Used Okuma Lr 15 for sale (203)

Condition: ready for operation (used), Okuma DC power supply for 6 axes, PCB with part number E4809-436-002-A, used, shows normal signs of wear, 100% functional. Hsdpfx Asi Ecakjnyot

Condition: ready for operation (used), Okuma 1006 inverter BLII-D50A Vers.1.2 consisting of board E4809-820-006-A + board E4809-770-069-A, used, normal signs of use, 100% functional, scope of delivery as per photos Hjdpst Izafjfx Anyst

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit, Model 1A, E04809-045-019D, serial number as shown in the photo, used, with normal signs of wear, 100% functional. Hjdpfsi Eca Isx Anyet

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit, Model 1A, E04809-045-071, serial number as shown in the photo, used, with normal signs of wear, 100% functional. Hsdsi Eca Sepfx Anyjt

Condition: used, Year of construction: 1980, Machining center Hedpjyycv Iofx Anyjt

Condition: used, Technical details: turning diameter over bed: 460 mm Hodpfx Aswa Nwfjnyjt turning diameter over support: 350 mm turning length: 1500 mm centre height: 250 mm spindle bore of work spindle: 52 mm range of revolution per miute: 35 -1800 U/min tailstock quill adjustment:: 230 mm tailstock taper MT: MK4 weight of the machine ca.: 2,7 t dimension machine xH: 2,88 x 1,2 x 1,5 m Coolant pump with feed to manual valve Accessories: Steady rest D=130mm closed 3 Jaw chuck D=315mm from Forkhardt F315 *

Condition: used, Year of construction: 2003, operating hours: 23,000 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,000 mm, controller model: OSP-E100M, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time by the end of week 26 of 2026! TECHNICAL DETAILS Travel in X-axis: 1,000 mm Travel in Y-axis: 950 mm Travel in Z-axis: 1,000 mm Main spindle speed: 12,000 rpm Table width: 630 mm Table height: 630 mm NCB B-axis: 0.001 degrees MACHINE DETAILS Control system: OSP-E100M Dimensions (L x W x H): 6,500 x 3,460 x 3,280 mm Operating hours: approx. 23,000 h EQUIPMENT Hjdpfx Anszbamfeyst 2 APC pallet changing systems 100 ATC tool changer SK50 with tool ID Coolant system Mayfran Consept Renishaw preparation (receiver) Tool breakage monitoring installed in the magazine (special development) An optional tool package with 230 tools is available for the machine for €5,000. The seller can offer dismantling, transport securing, removal and loading for an additional charge of €7,850.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 710 mm, turning diameter: 710 mm, spindle motor power: 11,000 W, spindle speed (min.): 38 rpm, spindle speed (max.): 3,800 rpm, travel distance X-axis: 690 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,545 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, spindle nose: JIS A2-8, overall weight: 14,000 kg, tool length: 300 mm, tool weight: 10 g, travel distance W-axis: 1,550 mm, Equipment: documentation/manual, Turn mill center OKUMA Multus B400 TECHNICAL CHARACTERISTICS: CNC control: OSP-P200L Distance between centers: 1500 [mm] Max. cutting diameter: 710 [mm] Height of centers over cariage: 710 [mm] Stroke X axis: 690 [mm] Stroke Y axis: -115 / +115 [mm] Stroke Z axis: 1545 [mm] Stroke W axis: 1550 [mm] B axis indexing precision: 0.001 [°] Milling head max. speed: 6000 [rpm] Max. milling spindle power: 11 [kW] Max. milling spindle torque: 65.7 [Nm] Coolant milling head: HSK-A63 Tool magazine capacity: 40 Max. tool length: 300 [mm] Max. tool diameter: 130 [mm] Max. weight of single tool: 10 [Kg] Rapid traverse rate X axis: 4000 [mm/min] Rapid traverse rate Z axis: 40000 [mm/min] Rapid traverse rate Y axis: 26000 [mm/min] Rapid traverse rate W axis: 12000 [mm/min] Spindle nose: JIS A2-8 Min. spindle speed: 38 [rpm] Max. spindle speed: 3800 [rpm] Increment C-axis: 0.001 [°] Supply voltage: 400 [V] Weight: 14000 [Kg] INCLUDED EQUIPMENT: 1 × One-Touch IGF software option 1 × ATLING 2-point steady rest, type AX8I-NAOS (Ø85–360 mm) 1 × SMW AUTOBLOK 3-jaw chuck Ø340 mm, type KNCS-N-340-117 1 × Chuck clamping pressure regulator 1 × Parts catcher 1 × NC tailstock 1 × MARPOSS T18 tool probe Hjdoyqx Rzjpfx Anyst 1 × Remote electronic handwheel 40 × HSK-63 tool holders 1 × 2-color status signal lamp 1 × Chip conveyor 1 × Coolant tank 1 × Transformer 1 × Complete set of manuals + OKUMA CD Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to brands such as Mazak, DMG Mori, Index Traub, Doosan, Hermle, Chiron, and Biglia. Also includes lathes, mill-turn machines, and milling machines.

Condition: good (used), Year of construction: 1999, functionality: fully functional, turning diameter: 340 mm, spindle speed (max.): 3,800 rpm, spindle speed (min.): 38 rpm, total height: 1,745 mm, total length: 2,200 mm, total width: 1,720 mm, overall weight: 4,300 kg, Okuma SpaceTurn LB300-M CNC Okuma OSP U100L Controller Max. turning diameter 340 mm Max. turning length 480 mm Distance between centers 500 mm X-axis travel 280 mm Z-axis travel 500 mm C-axis 360° (0.001 increment) Rapid traverse X-axis 20,000 mm/min Rapid traverse Z-axis 25,000 mm/min Incremental feed rates for X and Z axes from 0.001 to 1.000 mm Spindle mounting A2-8 Speed 38-3800 rpm Power 22 Kw Powered tools Speed 45-4500 rpm Power 3.3 Kw Turret Type VDI 40, 12 Stations Square tool section 25 mm Bore section 40 mm Tailstock Bore diameter 90 mm Bore travel 120 mm Tailstock mounting MT5 Hodpfozh Hu Ujx Anyet Chip conveyor Kitagawa B210 chuck

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, Vertical Milling Machine Condition: very good, operational Ready for immediate delivery Hsdpfxszh Hi Se Anyot Machinery runs without any problems. The machine is operational, fully functional, in excellent condition.

Condition: excellent (used), Year of construction: 2011, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 625 mm, torque: 163 Nm, coolant supply: 20 bar, nominal power (apparent): 30 kVA, number of spindles: 48, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rotary table diameter: 400 mm, rotational speed (max.): 15,000 rpm, table load: 400 kg, tool diameter: 70 mm, tool length: 300 mm, tool weight: 10 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Technical characteristics: CNC OSP P 200 Chip conveyor 48 tools Continuous table 360,000 pos. 15,000 rpm BT 40 Cooling through spindle 20 Bar Presetting on board table Shower work area washing system P.S. Hodsuw Sq Ujpfx Anyet The machine has always worked in full oil Teflon material

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, total height: 3,000 mm, total width: 3,270 mm, table load: 400 kg, overall weight: 8,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 32, tool weight: 8,000 g, product length (max.): 300 mm, number of axes: 3, This 3-axis Okuma ACE CENTER MF-46VA was manufactured in 2006. It features an X-axis travel of 762 mm, Y-axis travel of 460 mm, and Z-axis travel of 460 mm. The machine is equipped with a maximum spindle speed of 15,000 rpm and an automatic tool changer with 32 stations. If you are looking to get high-quality machining capabilities, consider the Okuma ACE CENTER MF-46VA vertical machining centre we have for sale. Contact us for further details. • Distance table to spindle nose: 180–640 mm • Rapid traverse (X/Y): 40 m/min • Rapid traverse (Z): 32 m/min • Maximum cutting feed: 32,000 mm/min • Positioning accuracy (X/Y/Z): ±0.004 mm (JIS) • Repeatability (X/Y/Z): ±0.0015 mm (JIS) • Pallet changer: 2 pallets, rotary automatic pallet changer • Pallet size: 760 × 460 mm • Pallet T-slots: 3 × 18 mm, 125 mm pitch • Pallet change time: 6.0 s • Spindle speed: 15,000 rpm (upgrade from 8,000 rpm) Hodpfx Aey Uxuijnyjt • Spindle motor power: 22 / 18.5 kW • Max spindle torque: 199 Nm • Thermal compensation: TAS-S (spindle) and TAS-C (structure) • ATC capacity: 32 tools (upgrade from 20), random management • Tool change time (adjacent): 1.2 s • Max tool diameter: 90 mm (125 mm with adjacent pockets empty) • Max tool length: 300 mm • CNC functions: Hi-2 NC with NURBS, Super Hi 2 NC profile management, synchronized rigid tapping, helical cutting, spindle cutting load monitor, IGF conversational programming, RS-232-C interface, 3.5" floppy drive • 4th axis capability: prepared for 4th axis integration • Documentation: operator manuals and CE declaration of conformity included Additional equipment • Tool breakage detection sensor (table-side mounted) • Prepared for Renishaw zero-offset part probe (probe not included) • “Shower” type work area coolant wash system • Belt-type oil skimmer on coolant tank Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2005, functionality: fully functional, Max turning diam 530mm, max turning length 1,025mm Main spindle A2-8, 38-3,800Rpm, bore 80mm, 22 Kw. Chuck 210mm. Sub spindle A2-6, 5,000Rpm, bore 62mm, 22 Kw. Chuck 200mm. X 475mm, Z 1,170mm, Y 160mm, B axis Capto C6, 200-6,000Rpm, cooling through spindle 30 bar. Index 1 dg. Lower turret 12 pos VDI 40. ATC 44 pos. SMW SLU2 hydraulic steady 12-110mm diam. Thermal heat compensation, type TAS-C. 45° B axis indexing for multitools. Hedpfx Anozghc Doyet Helical machining. Tool wear offset function. Tool reteact function. Tool-Offset 200 pos. Control OSP-E100M. Absoscales XA / XB. Portal loader Fastem / Fanuc.

Condition: good (used), Year of construction: 1990, 2. Turret disks with tool holders. For CNC lathe OKUMA&HOWA 2SP Hedpjxr Diwefx Anyot

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, turning length: 250 mm, turning diameter: 150 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 60 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 285 mm, spindle motor power: 7,500 W, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 25 m/min, rotational speed (min.): 60 rpm, rotational speed (max.): 6,000 rpm, swing diameter over cross slide: 150 mm, turning diameter over bed slide: 250 mm, type of input current: three-phase, bar passage: 45 mm, chuck outer diameter: 203 mm, spindle nose: A2-5, Equipment: documentation/manual, Weight: approx. 4,000 kg Dimensions: approx. 2000 × 1700 × 2000 mm Hjdpfoy T Hakox Anyot

Condition: used, turning diameter over bed 460 mm turning dia. over face-slide 256 mm turning length 1250 mm centre distance 1250 mm centre height 230 mm spindle bore 55 mm spindle turning speed range 35 - 1800 U/min weight of the machine ca. 2,7 t dimensions of machine L x W x H 2,75 x 1,20 x 1,42 m Hsdpfxexwp Ebe Anyst Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady

Condition: ready for operation (used), Year of construction: 2008, operating hours: 18,349 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 340 mm, spindle speed (max.): 4,800 rpm, controller model: OSP P200L, Equipment: chip conveyor, TECHNICAL DETAILS Turning length: 1,000 mm Turning diameter: 340 mm Spindle speed (max.): 4,800 rpm Hsdpfx Asy Txycjnyst Axes: 4 Tool turret A: VDI40 V12 with driven tools Tool turret B: VDI40 V8 MACHINE DETAILS Control system: OSP P200L Operating hours: 18,349 h EQUIPMENT Touch probe Chip conveyor Coolant station Standard spindle bore Tailstock: manual

Condition: ready for operation (used), Year of construction: 2001, operating hours: 18,500 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, controller model: CNC OSP 100M, rotational speed (max.): 5,000 rpm, An optional tool package worth €10,000 can be purchased for €3,500! TECHNICAL DETAILS Travel range, X-axis: 700 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 700 mm Rotary table/B-axis: indexed in 1° steps, 360 positions Spindle speed: 25 - 5,000 rpm Type of input current: Three-phase Pallet size (2x): 500 mm x 500 mm Table size: 500 mm x 500 mm Table load: 800 kg Distance spindle nose to table surface: 150 mm - 850 mm Tool holder: MAS BT 50 Tool magazine (ATC): 60 positions, chain magazine Tool length max.: 450 mm MACHINE DETAILS Hedpfsy S S U Dex Anyet Control: CNC OSP 100M Dimensions & Weight Dimensions (L x W x H): 5,500 mm x 3,160 mm x 3,300 mm Machine weight: 21,000 kg Spindle hours: 18,500 h EQUIPMENT Chip conveyor Coolant system Pocket filter system for internal cooling Spindle speed, continuously adjustable

Condition: ready for operation (used), Year of construction: 2002, operating hours: 9,675 h, functionality: fully functional, controller model: U100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, number of axes: 3, An optional tool package worth €10,000 can be purchased for €3,500! TECHNICAL DETAILS X-axis travel: 1,050 mm Y-axis travel: 560 mm Z-axis travel: 460 mm Main spindle: 12,000 rpm MACHINE DETAILS Control system: U100M Axes: 3 Tool changer (ATC): 32 SK40 Cutting time: 9,675 h Hodpfxsy S S Nno Anyst EQUIPMENT Documentation/Manual Speed infinitely adjustable Chip conveyor Coolant system Preparation for A-axis (4th axis)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning length: 1,000 mm, turning diameter: 350 mm, spindle bore: 62 mm, spindle speed (max.): 5,200 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Swinging diameter over cross slide: 370 mm Turning length: 1,000 mm Swinging diameter: 350 mm Spindle bore: 62 mm Spindle speed (max.): 5,200 rpm MACHINE DETAILS Coolant pump: 8 bar EQUIPMENT Documentation/Manual Speed infinitely adjustable A-turret VDI40, 12 stations (all powered) B-turret VDI40, 8 stations Touch setter for A & B turrets Tailstock, manual Hodpfjy S S Anjx Anyot Chip conveyor Extraction system Bar feeder, Samsys Multi-3000

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, spindle speed (max.): 3,200 rpm, overall weight: 6,500 kg, controller model: U-10L, TECHNICAL DETAILS Maximum turning diameter: 210 mm Maximum turning length: 500 mm X-axis travel: 155 mm Z-axis travel: 520 mm Spindle speed: 3,200 rpm Hjdpfey S Sytjx Anyst MACHINE DETAILS Control system: U-10L Dimensions & Weight Dimensions (L x W x H): 2,700 x 1,900 x 1,700 mm Total weight: 6,500 kg EQUIPMENT Documentation/Manual Adjustable spindle speed Parts catcher Touch probe V12 turret VDI 30 (all powered) Manual tailstock Chip conveyor Coolant pump Bar loader Samsys MUS-3000, year 2007 SMW chuck KNCS-N210-52

Condition: ready for operation (used), Year of construction: 1999, operating hours: 12,500 h, functionality: fully functional, controller model: OSP 7000M, Equipment: chip conveyor, TECHNICAL DETAILS Tool changer: 24 BT40 MACHINE DETAILS Control system: OSP 7000M HS: Big Bore GS: Standard Bore Coolant pump: 8 bar Spindle hours: 12,500 h Hodpfjy S Sw Eox Anyot EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,500 h, functionality: fully functional, turning diameter: 630 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 935 mm, controller model: Okuma OSP P200L, TECHNICAL DETAILS Swinging diameter over slide: 630 mm Machining diameter: 630 mm Distance between centers: 900 mm Travel of X-axis: 580 mm Travel of Y-axis: 160 mm Travel of Z-axis: 935 mm Travel of W-axis: 1,000 mm Travel of C-axis: 360° Travel of B-axis: -30° to 195° Main spindle: 3,800 rpm Counter spindle: 5,000 rpm Milling spindle: 6,000 rpm Rapid traverse rate X-axis: 40,000 mm/min Rapid traverse rate Z-axis: 40,000 mm/min Rapid traverse rate Y-axis: 26,000 mm/min Rapid traverse rate W-axis: 20,000 mm/min Rapid traverse rate C-axis: 200 rpm Rapid traverse rate B-axis: 30 rpm Tool diameter max.: 90 mm Tool diameter without adjacent tools max.: 130 mm Hedjy S Swxjpfx Anyot Tool length max.: 300 mm Tool weight max.: 10 kg MACHINE DETAILS Number of axes: 6 Control system: Okuma OSP P200L Dimensions & Weight Footprint: 4,340 × 2,050 mm Height: 2,600 mm Weight: 10,300 kg Spindle hours: 10,500 h EQUIPMENT Documentation/Manual Spindle speed infinitely adjustable Marpos tool sensor Chip conveyor & coolant system with small band filter system ATC 60 system HSKA-63 (60 tools)

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 220 mm, travel distance Z-axis: 620 mm, spindle speed (max.): 4,000 rpm, overall weight: 5,500 kg, controller manufacturer: OKUMA, controller model: OSP-P200L, number of axes: 2, Vertical turning machine manufactured in 2004. This Okuma LVT300 features a maximum turning diameter of 280 mm and a turning length of 150 mm. It offers X-axis travel of 220 mm and Z-axis travel of 620 mm, with a spindle speed range of 40 to 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LVT300 machine we have for sale. Contact us for further details regarding this machine. Hsdpfxjy Snpdo Anyot • Max. turning diameter: 280 mm • Max. turning length: 150 mm • X-axis rapid traverse: 60 m/min • Z-axis rapid traverse: 30 m/min • Spindle nose: JIS A2-8 • Turret capacity: 12 stations (V12) • Turret type: Bolt-on (VDI-40) • Input voltage: 400 V • Phases: 3 • Frequency: 50 Hz • Maximum power consumption: 29.6 kVA • Total full-load current: 42.8 A • Maximum motor current: 96 A • Short-circuit interrupting capacity: 15 kA • Electrical diagram number: W5201-121-772-2 Technical Specification Driven Tools No

Condition: excellent (used), Year of construction: 2015, Okuma GENOS L200E-MY CNC Lathe Technical Data Manufacturer: Okuma Model: GENOS L200E-MY Control: OSP-P300L-R Voltage: 400 V Phases: 3 P Frequency: 50/60 Hz Connected load: 15.3 kVA Rated current: 25.6 A Short-circuit withstand capacity: 2.5 kA Max. turning diameter: Ø 200 mm Max. turning diameter x length: Ø 200 x 380 mm Swing over bed: Ø 450 mm Swing over cross slide: Ø 300 mm Workpiece weight (single-sided support): 120 kg Spindle diameter: Ø 100 mm Spindle nose: JIS A2-6 Spindle bore: Ø 66 mm Spindle speed range: stepless Spindle speed: 75 to 3000 rpm Number of tool stations: 12 Turret type: Multitasking V12 turret Tool holder, external turning tools: 20 x 20 mm Tool holder, internal turning tools: Ø 32 mm Rotating tool speed: 6000 rpm Travel (Z-axis): 400 mm Travel (X-axis): 165 mm Travel (Y-axis): 80 mm Feed range: 0.001 to 1000 mm/rev Rapid traverse Z-axis: 25000 mm/min Rapid traverse X-axis: 20000 mm/min Hedpfxoy R A N Aj Anyst Rapid traverse Y-axis: 10000 mm/min Tailstock quill diameter: Ø 55 mm Tailstock quill stroke: 80 mm Machine height: 2040 mm Footprint: 2120 x 1750 mm Machine weight: 4800 kg Year of manufacture: 2015 No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.