Used Optic for sale (1,587)

Condition: excellent (used), Optical Control Model: OC-SCAN CCX.3 The OC-SCAN CCX.3 is a non-contact component counter specifically designed for SMD production. It uses X-ray technology to count electronic components such as SMD reels, matrix trays, cut tape, and sticks with an accuracy of over 99.9%. Key Features: Automatic component detection: The machine detects and counts unknown components without prior programming. Quad-Count Mode: Allows simultaneous counting of four reels in just 20 seconds. Drypack Support: Takes into account the interference caused by dry packs and counts only the components. Order Counting: Counts components precisely according to the customer order. Integration with ERP systems: Compatible with systems such as SAP or ASM SiMM for seamless inventory management. 2D Inspection: Enables the inspection of printed circuit boards and electronic components. Cedpfjwdwvksx Abzohd ​ ​Technical specifications Counting accuracy: >99.9% Counting time:

Condition: good (used), Year of construction: 2006, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2006 Motor power 7,5kW Chsdoxtxi Ijpfx Abzsd Input table automatic feeding 4,10m (throughfeed system) Outut table automatic 6 pcs. kickers on right outfeed table Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Chodpfx Ajw Sy T Hsbzjd Storage location: Nattheim

Condition: used, Dimter OptiCut S 75-4 automatic optimization cross-cut saw (pusher saw) for cross-cutting wood or plastics according to imperfections (fluorescent chalk) and length, including cross conveyor for feeding. Technical specifications will follow shortly. cutting height: Max. 100 mm input length: max. 6,300 mm cutting width: Max. 200 mm Saw blade ø: Max. 600 mm Cedpfxoxrtmls Abzehd feed: 60 m / min engine: 7,5 kW

Condition: used, Year of construction: 2019, High-precision, non-contact dimensional inspection system designed for shop-floor use. Ideal for measuring molded, turned, punched, or milled components with speed and accuracy. Features automated measurement routines, intuitive software interface, and comprehensive reporting tools. Robust construction ensures reliable performance in industrial environments. Perfect for quality control and production optimization. Machine has scratches on the measuring glass Chsdpfxjxnlype Abzjd

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, rotational speed (max.): 1,250 rpm, travel distance X-axis: 850 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, controller model: Heidenhain TNC 355, TECHNICAL DETAILS X-travel: 850 mm Y-travel: 1,000 mm Csdexn I U Njpfx Abzehd Z-travel: 700 mm Tool holder: SK 40 Speed: 15 - 1,250 rpm Spindle quill: 75 mm MACHINE DETAILS Control: Heidenhain TNC 355

Condition: ready for operation (used), Year of construction: 2011, Marel Opticut Portion Cutter is a modern device designed for precise portioning and cutting of meat, poultry, fish, and ready-made meals. Manufactured in 2011 by the renowned company Marel, it is part of a series of premium machines that combine accuracy, reliability, and efficiency in the food processing industry. The machine is equipped with an Intralox S1100 Flat belt with a width of 253 mm and a length of 3100 mm, which ensures smooth product transport and high hygiene standards. The 3×380–480V power supply and 9.5 kW power guarantee efficient operation even in intensive production conditions. The Opticut cutting system allows for even, repeatable portions with precise control of the thickness and weight of each piece, which translates into minimized raw material waste and maximum production efficiency. Thanks to its solid stainless steel construction, the machine meets the highest hygiene standards and is easy to keep clean. The Marel Opticut Portion Cutter is used in meat, poultry, and fish processing plants, as well as in the production of ready meals and snacks, where repeatability and cutting precision are important. Technical specifications: Manufacturer: Marel Model: Opticut Year of manufacture: 2011 Capacity: 7200 kg/h Up to 120 cuts per minute Belt type: Intralox s1100 ftac Knife type: Vertical guillotine blade Belt dimensions: 253 x 3100 mm Power supply: 3×380–480V, 50/60 Hz Power: 9.5 kW Construction: stainless steel Machine dimensions: L: 2300 mm x W: 700 mm x H: 2750 mm Advantages: ✅ Precise portioning and cutting with high repeatability Csdpfxsxn R Tuo Abzehd ✅ Efficient operation in production line systems ✅ Hygienic stainless steel design ✅ Easy to operate and clean ✅ Excellent workmanship – Marel brand ✅ Includes a trolley for accessories and spare parts

Condition: good (used), Year of construction: 2005, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2005 Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Outut table automatic 6 pcs. kickers on left outfeed table Chodpfxjxtxg Ho Abzed Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: used, Year of construction: 2004, Price: On request Undercut crosscut saw Weinig Dimter Opticut S 75 Serial no. 1832.14 Year of construction 2004 Automatic feed system Max cutting height 160mm Max cutting width 360mm Up to 60 m/min Dimensions machine 1300x1300x1700 mm (LxWxH) Dimensions input table 7600x2000x1100 mm (LxWxH) Dimensions output table 6300x2100x1050 mm (LxWxH) Available by week 7 in 2025 - Year: 2004 - Documentation available: No - Serial number: 1832.14 - Max. saw height [mm]: 160 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Codjwnhk Hopfx Abzohd Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, mileage: 3,19,000 km, power: 331 kW (450.03 HP), fuel type: diesel, overall weight: 32,000 kg, first registration: 03/2017, emission class: euro6, Equipment: ABS, air conditioning, Scania G 450 First registration: km Csdexqk U Dopfx Abzohd 8X4 Leaf/Leaf suspension Opti Cruise transmission Tyres in very good condition German vehicle Hyva body Thermo/Insulated tipper Phone: We are happy to assist you with financing or leasing EU sale: net price with submission of company documents and VAT number VAT deposit €2,000 We speak English We speak Serbian/Croatian Our service for you: - Customs plates - Export papers and EUR1 - Worldwide transport - Overnight accommodation available - Transfer from Munich airport or Passau train station Phone:

Condition: used, Year of construction: 2022, machine/vehicle number: 700281303, Bühler Sortex A Optical Sorting Machine (2022) Codoxqzl Tspfx Abzehd

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, saw drive: 15,000 W, power of the servo motor: 11,000 W, Machine completely overhauled / as new with new electrics and Siemens S7 control. Completion upon order. Cross-cut saw with chalk mark detection. Chsdpfx Aev Diy Aobzed Wood cross sections: 430x30 / 300x150 / 200x200 mm DIMTER OptiCut 602 R Saw blade diameter: 650/700 mm Feed speed: 120 m/min Saw motor: 15 kW SEW servo drive 11.00 kW with frequency inverter Cross-cutting accuracy: +/- 2 mm

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, Dimter OPTICUT 204R OPTICOM ASSIST control – programming in CZ/DE/EN Programming – by classes, quality, marking cut, length cut – full optimization Very simple programming Full documentation – operating manual, parts catalogue, pneumatic and electric schematics Maximum cutting length 4000 mm (extendable up to 6700 mm) Maximum cutting height 100 mm Maximum cutting width 260 mm Saw blade diameter 500 mm Feed speed 180 m/min Number of sorters – 4 (expandable up to 10) Chsdpfx Aboxgdwdozsd Saw lift – pneumatic Cutting accuracy +/- 0.5 mm The machine is powered and available for testing The machine is like new, 100% complete and fully operational! We can arrange transport within the EU.

Condition: good (used), With the OptiControl instrument measuring system from WEINIG, you can optically measure drills, PowerLock and hydraulic instruments and transmit the highly accurate measurement results to the woodworking machine. The device's 20x optical magnification ensures accurate measurement results. The measurement results are transmitted to the planer via a computer and the PowerCom software. The machine can also create completely new profiles. OptiControl PowerCom offers you: measuring instruments recording data from measured instruments creating new profiles Online data transmission optimization of work tasks time saving when setting up the planerTool measuring stand for measuring tool radius and height. Measurements can be read of digital read-outs. Technical details Tool diameter min - 100mm Tool diameter max - 300mm Tool length maximum - 330mm 220v - 50hz Cjdpexf Tpaofx Abzjhd Weight - 180 kg Supplied with operating instructions.

Condition: used, Year of construction: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defecting mode. This machine is ideal for precise solid wood cutting, featuring automated detection and elimination of material defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of construction: 2001 Commission no.: 0682-10 Chodpfx Abswtgcxezjd Rotary current: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Nominal output: 11 kW Fuse protection: 25 A Condition: used

Condition: used, mileage: 3,19,000 km, power: 331 kW (450.03 HP), fuel type: diesel, overall weight: 32,000 kg, first registration: 03/2017, emission class: euro6, Equipment: ABS, air conditioning, Scania G 450 First registration: km 8X4 Leaf/Leaf suspension Opti Cruise transmission Tyres in very good condition German vehicle Hyva body Thermo/Insulated tipper Phone: We are happy to assist you with financing or leasing EU sale: net price with submission of company documents and VAT number Cjdexqk U Repfx Abzohd VAT deposit €2,000 We speak English We speak Serbian/Croatian Our service for you: - Customs plates - Export papers and EUR1 - Worldwide transport - Overnight accommodation available - Transfer from Munich airport or Passau train station Phone:

Condition: used, mileage: 13,01,378 km, power: 352 kW (478.59 HP), first registration: 06/2009, fuel type: diesel, color: other, axle configuration: 4x2, tire size: 385/55, fuel: diesel, wheelbase: 4,300 mm, brakes: retarder, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro5, suspension: air, loading space width: 2,500 mm, loading space length: 5,150 mm, loading space height: 3,040 mm, Year of construction: 2009, Equipment: ABS, parking heater, retarder, spoiler, = Additional options and accessories = - Air Suspension - Double fuel tank - Electrically adjustable door mirrors - Electrically operated windows - OptionCruise - Radio CD player - Roof Spoiler - Sleeper cabin - Spoilers = More information = Technical information Number of cylinders: 6 Engine capacity: 12.740 cc Axle configuration Tyre profile: 40% Suspension: air suspension Chjdpfx Abexgtmhozod Front axle: Tyre size: 385/55; Steering Rear axle: Tyre size: 295/60; Double wheels Measures Dimensions (LxW): 753 x 255 cm Weights Empty weight: 8.820 kg Carrying capacity: 10.680 kg GVW: 19.500 kg Max. towing weight: 50.000 kg Interior Number of seats: 2 Identification Registration number: BV-ZX-08 Serial number: XLER4X20005225933

Condition: used, Year of construction: 2001, Electrical cabinet for Dimter OptiCut 602R Chsdpfexp Uxwjx Abzed Wiring diagram available

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Weinig Dimter OptiCut 200 Elite: Year of manufacture: 2004 Technical details: - Maximum cutting length: up to 6.3 meters - Maximum cutting width: 300 mm - Maximum cutting thickness: 100 mm - Number of ejectors: 3 units Feeding speed: Adjustable, from 10 to 250 meters per minute Control system: PLC with user interface, display, and optimization software Sensors: Equipped with various sensors for defect detection and cutting optimization Additional features: Automatic detection of defects and markers Integrated waste management system Cjdsw Dh Rrepfx Abzjhd Possibility of integration with other production systems Machine characteristics: Precision: High cutting accuracy thanks to advanced optimization algorithms Performance: The machine is capable of quickly processing large volumes of wood, increasing production efficiency Safety: Equipped with various safety features, such as protective covers and emergency stop systems Flexibility: Adaptable to different types and dimensions of wood, making it a versatile tool for various applications in the woodworking industry Installation, commissioning, and operator training are available at an additional cost.

Condition: like new (used), Tool measuring stand for measuring tool radius and height. Measurements can be read of digital read-outs. Technical details Chodpohu Rkpofx Abzjd Tool diameter min - 100mm Tool diameter max - 300mm Tool length maximum - 330mm 220v - 50hz Weight - 180 kg Supplied with operating instructions. Supplied with 40mm or 50mm arbor as needed.

Year of construction: 2010, condition: used, Newtec CELOX optical sorting line Machine has been upgraded to the newer type CELOX in 2016 The order is based on the following specifications Ambient temperature ± 5 – 25 ºC. Product Clean, washed carrots Cjdpfourhx Nox Abzjhd Capacity: 8 to 10 tons per hour, depending on the batch (quality and sorting) Product foreign materials The Celox cannot detect foreign materials such as glass, wood, stones etc. Functionality: Length: +/- 3mm (less than 1% errors) Diameter: +/- 1mm (less than 1% errors) broken: 60-65% is removed (on "normal" broken carrots) there will be 5-6% good carrots among the errors C/S shape: 85-90% is removed. There will be 3-4% good carrots among the errors Volume: +/- 5% -Incl. conversion of complete camera unit to new version -9 Cameras with 8 megapixel resolution (current 2 magapixel) Cameras look at the carrots from above and below at an angle -Better detection of root rot -Better software for deformed products -Better software for quality and dimensions -Incl. set of vibrating channels for the new belts

Condition: used, Year of construction: 2022, Optimization cross-cut saw Weinig type OptiCut 260 for automatically cutting wood according to defects (fluorescent chalk) and lengths. The separate measuring station records the lengths and marked defects. Technical specifications: tba saw blade ø: 500 mm input length: 400 - 6300 mm input thickness: 12 – 80 mm feed: max. 250 m/min cutting height: 260 mm bars: about 1 second saw motor: 7,5 kW marking station: 5.000 mm exit belt: 7,5 m Cedpfxsw Nitqj Abzjhd Control: OptiCom Pro Construction year: 2022

Condition: used, Year of construction: 2007, No. 3177 Chjdpfeu Atmujx Abzsd Optimizing cross-cut system Grecon Dimter OptiCut 200-1 Used, year of construction 2007 For cross-cutting fixed lengths Wood dimensions to be processed: Input lengths min./max. 3000 - 5000 mm Input widths min./max. 80 - 200 mm Input thicknesses min./max. 38 - 80 mm Timber cross-sections max. 200 x 50 Final timber length min./max. 700 - 1000 mm Average number of cuts / board 5 Wood types: Softwood or hardwood Performance of the system: Feed speed max. 180 m/min, infinitely variable Time per cross-cutting process incl. brakes 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt in front of saw Length 1.5 m coupled with feed motor of the saw Item 2: OptiCut 200-1 automatic cross-cut saw in left-hand design With built-in length measuring wheel and built-in blow-out device for waste Graphics-capable input terminal, 1 / 4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is fed from the left Pos. 3: Outfeed conveyor belt / sorting station with drive unit, without ejector Belt length approx. 1.5 m Machine already dismantled and stored The infeed table was not used by the previous owner. 2 feed rollers were installed for the material feed. The conveyor table is there, only the rubber belt is missing. Sale on behalf of customer, ex location Austria, without transportation and assembly Errors in description and price excepted Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: like new (used), Tool measuring stand for measuring tool radius and height. Measurements can be read of digital read-outs. Technical details Tool diameter min - 100mm Chedpfx Ajw U Sxaebzjd Tool diameter max - 300mm Tool length maximum - 330mm 220v - 50hz Weight - 180 kg Supplied with operating instructions.

Condition: used, Year of construction: 2004, Automatic optimization cross-cut saw (push-type saw) Dimter type OptiCut 700 for cross-cutting wide timbers according to defects (fluorescent chalk) and lengths. Without vacuum lifter. Cedew Nhgpjpfx Abzohd cutting height: Max. 120 mm cutting width: max. 700 mm input length: max. 5,300 mm