Frequency converter 220 V 200 Hz 6.5 kW

OTT HC132

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm Podpjt Hal Djfx Abhopu PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: used, Altendorf F45 panel saw 320 cm carriage, blade tilt and height adjustment via hydraulic system, Ppjdpfx Aboy T Eutehju rip fence on the right side, manually adjustable up to 1350 mm, scoring saw, 0.75 kW, 5.5 kW motor, max. blade diameter 450 mm.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4000x2900x2100 mm Weight 2500 kg Pedsv A Hbhepfx Abhepu Total power requirement 20 kw

Condition: excellent (used), Year of construction: 2013, operating hours: 1,395 h, Calibration and finishing machine, wide-belt sanding machine Kundig Brilliant with electronic segment sanding pad, adjustable sanding head and finish sanding. A video of the machine in operation can be sent upon request. Ideal sanding machine for interior design companies, also suitable for intermediate sanding of painted surfaces. Edge banding machine with combination unit and electronic segmented pressure beam. Edge segments can be switched on and off. Segment width of the pressure beam 22mm (ideal for intermediate sanding of painted surfaces). Pneumatically adjustable calibration roller, grooved, rubberized roller with grit adjustment. Drive motor 11kW Infinitely variable belt speed 3 - 15 m/s via frequency inverter. Belt feed infinitely adjustable from approx. 3 to 15 m/min. Belt blowing device workpiece-controlled. Constant table height approx. 950mm by adjusting the upper part of the machine, thus also integrable into sanding lines. Feed belt still has good grip and is in very good condition. Carpet with adjustable vacuum blower, thus even small parts can be held securely. Maximum sanding width approx. 1100mm Workpiece height approx. 3.5 to 200mm Sanding belt dimensions 1120 x 2000mm Infeed roller table and outfeed roller table Hood locking Dust extraction connection 1 x 180mm, 1 x 125mm Terminal control with 45 programmable sanding programs for automatic machine control. Parameters: belt speed, feed speed, workpiece height, belt blowing nozzle, vacuum blower, adjustment of the calibration roller and the parameters of the segment sanding pad. Thickness measuring system with adjustable chip removal and Enormatic with automatic thickness adjustment with feed triggering, thus eliminating the need for constant re-measurement with the caliper. Programs for different sanding tasks can be stored and selected via smartselect. CE marking Operating manual 2 sanding inserts available The four bellows have been renewed without the illustrated connection cable Original paint, only a few spots retouched Very good condition from a small company Machine has approx. 1395 operating hours, i.e. approx. 2 hours per week. Dimensions approx. 1900 x 1650 x 2150mm (L x W x H). Weight approx. 2300kg. With a large, mobile storage table at the height of the belt, for storing the sanding belts. Table size approx. 1520 x 1360 x 950mm Including various sanding belts from K80 to K400 Ppedpfeyxg N Nex Abheu The machine can be demonstrated on site upon request after prior arrangement. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: like new (used), functionality: fully functional, power: 11 kW (14.96 HP), cutting height (max.): 115 mm, cutting width (max.): 4,200 mm, height adjustment type: electric, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, saw blade guard, scorer, SCHEER PA 7012PK – 4200 x 4200 mm Like-new, high-performance panel dividing system with postforming unit, head cutting saws, and vacuum loading system. LIKE NEW - FROM THE MANUFACTURER - 1 year warranty For sale is a powerful and extensively equipped SCHEER PA 7012PK panel dividing system with a cutting capacity of 4200 x 4200 mm. The system has been professionally overhauled and is ideally suited for industrial furniture and interior design companies with high demands for precision, performance and automation. Technical data Cutting length: 4,200 mm Cutting height: 115 mm Saw blade overhang: 135 mm Main saw motor: 11 kW Scoring saw motor: 2.2 kW Automatic cutting height adjustment Residual cuts up to 5 mm possible Hardened guides Automatic forward and backward movement of the saw unit Main and scoring saws with integrated extraction Fully automatic angle pressing device Material feed HP 5107-4200 Servo-driven material pusher Feed speed up to 25 m/min Return speed up to 50 m/min 7 retractable clamping fingers Closed Pertinax surface in the stop area Air cushion system instead of rollers Control & Software with integrated industrial PC. Highlights: SSD hard drive Linux operating system Network-enabled (LAN/WLAN) Remote maintenance via TeamViewer / Remote Desktop Graphical cutting plan display Multilingual user interface 17" flat-screen monitor in swiveling control panel Virtually unlimited cutting plan management Optimization software OPTIMIN The integrated cutting plan optimization enables the direct creation and calculation of optimized cutting plans on the machine. Bills of materials are entered and automatically converted into economical cutting layouts. Postforming unit Integrated postforming unit Material height up to 80 mm Lift table TE 5085-4200 Four-spindle lift table Can be loaded from three sides Table size: 4,200 x 2,200 mm Stack height up to 650 mm Motor-driven roller conveyors on the right and left Fully automatic alignment systems Longitudinal alignment WP 5035-4200 Automatic positioning Working area 2,000 – 4,200 mm Psdjza Eazjpfx Abhopu Transverse alignment WP 5034-4200 Three alignment fingers Working area 1,200 – 2,200 mm Front tables Angle stop table HP 5094-2406 3 workpiece support tables HP 5095-2406 Pertinax supports Air cushion system LK 5162 for all front tables Head cutting saws Main head cutting saw KS 5000-4200 Fully automatic positioning Adjustment range 300 – 2,100 mm Extended travel up to 3,100 mm Power 7.5 kW Integrated top and bottom extraction Additional head cutting saw Manually adjustable Positioning 0 – 50 mm from the stop edge Power 7.5 kW Vacuum loading system TE 5088-4200 Additional pusher with integrated short-stroke vacuum loading system. The panels are automatically transferred from the lift table to the pre-stacking table and fed into the processing process. This enables short cycle times and a high degree of automation. Conclusion An extremely rare and fully equipped industrial panel dividing system with extensive automation, postforming equipment, double head cutting system and vacuum loading. Ideal for the furniture industry, shop fitting, interior design, as well as larger carpentry and joinery businesses. Machine available immediately – 1 year warranty.

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-341-07-8150, functionality: fully functional, cutting width (max.): 3,800 mm, saw blade diameter: 380 mm, cutting length (max.): 4,300 mm, throat depth: 75 mm, Equipment: scorer, TECHNICAL DETAILS Blade extension: 75 mm Cutting length: 4,300 mm Cutting width: 3,800 mm Main saw blade, max. diameter: 380 mm Main saw blade, power: 9.2 kW Scoring saw blade, max. diameter: 180 mm Scoring saw blade, power: 2.2 kW Pusher carriage speed: up to 80 m/min Saw carriage speed: 1–120 m/min MACHINE DETAILS Numerical control: POWER CONTROL Software: Cad Matic 4.0 Electrical Data Voltage: 400 V Current: 31 A Frequency: 50 Hz Secondary current: 40 A Control voltage: 24 V DC Ppsdpoxx Svrefx Abheu EQUIPMENT Front panel loading Front-side unloading Automatic side aligner Fixed front table made of Bakelite with air cushion system 3 mobile front tables made of Bakelite with air cushion system Pusher carriage with 6 clamps