Painting Line Venjakob Perfect, OIR, Air Jet, 3D-

Venjakob VEN SPRAY and Drying, UV Line

Condition: new, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider ----- - Pos. 1: Legend 500 under table miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop ----- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_500 - 6400/7000 - Roller conveyor with guide to the right of the saw. Knjdevu Hd Tepfx Adbed Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ----- Total price demonstration machine from stock 73447 Oberkochen: on request! ----- More options like longer/shorter inlet/outlet, Stop systems on re...

Condition: like new (used), WEINIG Hydromat H30N, S/N 253-886, year 1991, 9 spindles Hydromat H30 with short infeed table and heavy 6-roller infeed - Working width max. 300 mm - Working height max. 140 mm - Electronic feed infinitely variable 12 - 120 m/min. - Feed motor 22.0 KW - 1st spindle bottom 11.0 KW - 2nd spindle right 11.0 KW - 3rd spindle left 15.0 KW - 4th spindle left 11.0 KW - 5. spindle right 11.0 KW - 6. spindle top 22.0 KW - 7. spindle bottom 30.0 KW - 8. spindle top 11.0 KW - 9. spindle bottom 11.0 KW - All spindle motors with electronic brake - COMPLETELY NEW MILLING SPINDLES - Spindle diameter ø 50 mm - Spindle speed 6,000 rpm. - 6 driven rollers in the table - hard chrome plated - Spindle 1 + 6 + 7 + 8 + 9 with NEW counter bearing - Hydraulic counter bearing clamping - Spindle 2 + 3 + 8 + 9 with straight jinter - Spindle 4 + 6 pneumatic pressure - NEW feed rollers D=170 mm - Hard chrome-plated table tops - Hard chrome plated stops - - Heavy pressure rollers from above - pneumatic - Heavy pressure rollers from the side - pneumatic - Automatic table lubrication - NEW - Central position of the lubrication points - NEW control panel free-standing, 5m cable - NEW free-standing control cabinet, 5m cable - Operating instructions, spare parts list and wiring diagram + Many NEW spare parts / accessories. Dimension: - Total length approx. 6,150 mm - Total width approx. 2,160 mm - Machine weight approx. 9,500 KG Connected load: - Total connected load approx. 157 KW Knsdpfx Aetynpxodbjd Condition: Machine as shown on the photos - technically as good as new Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: At any time by appointment Offers + inquiries only with complete company data Subject to errors and prior sale

Condition: excellent (used), Angel Victory 1350H500V/220 Combi Closing 220 tons year 2004 Clamping plan WxH 960x830 Scrow 55mm+40 mm 618 cm3+251 EC100/A03 Minmal mold height Kodpfx Aopa Rhbjdbond 320mm Maximum 730mm

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! Ksdpfefz U Hvex Adbond The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: used, Year of construction: 2011, operating hours: 26,920 h, IRB 6640-235/2.55 Construction year 2011 Kjdpoim Si Aofx Adbond We can offer you this robot overhauled too!

Condition: excellent (used), ROLLER COATER (REVERSE) Max working width mm 1300 Length of the machine mm 1600 approx Built-in Electric and command cabinet Feeding system by motorized rollers (power KW 0.75) Feeding speed adjustable (from 6 to 24 m / min) Total installed power KW 4.1 No. 2 working heads: * 1st head (with 2 rollers) Chromium plated Dosing roller diam. mm 174 + Rubbered Spreading roller diam. mm 248, Knodpjidqwpofx Adbjd with 2 adjustable speed variators (power KW 0.37 + KW 0.75), with also a counter-placed (bottom side) reference rubbered roller * 2nd head (with 2 rollers) Chromium plated Dosing roller diam. mm 174 + Rubbered Spreading roller diam. mm 248, with 2 adjustable speed variators (power KW 0.37 + KW 0.75), with also a counter-placed (bottom side) reference rubbered roller

Year of construction: 2019, condition: refurbished (used), fiber laser cutting machine power: 3000W table size: 3000x1500mm pallet changer Siemens controller with touch screen Siemens drives THK guides Precitec Procutter auto focus torch IPG resonator chip conveyor CE offered with: Knsdpfohturnsx Adbed warranty CAD / CAM software setup delivery (optional) training this machine can be tested under power any time. please contact us

Condition: new, Year of construction: 2024, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) Knedpfsgwt S Tox Adbed • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Optional: - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set Knsdsuuz Iiopfx Adbed

Condition: used, Coating system Hymmen CombiCoater ELX-S 1400 with UV dryer. Knodpfx Ajlf H Tcsdbed * Technical data will follow shortly * For self-dismantling and collection.