Used Overbelt for sale (64)

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Cpsdpev Sqrpjfx Afpju Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: new, Year of construction: 2026, Delivery time approx. 3-4 months MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slider Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (dry) must be below 30% Codpfxed Dgw Us Afpspu - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: as good as new (ex-display), Year of construction: 2025, showroom machine machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) Cjdedv Eu Hepfx Afpopu - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: like new (used), Year of construction: 2024, operating hours: 29 h, *one machine is ready for delivery and ready produced Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette sellers. Classic type - throughput up to 425 kg / h * depending on the material Options for an extra charge: Plant construction / mütek system technology: Cpsdofhql Tspfx Afpeu - mütek shredder MRZ shredding technology - conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary valve - screw conveyors - silos - Control links of all kinds - semi-automatic packaging technology Press: - Packing table with drawer - Top-mounted silo with discharge Your advantages: Most important point: + Very established, well-engineered die press thanks to 25 years of experience. The difficulty and the know-how lies in the detail. For example, valves and cylinder seals of the highest quality. + 24h operation possible + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics Technical data briquetting press: Throughput: up to 425 kg / h * * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material. If no test material is made available to us, we cannot make any statements about the briquette quality and throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Main hydraulic compressor Pressing pressure: up to approx. 1700 kg / cm² Hydraulic system with 260 liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 ph Manual operation of all cylinders "Dustproof" switch cabinet with PLC control and touch display Total power consumption of the briquette press: approx. 33 KW Muxzr8 Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% - Maximum chip length: 20 x 2 x 2 mm - temperature where machine is placed + 8 degrees - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear.

Condition: as good as new (ex-display), Year of construction: 2023, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (15 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment base + € 3,750 net (prevents blocking of the pusher. Recommended for shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) +1,980 € net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) Bea9ia3l27 Requirements for the raw material: Cjdpfx Afogmfa Aopopu - Mineral impurities such as sand, stones, etc. lead to increased wear. We are happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: new, Year of construction: 2025, functionality: fully functional, rotor diameter: 360 mm, power: 45 kW (61.18 HP), Material shredder 45KW Hopper opening: 1,030 x 1,235mm Rotor diameter 360mm Star-delta start, automatic stop at idle speed - Hydraulic pusher equipped with pressure plates Cedpfx Afot Rivtspspu - Siemens SPS control system - Optional with control cabinet extension for discharge conveyor + overbelt magnetic separator Complete solution with discharge conveyor belt in any design. Our core competence lies in supplying the customer with exactly what he really needs. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by phone to find a suitable solution for your application. conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grid, magnetic grate, metal separator, block magnet, filter systems

Condition: ready for operation (used), Year of construction: 2021, operating hours: 506 h, functionality: fully functional, machine/vehicle number: 42, conveyor belt length: 6,900 mm, conveyor belt speed: 4,000 mm/s, conveyor belt width: 1,000 mm, Doppstadt Methor with only approx. 500 operating hours and extensive additional equipment! TECHNICAL DETAILS Shredding System Type: Size L Number of roller teeth: 8 Feed Hopper Loading height: 3,124 mm Rear Discharge Conveyor Width: 1,000 mm Length: 6,900 mm Discharge height: 4,184 mm Conveyor speed: 1 – 4 m/s MACHINE DETAILS Chassis: Crawler track undercarriage Working position (L x W x H): 11,293 x 2,545 x 4,184 mm Transport dimensions (L x W x H): 7,820 x 2,545 x 3,231 mm Cjdpfjxrn Hgsx Afpepu Engine type: Diesel-hydraulic Make: Caterpillar C7.1 Rated power: 205 kW (278 HP) Emission standard: Stage V Fuel tank capacity: 300 l EQUIPMENT Methor basic package with crawler undercarriage Crawler undercarriage incl. 2 travel speeds Track width 400 mm, 3-bar Additional hydraulic connection 70 l/min 24 V electronic control system Large complete radio remote control Service-friendly engine compartment with LED light Folding hopper with travel sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Frame for overbelt magnet Overbelt magnet Quick-change roller system on the roller Quick-change roller system on the machine Additional E-pump for operation when engine is shut down

Condition: good (used), Essentially consisting of: Feed hopper (15 cbm) with push cart Cpodpfx Afot Uzv Hspju Double-deck screening plant with feed chutes and undersize grain discharge belt Various conveyor and stockpiling belts Overbelt magnet Electrical installation with control cabinet

Condition: ready for operation (used), Year of construction: 2021, operating hours: 506 h, functionality: fully functional, machine/vehicle number: 42, conveyor belt length: 6,900 mm, conveyor belt speed: 4,000 mm/s, conveyor belt width: 1,000 mm, Doppstadt Methor with only approx. 500 operating hours and extensive additional equipment! TECHNICAL DETAILS Shredding System Type: Size L Number of roller teeth: 8 Feed Hopper Loading height: 3,124 mm Rear Discharge Conveyor Width: 1,000 mm Length: 6,900 mm Discharge height: 4,184 mm Conveyor speed: 1 – 4 m/s MACHINE DETAILS Chassis: Crawler track undercarriage Working position (L x W x H): 11,293 x 2,545 x 4,184 mm Transport dimensions (L x W x H): 7,820 x 2,545 x 3,231 mm Engine type: Diesel-hydraulic Make: Caterpillar C7.1 Rated power: 205 kW (278 HP) Emission standard: Stage V Cpjdjxdwiuspfx Afpsu Fuel tank capacity: 300 l EQUIPMENT Methor basic package with crawler undercarriage Crawler undercarriage incl. 2 travel speeds Track width 400 mm, 3-bar Additional hydraulic connection 70 l/min 24 V electronic control system Large complete radio remote control Service-friendly engine compartment with LED light Folding hopper with travel sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Frame for overbelt magnet Overbelt magnet Quick-change roller system on the roller Quick-change roller system on the machine Additional E-pump for operation when engine is shut down

Condition: excellent (used), Year of construction: 2025, operating hours: 500 h, Eggersmann “Teuton Z 50” Mobile Single-Shaft Shredder Year of manufacture: 2025 Operating hours: 500–1000 Extended warranty available Engine: Diesel, 6-cylinder Output HP/kW: 500/373 Shredding shaft length x diameter Ø: 3,000 mm x 1,050 mm Rotor speed (rpm): 20–40 Bolted tools Tool-free cutting gap adjustment in six steps Extra-large feed area, 5 m wide Rear discharge conveyor Reversing rotor Operating position: Length (mm): 15,864 Width (mm): 2,540 Loading edge (mm): 3,000 Discharge height (mm): 5,000 Transport dimensions Length (mm): 8,976 Width (mm): 2,540 Height (mm): 3,652 Weight (kg): 25,000 VARIOUS OPTIONS AVAILABLE ON REQUEST Screen basket systems: Strip and honeycomb screen baskets in various versions Rotor tools: Multigrip – Unigrip – Twincut – Rootgrip Overbelt magnet: Extra-strong neodymium version, hydraulically height-adjustable, material discharge on both sides possible Ecospray moisture system and much more… Cpjdpfx Ajxqxbxofpeu

Condition: as good as new (ex-display), Year of construction: 2025, Complete solution for transporting bulk goods such as shredded goods, wood chips, wood pellets, granulate, etc. Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 5,000mm (customizable) Angle in the bend 35,40 or 45° Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 500mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x25mm T-50 lugs - 400mm pitch 2-layer particularly laterally stable Fixed overbelt magnetic separator: Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW Cpedpoi Igdfjfx Afpsu We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: new, Year of construction: 2025, Overbelt magnetic separator, magnetic tape, overbelt magnet, magnet separator, metal detection, demetallization plant Our all-round talent - overbelt magnetic separator is for sale Permanent overbelt magnetic separator TYPE PEM1200 1200x550x200mm ===== 4x ring screw for suspension PU conveyor belt endless GB30 black matt Magnet dimensions: 700x230x120mm 7 x T20 studs high-frequency welded High-quality triple aluminum construction Inner bearing lubrication for 10,000 operating hours. Degree of protection: IP-55 0.18 KW three-phase gear motor GEMOTEG Cpodjhupkmopfx Afpsu 2 pcs. side protection plates V4A Magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Underbody tightly closed and sealed with stainless steel plate and pole pieces.

Condition: excellent (used), Year of construction: 2021, operating hours: 5,000 h, functionality: fully functional, Doppstadt Inventhor Type 6 - tracked undercarriage Cedpewhawrefx Afpepu - 260kW MTU diesel engine - Size ‘L’ shredding system - Overbelt magnet - Central lubrication Expertise test from the manufacturer is available

Year of construction: 2022, condition: new, machine/vehicle number: 201811209, Rising conveyor belt / angle conveyor belt, articulated conveyor belt incl. magnetic separator overband magnetic separator magnetic tape Rising conveyor belt + overbelt magnetic separator Complete solution for wood chip producers Aluminum angled conveyor belt with substructure including adjustable feet and machine feet for levelling horizontal range: 3,000mm Rising range: 2,000mm Angle in the bend area: 45° Total conveyor length: 4,400mm Discharge height: 1,600mm Height of horizontal: 200mm Conveyor belt width 500mm Drive roller + deflection roller S235 steel welded and machined Aluminum deflection roller stored in the kink and crowned overturned PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Drive: motor 1.1KW, GEMOTEG speed 0.3m/sec Connection 230/400V, 50Hz protection class IP54 Drive etc. ready for connection, motor 2 pcs. corrugated edges 40x35mm T40 studs, pitch 400mm 2-layer particularly laterally stable Usable width 190mm, results as follows: Cpsdsdrdyyspfx Afpeu Transverse arrangement -70+35-190+35-70mm

Year of construction: 2021, condition: new, Aluminum angled conveyor belt including mobile substructure horizontal area 1500mm (adjustable) Rising range 2500mm (customizable) Freely selectable angle in the bend: 30, 35, 40 or 45 ° Polyamide swivel castors with locking brakes Conveyor belt width 400mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm (customizable) T-20 studs - 400mm pitch (customizable) 2-ply particularly cross-stable Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Cjdpfxehh A Uqs Afpspu Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: new, Year of construction: 2024, Permanent overbelt magnetic separator TYPE DMPM1000 1.600 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnetabmessungen: 1.000x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with tension bearings. Drive: GEMOTEG shaft-mounted geared motor 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz Protection class IP54 Drive ready for connection up to motor terminal box Cjdpfx Aetxn Ewefpjpu (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 8 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply especially transversely stable * equipped with stainless alligator connectors RS125 Magnetic properties: Built-in magnetic core: Strontium ferrite Y30 Bonded SfRe strontium hard ferrite magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole pieces tightly closed and sealed. conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying customers with exactly what they really need. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by telephone to find a suitable solution for your application.

Condition: new, Year of construction: 2024, machine/vehicle number: 20244051202, Aluminum angle conveyor belt with substructure including adjustable feet and machine feet to level unevenness horizontal area: 1,500mm rising area: 2,100mm angle of inclination at bend 45° discharge height: 1,700mm aluminum construction - double profile reinforced 90x45mm drive: slip-on gear motor 0.55KW, speed 0.3m/sec connection 230/400V, 50Hz protection class IP54 PU conveyor belt including corrugated edges & cleats conveyor belt width: 600mm 2 corrugated edges 50 high, 25mm wide, 24 T-40 cleats belt material: 2-ply, particularly stable across the belt permanent overbelt magnetic separator TYPE PEM1200 1200 x 550 x 200mm 4x eyebolt for suspension Drive: slip-on gear motor GEMOTEG 0.18KW, speed 0.4m/sec Connection 400V, 50Hz protection class IP54 PU conveyor belt endless 7 x T20 studs high frequency welded Magnet dimensions: 700x230x120mm Our core competence lies in providing the customer with exactly what they really need. We work with our customers to develop customer-specific, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overband magnet, magnetic belt separator Cpsdpfxsg At Hbs Afpsu

Year of construction: 2021, condition: new, Complete solution for the transport of bulk materials and demetalization of magnetic metal contaminants. Aluminum angled conveyor belt including substructure horizontal area 2000mm (adjustable) Rising range 4500mm (customizable) Freely selectable angle in the bend: 30, 35, 40 or 45 ° Cpjdehh Ay Sopfx Afpsu Construction: height adjustable Construction for suspending the overband magnetic separator DMPM1200 included Conveyor belt width 400mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm T-20 studs - 400mm pitch 2-ply particularly cross-stable Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Year of construction: 2021, condition: new, Aluminium ascending conveyor belt incl. substructure rising range starting from 50mm (adjustable) discharge range 1500mm (adjustable) conveyor belt width 500mm (adjustable) We supply our conveyor belts in PVC, PU or rubber. PVC- conveyor belt incl. driver and corrugated edge Drive: Motor 0,25KW ( adjustable ), speed 0,3m/sec Connection 220/240V, 50Hz protection class IP54 drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Shaft edge: 40x35mm (adjustable) T-20 cleats - 400mm pitch (adjustable) 2-ply especially cross-stable Cpjdpfx Ashh Dbasfpeu Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply the corresponding equipment from our own production. B2hd9kmmdn Please contact us by phone to find a suitable solution for your application. conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Year of construction: 2023, condition: new, Aluminum angle conveyor belt with substructure including adjustable feet and machine feet to level unevenness Cpodpfx Afsht Uzajpju horizontal area: 3,750mm rising area: 3,200mm angle of inclination at the bend 45° total conveyor belt length measured on the ground: 6,000mm discharge height: 2,500mm horizontal height: 250mm design: aluminum construction - double profile reinforced 90x45mm drive roller + deflection roller S235 steel welded and machined Ø100x520mm crowned, shaft fixed with clamping bearings. Drive: slip-on gear motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz protection class IP54 Drive ready for connection to motor terminal box (commissioning must be carried out by a qualified electrician) PVC conveyor belt DM 10/2 0+005 PVC including corrugated edges PVC green Conveyor belt width: 500mm 2 corrugated edges 40 high, 35mm wide, high frequency welded 46 T-40 studs, approx. 300mm pitch Belt material: 2-ply, particularly stable across the belt In the bend area, the belt is guided on both sides with 3 hold-down rollers each. The belt is designed with a 70mm edge-free zone on both sides. Due to the corrugated edge on both sides, the usable width of the conveyor belt is reduced: Usable width: 290mm, results as follows: (top view) transverse arrangement 70+35+290+35+70mm Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Year of construction: 2022, condition: new, Aluminum angled conveyor belt with substructure Cpjdpfxoht U Tdo Afpsu Conveyor length: 1000mm flat + 2400mm rising Pitch angle in bend 45°C Discharge height: approx. 2000mm Height of the horizontal top edge 300mm PPU conveyor belt FDA Food compliant Conveyor belt EM 15/2 0+17 PU blue 7 white Belt width 400mm T20 studs welded - pitch 202mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 30mm sidewall high frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement -70/+35/-5/+190/-5/+30/-70mm Full-surface underlay sheet Drive: Motor approx. 0.25KW Belt speed approx. 0.3m/sec Connection 220/400V, 50Hz protection class IP54 Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grid, magnetic grid, metal separator, block magnet, filter systems

Year of construction: 2023, condition: new, Overband plate magnet with cleaning mechanism Execution in VA 1.4301 tightly welded incl. drawer for cleaning Dimensions: 800x500x180mm 4 - piece M16 eyebolts on the back Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Overband plate magnet Execution in VA 1.4301 tightly welded Cpedpok S Dzajfx Afpju incl. drawer for cleaning 420x420x180mm 600x500x180mm 800x500x180mm 1000x500x180mm 1200x500x180mm Completely welded stainless steel housing to protect the magnetic core Ring eyelets for hanging Cleaning drawer for easy removal of accumulated impurities. Installation above all conveyor systems possible...

Year of construction: 2023, condition: new, Complete solution for transporting bulk goods such as shredded goods, wood chips, wood pellets, granulate, etc. Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 4,500mm (customizable) Angle in the bend 35,40 or 45° Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Cpjdpfxok S D Nle Afpsu Conveyor belt width 800mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x25mm T-50 lugs - 400mm pitch 2-layer particularly laterally stable Fixed overbelt magnetic separator: Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW We always have various systems of this type in stock. The delivery time for an individual system is currently around 3-4 weeks, depending on the production effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Year of construction: 2022, condition: new, machine/vehicle number: 2022022209, Aluminum angled conveyor belt with substructure Conveyor length: 1500mm flat + 4000mm rising Pitch angle in bend 45°C Discharge height: approx. 3000mm Height of the horizontal top edge 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 400mm T30 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+180-5+35+70 Full-surface underlay sheet Drive: Motor approx. 0.25KW Belt speed approx. 0.4m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54 Cjdpfoh Elhzsx Afpjpu Incl. construction for hanging the overbelt magnetic separator in the horizontal.

Year of construction: 2021, condition: new, Complete solution for the transport of bulk materials and demetalization of magnetic metal contaminants. Aluminum ascending conveyor belt including substructure Incline start area level ground (adjustable) Discharge height 1800mm (adjustable) Csdpfohh A Iyex Afpepu Construction: height adjustable Construction for suspending the overband magnetic separator DMPM1200 included Conveyor belt width 500mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm T-20 studs - 400mm pitch 2-ply particularly cross-stable Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separators, overbelt magnetic separators, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnets, magnetic belt separators, lifting magnets, filter rods, magnetic grids, magnetic grids, metal separators, block magnets, filter systems