Used Paint Booth for sale (4,843)

Condition: new, Year of construction: 2023, Graco Merkur spray pump 30:1, 36:1, 20:1, 24:1, 48:1 and more sizes, both for wall and on trolley. Now on stock at very strong promotional prices right now! Dedpfx Adeq Aubbsdscr The price is for Graco 30:1 airless for wall. Call for offers on other models. Prior sale reserved.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Dcjdpfx Adowzl Hxjdor Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Year of construction: 1987, condition: used, machine/vehicle number: 29990, Volume flow: 300 cm³ Overpressure: 231 bar Max. volume flow at 25 DH/min: 7.5 l/min Inlet overpressure or required air pressure: 7 bar Air consumption: 9,7 l/DH Dodpfjbnpc Uox Addscr Weight: 100 kg Space requirement: 1250 x 750 x 1400 mm

Condition: new, Year of construction: 2025, functionality: fully functional, Powder Coating Plant With Conveyor Djdsv Nv Dfjpfx Addecr Our experienced team prepares powder coating plant in special design and special sizes for each project. Please contact us for detailed information - Conveyor system - A conveyor system is a common piece of mechanical handling equipment that moves materials from one location to another. Conveyors are especially useful in applications involving the transport of heavy or bulky materials. Conveyor systems allow quick and efficient transport for a wide variety of materials, which make them very popular in the material handling and packaging industries. They also have popular consumer applications, as they are often found in supermarkets and airports, constituting the final leg of item/ bag delivery to customers. Many kinds of conveying systems are available and are used according to the various needs of different industries. There are chain conveyors (floor and overhead) as well. Chain conveyors consist of enclosed tracks, I-Beam, towline, power & free, and hand pushed trolleys

Condition: good (used), functionality: fully functional, High-pressure piston-diaphragm pump. Universally suitable for aggressive, abrasive, or shear-sensitive products. Very low rinsing agent consumption. For all applications up to 250 bar and 5 l/min. Supplies up to 8 AirCoat spray guns. + 3 automatic AirCoat spray guns with internal control for installation in automated painting systems. +FITTINGS+AIR/PRODUCT HOSE Djdpfxjxmf Svj Addecr

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1400(h) Overall dimension(mm): 3100(w)x1850(h)x810(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) Dsdeia Ta Hopfx Addjcr - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: good (used), Year of construction: 1994, Technical data: - Manufacturer: Heesemann Bdjdmayow Dplws Tmbeh - Type: EA4 - Year of construction: 2002 - Working width: 1,300mm - Working height: 880-920mm - Scooter transport, rubberized rollers - Roll pitch: 65mm - Roll diameter: 60mm - Fine dust filter Dsdpfoxiy Htsx Addecr Arrangement of the dust removal modules seen in the direction of flow: 1) Air blowing channel 1 piece from below 2) Ionization from below 3) Air blowing channel 2 pieces from above (With its own fan, no compressed air required) 4) Ionization bar from below and from above Installation dimensions: - Installation length: 830mm - Width: 2.245mm - Height: 1,470mm - Suction nozzle: D 160mm - Height adjustment: motorized - Seperat control panel with hight adjustment included ( see pictures )

Condition: used, used paint mist disposal older Dcodpfxsw I Ut Te Addsr on rollers Availability: short-term Storage location: Röllbach

Condition: new, Year of construction: 2024, 4 PIECES AVAILABLE AT SHORT NOTICE with 15 supports (support surface: piping rubber) dimensions: LxWxH 910 mm x 700 mm x 1850 mm shelf depth: 510 mm Dcjdpfxegmht Ss Addor shelf width: min. 500 mm - max. approx. 2000 mm Distance clear width from the shelves: approx. 78 mm Load capacity. max.ca. 600 kg evenly distributed load capacity/rake: approx. 40 kg Weight: approx. 90 kg

Condition: used, Powder Coating Plant - Automatic The plant moves with conveyor system. The material to be powder coated is hung on the line, the system automatically follows the steps below and powder coats the material after cleaning it. The best project suitable for the existing facility is made. Special design is made according to the customer's product and needs. Dsdpfxjv Npa Hs Addjcr

Condition: new, Year of construction: 2025, conveyor belt length: 3,000 mm, Powder coating set Powder Coating Oven 1500 x 3000 x 1800 mm Powder Coating Booth 2800 x 2200 mm Wagner Paint Applicator Oven/Dryer Technical Specifications: Working dimensions: 1500 x 3000 x 1800 mm with NIKO 24.000 overhead rails • Power consumption: 43 kW • Maximum operating temperature: 220°C Equipment: • NIKO 24.000 overhead rail transport • Convection (Even temperature throughout the oven) • 2 x fans for air circulation • Safety locks for opening and closing. Powder booth: •Working dimensions: 2800 x 2200 mm •Fan power: 2.2 kW Djdpeguku Ujfx Addecr •Fan capacity: 10,500 m³/h •Very quiet operation •Automatic filter cleaning •LED lighting Wagner Sprint 2 electrostatic applicator CHOOSE BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. products are EC certified. We offer our own transport – prices are determined on a case-by-case basis, based on each offer. We issue VAT invoices. Short lead times! Machines in various, customized configurations and sizes are available! Contact us today.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, Paint/spray wall dimensions without fan and control Panel! Dcsdpfeia Ta Rjx Adder Extraction surface - dimensions (mm): 3000(w)x1900(h) Overall dimension(mm): 3100(w)x2350(h)x810(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty We can manufacture filtration supply (new air to sprayroom). Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, total height: 5,000 mm, total length: 15,000 mm, total width: 5,000 mm, Equipment: cabin, Picture is indicative, not actual. Detailed plans and 3D views can be provided upon request! High-performance spray booth installation (15m x 5m x 5m) with integrated paint storage and preparation room. Designed and manufactured by SIMA (Belgium), this turnkey system offers a reliable and energy-efficient solution for industrial surface treatment. Key Features: - Full spray booth with diagonal airflow, advanced ventilation and filtration (EU4, EU5, Andrea, Paintstop). - Direct gas burner (300 kW) with 100% efficiency and frequency-controlled ventilation (31,500 m³/h). - ECO-mode with automatic recirculation: up to 85% energy and gas savings during standby. - Touchscreen HMI (Schneider) with programmable spraying, drying, flash-off, and cooling modes. - LED lighting system (58 fixtures, 1200 lux), optional integrated emergency lighting. - Rigid insulated Jupiter panel construction, fire-resistant, with service and emergency exits. - Separate paint storage/mixing room (3.5m x 2.5m x 2.5m) with ATEX ventilation, fire dampers, and integrated control. - Complete with CE certification, technical dossier, and 2-year warranty (1 shift). Scope of Supply: - Delivery, installation, and commissioning included. - Training, technical documentation, and maintenance options available. - Condition: New – never used. Dsdpfoxg Igcox Addscr - New price was: €130,000 (excl. VAT). - Price can be discussed = needs to leave! - Was not installed due to sale of business before delivery of cabin. Ideal for industrial applications, OEM production lines, or large workshops requiring a reliable, energy-efficient, and compliant spray booth with integrated paint kitchen.

Condition: new, Year of construction: 2022, Paint mist extraction New device Year of construction 2022 Ideal for woodworking companies, joineries/carpentry workshops and the trades in general Dodpfsw I Uygox Addjcr Highly efficient air purification with high separation efficiency Mobile device for use at various locations in the workshop Easy handling Certified for ATEX Zone 2 Long filter service life Delivered ready to plug in Suction nozzle diameter 300 mm L x W x H approx. 1012 x 1135 x 1405 mm Connection 1.5 kW / 400 V Filter area 1 m² Noise emission max. sound pressure level 72 dB(A) Volume flow max. 500 Pa Weight 175 kg incl. starter set for FAG 1-4 Diameter 300 mm (3 m hose, 2 hose clamps, 1 collar with flange ring, 1 cover flap for outer wall) Availability: short term Storage location: Hochheim

Condition: new, The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system. It is delivered as a plug-in paint mist extraction system. Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz Fan speed 960 / 1.430 RPM capacity 3.000 / 6.800 m3/h dimensions (B/ W/ T) 1.912 x 1.405 x 943 mm with attached side panels 2.971 x 1.405 x 1.215 mm Dsdpfx Aohby Risddjcr filter area 2 m2 noice level 72,0 dB(A) weight 248 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18133-00 12632868, input voltage: 400 V, Nederman ventilation unit for extraction of paint dust, oil mist, and contaminated air Dcjdpfx Asw Hw Dgsddor

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1306/2013-07, A fully equipped industrial powder coating booth is now available for sale, ideal with optional motor and automatic filter cleaning: • Dimensions (external): 1850 × 1600 × 2600 mm • Extracted air volume: 3,000 m³/h • Motor: approx. 1.5 kW • Filter cartridges: 2 pcs + automatic cleaning • Electric connection: 3 × 380 V/220 V, 50 Hz • Air velocity: 0.2–0.5 m/s • Maximum suspension size: 250 mm × 1000 mm • Spray opening: 1100 × 1100 mm Dcsdpjw Nv Axsfx Addsr Accessories: • Sheet metal housing with transparent panel • Extraction ventilation + silencer • Compressed air tank + preparation unit • Automatic filter cleaning, powder recirculation container • EU-standard control cabinet, pneumatic system + airflow sensor 🟢 Condition: • Good technical condition, well-maintained • Documentation and fully operational system 💰 Asking price: 5,200 EUR + VAT

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 4430(w)x1900(h) Overall dimension(mm): 4530(w)x2350(h)x810(d) Djdjia Ta Uepfx Addjcr Technical data: - Fan power 4.4kW (ATEX) - Fan suction capacity: 24000 m³/h (max 1200Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us

Condition: new, Year of construction: 2020, operating hours: 1 h, functionality: fully functional, machine/vehicle number: PUBMANUAL000168, Equipment: documentation/manual, Die SWISS KRONO Kft. bietet die die Giardinagroup automatische Spritzlackieranlage und die dazugehörigen Trockenkammer zum Verkauf an. Als Anlage fügen wir Ihnen die Beschreibung über die Maschinen, sowie weitere Bilder und Informationen in einer geteilten Mappe bei. SWISS KRONO Kft. offers Giardinagroup automatic spray painting system and the associated drying chamber for sale. Dsdsrxubpepfx Addjcr As an attachment we are attaching the description of the machines as well as further pictures and information in a shared folder.

Year of construction: 2023, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: WQA1313, Used industrial automatic spray paint stripping demo device. Dsdjwrfayopfx Addecr The device is designed for quick and efficient paint stripping, for example, from powder-coated parts or rims. It features a filtration system to remove paint particles from the process. Technical specifications are included in the documents. The device is ready for immediate use. We recommend using ALIT Technologies SPA paint removal chemicals.

Condition: used, functionality: fully functional, Painting line/spray hook conveyor with 19 hooks, continuous loop, consisting of 2 rails of 5000 mm each, 2 rails of 800 mm each, with 4 bends. Available at the beginning of August. Dedpsw Eb Rhefx Addjcr

Condition: used, inner dimension height: 1,950 mm, inner dimension width: 1,850 mm, No. 3230 Complete paint shop Wagner Rafi / Wildcat / Finish 104 B Ex Used Complete spray room equipment Spray wall Rafi mobile 1850 x 1950 mm width x height 2 drying trolleys 1 spray gun Wagner Wildcat / IceBreaker motor / pump type 18 - 40 1 Wagner Finish 104 B Ex sprayer Sale by customer order, ex location near 69124 Heidelberg, without dismantling, without transport and assembly Dismantling, loading and transportation by us optionally possible Dodpfx Ajwn Tvusddecr Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, Pony 7000 Sales Price List Paint booth 7 x 4 x 3 meters • Reinforced partial grating 5 mm • Height 3 meters (Sprinter height) • 2 x 7.5 kW motors (belt drive) • ATEX ceiling lighting • 24,000 m³/h • Incl. 2 drive-on ramps for above-floor version • Above-floor and in-ground version at same base price Dcsdpfewzmcbex Addjr Base price: €28,900 Base price for 2.76 meter height version minus €1,000 (passenger car height) Base price for 3.5 meter height version plus €1,000 (motorhome height) Door-in-door system: €1,800 Double glazed doors: €1,800 11 kW motor incl. larger fans and enhanced control cabinet with direct drive: €7,770 15 kW motor incl. larger fans and enhanced control cabinet with direct drive: €8,610 Side lighting: €2,870 Ceiling lighting EX protection according to ATEX: €1,470 Full light-duty grating: €1,785 Full heavy-duty grating, reinforced 5 mm: €2,990 Direct drive with PLC control for 11 kW motors (incl. soft start): €15,120 Direct drive with PLC control for 15 kW motors (incl. soft start): €17,640 Soft start for 7.5 kW motor (belt drive only): €1,239 PLC control for 7.5 kW 24k m³/h motors with 3-stage energy saving program: €5,670 PLC control for 11 kW 30k m³/h motors with 3-stage energy saving program: €7,770 PLC control for 15 kW 30k m³/h motors with 3-stage energy saving program: €8,610 PLC control for 2 x 5.5 kW 36k m³/h (belt drive) motors with 3-stage energy saving program: €5,565 Pneumatic drive-on ramp: €4,900 Grating modification for lift: €1,785 Pass-through system with double gates (without door-in-door): €3,250 Tri Axis ramp: €7,980 Second service door (position freely selectable): €1,150 Info: 11 kW motor set at 1,200 rpm (inverter) (1,000 rpm motor) achieves 36,000 m³/h

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 2190w)x2350(h) Overall dimension(mm): 2295(w)x2295(h)x810(d) Technical data: - Fan power 2.2kW (ATEX) Dcedpsia Ta Aefx Addjr - Fan suction capacity: 12000 m³/h (max 1100Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Dedpfexa H Ewox Addecr Do you have any questions or suggestions? We are happy to assist you.