Used Opticut 150 for sale (9,605)

Condition: used, Year of construction: 2005, Technical details: workpiece diameter: 63,5 mm centre distance: 350 mm honing length max.: mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,70x2,x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Swivel range of the fine wheel head (U-axis) degrees Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm Fpsdpfx Ajwrh H Njdrok tool Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recommendation, see chap. 8th Hydraulic fluid HLP D 46 approx. Itr 100 Speeds and feeds Tool speed (continuously adjustable) max. 1 / min 2000 Feed rates Rapid traverse / feed Z direction up to m / min 2 X direction up to m / min 2 U-direction up to m / min 2 V-direction up to m / min 2 C3 direction max.degree / sec 12 Electrical equipment Operating voltage V 400 Control voltage / lighting voltage V DC / AC 24/2 Frequency Hz 50 Power requirement approx. KVA 27 If the electrical installation has to be carried out according to customer specifications, only the information in the electrical documentation applies. Motor data Servo drives: Nm 1 / min Tool drive C1 27.0 00 Workpiece drive C2 27.0 00 X-axis 20.0 00 Z-axis 20.0 00 U-axis 6.0 00 Vertical portal (V1 axis) 6.0 00 Portal horizontal (U1 axis) Gripper axis of rotation C3 5.0 00 Loading slide (X1 axis) 5.0 00 Three-phase motors: KW 1 / min Hydraulic motor 1.5 1410 Central lubrication 0.07 Coolant pump 4 2840 Hydraulic equipment Delivery rate Itr / min 21 System pressure bar 50 Clamping pressure for: headstock max. Bar 35 Clamping tailstock min./max. bar 20 Only available if required. Not all limit values ??can necessarily be reached at the same time. If several maximum values ??come together in a processing task, performance restrictions must be expected! We reserve the right to make changes to the specified constructions, dimensions and weights *

Condition: used, Year of construction: 2015, operating hours: 6,123 h, total width: 1,500 mm, total height: 1,700 mm, total length: 2,000 mm, briquette diameter: 50 mm, space requirement width: 1,500 mm, space requirement length: 2,000 mm, space requirement height: 1,700 mm, power: 5.5 kW (7.48 HP), filling opening length: 1,040 mm, filling opening width: 1,040 mm, No. 04545 Briquetting press with screw conveyor WEIMA C 150 Used, year of construction 12/2015, 6123 operating hours, very good condition Hydraulic briquetting press for compacting dry wood shavings, sawdust, paper, cardboard and comparable materials Throughput capacity (depending on material) approx. 30 - 50 kg/h Briquette diameter 50 mm Motor power 5.5 kW Fodpfozpxhijx Adrspk Hydraulic pressing mechanism Max. clamping jaw stroke 10 mm Storage hopper with discharge arm / agitator Level sensor for automatic operation Manual and automatic operation Siemens SIMATIC PLC control Briquette length monitoring for the production of uniform briquettes Storage hopper approx. 1040 x 1040 mm LW Separate hydraulic unit with oil tank CE-compliant Incl. screw conveyor type RFS. NW 250 x 5200 Motor power 1.5 kW Conveying capacity approx. 4.0 m3/h Filling opening approx. 900 x 300 mm LW Incl. geared motor, feeding section and protective covers Incl. complete technical documentation Transport dimensions briquetting press approx. 2000 x 1500 x 1700 mm LWH, weight approx. 1000 kg Transport dimensions screw conveyor approx. 6500 x 500 x 500 mm LWH, weight approx. 800 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: excellent (used), Year of construction: 2017, Batch mixer, type WBX 150 1 Control unit for the mixer 1 Manual shut-off valve 1 Separate control panel ("remote control") Technical data for the 150 series, WBH 150: Parameter | Value Fedpfxjztwbvj Adrspk Nominal volume | 150 l Usable volume | 105 l A | 1,460 mm B | 670 mm C | 754 mm Empty weight | approx. 270 kg Subject to prior sale Please submit inquiries only by email. Note: The machine is in storage and can be inspected on site. The buyer must arrange for shipping. This is not included in the quoted price.

Condition: used, Year of construction: 2007, functionality: fully functional, NAKAMURA Model WT-150 MMY, used, year 2007 CNC turning machine Fanuc 18 iTB control Swinging diameter above the guide: 190 mm Max. turning diameter/turning length: 190 mm / 400 mm Bar capacity: 51 mm Main spindle 15/11 kW, max. speed 5,000 rpm Counter spindle 11/7.5 kW, max. speed 5,000 rpm Spindle nose: A2-5 Draw tube diameter: 52 mm (L/R) Spindle bore: 63 mm (L/R) C-axis incremental input: 0.001 degrees 2 x 12-station turrets, all stations powered 24-station indexing Tool holder dimensions, outer/inner: 20mm/25mm/32mm Speed of rotating tools: 60 – 6,000 min-1 Y-axis +/- 35 mm on the upper turret Travel X1/X2-axis: 167.5 mm Travel Z1/Z2-axis: 465 mm Rapid traverse X1/X2-axis: 16 m/min Rapid traverse Z1/Z2-axis: 40 m/min Chip conveyor type A, left Fpedozqdpnepfx Adrjk Finished part discharge type G, right Coolant system Chip conveyor CE marking Equipment: Spindles, clamping devices & bar capacity Main spindle option: bar capacity 65 mm (left) at max. 4,500 rpm Draw tube adapter M74x1.5 to A-6 and M58x1.5 to A-5 (with coolant hole) Chuck air blow-out, outer left Coolant and air blow-out through the right spindle Axes, control & software options Y-axis (+/- 35 mm) on the upper turret Helical interpolation (thread milling) Polygon turning function (without holder) Intelligent handwheel 5 pairs of free M-functions (M-codes) Software: NC-Praktiker 2000 for Windows (DIN-ISO programming system) Automation & part discharge Finished part unloader: Type G WT 150 (L=150" mm", ∅65" mm") Profile timing belt for part gripper G (WT 150, ∅65" mm") Collection tray A ∅65 mm for material scrap discharge Coolant, filtration technology & chip disposal Chip conveyor: Hinged belt conveyor Knoll (Type 200 S-1) incl. interface Cyclone filter system: HA 180-4 incl. 2 coolant pumps Preparation for Brinkmann pumps Submersible pump TAL 401/140 51Y with TAL401 adapter plate

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 Fedpjgrzh Ejfx Adropk 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Year of construction: 1999, condition: ready for operation (used), Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details. Fpsdpfx Ajyxrt Tjdrsk

Condition: new, mileage: 10 km, power: 110.32 kW (149.99 HP), fuel type: diesel, wheelbase: 3,400 mm, fuel: diesel, fuel tank capacity: 90 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 4, number of seats: 3, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, full service history, non-smoking vehicle, onboard computer, power assisted steering, start-stop system, tachograph, traction control, truck registration, ISUZU M30H 150 hp Permissible total weight: 7500 kg Wheelbase: 3365 mm Standard equipment: • AGR - DPD - SCR • 7-inch multifunction display • Exhaust brake • Electrically adjustable and heated exterior mirrors • Immobilizer • Seat belt warning • Headlight wipers • Manual air conditioning • Electric parking brake • Driver's seat with suspension • Fog lights (front/rear) • DAB+ radio - Bluetooth • USB charging port • Central locking with remote control • Multifunction steering wheel • Driver and passenger airbags • Electric windows • Hill start assist (HSA) • Bi-LED headlights and taillights • Headlight beam adjustment • Automatic headlights • Warning lights for insufficient securing of the driver's cabin against lifting • Twice adjustable steering wheel • Speed limiter (90 km/h) • Start-stop system • Removable cup holder • Spare tire ENGINE ISUZU 4JZ1E6N diesel engine, 4 cylinders, 16 valves. Common-rail injection with DENSO i-Art direct injection. Turbocharging with electronically controlled VGS compressor, intercooler, variable exhaust valve control. DISPLACEMENT: 2999 cm³; POWER: 110 kW (150 hp) at 2800 rpm; MAXIMUM TORQUE: 375 Nm at 1280 – 2800 rpm. EXHAUST CONTROL - EURO VI OBD-E. Safety Package 2 ABS: Anti-lock braking system DWS: Front collision warning system AEBS: Active emergency brake assist ASR: Traction control system AEBS for pedestrians and cyclists: Automatic emergency braking system with pedestrian and cyclist detection EBD: Electronic brake force distribution FVSN: Following vehicle warning system Junction warning: Blind spot warning when turning EVSC: Electronic stability control DDAW: Driver attentiveness warning system AEBS: Automatic emergency braking system LDWS: Lane departure warning system RM: Rear view camera TSR: Traffic sign recognition MOIS: Motion detection system BSIS: Blind spot assist TPMS: Tire pressure monitoring system Tanks: 100 l, 14 l AdBlue® Transmission and gear ratios: Manual, 6-speed Capacity: 3 persons Axles: 2, including driven rear axle with twin tires Brakes: Front and rear: 310 x 42 mm, internally ventilated disc brakes with asbestos-free pads. Hydraulic system with brake booster and ABS according to EC standards, separate brake circuits on both axles. Drum parking brake on the driveshaft. Suspension: Front and rear: Parabolic springs with integrated rubber buffers, double-acting hydraulic telescopic shock absorbers. Stabilizer bar front and rear. Electrical system: Voltage 24 V – Alternator 90 A – 2 x 90 Ah battery (F-Space: 2 x 70 Ah) VEHICLE CONSTRUCTION DATA Hooklift system 90 cm City System Marrell Length: 3300 mm Load capacity: up to 4000 kg EQUIPMENT Container protection: Internal hydraulics Hydraulic distributor Hydraulic pump Oil tank Wide rollers ensure container stability Hook mechanism frame made of stainless steel Steel structure shot-blasted and painted with epoxy primer Side marker lights Fpsdpfszr Txbsx Adrok Work platforms Work light 1 unit Auxiliary headlights Frame of the rear lamp cover With us, there are no hidden payments: - Delivery costs 0, - Documents 0, - First inspection 0,- Financing or leasing FURTHER INFORMATION: Premium Kfz Outlet GmbH Fichtenhöhe 3 02829 Schöpstal OT Ebersbach Germany We are at your service: ONLINE SALES we speak German we speak English мы говорим по-русски mówimy po polsku

Year of construction: 1989, condition: ready for operation (used), Built in 1989 Size max 320 x 400 mm Size trimmed max 305 x 380 mm Size trimmed 100 x 125 mm Product thickness max 80 mm min 6 mm Speed max 6.000 c/h Feeding height max 80 mm Equipment • infeed from the right side • automatic infeed with integrated pre stacker • cut counter • Equipment for sheet-fed • 1 set of clamping plates and holders • 3 sets of cutting sticks • 2 set of knives • external knife changing device Fsdpfx Aodubvqsdrepk • central lubrication • belt delivery

Condition: ready for operation (used), Feeding depth max 1.500 mm Feeding height max 155 mm Table height 870 mm Cutting width 1.500 mm Front table length 750 mm Equipment • program Fsdpfx Asd Iapysdrepk • air table • side table right • side table left • light barrier • 2 knives

Condition: good (used), Size: 320 x 420 mm; min 75 x 150 mm Speed: max 9000 Ex./h Fpodpor Duu Asfx Adrjk Number of stitches Standard: 11 Stitching length: 19 mm Power requirements: 50 Hz, 3 Phasen kW (220/380V, 50Hz) Compressed air: 4 bar Weight: 2300 kg (approx.) Engine speed: 2,5 kw

Condition: excellent (used), Year of construction: 2009, Arburg 420C 1000-350/150 / Production line with the Arburg Multilift H side robot / 2K machine Year of manufacture: 10.2009 Injection unit: Screw diameter: 45 mm Shot weight: 210 g Injection pressure: 1670 bar Dosing volume: 230 ccm Clamping unit: Clamping force: 100 t Tie bar distance: 420x420 mm Mold size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with the Arburg Multilift H side robot 2K machine with rotary table Control system with air valve Hydraulic core pull x 2 Control system with hot runner Reinforced injection units – bimetal Proportional valves on injection units – precise injection The vertical injection unit – screw diameter: ⌀30 mm – 71 g/shot Rotary table available at an extra charge Fodpfx Adjzc N Etoropk Side robot Arburg Multilift H Year of manufacture: 2009 5-axis robot: Z-axis with servo motor (electric); X, Y, B and C axes pneumatic Safety package for robots Robot with adapter, conveyor belt, protective housing Purchase of the robot and conveyor belt available at an extra charge Dimensions: Weight: 5210 kg All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request.

Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron Magna T(MTs) 150-450 / Production line with Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt, and safety enclosure / Machine in very good technical condition Year of manufacture: 2017 Injection unit: Screw diameter: 45 mm Shot weight: 215 g Injection pressure: 1,984 bar Dosage volume: 226 cm³ Clamping unit: Clamping force: 150 t Tie bar distance: 510x510 mm Platen size: 740x740 mm Ejector: hydraulic Clamping system: toggle Control system: B&R - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air valve x 1 Fedpfxezc Nrtj Adrepk Hydraulic core pull x 1 Hot runner controller x 36 (available for an additional charge) Injection unit is wear-resistant and corrosion-resistant Main motor – servo motor with inverter drive Central lubrication Machine equipped with cylinder / battery with compressed nitrogen (extra charge for high-speed operation) Wemo 6-5 xDesign robot Year of manufacture: 2017 4-axis robot: 3 axes driven by electric servomotors Robot safety package included Robot with adapter, Wemo WCS-R conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 7,500 kg Length/Width/Height: 6.10 x 1.97 x 2.60 m Drive: Pump/motor: 11.5 kW Heating capacity: 11.3 kW Total power: 22.8 kW All machines offered are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: 25,000.00 EUR net (price without robot)

Condition: excellent (used), Year of construction: 2005, Arburg 1200T 800-150 / Vertical Injection Molding Machine with Rotary Table Year of Manufacture: 2005 Injection Unit: Screw Diameter: 25 mm Injection Weight: 45 g Injection Pressure: 2500 bar Dosing Volume: 54 cc Clamping Unit: Clamping Force: 80 t Tiebar Distance: 0 x 0 mm Clamping Platen Size: 1200 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control System: SELOGICA Additional Equipment: Air Valves x 6 Hydraulic Core Pullers x 6 Control System with Hot Runners Injection Unit Hardened - Bimetal Rotary Table Diameter: 1200 mm Kistler Sensor - Mold Pressure Control Machine serviced by the authorized Arburg Service Center in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92 x 1.61 x 3.78 m Drive: Pump/Motor: 22 kW Heating power: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Fodpfozc Nqcsx Adrepk Price: Upon request

Condition: excellent (used), Year of construction: 2015, Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Molding Machine with Rotating Table Year of manufacture: 2015 Injection unit: Screw diameter: 35 mm Injection weight: 175.6 g Injection pressure: 2743 bar Dosing volume: 193 cc Clamping unit: Clamping force: 150 t Type distance: 0 x 0 mm Clamping platen size: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 Fedpfx Aozc Nubedrepk Additional equipment: Vertical injection molding machine with rotating table Hybrid machine: high-speed, energy-efficient, and very quiet Air valve x 5 Hydraulic core pull x 1 Control system with hot runners x 12 Injection unit is wear-resistant and corrosion-resistant Rotating table diameter: 1500 mm Rotary table, driven by a servo motor and controlled by an inverter Dimensions: Weight: 11300 kg Length/Width/Height: 3.83 x 1.50 x 4.07 m All machines offered are started up by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2014, Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating hours: approx. 29,000 in automatic mode Year of manufacture: 2014 Injection unit: Screw diameter: 50 mm Injection weight: 402.2 g Injection pressure: 1,714 bar Shot volume: 442 ccm Clamping unit: Clamping force: 150 t Tie bar distance: 520x470 mm Dimensions of platens: 760x755 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6P - touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Fsdpfxezc Nuhj Adrjpk Operating hours: approx. 29,000 in automatic mode Total operating hours: 36,714 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and corrosion-resistant Main drive motor - servo motor driven by inverter - energy saving Dimensions: Weight: 6,600 kg Length/Width/Height: 4.82x1.42x2.20 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2005, Arburg 470C 1500-150/150 / 2K machine / machine in very good technical condition Fpodpfjzc N Izjx Adrok Year of manufacture: 2005 injection unit: screw diameter: 25 mm injection weight: 49 g Injection pressure: 2500 bar Metering volume: 54 ccm Clamping unit : clamping force: 150 t tie bar distance: 470x470 mm size of clamping platens: 685x685 mm Ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: 2K machine Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection type of injection unit: Vario - this offers the possibility to use the injection unit e.g. for lateral spraying Parallel movements The vertical injection unit - screw diameter fi 25 mm (49 g/hp) It is possible to change screw diameters in both injection units for the screw diameters recommended by the manufacturer: 30, 35 mm Dimensions: Weight: 5700 kg Drive: Pumps/motor: 30 kW Heating power: 2 x 9,4 kW Total power: 48,8 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2003, Arburg 570C 2000-350/150 / Production Line with Side-mounted Arburg Multilift Robot / 2K Machine Year of Manufacture: 2003 Injection Unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2,120 bar Dosage volume: 182 ccm Fpedpfx Aozc N Twedrsk Clamping Unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with side-mounted Arburg Multilift robot 2K (two-component) machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner integration Reinforced injection units – bimetallic Proportional valves on injection units – precision injection Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2007, No. 3177 Automatic optimizing cross-cut saw WEINIG Dimter OptiCut 200 - 1 Used, year of construction 2007, machine already dismantled For cutting timber to fixed lengths Timber dimensions to be processed: Minimum / maximum input length: 3000 - 5000 mm Minimum / maximum input width: 80 - 200 mm Minimum / maximum input thickness: 38 - 80 mm Maximum timber cross-section: 200 x 50 mm Minimum / maximum finished timber length: 700 - 1000 mm Average number of cuts per board: 5 Types of wood: softwood or hardwood System performance: Maximum feed speed: 180 m/min, continuously adjustable Time per cutting cycle, including braking: 0.7 - 1.2 seconds Overview of components: Item 1: Infeed conveyor belt upstream of the saw Length: 1.5 m, coupled to the saw’s feed motor Fodpfxsu Atmue Adrspk Item 2: Automatic cross-cut saw OptiCut 200 - 1, left-hand version With integrated length-measuring wheel and integrated blow-out device for waste pieces Graphics-capable operator terminal with 1/4 VGA display, numerical keypad and function keys, including the OptiCom software package for system control The machine is fed from the left-hand side Item 3: Outfeed conveyor belt / sorting station With drive unit, without ejectors Conveyor length: approx. 1.5 m The infeed table was not used by the previous owner. Two feed rollers were installed for feeding the material. The conveyor table is included, only the rubber conveyor belt is missing. Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 09/2027, year of last overhaul: 2026, total width: 1,200 mm, total height: 1,300 mm, input frequency: 50 Hz, empty load weight: 2,000 kg, overall weight: 2,000 kg, type of input current: three-phase, electrical fuse: 63 A, TOP Spiral Mixer Kemper SP 150 AL with 2 mixing bowls Mixer for a maximum of 250 kg of dough Dough machine with cover with 2 timer switches and 2 speeds Connection 400V, 63A-CEE plug Dimensions: 1200 x 1550 x 1300/2000 mm, WxDxH Used machine, refurbished with warranty + service package Quality from a specialist company! Fpedpfew S Sncsx Adrek Benefit from over 35 years of experience! Option: Delivery service additional mixing bowls maintenance contract Experience our world of bakery machines!

Condition: excellent (used), Year of construction: 1993, Manufacturer: SCM Fedpfeyx Nadsx Adrepk Model: T150 Class Year of manufacture: 1993 Motor upgraded: 5.5 kW Tilting range: -10° to +45° Electromagnetic brake Motor with 2 speeds / pole-changeable Speed settings: 3000/4500/6000/7000/10,000 rpm Forward/reverse rotation Table size: 2700 x 700 mm Spindle diameter: 30 mm Table extension: 2 x 650 mm Extendable frame support Aluminum fence jaws Milling fence with fine adjustment - Electric height adjustment - Electric tilt adjustment Feeder: Wegoma VS 44 - 4 rollers Extraction connection: 120 x 120 mm Space requirement: approx. 2700 x 1300 x 1600 mm Weight: approx. 1000 kg Location: 54634 Bitburg, loaded free on truck, unpacked Delivery as-is, as inspected and function tested without refurbishment, without warranty or guarantee

Condition: ready for operation (used), functionality: fully functional, CNC FLOOR TYPE BORING MACHINE MAKE TITAN MOD. AF 150 SPINDLE SIZE 150MM, ISO 50 X TRAVEL 3000MM Y TRAVEL 2000MM Fpodpfx Aeztq Ayedrjk W TRAVEL 800MM ROTARY TABLE 2000 X 1700 MM ROTRARY TABLE TRAVEL 1000MM LOADING CAPACITY ON TABLE 15 TON CNC NUM

Condition: new, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20,0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel Fpodpfsxabkbjx Adrjk - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 2,052 h, load capacity: 15,000 kg, lifting height: 3,180 mm, fuel type: diesel, mast type: simplex, construction height: 2,940 mm, fork carriage width: 1,700 mm, fork length: 1,100 mm, empty load weight: 25,060 kg, total length: 3,800 mm, drive type: Diesel, construction width: 2,000 mm, Compact forklift – Diesel Load center: 600 Fpjdpfxsy Tzqqo Adrjk Fork width: 160 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid tires Front tire size: 40x20x30 Rear tire type: Solid tires Rear tire size: 28x12x22 Description: In addition to this autumn model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-to-own and financing options at favorable terms are always possible for us. We would also be happy to buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this ATAIR IV D 150CV Super Compact. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons upwards. We will also gladly display your vehicle in our showroom for consignment sale. Side shifter, fork positioner Fork positioner opening range: 350/1120 mm Heater, full cab

Condition: excellent (used), Catalogue number: 7889 TECHNICAL DATA track width: 230mm shaft width: 230mm max blade diameter: 350mm / 400mm blade bore diameter: 80mm max cutting height with 350 / 400 blade: 115mm / 150mm table width (with clearance): 1200mm table length: 1900mm – from above: lock/blockers drive shaft, toothed shaft with saw blades 2 sliding/pressure rollers – from below: guide lock/blockers track 2 sliding rollers in the table feed speed adjustable manually feed motor approx. 2.2kW main motor: 30kW extraction nozzle diameter: 200mm overall dimensions (L/W/H): 2700x1800x2000mm weight approx.: 3000kg ADVANTAGES – Czech production – used multisaw – DTR technical documentation – very good condition Net price: 22,900 PLN Fsdpfx Adszlp Rtjrjpk Net price: 5,450 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7804 TECHNICAL DATA - Track width: 350mm - Shaft width: 330mm - Mounted blade: 300mm - Max blade diameter: 400mm - Blade bore diameter: 70mm - Max cutting height with 400mm blade: 150mm - Table dimensions: 2240x770mm – From above: - kickback/retractors - slip roller - retractors - smooth slip roller - shaft with saw blades - 2 slip and pressure shafts – From below: - roller in front of the table - guide - pawls - track - central track lubrication - electric raising of saw blade shaft 0.75kW - electric raising of machine body 0.75kW Fpodpfx Aszlp Nijdrsk - variable feed speed adjustment - Extraction nozzle diameter: 320mm - Main motor: 45kW - Overall dimensions (L/W/H): 2280x1820x2040mm - Weight: 2850kg ADVANTAGES – Czech production – Used multi saw machine – Technical documentation (DTR) – Very good condition Net price: 62,900 PLN Net price: 14,970 EUR depending on EUR rate 4.2 (Prices may change with significant fluctuations)