Panel saw

SCM SIGMA 85 KC

Condition: used, machine/vehicle number: 008186, Max. panel width: 3200 mm Max. panel length: 3200 mm Main saw blade projection: 110 mm Dsdpfx Aljxaudzj Aeck No of Grippers: 11

Condition: as good as new (ex-display), functionality: fully functional, Panel saw ALTENDORF HAND GUARD latest software 7/26 TwinFlex edition with 12" touchscreen, double sliding table, adjustable on both sides, manual parallel fence adjustment, parallel fence with fine adjustment, control panel at eye level, adjustable, dimension input via touchscreen, F 45 ElmoDrive control system, electric height adjustment, electric tilt adjustment, AKE tool clamping system, automatic correction of cutting height, when the saw unit is tilted, easy axis calibration, machine diagnostics, operating hour counter, USB interface, dust-proof ----- Technical data ----- Swivel range: 0 - 46 °, Cutting length: 3,000 mm, Cutting width: 1,000 mm, max. saw blade diameter: 450 mm, max. saw blade overhang: 150 mm, angle stop with fixed position: 90 °, manually adjustable via measuring scale: 3,200 mm, speeds: 3,000 / 4,000 / 5,000 rpm, motor power 400 V: 7.5 hp / 5.5 kW, screen size: 12 ", machine height: 91 cm Optical protection system: Two cameras collect data for hand recognition from a wide area around the saw blade. As soon as hands are detected in that area, the saw unit is quickly lowered and quickly stopped within a quarter of a second. EDITION TWINFLEX - Double sliding table 3,000 mm - Saw blade overhang 150 mm - Motor power VARIO 5 kW (6.8 hp) - Adjustable on both sides - Angle miter stop DIGIT LD, cutting length up to 3,200 mm - CNC parallel fence, cutting width 1,000 mm - On/off switch on the double sliding table - Template holder - Surcharge for motor power 6.5 kW (8.8 hp) ALTENDORF with VARIO, for adjustment on both sides - Scoring unit 2-axis, 2-sided, ALTENDORF with motorized height and side adjustment Scoring blade height programmable - Quick lowering and quick lifting, - Drive motor 0.75 kW (1 hp), 8,200 rpm. - Scoring system RAPIDO 180 mm ALTENDORF for adjustment on both sides - LED lighting on the scoring unit ALTENDORF - Double sliding table 3,400 mm, ALTENDORF Dedpfx Aezgwl Iol Aeck - CNC parallel fence, 1,300 mm, ALTENDORF - Camera arm, can be swivelled out of the way ALTENDORF - Front support roller ALTENDORF Width 300 mm - Air cushion table ALTENDORF - Table extension 840 mm ALTENDORF with air cushion - HandGuard 2025 new version The machine is sold with a new warranty of 1 year. The machine can be purchased at an absolute special price. We would be happy to make you an offer.

Condition: as good as new (ex-display), Year of construction: 2026, Striebig CONTROL Type 6224 Cutting Area: L: 5300 x Hvertical: 2240 / Hhorizontal: 2100 x D: 80 mm Technical Data: Saw weight: approx. 1,200 kg Dcedpfx Aoy Ehnyel Ask Cutting depth: 80 mm Saw motor power: 5.5 kW (7.5 HP) Saw blade diameter: 300 mm Saw blade bore: 30 mm Emission sound pressure level at workstation LpA: 89.5 dB Saw blade speed: 4,800 rpm 2 extraction ports Ø 140 mm Compressed air connection: 6-10 bar Connected load: 7.3 kW (max 10.7 kW) Power supply: 3 x 400 V / 50 Hz Continuously adjustable scoring saw unit (VSA) Small parts made of aluminium Free-standing support complete, type: 6 ExpertCut Machine data provision (Industry 4.0 ready) Striebig Service Data Import / Label Layout Customized configuration of data import interface and label layout. The customer’s .csv file is checked and tested with the import drivers for cutting optimization. The label layout is adapted and prepared to customer requirements. Location: ex-stock 54634 Bitburg - Immediately available -

Condition: used, machine/vehicle number: 008377, X axis working area: 3390 mm Y axis working area: 1570 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Dcjdjx Swb Ajpfx Al Aok Number of controlled axes: 4 axes Total number of drilling spindles: 32 Total number of tool changer positions: 10

Condition: ready for operation (used), Year of construction: 2007, controller model: CADmatic 4 - Professional, This HOLZMA HPP 380 panel saw was manufactured in 2007. It features a robust steel saw carriage, main and pre-cut saws, and a patented Central Angle Return Device that reduces cycle time by up to 25%. The machine is equipped with a Power Control CADmatic 4 system, ensuring precise and efficient operation. The saw blade projection is 95 mm, and it operates with a main saw motor of 18.0 kW. For more information about this panel saw, please reach out to us. Additional equipment • Air cushion table with roller element 2160 x 650 mm: 4 pieces • Central blower: 1 piece Machine Benefits Qualitative Machine Benefits Djdpsyaiiyofx Al Asck • Ce-certified, gs-certified, fph wood dust certified • Division: 75/275/475/1050/1850/2650/3450 mm measured from the angle rule to the center of the clamping collet • 2 additional two-fingered clamping collets possible • 4 manual trimming rakes at clamping collets • 1 additional one-fingered clamping collet possible • Jet spacing of air cushion tables: 70 x 70 mm Technical Machine Benefits • Pre-cut saw motor: 2. 2 kw • Operating voltage: 400 v / 50 hz • Electrical connection value at hs motor: 18. 0 kw = 24 kw, 21. 0 kw = 27 kw • Positioning accuracy: +/- 0. 1 mm/m • Surface-friendly material transport, lifetime positioning accuracy, no lubrication required, high program slider speed, maintenance-free, full stability of the steel table maintained, easy, cost-effective replacement of phenolic resin plates, minimal wear of the cylinders, uniform pressure application, minimal cutting = scratch cut, significant cycle time savings, top cutting quality, minimal setup times, reduction of cycle time, pressure strength electrically adjustable • Cutting length: 4300 mm • Cutting width (program slider travel): 4250 mm • Roller track (element 10-track): 1 piece • Roller track (element 2-track): 5 pieces • Clamping collets: 7 pieces (first 3 pieces two-fingered, all others one-fingered) Extra Information Machine still under power

Condition: excellent (used), Briquetting machine POR Oscar 9kW Dcedpoxdahyjfx Al Ask Average briquette output: 130-180 kg Briquette diameter: 70 mm Motor power: 9 kW Feeding hopper diameter: 1170 mm Technical documentation CE mark Machine weight approx. 800 kg

Condition: used, machine/vehicle number: 005108, Position 1: Front-Loading Panel Saws HOLZMA-HPP 380/43/43 + TLF Dcodpfswuck Ijx Al Ask Position 2: Horizontal Storage Systems HOLZMA-HPP 380/43/43 + TLF

Condition: excellent (used), functionality: fully functional, POINT TO POINT BORING machine with CN model MASTERWOOD SPEEDY 207 Dcsdpfx Aewd Irvol Ask second hand machine for custom furniture manufacturing, kitchen furniture, bathroom furniture, and various processes Boring head with 5 independent vertical chucks and 1 double horizontal chuck Saw for longitudinal cuts Machine table with 1390 x 750 mm boring capacity and two side jump up stops handled by the control unit to execute with only one program and one intermediate hold panels up to 2800 x 750 mm size Possibility of boring 2800 mm panels Pneumatic tool displacement mm 60 Max panel thickness mm 50 Spindles rotation rpm 4500 Saw rotation rpm 6000 Vacuum pump motor Hp 1,5 Vacuum cup diameter mm 80 Front stop complete with 4 locking cylinders for drilling narrow workpieces and strips Multitasking control complete with interactive graphic programming, 9" video, boring programs, optimizing working cycle, graphic, parametric, diagnostic modes Overall dimensions - Machine : mm 2500 x 1800 x 1800 h - Weight kg 850 Overall dimensions - Electric board : mm 800 x 520 x 1200 - Weight Kg 120

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Equipment and technical data: Edge feed for rolls and strips Joining milling unit with 2 milling heads Dodpfjvymdqsx Al Asck Adhesive application system cartridge 3-roll printing unit Cross-cut saw unit Radius milling unit Radius scraper unit Corner copying unit Surface scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Edging height max.: 55 mm Edging length strip min.: 350 mm Edging projection per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Feed speed: 12.5 m/min. Machine dimensions L x W x H 6480 x 1250 x 1690 mm Availability: short term Storage location: Flörsheim

Condition: excellent (used), Year of construction: 2021, Used HOMAG Drillteq V-200 - Year of manufacture: 2021 - Immediately available Dcedpfxjzdvuvo Al Aek - Excellent condition - Tools can be included for an additional charge. Please feel free to contact us if you have any questions.