Used Panda 400 for sale (18,974)

Condition: new, Year of construction: 2024, load capacity: 300 kg, Equipment: foot remote control, rotational speed infinitely variable, Protec KT 300 H welding turntable, 170/400 special version Horizontal load 300 kg, tilted 150 kg Power consumption 220 V, 50 Hz Table diameter 450mm Hollow shaft diameter 170mm Bsdpfx Asvbrqxelfsww Table height 500mm Welding current transmission 400 A Quick-action chuck diameter 300mm, surcharge 550.-€ Quick-action chuck diameter 400mm, surcharge 750.-€ Crank gear motor 0 - 90° stepless adjustment Infinitely variable speed 0.01 to approx. 5 rpm. incl. foot remote control Digital display with welding time limiter (if required)

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Bodpsuzn Nnofx Alfeww Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: new, Number of sanding units 1 St. Profile width 390 mm Bedpfeytx Ufox Alfsww Profile height max. 390 mm

Condition: ready for operation (used), Year of construction: 2012, operating hours: 41,150 h, travel distance X-axis: 650 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D sl, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 33,500 W, number of slots in tool magazine: 80, number of axes: 4, This 4-axis Starrag Heckert HEC 400 D was manufactured in 2012. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 80 tools, allowing for efficient machining operations. The machine includes two workpiece pallets with a size of 400 × 500 mm. If you are looking to get high-quality machining capabilities, consider the Starrag Heckert HEC 400 D horizontal machining centre we have for sale. Contact us for further details. • Temperature range: 5–35 °C • Operating hours: 41,150 hours • Spindle hours: 1163 hours • NCU type: NCU 710.2 • NC software version: V02.07.01.06 • MMC software: 07.06.02.02 • Standard software cycles: 07.05.11 • Tool magazine type: Chain magazine • Workpiece pallets: 2 • Pallet size: 400 × 500 mm Bwedpfx Aeyzn Dgjlfsw • Spindle torque: 200 Nm • Coolant pressure (option): up to 80 bar • Coolant tank capacity: 1350 l • Coolant flow (swivel shower): approx. 70 l/min • Axis measurement system: Heidenhain LC483 • Rotary axis measurement: Heidenhain RCN226 • Position frequency analysis X-axis: 29 Hz • Position frequency analysis Y-axis: 54 Hz • Position frequency analysis Z-axis: 52 Hz • Spindle + motor replaced: July 2025 Additional equipment • Vapour extractor: AFS 600spindle and motor replaced in July 2025 Technical Specification Taper Size SK 40

Condition: new, neu ca. 4 Monate ab Auftragse Italien 258000 € 400 to Bwedpfxsynmuvs Alfsw 500 mm 5.000 x 3.050 mm 700 mm 20 mm/s 2 mm/s 4500 mm 5000 mm 2600 mm 24000 kg horizontal verschiebbar 3050 mm 2.200 mm 3.600 mm Horizontal verschiebbarer Zylinder2.200 mm Hydraulisch beweglicher Ständer: 3.600 mm Bedienung über Handhebel sowie Bedienpanel Tisch mit integriertem Zylinder zum anheben des Werkstücks Ausrüstung gemäß CE Vorschriften Betriebsanleitung in DEUTSCH und ENGLISCH (Symbolfoto)

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 250 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 52 mm, spindle speed (max.): 1,810 rpm, spindle speed (min.): 65 rpm, spindle motor power: 2,200 W, total height: 1,650 mm, total length: 1,900 mm, total width: 830 mm, type of input current: three-phase, overall weight: 790 kg, Equipment: documentation/manual, Universal Lathe TORNADO 400 × 1000 – 2.2 kW / 400 V With Digital Readout and Work Light Key Features Precision spindle roller bearings The spindle is equipped with high-precision roller bearings that ensure excellent machining accuracy and reliable operation even during intensive use. High-quality hardened and ground steel gears in the headstock transmission All gears inside the headstock are made from high-grade steel, hardened and ground to ensure smooth, quiet operation and long service life. Easy and quick gearbox operation The intuitive gearbox design allows quick and convenient speed changes and easy adjustment of machining parameters. Powerful drive motor The machine is equipped with a sufficiently powerful motor that ensures stable performance even under heavy loads. D1-5 spindle mounting system The D1-5 camlock spindle system allows quick and secure installation of chucks and other accessories. Wide range of thread cutting capabilities The machine enables cutting of various thread types (metric, inch, module, and others), making it a versatile tool for many applications. Technical Specifications Turning Capacity Maximum swing over bed: 400 mm Swing over cross slide: 250 mm Swing in gap: 520 mm Distance between centers: 1000 mm Maximum workpiece length (chuck + tailstock): ~920 mm Slides and Travels Compound slide travel: 125 mm (0.02 mm accuracy) Cross slide travel: 240 mm (0.04 mm accuracy) Longitudinal travel: 750 mm (0.2 mm) Drive and Speeds Main motor power: 2.2 kW / 400 V Coolant pump power: approx. 40 W Spindle speeds: 18 ranges (I/II) 65 – 1810 rpm Threads and Feeds Metric threads: 0.4 – 7 mm Inch threads: 4 – 60 T.P.I. Module threads: 0.4 – 3 mm D.P. threads: 8 – 84 D.P. Longitudinal feed range: ~0.053 – 1.291 mm/rev Cross feed range: ~0.011 – 0.276 mm/rev Construction and Spindle Bed width: 218 mm Spindle bore: 52 mm Bedpeyr Ihlofx Alfsww Spindle taper: MT6 Spindle nose: D1-5 CAMLOCK Tailstock: Quill diameter: 50 mm Quill travel: 110 mm Taper: MT4 Dimensions and Weight Machine dimensions (L × W × H): approx. 1900 × 830 × 1650 mm Weight: approx. 640 – 790 kg (depending on configuration) Standard Equipment 2-axis digital readout (optical scales) 3-jaw chuck 200 mm + internal jaws set 4-jaw chuck 200 mm Faceplate 280 mm Steady rest Follow rest Dead centers MT4 – 2 pcs. Spindle reduction sleeve MT6 / MT4 Change gears set Coolant system Working light Lubrication pump Chuck key and toolpost wrench Set of service tools Safety guards compliant with CE standards Operating manual (English) CE Declaration of Conformity Delivery to the customer is possible. Shipping cost is calculated individually by the transport company.

Condition: new, Year of construction: 2025, functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 450 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 18 m/min, feed rate Y-axis: 18 m/min, feed rate Z-axis: 16 m/min, spindle speed (max.): 8,000 rpm, spindle speed (min.): 1 rpm, rapid traverse X-axis: 18 m/min, rapid traverse Y-axis: 18 m/min, rapid traverse Z-axis: 16 m/min, mount diameter: 120 mm, position of the milling head: pionowa, table length: 800 mm, table width: 320 mm, type of input current: three-phase, total height: 2,300 mm, total length: 2,100 mm, total width: 1,750 mm, rotational speed (max.): 8,000 rpm, rotational speed (min.): 1 rpm, overall weight: 2,600 kg, table load: 300 kg, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, rotational speed infinitely variable, Special Offer – 5% Discount Available! CNC Machining Center 500L The CNC 500L Machining Center is a compact and high-performance CNC milling machine designed for precision machining of metals and engineering plastics. Its rigid machine structure and precision linear guideways ensure excellent stability, accuracy, and reliability, making it ideal for both single-piece and batch production. Powered by a 5.5 / 7.5 kW spindle with speeds up to 8000 rpm, the CNC 500L delivers efficient machining across a wide range of materials. The 12-position automatic tool changer reduces setup time and increases productivity, while the intuitive CNC control system enables easy programming and operation. The machine also features through-spindle coolant, an efficient chip evacuation system, a chip conveyor, and a fully enclosed working area with LED lighting, ensuring safe, clean, and comfortable operation. An optional 4th and 5th rotary axis further expands its machining capabilities. Main Features • Rigid machine construction • Precision linear guideways • BT40 spindle up to 8000 rpm • 12-position automatic tool changer • High machining accuracy and repeatability • Through-spindle coolant • Chip conveyor and evacuation system • Fully enclosed working area • CE certified Technical Specifications • Model: CNC 500L • X-axis travel: 600 mm • Y-axis travel: 400 mm • Z-axis travel: 450 mm • Distance from spindle to table: 100–550 mm Bedpfxoy H Dnrj Alfeww • Table size: 800 × 320 mm • T-slots: 3 × 16 × 75 mm • Spindle speed: up to 8000 rpm • Spindle power: 5.5 / 7.5 kW • Spindle taper: BT40 • Linear guideways: 30 mm • Rapid feed X/Y/Z: 18 / 18 / 16 m/min • Cutting feed: 1–8000 mm/min • Positioning accuracy: ±0.02 mm • Repeatability: ±0.02 mm • Tool magazine: 12 tools • Maximum table load: 300 kg • Total power: 15 kVA • Machine dimensions: 2100 × 1750 × 2300 mm • Machine weight: 2600 kg • Power supply: Three-phase Standard Equipment • 12-position automatic tool changer • Through-spindle coolant system • Chip evacuation system • Chip conveyor • Full machine enclosure with LED lighting • UPS backup power supply for CNC control Optional Equipment • 4th rotary axis • 5th rotary axis Applications • Precision milling • Drilling • Tapping • Machining of steel, aluminum, plastics and non-ferrous materials • Tool rooms • CNC workshops • Manufacturing companies • Small-batch and serial production Transport and Delivery We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts, machine configuration, and comprehensive after-sales support. Contact us for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: good (used), Stock number: 2839 Make: WMW Year of manufacture: Machine number: 13539 Type / Model: SgB 400 Cutting range round: 420 mm square: 380 x 380 mm Saw blade: 700 x 55 x 2.5 mm Sawing speed: 42 / 52 / 68 / 84 strokes/min (?) Clamping jaws: fixed 280 x 230 mm movable 230 x 230 mm Clamping jaw opening: 450 mm electrically clamping Connection: 3.6 kW Accessories/equipment: Condition: good Weight: 1,4 t Bjdpfx Asrpl Suslfeww Dimensions: 1,900 x 700 x 1,400 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, conveyor belt width: 400 mm, conveyor belt speed: 450 mm/s, total length: 1,700 mm, total width: 600 mm, total height: 420 mm, overall weight: 110 kg, inner radius: 550 mm, outer radius: 1,150 mm, power: 0.37 kW (0.50 HP), motor manufacturer: SEW, TAF item number: 1000005238 Manufacturer: Dörr Year of manufacture: 2011 Overall dimensions (LxWxH): 1,700 x 600 x 420 Width incl. side panel in mm: 590 Bwsdpfx Alsivaimofjw Width incl. drive in mm: 600 Side height in mm: 150 inside - 225 outside Conveyor width in mm: 400 Curve (degrees): 90° Curve radius, inside: 550 Curve radius, outside: 1,150 Belt type: PVC, smooth Belt width in mm: 500 Sliding surface: steel Running direction: right Drive: centre station Motor type: gear motor Motor data: SEW 0.37 kW Conveyor speed in m/s: 0.45 m/s Net weight in kg: 110 Condition: used / fully functional Function test: OK

Condition: excellent (used), mileage: 9,23,287 km, power: 294 kW (399.73 HP), first registration: 09/2007, fuel type: diesel, axle configuration: 8x2, wheelbase: 6,970 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 10,480 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 11,500 kg, Equipment: crane, General information Year of construction: 2007 Cab: single Registration number: BT-HH-39 Bwjdpfxszd Huto Alfsw Technical information Number of cylinders: 6 Engine capacity: 12.780 cc Axle configuration Front axle 1: Max. axle load: 9000 kg; Steering Front axle 2: Max. axle load: 9000 kg; Steering Rear axle 1: Double wheels; Max. axle load: 11500 kg Rear axle 2: Lift axle; Max. axle load: 7500 kg; Steering Weights Empty weight: 26.264 kg Carrying capacity: 10.910 kg GVW: 37.000 kg Max. towing weight: 50.000 kg Functional Extendable superstructure: Yes Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, For sale is a Kaltenbach saw, type: KKS 400 E, first owner. The machine was purchased new by us in 2008 and has been in our possession ever since. Included in the sale are two roller conveyors (1 left and 1 right) and two used saw blades. It is fully operational and can be demonstrated under power after prior arrangement. Type: KKS 400 E Year of manufacture: 2008 Equipment number: Operating voltage: 400 V Frequency: 50 Hz Control voltage (DC): 24 V Valve voltage (DC): 24 V Total rated current: 9 A Supply line fuse: 16 Roller conveyor left = 5000 mm Roller conveyor right = 6000 mm with length stop Technical data saw KKS 400 E Weight: 820 kg Dimensions W/L/H: 800-1070-1780 mm Saw blade diameter: Standard 400 mm Saw blade types: HSS solid steel saw blade HSS segmented saw blade Saw blade mounting according to DIN 8576 Mounting bore: 50 mm Number of drive pins: 4 pieces Pitch circle of drive pins: 80 mm Diameter of drive pins: 13 mm Saw blade feed speed Continuously adjustable: 0-1000 mm/min Rapid return: 1550 mm/min Rotary table adjustment: manually – continuously +/- 90 degrees Cutting speed with 400 mm blade diameter Two-stage with chain: 10/20 m/min Bodpfx Als Adqtdofjww or 13/26 m/min or 15/30 m/min Electrical connection value two-stage with chain: 1.7/2.6 kW Documentation: Original operating manual is complete. EC declaration of conformity available. Note: The machine is only sold as a complete package together with the two roller conveyors. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: Dismantling, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical data according to available documents. Subject to prior sale. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2002, The machine is in good condition. Bedsz Tdbzspfx Alfoww

Condition: used, functionality: unexamined, total length: 260 mm, total width: 360 mm, total height: 210 mm, Ferwood Code: RU0012095 - Manufacturer Code: 6ES7422-1BL00-0AA0 - Condition: Used - Functionality: Not tested - Compatible Machine: HOLZMA PANEL SAW - If interested, we offer a refurbishment service, please contact us. Bjdsz Iyl Djpfx Alfeww

Condition: good (used), Year of construction: 1993, functionality: fully functional, travel distance X-axis: 212 mm, travel distance Z-axis: 640 mm, total height: 1,730 mm, total length: 4,530 mm, total width: 1,940 mm, overall weight: 5,200 kg, Gildemeister CTX 400, CNC turning machine. The machine is in good, well-maintained condition. Manual included. Machine with EPL2 programming. Travel distances: Z-axis = 640 mm X-axis = 212 mm Max. turning diameter over the bed: 500 mm Data: Bwsdpfxj Ad H Ukj Alfew - Year of manufacture: 1993 - CNC control: EltroPilot L2 - 12 tool stations - Spindle power: 22 kW - Rapid traverse X-axis: 10 m/min - Rapid traverse Z-axis: 15 m/min - Speed range: 25 - 5000 rpm - Chip conveyor GB 25L 38L (discharge height 1100mm, belt width 225mm, feed height 250mm) - Double foot switch - Machine weight (with chip conveyor): approx. 5.15 tons - Dimensions with chip conveyor (W x D x H): 4.53 x 1.94 x 1.73 m The machine can be inspected at any time. The sale is only to business customers and is without guarantee or warranty. You will receive an invoice with the currently applicable VAT. The machine can be loaded.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 230 mm, turning length: 1,000 mm, turning diameter: 420 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this well-maintained and very well-preserved VDF Boehringer DUS 400 TI CNC lathe, manufactured in 2003. It functioned excellently up until its shutdown in August and is in first-class condition, apart from some paint damage. It is being sold solely due to the closure of our business. • Spindle motor power: 11 / 9 kW • Control system: SIEMENS 840D Bwode Acdwgjpfx Alfew • 3-jaw wedge-bar chuck (RÖHM Duro T200) - retrofitted in 2019 • Control system: SIEMENS 840D • Coolant tank (emulsion) A quick-change system is installed, and many tool holders with tools are included in the scope of delivery. Additionally, a collet chuck for the spindle and drill chucks and ball centers for the tailstock are included, as well as some spare indexable inserts. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, clamping force: 250 kN, injection pressure: 6 bar, plate length: 950 mm, plate width: 50 mm, plate height: 400 mm, total length: 1,500 mm, total width: 550 mm, total height: 1,000 mm, overall weight: 300 kg, Manually operated filter press, entirely made of stainless steel. Bjdpfxo Adqado Alfsww

Condition: used, Year of construction: 2008, offer consists of: laminating machine Gemini C 400 A with jogger - developed for a digital printing machines outputs lamination - pneumatic system of laminating rollers pressure with an easy thrust control - Anti-Curl-Mechanic Technical details: - feeder: flatpile feeder; loading height: 230mm - Format: min. 320x250mm; max. 380x580mm - Paperweight: 115-350g/qm - film: 20-45 µm - film-types: OPP, Nylon - Inner diameter roll: 70-80mm - outer diameter roll: max. 400mm - capacity: 0-15m/min; max. 1800 sheets/h with Format B3 - warming up time: approx. 10 Min - weight: 365kg - power supply: 230 V, 2,3kW, 16A - floor space: : 74 x 280 cm Bwsdpfx Aozpwkvjlfow We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2004, Manufacturer: CFS Model: MLF400 Year: 2004 Condition: Used Serial number: 2279 Stock number: 3447J Belt width: 400 mm Capacity: max 50 cycles/min Hopper: 270 liters Belt speed: 1.5 - 15 m/min Bwjdpfx Asz I Svuelfjw Power: 3 x 400V, 50Hz, 7.8kW Dimensions: 3650 x 1000 x 2600 mm Weight: 1186 kg With stick inserter SA4180-193 and a 1500 mm discharge conveyor. Includes an additional 900 mm discharge conveyor and an accessories cart. With a BVP bridge breaker in the hopper.

Condition: excellent (used), Year of construction: 2012, operating hours: 43,000 h, Arburg 470-1500-400 injection molding machine, manufactured in 2012, in very good technical and visual condition, fully operational. Used for processing PP. Injection unit: Screw diameter: 40 mm Injection volume: 184 g Injection pressure: 2000 bar Clamping unit: Clamping force: 150 tons Distance between tie bars: 470x470 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Bodpfx Aez Rkcyolfjww Additional equipment: Very good technical condition Euromap 12 Robot interface 1x hydraulic core 1x air ejector Hardened injection unit - bimetal

Condition: new, Year of construction: 2026, SUPERTOOTH jaw plate set for Pegson XA400S / XR400S and Powerscreen 400 / R400 This listing is for a complete set of SUPERTOOTH-profile jaw plates. The set is suitable for the following jaw crusher models: Bjdpfx Asz Dudyelfeww Pegson XA400S Pegson XR400S Powerscreen 400 Powerscreen R400 The set consists of: Fixed jaw plate — part number CR005-068-001C, weight 1000 kg. Swing jaw plate — part number CR005-067-001C, weight 1100 kg. Material composition: 18% manganese, 2% chromium, balance iron. The chemical composition has been verified using a spectrometer. Price per set, EXW Poland. Worldwide shipping can be arranged. Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others.

Condition: ready for operation (used), Year of construction: 2024, operating hours: 766 h, clamping force: 400 kN, screw diameter: 18 mm, Hydraulic injection moulding machine manufactured in 2024. This Arburg Allrounder 270 C 400-70 features a clamping force of 400 kN and a maximum specific injection pressure of 2738 bar. It includes a mould height range of 160 - 475 mm and a distance between tie bars of 280 x 280 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 270 C 400-70 machine we have for sale. Contact us for further details. Bwedpjz Eq S Njfx Alfew - Max. Specific Injection Pressure: 2738 bar- Max. Swept Volume: 28 cm³- Mould Height: 160 - 475 mm- Distance Between Tie Bars: 280 x 280 mm- Centering Diameter (Ejector/Nozzle): 110 mm / 125 mm- Operating Hours (Pump): 766 hrs- Core Pull: 1- Heating Control Circuits: 3 electrical heating control circuits for mould heating, max. 2 kW/230 V- Cooling Circuits: Programmable machine-related cooling circuits, cooling water distribution with 3 free circuits (DN 13)- Nozzle Specifications: Open nozzle 18 mm with M 24x1.5 internal thread, flat nozzle tip, nozzle heating band- Control System: SELOGICA direct control with 15-inch (38.1 cm) touchscreen user interface- Connectivity & Interfaces: Basic Connectivity (CPU Ethernet port, IIoT Gateway), EUROMAP 67 robot interface (50-pin), EUROMAP 65 chip card operating authorization, CompactFlash & USB interface, Printer interface (serial USB), Interface for colouring/dosing unit

Year of construction: 2021, condition: new, functionality: fully functional, machine/vehicle number: 1 падон, The Colombini TA 250-400 industrial coffee grinder and pulverizer is a device designed for continuous production, direct feeding of packaging machines, and operation in multiple shifts. Specifications: * Output: 200 to 400 doses per minute (capsules or filter bags). * Power consumption: total power 9 kW (operating power 3–4 kW). * Weight: approximately 220 kg. Features: * Discs made of tungsten carbide. * Grind adjustment directly during operation. Bwedozrnq Eepfx Alfow * No cooling system.

Condition: good (used), Year of construction: 2004, operating hours: 92,947 h, load capacity: 400 kg, arm reach: 2,550 mm, IRB 7600 is ideal for heavy applications, regardless of industry. Typical uses include handling heavy fixtures and parts, turning car bodies, lifting engines, in foundries or forges, and loading and unloading machine cells. It can also be used to lift large, heavy pallet layers. Characteristics such as high available torque and inertia capability, rigid design, and powerful acceleration have earned this market leader its “Power Robot” title. Please note that the price does not include shipping costs. Year: 2004 (Multiple options and bulk buying discounts available) Type: Foundry Cabinet: NOT Included (Works with M2000) Teach Pendant: NOT included but we can try to find one for you Signalling & Power Cables: NOT Included but we can try to find them for you Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. Bwjdpfx Ajq Ap Ddjlfow (Source: ABB's Website)

Condition: ready for operation (used), For sale is a Nikken CNC 400 rotary table in very good condition! It is configured for a Mazak M32 control but can be adapted as needed. Table diameter: 400 mm. Dimensions (L/W/H): 740/240/420 mm. If you have any further questions, feel free to contact me. Bedpfxeya Dtme Alfeww

Condition: good (used), Year of construction: 2002, Heckert CWK 400 D, year 2002, Siemens 840 D control, X/Y/Z travel 650/650/650 mm, 240-position tool changer, HSK 63 spindle taper, spindle speed up to 10,000 rpm, internal coolant supply 30 - 50 bar, NC rotary table Ø 460 mm, six-pallet changer 500 x 400 mm, chip conveyor, new spare spindle, 25 HSK holders. Bwedpfxsw Uf Hkj Alfow