Used Padding Press for sale (13,194)

Condition: used, Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 500 mm Shut height (stroke down, adjustment up): 1350 mm Free frontal opening L-R: 3550 mm Table surface area : 3500 x 2000 mm Slide area: 3500 x 2000 mm Die cushion capacity in table: 150 ton Die cushion stroke: 200 mm Die cushion pad area: 2700 x 1500 mm Number of strokes: 7 - 21 s.p.m. Ejector in ram: 60 ton Ejector stroke in ram: 150 mm Required power: kW Height over floor approx.: 8600 mm Weight of machine approx.: 250 ton Standard configuration Lodpfx Aksz Hi Rgjmjru LINK DRIVE

Condition: good (used), Year of construction: 2005, stroke length: 1,000 mm, throat depth: 400 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, overall weight: 9,650 kg, total length: 5,700 mm, total width: 1,800 mm, total height: 3,100 mm, power: 7.5 kW (10.20 HP), pressing force: 120 t, clearance between the columns: 2,550 mm, Equipment: documentation/manual, Press brake SAFAN - H-Brake 120TS1 Lredpfx Aez Hka Aekmsu MACH-ID 9820 Make: SAFAN Type: H-Brake 120TS1 Control: TS1 YOP: 2005 Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X/ Z1 / Z2 / R-Central Control: TS1 Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal and manual buttons. Sturdy construction on a pedestal. The drill table is adjustable in all planes. This is one of the newest Citoborma models. Ljdpfx Aksz Dtaaomsru Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: like new (used), Heidelberg GTOZ-S52 offset printing machine The machine is ready to work, very good condition, purchased from small printing house. Technical data: Format: 36x52cm 2 printing units Weight: 3000kg Lredpfez E A I Aex Akmou Power supply: 400V Year of production: 1994 Baldwin alcohol dampening Control panel Documentation and additional elements included.

Condition: good (used), Year of construction: 1964, Pressing force: 5 t Stroke adjustable: 8 - 50 mm Ram adjustability: 25 mm Weight: approx. 500 kg Lredpfx Aksy D Abfemeu Accessories / Special features: • Adjustable table • Foot release Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2016, Waste disposal system consisting of: 1 Clean air dust collector with briquetting press JP 350-L 1 Clean air dust collector with rotary valve airlock JZ 350-L Year of manufacture: 2016 Technical data JP 350-L: Suction nozzle: 350 mm Nominal volume flow: 6580 m³/h Maximum volume flow: 8000 m³/h Negative pressure at nominal volume flow: 2750 Pa Motor power: 11 kW Rated speed: 3000 rpm Technical data briquetting press CS3-12: Throughput capacity max. 50 kg/h or 0.75 m³/h (material-dependent) Motor, hydraulic pump: 3.0 kW Motor, agitator: 0.37 kW Motor, dosing screw: 0.75 kW External fuse: 16A Briquet diameter: 65 mm Weight: 780 kg Storage container: 1200 x 1200 mm Overall external dimensions: 3150 x 1625 x 2742 mm Space required: 4500 x 3000 x 2900 mm Availability: approximately 11/2027 Location: Hesse Ljdsz Rrbdopfx Akmjru

Condition: good (used), functionality: fully functional, Year of construction: 2015, bending force (max.): 230 t, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Lredpfxez Rl Nhe Akmou Standard equipment: Machine - Robust machine frame in all-steel construction - Press beam, stress-relieved by annealing - Spherical mounting of the press beam with inclination - Electro-hydraulic upper drive with 4-cylinder technology - Generous bending clearance - Flat front covers - Modern block hydraulics - Electronic pressure gauge - Measuring system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Back gauge system - Rear back gauge system, 2 axes, X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool holder, manual clamping, hardened - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - Manual crowning Control system - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15-inch touch screen - Network capable - Teleservice via modem Operation - Control panel with LCD keypad and foot switch - Communication bus Safety - Standard safety devices

Condition: excellent (used), Year of construction: 2008, stroke length: 4,000 mm, throat depth: 400 mm, operating speed: 14 mm/s, reverse speed: 130 mm/s, overall weight: 23,000 kg, total length: 5,800 mm, total width: 2,300 mm, total height: 3,800 mm, power: 42 kW (57.10 HP), pressing force: 320 t, clearance between the columns: 3,150 mm, Make: LVD Type: PPEB-EFL 320/40 Control: CADMAN YOP: 2008 CNC Crowning Hydraulic tool clamping EFL Easy form laser measuring & correction system Set Tooling  Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between column: 3150mm Max. pressing force: 320T Dis. Beam - Table: 570mm Beam stroke: 300mm Table Width: 200mm Troth beam: 400mm Approch speed: 120mm/min. Working speed: 14mm/min. Return speed: 130mm/min. Adjustment X-Axis back gauge:1000mm Control: CADMAN Power: 42kW Lrodpjz Rmp Njfx Akmju Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 94,201 h, control type: CNC control, bending force (max.): 400 t, installation height: 595 mm, Bending length [mm] 3550 Pressing force [tons] 400 Control system Cybelec ModEva 10s Lrsdpfxoz Rmcvo Akmju Standard equipment: - Sturdy machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics - CNC rear stop for X and R axes, safe displacement of the stop fingers from the front by means of a safety interlock - Upper tool clamping system "EHT", manual, head width 26mm, load max. 3000 kN/m - Lower tool clamping system EHT, manual, clamping width 90mm for block tools and 13mm for single V-dies, without clamping - Control system: CYBELEC ModEva 10S on Windows, 2D graphic control with a 10.4" color screen - Control cabinet air conditioning + Rear stop - System 1, 5 axes, straight finger, 140mm wide, adjustment of R axis 150mm + EHT quick clamping device, for upper tools, pneumatic, head width 26mm, load max. 3000 kN/m (self-centering horizontally) + EHT lower tool clamping, pneumatic, clamping width 55mm + Hardened insert strip, for EHT lower tool clamping 55mm / 90mm + Lower tool displacement, CNC-controlled, infinitely adjustable via rear stop 1 (max. 4550 mm working length) + Crowning device CNC-controlled, in the table without tool clamping, load max. 3000 kN/m + Safety device LaserSafe (up to max. upper tool height 440mm) + Additional foot switch + Bending aid 1st arm, load max. 1500N with 2 integrated support strips in standard design + Bending aid 2nd arm, load max. 1500N with 2 integrated support strips in standard design + 2 pcs. support strips for a bending aid with T-slot 14mm and scale and ball rollers + 2 pcs. table extension for bending aid + Short park position left + Short park position right

Condition: ready for operation (used), Year of construction: 1999, SM 74-5P2 L, 1999 year Fully rebuild and renewed by heidelberg 2012. All auto washes autoplate Temperating rollers technotrans 198 mil imoressions. Ledpfx Ajyi Uxxekmsru

Condition: ready for operation (used), Year of construction: 1983, BOBST SPO 1600 Max Speed 5000 per hour Year 1983 Max lenght 1075mm Max width 1580mm Fully reconditioned by Bobst 2015 Central line Lsdoxcayyspfx Akmeru

Condition: ready for operation (used), Year of construction: 1989, Heidelberg GTOZP 52 - 696xxx serial - 1989 Lrodpfx Akjx Hrn Tomeu Front panel Alcohol dampening 35 mios Perfector documents + tools

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 417 h, Amada HFE M2 5012 Press Brake (2021) Manufacturer: Amada Type: HFE M2 5012 Press Brake Condition: used, currently in production Year of manufacture: 10/2020 Operating hours: 6830 h Working hours: 417 h (still in use) Pressing force (kN): 500 Press beam length (mm): 1270 Distance between machine uprights (mm): 1035 Stroke (mm): 150 Lrodpjzwppyefx Akmsu Opening width without die holder (mm): 480 Overhang (mm): 100 Working height (mm): 920 Working speed (mm/sec): 15 Approach speed (mm/sec): 185 Opening speed (mm/sec): 185 Dimensions: Length (mm): 2585 Width (mm): 2190 Height (mm): 2420 Weight (kg): 3600

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox iGen 5 Press’ colour production system Items for sale: 1 x Xerox iGen 5 Press with the following specifications: Includes FreeFlow Print Server Includes 2 x YVC-2 paper decks Includes YVC-3 finisher Includes 5th colour (orange) Not the right configuration? It is no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 15,719,744 pages Condition: This offer is for a used machine, which may show signs of wear (minor scratches or yellowing). Ljdpfx Ajy Dfclskmsru The device has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: ready for operation (used), Year of construction: 1995, Printing machines 2 colour offset printing machine KBA Rapida 72K Year 1994 Serial No. 65802317 Lsdpfxeyx Iyvo Akmjru Year 1995 Printing sections 2 Size of paper MAX 520 x 720 mm Size of paper MIN 210 x 297 mm Printing speed 17000 sheets/hour Size of the printing plate 557 x 720 mm Size of the printing blanket 585 x 730 mm Counter 32 mios Current state: In production

Condition: new, Working width 3000 mm Working height 2000 mm Number of cylinders 5 St. S&S Frame Press, Type T 35 – CE Version ----- Working width: 3000 mm Working height: 2000 mm Manufacturer’s Technical Description: Item 1 00001931 S&S FRAME PRESS, Type T 35 Item 2 00003701 Medium-pressure beam with double-acting pressure cylinder, weight compensation, pressure hose, and shut-off valve, up to 2000 mm high Sturdy welded frame construction made of thick-walled special hollow sections; sliding carriage and pressure beam with 50 mm hole spacing. Continuous abutment on the left side for wide-span compaction; lower abutment in 2 levels. Vertical press cylinders mounted on special pressure beams with one-hand quick adjustment and weight compensation, height-adjustable in 50-mm hole spacing. Long sliding carriages ensure the long-term absorption of high pressing forces. Quick, smooth width adjustment via ball-bearing-mounted carriage with central locking, secured in 50-mm hole spacing. Upper horizontal press cylinder is infinitely height-adjustable and equipped with weight compensation. Lower horizontal press cylinder with centering holes for the two abutment levels, without weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm. Electro-hydraulically controlled machine, with 2 vertical pressure cylinders d = 60 mm, stroke 120 mm, double-acting, with weight compensation and one-hand quick adjustment, 2 horizontal pressure cylinders, d = 40 mm, stroke 120 mm, double-acting, with weight compensation; 2 manual control valves, pressure gauge, 1 pressure regulating valve from 20 to 130 bar, corresponding to 550 to 3,500 kg of vertical pressing force. Equipped with a 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Painted in RAL 7035 light gray with RAL 7016 anthracite gray. ----- Price of the above machine available upon request! ----- ----- Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment including a beveling device, counter profiles for single-part production, and much more! Lrjdpfjd Ih H Nox Akmju Request the complete price list from us! ----- (Technical data according to the manufacturer, subject to change; the illustration may show optional equipment!)

Condition: reconditioned (used), functionality: fully functional, Veneering press line for wood, consisting of the following machines: - OSAMA S2R adhesive applicator - 1300 mm - NEW MACHINE - Feeder from the adhesive applicator to the conveyor - Infeed conveyor, 6000 mm long x 950 mm wide, with drive - ORMA 5100x1400 mm surface hydraulic press - 12 pistons, hot water plates, refurbished - Outfeed conveyor, 6000 mm long x 950 mm wide, with drive This press requires medium to high pressure for operation to ensure that the boards are 100% flat. Dimensions of veneering boards: 5100 x 1400 mm (solid, drilled steel boards) Board opening: 180 mm Pressure at full surface: up to 10 kg/cm2 Number of hydraulic pistons: 12 pcs - piston diameter 140 mm Teflon MYLAR film on the boards Lrjdpfx Akevva Sysmou Preparation for heating the boards with hot water - without a boiler Machine dimensions: 2300 x 5100 mm x height 2500 mm The machine has been completely refurbished, adjusted, and tested. Price: EUR 49,000,- excluding VAT, without the OSAMA adhesive applicator Price: EUR 58,000,- excluding VAT, including the OSAMA adhesive applicator

Condition: new, Year of construction: 2026, functionality: fully functional, power: 13.5 kW (18.35 HP), input current: 25 A, input frequency: 50 Hz, pressing force: 160 t, table width: 740 mm, table length: 1,300 mm, table height: 200 mm, ram plate width: 920 mm, ram plate length: 580 mm, distance table to ram: 600 mm, total length: 2,500 mm, total width: 1,700 mm, total height: 3,500 mm, overall weight: 15,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, TEHSLA EPC160 – 160 TON MECHANICAL ECCENTRIC PRESS MAIN TECHNICAL DATA - Press Force: 160 tons - Stroke Rate: 24–52 strokes/min (adjustable) - Stroke Length: 16–160 mm (adjustable) - Ram Adjustment: 0–110 mm (motorized) - Maximum Opening Between Tables: 600 mm - Table Dimensions: 1,300 × 740 mm - Ram Dimensions: 920 × 580 mm - Main Motor Power: 15 kW - Control Panel: SIEMENS SIMATIC HMI MTP1200 Comfort PRO - Clutch System: Wet clutch - Safety Light Curtains: LEUZE - Ram Guidance: Eight-sided precision guiding system MACHINE TECHNICAL SPECIFICATIONS Machine Frame: Heavy-duty welded steel construction, engineered for high rigidity, structural stability and long-term durability under demanding industrial operating conditions. Control System: SIEMENS control system with SIMATIC HMI MTP1200 Comfort PRO touchscreen interface. Clutch System: Wet clutch system designed for reliable operation and long service life. Stroke Adjustment: Adjustable eccentric stroke from 16 to 160 mm. Stroke Speed Adjustment: Variable operating speed from 24 to 52 strokes per minute on plc. Ram Adjustment: Motorized ram adjustment, 0–110 mm. Guidance System: Precision eight-sided ram guiding system, providing excellent stability, accurate ram movement and reduced wear during continuous operation. Lubrication: Automatic circulating lubrication system. Overload Protection: Hydraulic overload protection system. Safety Light Curtains: LEUZE safety light curtains for operator protection. Safety Monitoring: Oil and air pressure monitoring with alarm functions. Operation Modes: Inch / Single Stroke / Continuous Stroke. Safety Operation: Two-hand control system. CE Compliance: Manufactured in accordance with applicable CE safety requirements. OPTIONAL EQUIPMENT & UPGRADES - Pneumatic holding systems - Mechanical or pneumatic ejector systems - Die cushions / pneumatic cushions - Customized ejector and cushion configurations - Additional protective safety guarding - Remote monitoring and control systems - Remote diagnostics, servicing and troubleshooting - Additional automation solutions according to customer requirements WARRANTY: 12 months CUSTOM PRESS MANUFACTURING TEHSLA is a Slovenian manufacturer of industrial hydraulic and mechanical eccentric presses. In addition to the advertised EPC160+ model, we manufacture customized eccentric presses with different pressing capacities, working table dimensions, stroke lengths and technical configurations. Our machines can be equipped with additional automation systems, ejectors, die cushions and other customer-specific solutions. MADE IN SLOVENIA Manufacturer: TEHSLA Model:EPC160+ Country of Manufacture: Slovenia, European Union Machine Location:Ljubljana, Slovenia Inspection & Test Run:Available by prior arrangement. Contact us for further technical information, machine availability, customization options or a quotation. Lrsdsz R Sy Ispfx Akmeu Other press capacities, dimensions and customized configurations are available directly from the manufacturer upon request.

Year of construction: 1990, condition: ready for operation (used), LIQUIDATION SALE – IMMEDIATE AVAILABILITY Due to the closure of the production facility, we are offering for sale a HÄNDLE mixer and extrusion press, used in a ceramic production line. Price for the mixer and press: EUR 120,000 net, EXW, negotiable. Reasonable offers will be considered. Preference will be given to buyers who can complete the transaction and collect the equipment quickly. Equipment offered: HÄNDLE MDVG 920 B mixer, manufactured in 1990, weight 6,000 kg, power 30 kW HÄNDLE PZG 56 A/50 extrusion press, manufactured in 1990, weight 7,200 kg, power 90 kW, serial no. PZ 3098 Included: control cabinet two press heads with outlets: 24 × 39 and 32 × 45 The machines were fully operational until the plant shut down in December 2025. Wear parts (press screws, mixer paddles) were replaced in March 2025 and are in good condition. Ljdpsz Sbw Sjfx Akmeru The equipment is characterized by robust construction, durability, and straightforward maintenance. It is available for inspection at the plant in Panoszów, Poland. The machines are available immediately. Quick completion of the transaction and prompt collection are preferred. Additional technical information and photographs are available upon request.

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, I am selling a tetno machine, connected, can be tested. Nominal force: 4000 kN Ram stroke: 1000 mm Passage between columns: 3100 mm Table clamping area: 3100 x 6000 mm Electric motor power: 15 kW Lrsdpfx Aoxwlvpekmju Machine dimensions lxwxh: 6000 x 4150 x 4170 mm Press weight: 43800 kg Can send a video of the machine, via whatsapp application

Condition: ready for operation (used), B5 - Ideal for large boxes: High performance – large capacity Bales are automatically ejected Belt rollers positioned at the front for easy belt replacement Weight of cardboard bale (kg): 80-110 Weight of plastic film bale (kg): 90-130 Bale size L x W x H (mm): 1000 x 700 x 800 Pressing force (t): 5 Power supply: 1x230V 50Hz 10A Motor (kW): 1.1 Noise level (dB): 65-68 Lrodpfx Aksz Ntl Ismeu Avg. cycle time (sec): 33 Dimensions L x W x H (mm): 1360 x 895 x 2370 Weight (kg): 600 Feed opening width x height (mm): 1000 x 500 Year 2016, price: 2900 EUR

Year of construction: 1999, condition: used, Year of manufacture: 1999 Colour: Grey Membrane press Orma PM/AIR Year of construction 1999 Serial number 52850199 Dimensions 2300*900mm Max panel size 2200x800mm Max panel thickness 40mm 8 cylinders diameter 100mm Stroke 150mm Pressure 160T Pressure pressure 6 kg/cm² Heating 13kW Total power 17.3kW 380V, 35Amp Dimensions: 3900x1800xH2100mm, weight 5900kg - Year: 1999 - Serial number: 52850199 - Main motor power [kW]: 17.3 - Max. workpiece length [mm]: 2200 - Max. workpiece width [mm]: 800 - Max. workpiece height [mm]: 40 - Number of cylinders [pcs.]: 8 - Cylinder diameter [mm]: 100 Lrodpfx Aswnhicjkmeu - Total working pressure [Ton]: 160 - Working pressure [kg/cm²]: 6 - Heating boiler present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, stroke: max. 500daylight: max. 1000motor: 15performance of pump: 65oil filling: 120messurements (LxWxH): 1300 x 3300 x 2950weight approx.: 6000pressure: 300Speed: vorlauf 8 / rücklauf 13,5Electro-hydraulic workshop press 300 t- Anti-rotation device for the cylinder piston - Pressure regulating valve - Speed control throttle valve - Emergency stop safety device - Noise level: 75 dB - Soft starter - Two-hand control panel - Linear measuring device for stroke adjustment with digital display - Pressure gauge - Digital pressure display Lrodpfxez Hgb Ao Akmju - Emergency stop buttons on the control cabinet and on the two-hand control panel - Hydraulic tank including motor mounted at the lower side next to the frame - Hydraulic lines with check valves - Table manually height-adjustable and secured with 3 locking pins

Year of construction: 2017, condition: used, A mechanical eccentric press is offered. Mechanically operated press ram. Worktable with T-slots and a central through opening. Operating mode selector switch for single stroke and continuous stroke. Control panel with on/off pushbuttons. Emergency stop switch. Indicator light. Foot switch with protective cover. Side-mounted compressed air service unit. Protective guard in the press area. The machine features a heavy-duty press frame and a worktable for mounting dies. The press area is accessible via a hinged protective guard. Inspection possible by prior arrangement. Ljdpfx Aksz Sr I Tsmsru

Year of construction: 2020, condition: used, The system is designed for the semi-automatic gluing and pressing of finger-jointed box bodies made of solid wood and plywood, the system is floor-mounted and can be manually adjusted to accommodate different box sizes, up to two pneumatic cylinders can be installed on each of the four sides of the boxes for pressing, for smaller boxes the number is reduced to one cylinder per side, a dispensing system is provided for glue application, which applies the glue to the finger joints of the boxes using assembly aids, equipment: table made of aluminum profiles, two aluminum profile rails each in longitudinal and transverse direction, adjustable to the required box size using clamping levers, up to four pneumatic diaphragm cylinders for clamping the longitudinal sides, four guided pneumatic cylinders with brackets for moving the assembly aids, up to eight pneumatic cylinders for pressing the boxes, dispensing system, weight: 370kg, with documentation. An on-site inspection is possible. Lrsdpjz S Iwdjfx Akmou