Used Paint Booth for sale (4,129)

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 5,000 mm, total width: 3,500 mm, total height: 2,950 mm, inner dimension height: 2,650 mm, inner dimension length: 4,900 mm, inner dimension width: 3,400 mm, Equipment: cabin, Automotive Spray Booth The automotive spray booth is a fundamental device in paint repair technology. It enables painting operations to be carried out in safe and comfortable conditions while minimizing the negative impact on the surrounding environment and the workspace. Specifications: - External dimensions: 5000 (+ air handling unit 1350 × 2900 mm) × 3500 × 2950 mm - Entrance door: 3000 × 2600 mm (three-wing design) - Service door: 700 × 2000 mm - Structure: made of steel sheets - Heat exchanger: standard steel - Panels: steel panels with mineral wool insulation in the walls Cabin Wall Structure: - Thickness: 50 mm - Insulation: EPS polystyrene Lsdsxnpczepfx Adwehb - Color: white Cabin Base: - Cabin mounted directly on floor/concrete surface Double Ceiling: - External ceiling paneling - Full-surface plenum chamber for air supply Air Exchange System: - Supply system: - Jet turbine 4 kW – 2 units - Airflow capacity: 26,000 m³/h - Airflow system: - Jet turbine 5.5 kW – 1 unit - Airflow capacity: 18,000 m³/h Lighting: - 8 side-mounted lamps - Ceiling lighting: 24 LED tubes Air Heating System: - Single-stage oil burner Riello model 40 G20 - Burner control: manual - Heating time: 8–15 minutes Filtration System: - Double-layer filtration structure - High-capacity air purification system with filtration efficiency up to 99%

Condition: used, machine/vehicle number: 4835341, Year of construction: 2006, operating hours: 2,700 h, load capacity: 1,600 kg, lifting height: 4,200 mm, load center: 600 mm, enginetype: Electric, manufacturer: Jungheinrich Lhodpfoxlw Aqjx Adwob

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,850 mm, total length: 12,125 mm, total width: 5,150 mm, overall weight: 8,000 kg, warranty duration: 12 months, inner dimension height: 5,000 mm, inner dimension length: 12,000 mm, inner dimension width: 5,000 mm, Equipment: cabin, lighting, PAINT BOOTH 12x5x5M EZ Series Model: - LED ceiling lighting - LED side lighting - RIELLO oil burner - Four fans, including: ‎ ㅤ- 2x supply fans ‎ ㅤ- 2x exhaust fans TECHNICAL PARAMETERS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance doors: 4000x4800 mm (2 units, four leaves, reinforced hinges) - An additional BOX 1650 mm x 8000 mm should be included in dimensions – can be placed on either the right or left side. - Structure: galvanized steel frame - Heat exchanger: high-grade stainless steel - Panels: filled with mineral wool insulation - Drive-on ramps – 2 units - Fully grated floor The reinforced frame construction prevents vibration and the air surge effect from the main supply duct. Double Roof Design: - Upper outer layer - Inner truss structure with V600 ceiling filter Air Circulation System: - Supply system: Jet turbine 7.5 kW – 2 units Ljdpoxm U Exsfx Adwjhb - Exhaust system: Jet turbine 7.5 kW – 2 units Air Filtration System: - Pre-filter collects particles larger than 10 μm - Ceiling filter collects particles larger than 5 μm - Floor filter: Paint Stop - Carbon filter Lighting: - Ceiling lights: 52 LED tubes (14 angled fixtures with 4 tubes each) - Side lighting: 26 LED panels integrated into the right, left, and rear walls Burner: Riello – 2 units, oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heating time: 8–15 min (max. 80°C) Optional Features: - Roof-mounted boxes - Insulated roof - Pass-through doors - Water curtain - Color according to RAL palette - Explosion-proof (EX) version available

Condition: new, Year of construction: 2025, total length: 1,500 mm, total height: 1,900 mm, total width: 1,300 mm, warranty duration: 12 months, 🧩 Custom-Made Design All booths are manufactured to order and can be customized according to customer requirements – dimensions, fan capacity, and configuration can be adapted individually. 🟦 Water Curtain Spray Booth Professional spray booth with water filtration, designed for extraction of paint mist and overspray during coating and spraying operations. The water curtain system with droplet separation ensures effective air cleaning and provides a safe and clean working environment. Thanks to its compact stainless-steel design, the booth is ideal for workshops and small coating lines. Durable, easy to maintain, and resistant to corrosion and chemicals. 🔹 Technical Specifications - Working area: 1300 × 1500 × 1900 mm (W × D × H) - Water curtain, droplet separation - Water pump: 1.1 kW - Fan: 1.5 kW, capacity 7200 m³/h - Stainless steel construction - Water tank with drain - Power supply: 400 V / 50 Hz Lhedpfx Adexl Akyeweb 🔸 Features and Advantages - Efficient water filtration – clean air and safe workspace - Durable stainless steel construction – corrosion resistant and easy to clean - Compact size – perfect for small painting areas - Quiet and efficient operation - Easy access for maintenance and cleaning

Condition: new, Year of construction: 2020, operating hours: 1 h, functionality: fully functional, machine/vehicle number: PUBMANUAL000168, Equipment: documentation/manual, Die SWISS KRONO Kft. bietet die die Giardinagroup automatische Spritzlackieranlage und die dazugehörigen Trockenkammer zum Verkauf an. Als Anlage fügen wir Ihnen die Beschreibung über die Maschinen, sowie weitere Bilder und Informationen in einer geteilten Mappe bei. Lhsdpfxerxubpj Adwob SWISS KRONO Kft. offers Giardinagroup automatic spray painting system and the associated drying chamber for sale. As an attachment we are attaching the description of the machines as well as further pictures and information in a shared folder.

Condition: ready for operation (used), Year of construction: 2006, working width: 150 mm, overall weight: 150 kg, Conveyor Belt 2500 mm Manufacturer: Makor Type: TEP 2500 Powered conveyor belt from a finishing line (positioned in front of a Makor profile spraying machine), Length approx. 2500 mm Belt width: 150 mm Pass-through width (with existing side guides): max. approx. 320 mm Feed speed steplessly adjustable via variator Lhjdpfx Asxtnfrodwjb Equipped with stable, adjustable side guides Dimensions approx. 2500 x 550 mm (LxW) Weight approx. 150 kg Documentation available

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request Lhjdeu Afu Repfx Adweb

Condition: used, Paint mist extraction, water irrigated system - Producer Reinox - Type WW 25/22 - Width 2.600 mm - Height 1.700 mm (2.250) mm - Depth 1.640 mm - Required space 2,75 x 2.45x1,65m mm - With irrigated exhaust system - With water circulating pump - Motor power 4,2 kW - Exhaust pipe 2 x 350 mm Ljdjumvtqopfx Adwohb - With switch cabinet - In stainless steel - Voltage / HZ 400 / 500 - Location on stock - Voltage fluctuation max. +/- 5 %

Year of construction: 2021, condition: used, functionality: fully functional, Fully refurbished carousel painting plant in 2023, compliant with Industry 4.0 standards featuring Siemens interconnection. Composition: 3-stage washing (hot phosphating + double cold rinse) Drying tunnel with independent combustion chamber Painting booth with reciprocators, Gema guns, Nordson filter Touch-up station before and after reciprocators Curing oven with independent combustion chamber Workpiece dimensions: H 2100 mm – W 2000 mm – D 780 mm. Lhjdjxrl U Iopfx Adwjb Complete, overhauled, and ready-to-use plant.

Condition: used, Year of construction: 2010, functionality: fully functional, Wagner Powder painting equipment for sale! Powder coating device, year 2010 consisting of: Booth: Prima Cube 16000 Powder supply: Powder Center Powder recovery: Cyclon Filter 16000 Movement generator: KHG 350 Production process configurations INCLUDING: I. Presumes Maximum size of parts: LxWxH=2600x400x1850 mm II. Equipment Technological Conveyor automatic speed V=1.2 mtrs/min. Speed regulation between 0.5-2.5 mtrs/min 1. Pretreatment Stand MNA-3-LPG, total size 16,7 mtrs Enter size L=2,5 mtrs a. Washing, degreasing and phosphating; L=3,6 mtrs -number of spray frames – 10 -number of nozzles in frame – 18 -number of nozzles in total – 180 -delivery of the pump – 162 m3/h -power of the pump – 15 kW -vessel 4 m3 for active liquid -inner heat exchanger with LPG burner – 160 kW -temperature 500C -mechanical oil separator - solution filter -the dosing system, membrane pump with regulator -washing time – 3 min b. Dripping zone L= 3,1 mtrs -time of dripping – 2 min 30 sec c. First rinsing; L= 1,2 mtrs -number of spray frames – 4 -number of nozzles in frame – 18 -number of nozzles in total – 64 -delivery of pump – 38 m3/h -power of the pump – 3 kW -vessel 1,5 m3 for water -first rinsing time – 1 min c. Dripping zone L= 3,1 mtrs -time of dripping – 2 min 30 sec d. Fine rinsing; L= 1,28 mtrs -number of spray frames – 3 -number of nozzles in frame – 18 -number of nozzles in total – 54 -delivery of pump – 33 m3/h -vessel 1,5 m3 for water -power of the pump – 3 kW -one extra spray frame -number of nozzles in frame – 18 -fine rinsing time – 1 min e. Dripping zone L= 2 mtrs -time of dripping – 1 min 40 sec Three openings to connect to exhaust system with three ventilators Operating space made of stainless steel. Pipes made of PVC or S/S. Lodeww Adtopfx Adwehb 1 unit 2. Automatic Dryer after water AST-1-KLPG: - operating space dimensions LxWxH=7000x3000x2800 - air curtains each side to avoid heat losses - one indirect heat exchanger heated with liquid petrol gas to produce 200 kW of rated power - three blowers 6000 m3/h of air delivery - two openings to connect to exhaust system - temperature sensor and temperature regulator - overheating sensor - circulation sensor - operating space made of zinc plated steel - thermal insulation 200 mm thick - drying time 10 min 1 unit 3. Automatic Curing Oven APT-2-KLPG for curing powder paints - operating space dimensions LxWxH=10200x3600x2800 - air curtains on one side to avoid heat losses - two indirect heat exchangers heated with liquid petrol gas to produce 300 kW of rated power, of each - eight circulation blowers, capacity of each 6 000 m3/h - two openings to connect to exhaust system - temperature sensor and temperature regulator - overheating sensor - circulation sensor - operating space made of zinc plated steel - thermal insulation 200 mm thick - curing time 25 min 1 unit 4. An overhead rail conveying system ATR-ADAX, for the paint shop including the following: • straight track with hangers L=400 mm 146 mtrs • drive station 2 pc • tension station 1 pc • chain lubrication station 1 pc • drawing of the track supporting structure 1 set

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18133-00 12632868, input voltage: 400 V, Nederman ventilation unit for extraction of paint dust, oil mist, and contaminated air Lhjdjw Hw Dgspfx Adwob

Condition: good (used), Year of construction: 2003, The painting unit with heat exchanger and blowing for drying was used in the production of stairs and carpentry elements Paint wall also with extraction in the floor with a total length of about 7 mb equipped with three extraction fans Lhodpfx Adsuyy A Dewob

Year of construction: 2023, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: WQA1313, Used industrial automatic spray paint stripping demo device. Lhedpfx Aowrfayedwjb The device is designed for quick and efficient paint stripping, for example, from powder-coated parts or rims. It features a filtration system to remove paint particles from the process. Technical specifications are included in the documents. The device is ready for immediate use. We recommend using ALIT Technologies SPA paint removal chemicals.

Condition: used, !!! Attention: Only the conveyor system is offered here !!! Available for sale is a floor conveyor system for a wheel rim coating line. The system consists of the following components: - Conveyor chain - Conveyor rails (curved and straight rails) - Carriages with mounts for automotive rims - Rotating rail: the rim rotates on this rail during the coating process to ensure even paint application Lhodpsxfzuqefx Adwsb Total length approximately 150 meters Maximum part size: 550 mm diameter Maximum part height: 400 mm The system is suitable for both wet paint and powder coating processes. No control unit is included with the system. The system has been dismantled and packed in crates. Inspection is possible by appointment. The system must be serviced before being put into operation. Two additional systems are also available. These are suitable for baking/curing in an oven.

Condition: used, Year of construction: 2023, functionality: fully functional, For sale due to purchase of a larger system! Was only in operation for 1 year and was covered with cardboard. See photos. Lodpfx Aextucdsdwohb

Condition: used, Year of construction: 1990, Used machine Built approximately 1990 Ledpjwb Ehvofx Adwehb Technical specifications: W x H 2000 x 1600 mm + 2 side baffles and 1 top baffle Fan diameter 500 mm Availability: Short term Location: Rhineland-Palatinate

Year of construction: 1987, condition: used, machine/vehicle number: 29990, Volume flow: 300 cm³ Overpressure: 231 bar Max. volume flow at 25 DH/min: 7.5 l/min Inlet overpressure or required air pressure: 7 bar Air consumption: 9,7 l/DH Lodpfx Adjbnpc Ujwohb Weight: 100 kg Space requirement: 1250 x 750 x 1400 mm

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: KAP1, air demand: 16,000 m³/h, power: 36 kW (48.95 HP), suction capacity: 16,000 m³/h, Equipment: cabin, Dielectric automatic powder booth KAP1 Price: PLN 492,693.30 + VAT Electrical and energy data • Voltage: 400 V (3P + N + PE) • Power connection: 36.34 kW • Pneumatic connection: 1" • Air pressure: min. 6 bar • Air quality: oil < 0.1 mg/m³, water vapor < 1.3 g/m³ • Air consumption: 1710 Nl/min (operation) • Compressor: SC-30 • Air tank: 1800 L Lhedpev Rpx Sofx Adwjb Painting parameters • Painting speed: 1933 mm/min • Part dimensions: 800 x 1800 mm • Hanger height: 500 mm • Coating thickness: 100 µM • Gun array: vertical Technical data and configuration • Design: dielectric plastic • Passage dimensions: 1000 x 2400 mm • Air flow: 12348–16000 m³/h • Powder center: ProfiCenter CP02 • Manipulators: 2 pcs. • Guns: 8 automatic, 2 manual (ProfiSpray) • Part detection: yes (height, width) • Systems: cyclone separator, ProfiControl, beam pulling • ATEX: zone 22, II 3D Platforms and cabin body • Platforms: entry, exit, stainless steel floor, anti-slip stairs • Housing: dielectric plastic, LED lighting, slots for manipulators Air knives and suction channel • Automatic floor cleaning • Suction channel with pneumatic flap Gun blow-off and control • Automatic blow-off guns • 10" touch panel, 50 programs, manipulator control, dust extractor, drive speed X-axis and part pulling system • Automatic gun setting • Part pulling: speed 570–2830 mm/min, 2 pullers The machine also includes: • ProfiSpray A applicator • PSS-1 controller • PM-1 guns • ProfiCenter CP-02 powder center • CK-D1400L cyclone dust extractor • MA1-180 manipulator and MX1-10 X-axis • OZ-12H dust extractor • ProfiControl 10" control • BP-H2000 W900 part measuring system

Year of construction: 2020, condition: new, Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipment.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.Identification of details using special tags. Lsdpfofy T Arox Adwshb A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.

Year of construction: 2020, condition: new, ROMER cabins are equipped with 4 "color touch screen.The cab operation is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual.The cabins are fitted with a sensor that queues filters for cleaning when they plug. The system also informs when the filters have already worn out. The electronic system of automatic filter cleaning has a range of adjustment of cleaning frequency and time of firing. Each filter is cleaned separately, and the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Aluminum fans are very quiet, work at 74-79dB - It's not much. it is difficult to talk even with a standard cabin construction.The cabin, by pulling the sling beams inside the cab, improves the work efficiency, thus relieving the painter, who does not have to move them by hand anymore. ROMER cabins are equipped with 4 "color touch screen.The cab operation is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual. Filter clogging sensor The cabins are fitted with a sensor that queues filters for cleaning when they plug. The system also informs when the filters have already worn out Automatic filter cleaning The electronic system of automatic filter cleaning has a range of adjustment of cleaning frequency and time of firing. Each filter is cleaned separately, and the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore.Low volume Aluminum fans are very quiet, work at 74-79dB - It's not much. it is difficult to talk even with a standard cabin construction. Broach through the cabin The cabin, by pulling the sling beams inside the cab, improves the work efficiency, thus relieving the painter, who does not have to move them by hand anymore.Automatic filter cleansing Lsdpfjfy T Tbjx Adwshb ROMER's cabins are equipped with an electronic automatic filter cleaning system. Booth has an adjusted range of cleaning interval, time of the impulse. Each filter can be cleaned individually by using control buttons. We know from experience that it's hard to expect from an operator to clean every single filter entirely. Thanks to this system operator won't have to worry about it anymore. Booth drive-through chain Thanks to installed drive-through chain there is no need for an operator to drag every element into the booth himself.Elements drive through the booth all on their own which improves the efficiency and allows operator to focus just on the painting part.Regulated air suction In our booths we install an anti-static plate that covers filters. It protects filters from a first wave of a powder. In a well designed booth it also improves the velocity of air moving across the painted element that reaches filters. It improves suction and makes painting easier. Location of a plate can be regulated ROMER's powder booths are fitted with professionally made tanks, which are responsible for the collection of air needed to clean the filter. Compressed air is released from the tank in a fraction of a second while passing through the ROMER JET ™ system expands in the filter at high velocity and escapes through the micro holes in the filter cleaning it, and the

Year of construction: 2020, condition: new, ROMER® is the largest producer of powder paint shops in Poland, and one of the largest in Europe. ROMER® is over 10,000 manufactured devices operating in over 45 countries around the world. ROMER® Produces single technological equipment for powder paint shops as well as complete fully automatic turnkey paint shops. Lhsdpfx Aofzq Ryjdwob ROMER® provides heating solutions for the aero and automotive industries for the largest concerns in the world. We provide warranty and post-warranty service of the devices we sell with a full range of spare parts.

Year of construction: 2020, condition: new, ROMER cabins are equipped with 4 "color touch screen.The cab operation is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual.The cabins are fitted with a sensor that queues filters for cleaning when they plug. The system also informs when the filters have already worn out. The electronic system of automatic filter cleaning has a range of adjustment of cleaning frequency and time of firing. Each filter is cleaned separately, and the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Aluminum fans are very quiet, work at 74-79dB - It's not much. Ljdpfxofz Atbj Adwehb it is difficult to talk even with a standard cabin construction.The cabin, by pulling the sling beams inside the cab, improves the work efficiency, thus relieving the painter, who does not have to move them by hand anymore. ROMER cabins are equipped with 4 "color touch screen.The cab operation is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual. Filter clogging sensor The cabins are fitted with a sensor that queues filters for cleaning when they plug. The system also informs when the filters have already worn out Automatic filter cleaning The electronic system of automatic filter cleaning has a range of adjustment of cleaning frequency and time of firing. Each filter is cleaned separately, and the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore.Low volume Aluminum fans are very quiet, work at 74-79dB - It's not much. it is difficult to talk even with a standard cabin construction. Broach through the cabin The cabin, by pulling the sling beams inside the cab, improves the work efficiency, thus relieving the painter, who does not have to move them by hand anymore.Automatic filter cleansing ROMER's cabins are equipped with an electronic automatic filter cleaning system. Booth has an adjusted range of cleaning interval, time of the impulse. Each filter can be cleaned individually by using control buttons. We know from experience that it's hard to expect from an operator to clean every single filter entirely. Thanks to this system operator won't have to worry about it anymore. Booth drive-through chain Thanks to installed drive-through chain there is no need for an operator to drag every element into the booth himself.Elements drive through the booth all on their own which improves the efficiency and allows operator to focus just on the painting part.Regulated air suction In our booths we install an anti-static plate that covers filters. It protects filters from a first wave of a powder. In a well designed booth it also improves the velocity of air moving across the painted element that reaches filters. It improves suction and makes painting easier. Location of a plate can be regulated ROMER's powder booths are fitted with professionally made tanks, which are responsible for the collection of air needed to clean the filter. Compressed air is released from the tank in a fraction of a second while passing through the ROMER JET ™ system expands in the filter at high velocity and escapes through the micro holes in the filter cleaning it, and the

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Lodpfx Adofz Ndyowohb Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2020, condition: new, Automation Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipme Array of guns Vertical 8pcs. pistols Control - profiControl 10 " Cyclone - CK-D1250 Dust collector - OZ-8H Center - RP-01 + SV-200 MA1-23 x 2 pcs manipulator Os X MX-100 x2 pcs. Horizontal goal - Horizontal goal W400 x2 items Vertical gate - H2000 vertical gate The maximum painting speed is 1,65714285714286m / min 0 piece pulling machines Pow. requires 10188m3 / h to fly Lhodpfxsflq Spo Adwob Required min. cabin passage W900mm H2100mm Pipe diameter 500mm - 16.9m / s minimum 16m / s Air consumption 1210 L / min + Sug. SC-20 compressor Min.current connection 28.14 kW Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished. Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off. Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators. The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns.

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. Bmt7r28v0e Lhjdpfjf Aad Nox Adweb They can be widely used both with simple, as well as complex multidimensional processes They are programmed using a PLC controller Working with long and short strokes The toothed belt transmission ensures quiet operation Maintenance-free AC motor Narrow column design for space saving. The robust construction of the manipulators ensures great possibilities and high stability. The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables