Used Paint Removal Paint Wall for sale (13,092)

Condition: excellent (used), Paint booth wall Ghebal Impanti Length: 4000 mm Height: 2000 mm Ljdpfx Ajx Dcc Heansta 2x cardboard filters Pint Stop filters Filtration capacity: approx. 15,000 m³/h Motor power: 4.0 kW CE mark

Condition: good (used), Your contact persons in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Mr: Simon Blank We offer you here a used partition wall of the manufacturer Schulte for sale. Technical data of the partition wall: Manufacturer: Schulte The partition wall is suitable for a shelf depth of of 250 mm. The scope of delivery includes: 01x partition wall, used Material colour: galvanised Total width: approx. 230 mm weight / piece: approx. 0,361 Kg Ljdpfx Aajg Urd Ajnsta Partition wall (height): approx. 150 mm The partition wall is used and could have slight show slight soiling, dents, scratches, or similar. Our services at a glance: (prices on request) Assembly, installation our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: used, Year of construction: 2016, unused - like new Airflow rate: 5,500 m³/h Power: 2.0 kW Filter area: 3.2 m² Negative pressure: 920 Pa Dimensions: 2770 x 800 x 1860 mm Weight approx.: 195 kg Ltedpfx Aaex H Rxqenea Stock location: Nattheim

Condition: used, Höcker Polytechnik paint booth consisting of: * Spray booth approx. 3 x 2.5 m * Air supply duct * Heat exchanger * Explosion-proof lamps. Technical specifications: on demand Ljdpfx Aasxvb Sqonjta

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Offered at a special price, but must be dismantled by the buyer Technical data: see photos Location: ex-site Saarland Ltsdjxvivqspfx Aanea

Condition: good (used), CEE wall socket -Construction -5 pole -Type: GHG 531 4506 V0000 -EX Protected Ltedeb A Sf Repfx Aanoa -Weight: 0.5 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1624x950x2345 mm Weight 0 kg Lsdpfxsvz El No Aanjta Total power requirement 1,5 kw

Condition: good (used), Your contact persons in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Mr: Simon Blank We offer you here a used partition wall of the manufacturer SSI Schäfer for sale. Technical data of the partition wall: Manufacturer: SSI Schaefer Type designation: TRF4410 The partition wall is suitable for a shelf depth of of 400 mm. The scope of delivery includes: 01x partition wall, used material colour: galvanized Total width: approx. 365 mm weight / piece: approx. 0,202 kg Lodpfjg T H Dzex Aanjta partition wall (height): approx. 100 mm The partition wall is used and could have slight show slight soiling, dents, scratches, or similar. Our services at a glance: (prices on request) Assembly, installation our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: used, used overspray extraction system Condition: age-appropriate Ljdpow I Ut Tofx Aanjta on castors Availability: short-term Storage location: Röllbach

Condition: new, Year of construction: 2025, functionality: fully functional, Fenice Plain Spray Booth Wall Brand new Available options: Plain-2000mm net price 17,800 PLN Filtration capacity 8,000 m3/h Motor power 1.5 kW Plain-3000mm net price 21,500 PLN Filtration capacity 11,000 m3/h Motor power 2.2 kW Plain-4000mm net price 25,800 PLN Filtration capacity 15,000 m3/h Motor power 4.0 kW Plain-5000mm net price 34,000 PLN Filtration capacity 16,500 m3/h Motor power 5.5 kW Plain-6000mm net price 38,000 PLN Ltjdpfx Ajxz Achjanoa Filtration capacity 22,000 m3/h Motor power 2.2 kW + 2.2 kW Custom sizes available on request

Condition: used, Air-driven piston pump, * No. 1: K. Schmidt type DC 30.20/4, * No. 2: BEDE AIRLESS, max. approx. 36 l/min. Lsdpfxjlf H S Us Aanota

Condition: good (used), Paint module Gun Driver Module -Type: Spraymation 305910-2 -50 VDC Price: per piece Quantity: 2 available -Weight: 0.8 kg Ltjdpfx Ajb A Rk Tsanoa

Year of construction: 2012, condition: like new (used), Wall-mounted slewing jib crane TRANSPORTEC Type:PW1,25-5,0 Year 2012 Load capacity: 125 KG Outreach: 5000 mm Complete with fastening elements, no chain hoist and test book. Ltjdporqwdpjfx Aanea Otherwise in mint condition 2nd piece in stock Price per piece 1 250,-€ net

Condition: good (used), Your contact persons in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Mr: Simon Blank We offer you here 50 used partition walls of the manufacturer SSI Schäfer for sale. Incl. transport - Germany-wide - (island transport excluded) Technical data for the partition wall: Manufacturer: SSI Schäfer Type designation: TRF4410 The partition walls are suitable for a shelf depth of of 400 mm. The scope of delivery includes: 50x partition wall, used material colour: galvanized Total width: approx. 365 mm weight / piece: approx. 0,202 Kg Lsdpfx Aog Urndeansta partition wall (height): approx. 100 mm The partition walls are used and could have slight show slight soiling, dents, scratches, or similar. Our services at a glance: (prices on request) Assembly, installation our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology Lsdpfx Aaeu T Hrponota with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: used, Year of construction: 2016, Used Makor START ONE spray coating machine suitable for low-volume woodworking production. Designed for applying water-based or solvent-based paints and glues to veneered components and PVC panels. Ideal for companies moving from manual finishing to automatic spray coating. Equipped with PLC control system with intuitive interface and automatic panel detection to optimise paint usage. Features a self-cleaning paper transport system, reducing maintenance and downtime. Spraying unit includes an electronically controlled oscillating arm with capacity for up to 4 spray guns, 2 high-pressure feed circuits, and quick-change coupling system. Efficient air-flow and filtration system ensures clean operation and environmental compliance. Technical Data: • Feed speed: 1–4.5 m/min Lodpjx Iggyefx Aanota • Air capacity: 10,000 m³/h • Installed power: 7 kW • Working height: approx. 900 mm

Condition: used, machine/vehicle number: 205, Year of construction: 2025, Wall printer that prints up to approx. 2.4 m wall height, including accessories such as an Android tablet LENOVO Tab M7, rail system, and sturdy, precisely fitting wallPen transport bags for all components of the printer. Ledpfex Akiljx Aansta

Condition: good (used), Year of construction: 2009, For sale GIARDINA MOS/4PLUS paint line Ltedpfx Aaetxnp Nsnea

Condition: excellent (used), Extraction dust removal Nedermann type 663 with 2 suction arms Very good condition, directly from production!!! Ltjdpfx Aasiyyxcenja

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 42 ratings ✈️shipping : 45-day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ⭐€10,850 EXCL.VAT & SHIPPING⭐ ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ⭐ Paint Booth – WETLINE-SP-1500 ✔️ Internal dimensions: 1390 mm L * 1500 mm W * 1400 mm H ✔️Pool height : 561 [mm] ✔️Filter system : double layer water curtain ✔️Filtering material : city water, plate filter and mechanical separator with backwash ✔️Filter material cleaning : thin and thick grid ✔️ Pump output : 1.5 [kw/h] 940 [d/d] x 1 piece ✔️Number of fans : 1 piece ✔️Fan performance : 5,400 m3/h x 1 ✔️Fan motor power : 3 kw/h ⭐The cabins can be made of galvanized sheet metal or stainless steel. They can be designed to be integrated into the automatic and manual systems. Lodpfxjc Uthdj Aanjta ⭐At the pool there is a platform for material and personal safety. The platform covers the entire pool. ⭐In the Filterline wet painting booth, environmental pollution is prevented by the simultaneous use of 3 different filter systems. ⭐Wet paint particles, sucked in the air by a suction fan, are caught by the water curtain at the back of the cabin and transported into the pool. ⭐Wet paint particles in the trace amount that are not caught by the water curtain are caught by the separators on the suction ducts on the back of the water curtain, and the fresh air outlet is from the flue. ⭐The backwash system is applied in the separator section to help the process of retaining the wet paint particles of the separators. The filtration efficiency, whose contact area is increased by spraying wash water through the nozzles, is maximized. ⭐While paint dirty water accumulated in the basin enters the pump suction chamber, it goes through a coarse and a fine mesh to prevent clogging of the pump spray water, thus ensuring paint particles are retained. ⭐When the dirty water in the pool becomes unusable, it can be disposed of from the waste water valve located behind the grates in the suction department. ⭐By using a paint separator system, the water in the pool is cleaned from the paint and used continuously. ⭐The separated paint residues are drained by a filter press and must be disposed of properly. ⭐Price quoted is for the smallest standard size in stainless steel. All devices/machines are new, not used. Do you want a special configuration ❗ Call us now❗ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: excellent (used), functionality: fully functional, drying rack for drying parts after painting double-sided length of shelves 780mm maximum distance 2520mm minimum distance 350mm 22 shelves Lsdjvcb Ivopfx Aanjta bars covered with rubber mobile construction clearance between bars 115mm

Condition: good (used), Paint booth, drying booth, paint spraying system Manufacturer: LUTRO Ltedpfxori I Nbe Aanja Internal dimensions (LxWxH): approx. 750x500x400 cm Bolted steel construction with sandwich panels Room volume: approx. 150 m³ 2 front extraction walls and a supply air ceiling with 4 zones Each side with 4 explosion-proof lights with 4 fluorescent tubes each Front side fully openable with sectional door Cabin roof can be opened in the center for entry with overhead crane 2 side entrance doors Complete with control cabinet Extraction motors, etc. Heating system for supply air preheating Airless spray unit 161225ä

Condition: new, AUTOMATED PAINT SHOPS Ltodpfx Aaedy Ez Ienea These are the paint shops where your product is designed and manufactured by our engineers in line with your capacity, use area and other demands. Maximum efficiency is aimed to be provided with minimum staff and the least space usage at electrostatic powder coating or wet paint, sandblasting, varnishing, glazing, coating, washing and similar system requirements.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ 35 day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ ►►Buy It Now◄◄ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ Here you will find our latest generation of compact stripping systems! High-quality paint removal tank for gently removing paint from aluminium, Material made of stainless steel V4A (AISI 304). Anti-magnetic, acid-resistant, very robust design for long-term daily use. With CE mark for all systems including cover, double-walled and heat-insulating. Digital control with temperature limiter control box with FI protection and digital display, 0-110 °C continuously adjustable. 4-way adjustable feet for alignment. High quality ceramic heating element. V4A (AISI 304) stainless steel drain valve for quick and effective cleaning of the system. emergency switch. The price shown is for the smallest standard model. Other options can be requested. ⭐ PAINT REMOVAL TANK – BSK-1200-700*700 ✔️ Working dimensions (L/W/H): 1200 x 700 x 700 mm ✔️ External dimensions (L/W/H): 1450 x 950 x 1250 mm ✔️ Inside the tank is V4A stainless steel (AISI 304) ✔️ Outside the tank: stainless steel. ✔️ Adjustable feet ✔️ Capacity: 832 liters ✔️ Electrical heating power: 22 Kw/h - 2 levels - Fast heating ✔️CE - certified ✔️ High-quality V4A stainless steel tubular heaters ✔️ Industrial damper for easy lid opening and closing ✔️ Exit/outlet via ball valve ✔️ Digital control with temperature limiter and timer ⚙️ Not included in the offer, optional extras: ►Stripper booth (optional) ►Drip tray (optional) ►Crane frame and crane (optional) ►Blender (optional) ►Piston cap (optional) ►Pneumatic cylinder cover ►Extraction hood (with explosion-proof fan) (optional) ►Additional immersion basket ⭐⭐Depending on the chemical to be used, we also have tank models made of V2A AISI 304 stainless steel. Please pay attention to this when making your selection! Ask about the price difference.⭐⭐ Do you want a special configuration ❗ Call us now❗ Lodofw Nvxjpfx Aaneta ✅WE OFFER SPECIAL SOLUTIONS, NOT JUST STANDARD SIZES.✅ ✅WE DESIGN, PRODUCE AND INSTALL SPECIALLY FOR YOU.✅ ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, total height: 3,500 mm, total length: 7,000 mm, total width: 4,000 mm, volume flow: 26,000 m³/h, warranty duration: 12 months, inner dimension height: 2,700 mm, inner dimension length: 6,900 mm, inner dimension width: 3,900 mm, working height: 2,700 mm, Equipment: cabin, documentation/manual, ⭐⭐⭐⭐⭐ (5.0) Customer Rating – Quality that impresses! ⚡ Top Service – Fast Delivery – Reliable Support ⚡ ✈️ Plus shipping costs – Shipping available upon request ⏰ 48H EXPRESS DELIVERY available after a deposit! Regular delivery time varies between 1 business day and approximately 15 weeks depending on stock. 🔧 Please note: Additional options may extend delivery time. 📩 Ask the seller in advance whether your selected options are immediately available. 🛒 ►►► Buy now! ◄◄◄ 💸 Preserve liquidity – invest wisely! ✳️ We offer flexible financing options: ✔️ Hire Purchase ✔️ Leasing ✔️ Warranty Programs 📞 Contact us – we'll find the right solution for your budget! ✨ Powerful. Economical. Efficient. ✨ 📦 Immediately available in three standard sizes! 📌 Our three standard booth sizes are usually in stock and available for short-term delivery. 📌 If larger painting areas are required, we can combine standard booths modularly to create customized solutions – tailored to your space and process requirements! 🎨 PROTON WETLINE KKF-40-70-35 Top-of-the-line wet paint booth & drying system 📐 Technical specifications (inside / outside): Length: 6900 mm / 7000 mm Width: 3900 mm / 4000 mm Height: 2700 mm / 3500 mm Air treatment box: 1350 x 2900 mm 🔧 Features: 🌬️ Vertical airflow via full-surface ceiling supply air plenum – for even, dust-free painting 🚪 3-wing main door with viewing windows + service door with emergency locking in case of overpressure 💡 Shadow-free lighting, heat-resistant and compliant with standards ♻️ Recirculation system with controllable fresh air flap – rapid heating to 60–80°C 8–15 min 🔇 Low-noise, high-performance fans with constant airflow (0.30 m/s) 🛡️ Slight overpressure reliably protects against dust ingress 🔥 Heating system & efficiency: Riello G20 burner Heating output: approx. 200,000 kcal/h Efficiency: up to 99% High-temperature heat exchanger made of special steel Ltsdpfxsipvulj Aanea 🧼 Top-of-the-line filter technology: ✅ Pre-filter (tear-resistant, up to 100°C, DIN 53438-3 F1) ✅ Ceiling filter (EN 779: F5, polyester-coated) ✅ Floor filter (Paint Stop, G3, silicone-free) ✅ Activated carbon filter (DIN 24184, class G4) 🖥️ Intelligent control: Modern control panel for full control of ventilation, heating, lighting, and Safety – simple & compliant with standards 🖲️ Optionally available with touchscreen operation 🧱 Flexibly positioned air treatment units – can be mounted on the right, left, or rear of the cabin ➕ Optional equipment (for an additional charge): 🪟 Panoramic doors – fully glazed 🧱 Roof with additional insulation 🎨 Paint mixing station can be integrated 🌈 Color selection: Any RAL color possible (standard: blue, white, orange, red, gray) 💡 Explosion-proof lighting (Exproof) 🌪️ Explosion-proof fan (Exproof Fan) 🖥️ Touchscreen control ⚠️ Selecting optional equipment may extend delivery times. Please discuss your options with our sales team in advance. 🚧 Installation costs not included in the price. 📍 These depend on your location – we would be happy to provide you with a customized quote! ☀️ 2-YEAR WARRANTY – Better safe than sorry! ☀️ ⭐ Follow us for new offers & promotions! ⭐ PROTON Maschinenbau GmbH – Your partner for professional painting technology with over 40 years of experience.