Used Optimizer Edger for sale (3,145)

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws Knodpfsnygvrjx Aanjf (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: new, Year of construction: 2023, functionality: fully functional, It is a perfect complement to obtain the desired width product from the edged plates. While providing ease of use with its simple, compact and versatile designs, it can be integrated into the existing facility of any business thanks to its easy assembly. - Models with 120-160 mm cutting heights - Possibility to apply 2 or 3 saws to the movable and fixed sleeve - Manual or automatic feeding - Automatic fueling - Possibility to process 1000 mm wide products Optional equipment; - PLC controlled manual or automatic feeding - Up to 3 axis movable saw option - Removal of waste from the system thanks to separator arms - Cutting easily and in the most efficient way with the alignment arms. Technical Specifications Max. Cutting Height : 120 mm / 160 mm Min. Cutting Height : 15 mm Max. Cut Width : 800 mm Max. Working Width : 1000 mm Kedpfx Aaerzakmenenf Min. Cut Length : 800 mm Max. Feed Rate : 40 m/min Saw Rotation Cycle : 3000 rpm Upper Rollers : 2 x 240 Bottom Rollers : 5 x Ø135 mm (120)

Condition: used, Edger Saw Weight: 3000 kg, Max cutting height: 800 mm, Max width: 600 mm, Minimal distance between saw blades 55/28, Max 4 sawblades, Kodpfxjv Ni Eij Aanjnf Sawing speed 0-50 m/min,

Condition: good (used), GRECON 3001 CROSS CUTTING OPTIMIZER A.COSTA VOLLMER ARTIGLIO PRIMULTINI STORTI Kjdpfxoqzh Ine Aanenf We also have all kind of Sawmill machines

Year of construction: 1997, condition: excellent (used), main engine 11 kW Kedpfx Aaji Dbvmenonf disc diameter max. 500mm cutting height max. 160mm cutting width 5 - 160 mm ruler with guide rollers feed speed adjustable on a gear motor machine dimensions (length/width/height) 170 x 130 x 130 cm weight ~ 500 kg

Condition: excellent (used), Raimann KS 310 BV edger multisaw - year of manufacture 1995 - German production - DTR - two movable discs TECHNICAL PARAMETERS: Kedpfx Aeir Euboanenf - track width 340 mm - cutting height max 120 mm - engine power 30 kW - disc diameters 250/360 mm - Possibility to put on a shoe - electric height adjustment - feed continuously adjustable 11-38 m / min - power of the feed motor 1.5 kW - two movable discs - three lasers - max element width 1000 mm - minimum element length 600 mm with a shoe 400 mm - four upper pressure rollers - spindle diameter 65 mm - sleeve diameter 80 mm - spigot diameter 250 mm Dimensions 230x220x230 weight 2500 kg

Condition: used, functionality: fully functional, We have a used Ahlström edger available for sale. It is in full working condition and comes complete with a set of blades/cutters. Knjdpfx Aexa Akpoanof

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3225x1750x1200 mm Weight 1200 kg Knsdpjvz Ezkofx Aansf Total power requirement 16,75 kw

Condition: new, Year of construction: 2024, The DESK-9 straight glass edger is an advanced machine designed for precise grinding and polishing of glass edges. With the ability to process glass with a thickness of 3 to 25 mm, the machine is extremely versatile and universal, suitable for various applications in the glass industry. Equipped with nine spindles, it ensures precise and even finishing of each edge, which translates into high quality of finished products. Thanks to its high power and wide range of processing speeds, the DESK-9 edger is able to cope with the most demanding tasks in a short time, which significantly increases work efficiency. The availability of various control options - manual with an LCD display, simple PLC control using a touch screen and PLC with pneumatic pressure on the polishing spindles - allows the machine to be adapted to the specific needs and preferences of the user, ensuring easy and intuitive operation. This machine is also characterized by high durability and solid construction, which guarantees long-term and reliable operation. The DESK-9 edger is the perfect solution for professionals in the glass industry who value precision, efficiency and the ability to adapt the device to individual needs. Available machine variants: Knsdpfx Aepbbznjanof 1. DESK-9_LCD: manual control with LCD display (non-touch) 2. DESK-9_PLC: simple control using PLC 3. DESK-9_PLC+PNEUM: simple control using PLC, pneumatic pressure on polishing spindles (on the last spindle and on bends) Advantages of the machine: • Versatility: Possibility to process a wide range of glass thicknesses (3-25mm), which makes the machine universal and adapted to various applications. • Precision: Nine spindles ensure accurate and even grinding and polishing of glass edges. • Efficiency: Thanks to its high power and wide range of processing speeds (0.5 ~ 6m/min), the machine is able to handle even the most demanding tasks in a short time. • Multi-variant: Availability of various control options (manual, PLC, PLC with PNEUMAT) allows the machine to be adapted to the specific needs and preferences of the user. This machine (DESK-9 with PLC control) is available "immediately", it is located in our warehouse in Poland - ul. Cisowa 3, Bilcza 26-026 Morawica | you can arrange a visit to see the machine work "live"

Condition: used, Dane techniczne: Szerokość gąsienicy: 350 mm Max wysokość cięcia: 110 mm Max średnica piły: 350 mm Płynna regulacja posuwu Automatyczny system smarujący Ochrona antyodbiciowa Culaga Króciec odciągowy: 200 mm Knsdpfopfarrex Aanjf Wyłącznik bezpieczeństwa Zasilanie: 380 V Moc silnika głównego: 25 kW Wymiary całkowite: Długość: 2400 mm Szerokość: 1500 mm Wysokość: 2100 mm

Condition: excellent (used), Max material height 120 mm Max material width 700 mm 22 kW motor Two floating saws Hydraulic roller feed, steplessly adjustable Kodpfoxciypex Aanjnf

Condition: excellent (used), Storti RM 500 edger - Italian production Knodpsk Talpsfx Aanof - year of production 1993 - electric spacing of discs TECHNICAL PARAMETERS: - cutting width max 435 mm - cutting height max 170 mm - engine power 2 x 22kW - max element width 600 mm - minimum material length 800 mm - max disc diameter 600 mm - spindle diameter 40 mm - two upper pulling rollers - one upper pressure roller - roller motor power 2 x 1.1 kW - roller pressure with automatic jump - seven bottom pulling toothed rollers - electric disc adjustment - two lasers - feed speed 25 and 50 m/min - feeding table 2950 mm - receiving table 3000 mm - drive rollers D100 mm - power of the roller feed motor 2 x 1.5 kW Transport dimensions 500x240x180 cm weight 3500 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, ### Weinig Dimter OptiCut 350 – Optimizing cross-cut saw The Weinig Dimter OptiCut 350 is a high-performance Optimizing cross-cut saw widely used in the woodworking industry for precise cut-to-size operations with simultaneous material optimization. This machine ensures high-speed, accurate cutting, maximizing raw material efficiency while minimizing waste. Year of manufacture: 2005 Technical condition: Very good --- Technical Specifications: 1. Input material length: - Maximum length: 6,200 mm - Minimum length: 500 mm 2. Material width: - Maximum width: 300 mm - Minimum width: 40 mm 3. Material thickness: - Maximum thickness: 100 mm - Minimum thickness: 15 mm 4. Cutting speed: - Maximum cutting speed: 250-350 cuts per minute - Feed speed: up to 200 m/min 5. Cutting tool: - Saw blade rotational speed: approx. 3,000 RPM 6. Control system: - CNC control with an advanced PLC system for precise cutting process management. - Optimization data input to maximize material utilization and minimize waste. - Touchscreen interface for easy machine operation and parameter input. 7. Optimization system: - Equipped with a defect recognition system (manual or automatic defect marking) to eliminate defective sections during cutting. - Length optimization function based on production requirements (e.g., minimizing waste, maximizing output of specific lengths). 8. Material feeding system: - Automatic feeding system for seamless material input. - Integrated conveyors and transport systems for efficient material flow through the machine. 9. Waste management: - Automated waste removal and sorting system to separate defective wood fragments. - Number of ejectors: 9 unit 10. Cutting accuracy: - High precision cutting with an accuracy of ± 0.5 mm, depending on wood parameters and machine settings. Kedjv Dm U Rspfx Aanjnf 11. Power supply: - Standard power supply: 400 V, 50 Hz --- ### Additional Features: - Automatic defect marking: The operator can mark defects on the wood (e.g., knots, cracks), and the machine automatically optimizes the cutting process to avoid these sections. - Safety features: Equipped with modern safety systems, including lock sensors and protective covers. --- Applications: The Weinig Dimter OptiCut 350 is ideal for woodworking industries, especially in facilities producing structural wooden components, furniture parts, and solid wood processing plants. Thanks to its optimization capabilities, this machine significantly increases productivity and efficiency while reducing material waste.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3500x1950x1500 mm Weight 2500 kg Kedpfx Aevz Eh Rsanenf Total power requirement 58,5 kw

Year of construction: 1990, condition: excellent (used), A KT-53 Board Edger that is rebuilt to a KT-52 Knodjhuiwuspfx Aanef

Condition: good (used), Edger line / automatic edger / double edger with automatic measurement and adjustment EWD Esterer Type: DK90 TL 1000 Year of construction: 1994 Maximum passage width: 1000 mm Maximum cutting height: 120 mm 2-stile variable Measurement Combimes with S-conveyor with cross-cut saw with Esterer ARS TR infeed Knsdpevg Ecfjfx Aanof with 2-lamellar splinter separator new saw shaft, new bearings and new chains 3 years ago. Incl: External infeed for boards to DK90 with tilt destacking with cross conveyor

Condition: good (used), cutting height 120 mm main engine 11 kW smooth feed speed regulation Kodowm Swnjpfx Aanenf two-disc

Condition: excellent (used), Edging line edger with optimization PAUL AB920 - in a warehouse - German production - DTR - optimization of the cutting width - cross cut saw - automatic disc spacing TECHNICAL PARAMETERS: Knsdpfx Ajia Nypsanof - max. workpiece width 920 mm - max. workpiece height 90 mm - max. workpiece length 6000 mm - main engine power 37 kW - disc diameter max. 300 mm - spindle diameter 60 mm - sleeve diameter 70 mm - fixed sleeve 60 mm long - floating sleeve for 1 disc - floating sleeve with a spindle 100 mm long - number of measuring heads 15 - spacing of measuring heads 350 mm - distance between the measuring heads - total feeder power 10 kW - cross-cut saw for cutting the material to a length of 2630 mm - saw leveling the material - cascade for transporting the board - hydraulic feed with smooth speed regulation - hydraulic material pressure - hydraulic material height adjustment

Condition: used, Dimensions (mm³): 670x80x100 Weight: 4,7 kg Image acquisition time: 100 msec. Measuring field size: 220x300 mm² Data interface: GigE Ksdpfx Ask E Nadsansnf Resolution CCD camera: 1200x1600 px 3d error resolution limit (depth): 100 µm (min.) surface dependent Lateral error resolution: 1.5 mm surface dependent Working distance: 432 mm +/- 20 mm Light source: BLUE-LED

Condition: excellent (used), Year of construction: 2022, TECHNICAL PARAMETERS: Knedpfxjwp Az Ae Aanjf - cutting width 250 mm - cutting height 120 mm - Capacity up to 8,150 mb /8 h - sorting table with 4 punches - Electronics Controller with color touch screen "MITSHUBISHI" - Functions - full optimization of 30 dimensions in two quality classes, - creating cutting programs for different customers, - cutting at the place marked with a fluorescent pencil, - cutting the margin (beginning and end of the input material) - cutting in packages (several elements at once) - meter counters, total, shift, operator, monthly, - cutting accuracy ±0.2 mm - 5.5 KW motor (saw Ø500 – 140z) - Input material width 12 - 250 mm max. width/height (250 / 50 mm) - Material height input 12 - 120 mm max. height/width (120 / 130 mm) - Input material length up to 4,200 mm - Lubrication Oil central lubrication system - Output automation Connection for inclined conveyor and sorting table

Condition: used, Year of construction: 1994, Automatic edger / double edger with automatic measurement and adjustment EWD Esterer Type: DK90 TL 1000 Year of manufacture: 1994 Maximum throughput width: 1000 mm Maximum cutting height: 120 mm 2-rail variable Combi measurement with S-conveyor with cross-cut saw with Esterer ARS TR infeed with 2-blade chip separator New saw shaft, new bearings, and new chains 3 years ago. Has already been dismantled and is ready for loading at any time. Location: Austria, near Leoben Knedpfjwdux Aex Aansf

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Metal Technika OWD 1600 Optimizer - manufactured in Poland - year of production 2017 TECHNICAL PARAMETERS: - cutting width 250 mm - cutting height 120 mm - Capacity from 3 200 to 8 150 mb /8 h - sorting table with 5 knockouts - Electronics Controller with color touch screen display "MITSHUBISHI" - Features - full optimization of 30 dimensions in two quality classes, Kjdsrx Rxpopfx Aanonf - creation of cutting programs for different customers, - cutting at the point of marking with fluorescent crayon, - margin cutting (beginning and end of the input material) - cutting in packages (several elements at once) - meters, total, shift, operator, monthly counters, - cutting accuracy ±0.2 mm - Motor 5.5 KW (saw Ø500 - 140z) - Width of input mat 12 - 250 mm max. width / height ( 250 / 50 mm) - Height of input mat 12 - 120 mm max. h/w ( 120 / 130 mm) - Input mat length up to 4,200 mm - Lubrication Oil central lubrication system - Automation at the output Connection for slant conveyor and sorting table

Condition: excellent (used), TECNI-ARMENTIA CH-70 edger - hydraulic control - the possibility of programming the width - saving up to 12 programs - centering table TECHNICAL PARAMETERS: cutting width max. 700 mm cutting height max. 130 mm main engine power 55 kW material width max. 830 mm length of the fixed sleeve 300 mm length of the movable sleeve 100 mm min. material length 700 mm spindle diameter 65 mm sleeve diameter 85 mm disc diameter 350 - 400 mm hydraulically smoothly adjustable feed Kjdpfoidmptex Aanonf feed speed up to 38 m / min feeding table 2700 mm roll width 700 mm roll diameter 140 mm centering feeding table two lasers pump motor power 4 kW row of anti-recoil pawls three upper pulling rollers three lower pull rollers hydraulic pressure hydraulic height adjustment dimensions (length / width / height) 480/200/230 cm weight 4000 kg

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields Kedpfxjma Dkfs Aanenf TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg

Condition: used, Year of construction: 1992, functionality: fully functional, cutting height (max.): 160 mm, saw blade diameter: 500 mm, total length: 7,600 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, extraction connection diameter: 160 mm, feed length X-axis: 6,000 mm, working height: 160 mm, – year of production 1992 – smooth cutting speed adjustment TECHNICAL PARAMETERS: – cutting length: 6000 mm – max. cutting width: 580 mm – max. cutting height: 160 mm – main engine: 11 kW – max. blade diameter: 500 mm – unit travel speed adjustment – linear laser – quick blade return – power supply: 400V – nozzle diameter: 160 mm – work table dimensions: 1110 x 7300 mm – pawl – hydraulic pump: 4 kW – machine dimensions (length / width / height): 760 / 160 / 210 cm – weight: ~ 1500 kg Kjdpjvntdmsfx Aanenf