed: 3,800 rpm Dedpfxjw Np S Ho Afpecc Technical condition: Good. The machine was purchased new for our facility in 2017 and commissioned in the first quarter of 2018. The lathe is connected to power and currently in operation. It is possible to inspect and test the machine under working conditions at our site. The decision to sell is due to changes in our projects. Optionally, an LNS bar feeder is available for €10,000 and an oil mist separator for €1,500 (both visible in the photos).

Condition: good (used), Year of construction: 2004, Opportunity to buy a 5 axis OKUMA machining center with EROWA automation. Including: EROWA Robot Easy automatic loading cell Chip conveyor Heavier coolant pump Higher Spindle speed Automatic measurement system for tool length, diameter setting, and tool breakage detection with a Renishaw laser Automatic measurement function, Renishaw MP10, BT40 Full technical specifications in the attached document. This machine is in very good condition and can be inspected under power upon appointment. Availability: 03/2026 CNC control Okuma OSP-E100M X-axis 762 mm Y axis 460mm Z axis 460mm C axis 360° Table size 400 mm Table load 300 kg Spindle mounting BT40 Big plus spindle Tool changer capacity 32 positions Spindle speed 50-15,000 rpm Spindle hours approx 42000h Cutting hours approx. 38000h Dcsdpoyfht Usfx Afpsc Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.