Used Panel Rip Saw for sale (18,537)

Condition: good (used), Year of construction: 2011, machine/vehicle number: 241.186, functionality: fully functional, input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, cutting width (max.): 3,300 mm, saw blade diameter: 350 mm, Equipment: saw blade guard, For sale is a professional and efficient panel saw, IMA Schelling model FT4 330. The machine is currently in operation at a custom furniture manufacturing facility. It has been regularly serviced and is ready for immediate use. It is used for cutting particleboard, MDF boards, and kitchen countertops. Key information and technical condition: Year of manufacture: 2011 Power: 15 kW Power supply: 400V (3 phases) 50Hz Condition: good, in continuous operation Gedpfxszvyc Us Ag Ssuh Usage history: the saw has been used in a single-shift operation, 8 hours per day.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, type of input current: three-phase, cutting height (max.): 2,200 mm, cutting width (max.): 4,100 mm, saw blade diameter: 250 mm, height adjustment type: pneumatic, actuation type: pneumatic, total length: 4,100 mm, total height: 2,200 mm, overall weight: 700 kg, Equipment: CE marking, scorer, Available from the last week of August. We are offering this very well-maintained Holzkraft VPS 2241 VR ED vertical panel saw, manufactured in 2022. The machine was installed and put into operation at our facility in May 2023. Holzkraft VPS 2241 VR ED – vertical panel saw (commissioned in 2023, excellent condition) The machine is connected and can be tested. Selling my vertical panel saw, Holzkraft VPS 2241 VR ED, purchased and assembled new in 2023, and therefore in very good condition. Selling due to expansion. Features & Highlights: Gujdpfoyxv T Rox Ag Ssh • Scoring device for clean, tear-free cuts • Digital measuring displays (horizontal & vertical) • Panel positioning on movable rollers (no lifting required) • Pneumatic locking of the saw carriage • Vertical/horizontal switching • Robust, torsion-resistant machine frame • Integrated dust extraction for direct connection to a dust extraction system The machine runs perfectly, no defects. Technical Data: • Cutting length: 4100 mm • Cutting height: 2200 mm • Cutting depth: 60 mm • Saw blade: Ø 250 mm • Motor: 3 kW / 400 V • Weight: approx. 700 kg Condition: • Year of manufacture 2022 / Installation: 2023 • Low usage • Ready for immediate use If you have any questions or require more information, please send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 2561, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, Panel saw Lead MJ-45TB, manufactured in 2025. Sliding table 3200 x 405 mm, motor power 5.5 kW + 1.1 kW, main saw speed 3000 / 4000 / 5000 rpm, scoring saw speed 9000 rpm. Maximum cutting height 120 mm (90 degrees) and 75 mm (45 degrees). Saw blades 315 x 30 mm and 120 x 20 mm, automatic lifting and manual tilting, large extraction hood. 400 V / 50 Hz three-phase connection, CE version. Gujdpfx Agez Ngi To Seh

Condition: used, Graule AGT combined pull-through and table circular saw. The pull-through saw can be tilted and swivelled. The machine can also be used solely as a pull-through saw by removing the table. Cutting height 85/40 mm Technical data: - Cutting length: max. 380 mm Gjdpfx Agezryu No Ssuh

Condition: good (used), Year of construction: 2003, Maximum cutting Width : 4300 mm Maximum cutting Lenght : 4300 mm Maximum cutting hight : 95 mm Main engine : 13,5 Kw Scoring unit : 2,2 Kw Saw carridge feed rate : Variable 1 - 150 m/min Pusher feed rate : up to 90 m/min Control system : CADmatic 4.0 Gjdpez Hx Egsfx Ag Sjuh 4 x air table in front of the machine Machine is dismantled and ready to load

Condition: good (used), Year of construction: 1992, Panel saw with strip curtain max. cutting length 4200 mm max. cutting width approximately 1000 mm Motor 11 kW with electric width adjustment and digital display for width stop new strips will be supplied Gjdpfx Agezq Rh Do Seuh available at the location in working condition

Condition: new, Year of construction: 2025, Panel Saw ALTENDORF F 35 Type 3 - 1000 with Scorer 7.5 kW (10 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle/miter fence Digit-L, Table extension/table width extension, Gujdpexyl Ecefx Ag Sjh With proven CDF surface ----- Technical Data ----- Swivel range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 7.5 kW, Screen size: 15 inch, Working table height: 910 mm, Extraction connection Ø: 80 + 120 mm Equipment: Altendorf F 35 Type: III - 1000 7.5 kW (10 HP) 3 speeds (M51064) Angle/miter fence Digit L option (M44154) Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, ALL ALTENDORF F25 TYPES READY ON STOCK! manual hight and Stilding adjustment for saw aggregate 0 – 46° digital display for saw blade height and tilting angle motor 5,5 kW saw blade speed 3600/ 4200 U/min. sliding table length 3200 mm angular fence for cutting length up to 3450 mm prearrangement for retrofitting of scoring unit saw blade DM max. 315 mm max. cutting height 104 mm max. cutting height at 45° = 70 mm working height 880 mm Gusdpsg Dgr Hefx Ag Ssh Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Code: 0353 Brand: SCM Model: SIGMA 85 KC - CE Standard Electronic horizontal panel saw with clamps for precise cutting of panels, suitable for joinery, furniture, custom made furniture, doors, kitchens, plastics, composite materials and various – CE Standard Technical data: Cutting length 3200 mm Cutting width 3200 mm Blade projection 85 mm Blade carriage feed speed 6–30 mt/min Gujdpfxjy A Svps Ag Sjh N°7 panel clamps to ensure the pack is held securely in place Main blade diameter 350 mm Hole 80 Main blade motor 11 Kw Main rotation speed 3900 rpm Scoring unit diameter 160 mm - Hole 55 – Motor 1,5 kW Automatic aligner: ensures precision during cross-cuts, reducing processing times N°3 front panel support surfaces Suction inlet diameters: n° 2 diameter 120 - n° 1 diameter 150 Compressed air 7-8 bar Overall dimensions of assembled machine mm 5700 x 4350 x 1700 h Weight kg 3300

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 Partnership Edition General features: - Aluminium machine and extension tables - Saw unit tiltable up to 46° - Pressure beam including LED lighting with 3 different status colors: WHITE: Machine in idle position Gjdpfxezmf Iqs Ag Sjuh RED: Pressure beam lowering or emergency stop function BLUE: Saw unit moving; variably positionable support table 1,000 x 500 mm - Scoring system using main saw blade in the same direction of rotation - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel including: saw blade holder, template holder, emergency stop button, start button, selector switch Scoring/grooving saw, rotary switch for feed speed, switches for laser (option) and USB socket Partnership Edition includes: - Motorized rip fence with 4 aluminum stops, synchronized positioning. All four stops adjustable up to 1,300 mm. The table is approx. 2,000 mm long. - Windows 10 screen control (10'' touchscreen). The graphical interface offers the following functions: tool database, miter cut calculation at the length stop, cutting plans can be created and saved, programs can be saved, exported, and imported via USB. - Telescopic stop extendable to 3,400 mm including 2 digital displays Technical data: - Max. saw blade protrusion 350 mm blade: 100 mm at 90° / 70 mm at 45° - Saw blade: diameter 300 – 350 mm, bore 30 mm - Saw blade speed: 4,000 rpm - Motor: 5 kW (approx. 7.5 hp) - Feed speed: 0 – 40 m/min - Overall length: approx. 4,250 mm - Weight: approx. 1,300 – 1,700 kg (depending on cutting length and equipment) - Required air pressure: 7 bar - Extraction ports: 1 x 100 mm, 1 x 120 mm Includes: - Motorized rip fence with 4 aluminum stops, adjustable up to 2,100 mm instead of 1,300 mm - Cutting line laser - Saw motor with 7.5 kW (10 hp) including automatic star-delta startup - Programmable saw blade height adjustment including height correction when tilting the saw unit - Mitre fence tiltable +/- 50° with length compensation Location: Flörsheim am Main Availability: by arrangement

Condition: good (used), Year of construction: 2014, input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 2,100 mm, cutting width (max.): 4,200 mm, Equipment: CE marking, documentation/manual, saw blade guard, For sale: Complete vertical panel saw system suitable for acrylic, plexiglass, plywood, and wood-based panels, along with a heavy-duty dust collection system. Fully operational. Gjdpfxezqd Idj Ag Souh • Panel Saw: MAKK / Bala Makina Vertical Panel Saw • Dust Extractor: Pettini Franco E.S. Model E.F. 500.B (Year of Manufacture 2014) • Applications: Cutting acrylic, plastic sheets, plywood, MDF, and chipboard. • Includes: Vertical cutting frame, saw head, dust extraction tower with collection bags. (Note: blow gun attachment on the table is not included).

Condition: excellent (used), Technical data: • Cutting length: 3800 – 4500 mm • Cutting height: up to 115 mm • Main saw blade diameter: 400 mm (optional 430 mm) • Scoring saw blade diameter: 215 / 300 mm • Saw blade arbor: 75 mm (main saw blade), 50 mm (scoring saw blade) • Speed: • Main saw blade: approx. 3695 rpm • Scoring saw blade: approx. 4565 rpm Gujdpsy Syauefx Ag Soh • Motor power: • 7.5 – 13.2 kW (50 Hz) • up to 15.9 kW (60 Hz) • Feed rate: 0 – 130 m/min • Return speed: 130 m/min • Air pressure: 5 – 6 bar • Air consumption: 10 – 30 l/min • Extraction: • Connection: 115 / 200 mm • Flow rate: 1215 – 3675 m³/h

Condition: excellent (used), Year of construction: 2019, Sawblade tiltable 45 ° Length of the rolling table 2500 mm Gjdpfxsz E Sv Nj Ag Souh cutting width 1250 mm Motor output 4,0 kW Cutting height 90 mm Speed 4000 / 6000 U/min. weight of the machine ca. 650 kg

Condition: used, Year of construction: 2004, Cut capacity 3300mm length x 2050mm vertical or 1960mm horizontal 300mm max blade dia 80mm max depth of cut 3kw motor Unbraked rolllers for panel handling Precision guide rails for saw unit Saw beam locking TRK front and rear extraction Gsdpfxsz Hzgmj Ag Seuh Overall floor area [ freestanding on legs ] 4451mm long x 2859mm high x 1598mm wide. Serial nr - 35111 Year - 2004 CE [purchased refurbished 2021]

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Gjdjz Ehvxspfx Ag Souh

Condition: ready for operation (used), Year of construction: 2008, Holzma automatic panel saw PROFI HPP 510/56/56/P Year: 2008 Technical data Positioning accuracy +/- 0.1 mm 5 air cushion tables, 2,810 x 650 mm 1 fan, adjustable pressure Cutting length: 5,600 mm Cutting width (pusher travel): 5,600 mm 11 combination profile rails, dual-track 9 clamps, two-finger type Max. cutting height: 125 mm Saw carriage feed (forward): 0.1 – 150 m/min Saw carriage feed (return): constant 150 m/min Gedpfoz Iliuex Ag Sjuh Pusher feed (forward/return): max. 90 m/min 11 combination profile rails, dual-track Max. forward speed of 25 m/min is mandatory within the EU Automatic pressure beam height control Main saw motor (frequency-controlled): 21 kW Speed: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz (+10 / -5%) Connected load: 30 kW Working height: 1,020 mm Main saw blade: 450 x 4.8 x 60 mm Scoring saw blade: 180 x 4.8 – 5.8 x 45 mm Compressed air: 6 bar Air consumption: 210 NL/min (approx., at extraction port) 30 – 32 m/s Negative pressure: 1,200 Pa Extraction volume: 5,800 m³/h Chip duct connection: 1 x 200 mm Pressure beam connection: 2 x 150 mm Quality standards: CE tested, GS tested, FPH dust-tested. Stock no.: 2003040BX

Condition: good (used), Year of construction: 2002, Striebig panel saw Evolution 6224, manufactured in 2002 Type 6224 Year of manufacture: 2002 Motor: 5.5 kW Cutting length: approx. 5300 mm Cutting height: approx. 2100 / 2240 mm Digital display in the Y-axis Center support Cutting depth: 80 cm Saw blade diameter: approx. 303 mm Wall mounting Adjustable slat grid Wooden back panel Dust extraction connection: D 120 mm Space requirement: approx. 6300 mm x 1250 mm x 2720 mm Gsdpjzuyf Tsfx Ag Souh Weight: approx. 1200 kg Total connected load: approx. 5.5 kW Location: available from warehouse 54634 Bitburg, free loading, unpacked Handover in the current condition as inspected without warranty

Condition: good (used), Year of construction: 2018, functionality: fully functional, Equipment: CE marking, scorer, Horizontal panel dividing saw / Horizontal panel saw with lifting table feed Manufacturer: SCM / Gabbiani Type: Gabbiani ST 115 Year of manufacture: 2018 Horizontal beam saw with lifting table feed from the rear, originating from a parquet factory. Cutting length approx. 3200 mm Cutting depth on the lifting table approx. 1850 mm Max. stack height on the lifting table (with supports) approx. 600 mm Saw blade projection 115 mm Variable saw carriage speed 0 - 135 m/min. Variable sliding table speed 0 - 70 m/min. Motor of the main saw blade approx. 9 kW Main saw blade speed 3900 rpm Saw blade diameter 400 mm Motor of the scoring saw approx. 1.8 kW Scoring saw speed 6300 rpm Scoring saw blade diameter 160 mm 6 clamping devices (3 of which with front aligner) Guodpjzyx Evsfx Ag Seh 2 air cushion tables, each with blower Voltage: 400 V, 3 phases, 50 Hz, 43 A Weight approx. 5500 kg Data partially estimated and taken from the brochure.

Condition: like new (used), functionality: fully functional, power: 7 kW (9.52 HP), saw blade diameter: 305 mm, total length: 3,100 mm, total width: 3,100 mm, overall weight: 3,000 kg, cutting length (max.): 3,100 mm, cutting height with scoring (max.): 70 mm, feed rate X-axis: 40 m/min, feed rate Z-axis: 50 m/min, space requirement length: 3,100 mm, space requirement width: 3,100 mm, Equipment: rotational speed infinitely variable, scorer, Panel Sizing System SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a high-performance, electronically controlled panel saw designed for precise, efficient, and automated cutting of wood-based materials. Ideally suited for industrial applications in joineries, furniture production, and panel processing. Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and dust-tested (limit value < 2 mg/m³) Key Technical Data & Equipment: - Rip saw FM 20-3100 with hardened guides - Automatic forward & return travel of the saw unit (automatic lowering during return) - Feed drive via three-phase gear motor, frequency inverter controlled - Feed speed: 2 – 40 m/min (stepless) - Return speed (rapid traverse): 50 m/min - Extraction channels in machine base & pressure beam - Score saw blade adjustable externally (without opening the hood) - Safety hood locking with lamella curtain SZ 5008 - 3-step cutting height adjustment LA 4143 Gujdpfx Agowrn Efo Sjh - 6 cut-out sections in the pressure beam for residual cuts down to 5 mm - Saw motor: 7.0 kW | Scoring motor: 1.1 kW (switchable) - Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: - Angle pressure device WP 5003 with clamping claw for cross cuts - Adjustment range: 2400 mm - Fully automatic control via DNC-AT - Material feed table HP 5091 - 2 upper guides, rack-and-pinion guidance - Servo drive for material pusher - Feed speed: 25 m/min (safety limited) - Return: 40 m/min - 6 clamping fingers, 4 double roller tracks - Table length: 3100 mm | Fence depth: 3150 mm - Closed Pertinax surface in the area of the angle fence Control & Operation: - Operating system: Ubuntu Linux - Integrated PC with hard disk, parallel & serial interfaces - Network capable (LAN/WLAN), remote maintenance via internet (TeamViewer, Remote Desktop) - USB printing function - Multilingual dialog programming - 15" flat screen, multifunction keyboard on a swiveling control console - Graphic display of cutting plans and processes Software / Programs: - OPTIMAX: Office optimization, waste calculation, material requirements - OPTIMIN: Direct optimization at the machine PC with parts list entry - Processing via USB, diskette or online (optional) - Manual, automatic & special operation modes (e.g. grooving, veneered parts) Additional Equipment: - Angle fence table HP 5085: 1,720 x 800 mm | Pertinax overlay - Workpiece support table HP 5025: 1,720 x 800 mm | Pertinax overlay - Air cushion system LK 5030 integrated in both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, tapered Reliability in Continuous Operation: This machine is in use worldwide – under extreme conditions. Whether in the dry climate of Africa or in high humidity regions of Southeast Asia (e.g. Thailand): The PA 4136 runs reliably in 3-shift operations – 365 days a year – and stands out for its outstanding stability and durability. Warranty: We are so convinced of the quality and stability of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electronic supply parts and wear parts.) 📞 Contact us for an individual offer or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning, and training available upon request.

Condition: used, Striebig Automat TRK 6220 AV vertical (floor-standing) panel cutting saw with Schneeberger Positron positioning control for the precise horizontal and vertical cutting of wood-based, plastic and composite panels. Can be freestanding or wall-mounted. The machine operates with manual feed; the automatic feed function is currently not operational. Technical data: - Cutting length: 5,300 mm - Cutting width: 2,200 mm - Material thickness: max. 80 mm - Motor: 5.5 kW Godpfszr H Hfex Ag Souh

Condition: good (used), Year of construction: 1985, machine/vehicle number: 13981, functionality: fully functional, power: 4.4 kW (5.98 HP), cutting height (max.): 2,200 mm, cutting width (max.): 5,300 mm, saw blade diameter: 300 mm, saw blade bore: 30 mm, rotational speed (max.): 4,750 rpm, total length: 6,300 mm, overall weight: 1,000 kg, Equipment: saw blade guard, Type: Standard 6220 A, Machine No.: 13981, Cutting capacity: 5300 x 220 x 80, Power: 380 V / 50 Hz / 9.2 A, Saw blade: 300 mm, Digital display: vertical and horizontal. Guodpfx Aozzym Deg Soh

Condition: used, Year of construction: 2022, - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm Godpfxozuyl Ts Ag Seuh - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t Panel dividing saw Manufacturer: Biesse Type: Selco WNT 630 Year of manufacture: 2022 Technical data - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t The machine is almost new and has only been used for a few months. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: good (used), Year of construction: 2010, Striebig Panel Saw Compact 5220, Year of Manufacture 2010 Godpfxozhx A Re Ag Seuh Robust, self-supporting, firmly welded, and torsion-resistant saw frame Stable, durable saw beam steel construction Robust bearing of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.9 kW motor (5.3 HP) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; Hvertical: 2200 mm, Hhorizontal: 2100 mm Equipment: - Compact 5220 - Strip fence - Mechanically braked support rollers - Freestanding support complete Location: Available from stock in 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2005, total length: 4,310 mm, total width: 1,200 mm, total height: 2,450 mm, Colour: Grey Weight: 485 kg - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 25005630 - Max. cutting height horizontal [mm]: 1550 - Max. cutting width [mm]: 3300 - Max. cutting depth [mm]: 55 - Min. saw blade diameter [mm]: 250 - Max. saw blade diameter [mm]: 250 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Current consumption [A]: 6.6 - Fuse [A]: 16 - Power [kW]: 3.0 - Transport dimensions: 4310mm x 1200mm x 2450mm (l x w x h) - Transport weight [kg]: 485kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gujdpfx Aezh Ikqog Ssh Yorick Diebels

Condition: good (used), Year of construction: 1998, Striebig Automat III TRK, manufactured in December 1998 Technical details: Power: 4.4 kW (5.98 hp) Input voltage: 400 V Input current: 12 A Cutting height (max.): 2,200 mm Cutting width (max.): 4,300 mm Saw blade diameter: 300 mm Speed (min.): 4,750 rpm Overall length: 5,400 mm Total weight: 1,000 kg Godeznncmjpfx Ag Souh Location: available from stock in 54634 Bitburg - immediately available -