Used Paul Kme 2 for sale (44)

Condition: used, Year of construction: 1972, machine/vehicle number: 1171, Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton Nwsdpfx Aeuqdwxja Djb Standard configuration Machine included: - Fence HS decoiler M 15 / 500 - built in 2009Material width 15 - 500 mmCoil weight 1,5 tCoil exterior diameter 1400 mmCoil interior diameter  380 - 530 mm HS straightener RME 40 - 9 - built in 2009 Material thickness 0,4 - 2 mmNumber of feeding rolls 2 piecesNumber of straightener rolls 9 piecesDiameter of straightener rolls 61,9 mmDiameter of feeding rolls 61,9 mmFeeding speed 40 m / minFeeding length  0 - 9999,99 mm Extended machine accessories The machine was converted to SIEMENS S7 in 2009.

Condition: used, tank capacity: 1,969 l, GENERAL Design: suspended Remarks: 2 support brackets made of V2A (support surface reversed; see photos) Rotational speed: 571 rpm Inner diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be checked) Overall height: 3,800 mm Heating/Cooling: available Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top head: bolted lid Shaft sealing: mechanical seal without thermosiphon vessel Agitator: propeller Pedestal type: bracket Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Njdpfoxqa Slsx Aa Dswb Volume: 1,969 liters Double jacket volume: 70.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 2,110 mm Previous use: Pharmaceutical chemistry VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Outlet: DN80 flange Note: slight residues MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 220/380 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.7 mm Agitator arrangement: eccentric in the top head Agitator equipment: technical documentation for agitator available

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, 1 overhauled splinter separator Paul, 2-lamella, fixed lamella on the right, movable lamella on the left (for left-hand machine) Total length: 5.50 m Total width: 850 mm Roller spacing: 500 mm Njdpjtx A Sxofx Aa Dowb Roller width: 790 mm for max. timber length: 5.00 m 8 driven spiral rollers and 3 driven smooth rollers. 11 rollers removed and fitted with new ball bearings Movable slat mounted on 4 ball-bearing supports for easy movement with new roller chain and 11 new idler wheels. Sturdy sheet metal lining between all rollers as good as new condition

Condition: used, - Suitable for boards from 2,500 mm to 6,500 mm in length - 6-strand roof chain conveyor - Powered discharge arms - Approx. 6,000 mm long Nwodsx E Sqxopfx Aa Deb - Approx. 750 mm wide - 3-strand powered sorting conveyor approx. 10,000 mm long - Integrated powered alignment roller conveyor - 6 individually mechanically adjustable discharge positions - Step-by-step feed

Condition: like new (used), Fully mechanized line for splitting and cutting (Masterflex+Paul) consisting in: Nwsdekt I Uyspfx Aa Deb - transverse conveyor for 2 packages - automatic destacking and singularization installation with slat recovery with conveyor included - transverse conveyor for circular feed piece by piece - trolleys on the rail for circular feeding - circular Masterflex provided with 4 movable blades, axis to axis, free passage width of 1,000 mm, cutting height 100 mm - 2 motors of 50 KW, 4 releases electrically controlled by joystick, provided with a control panel - timber evacuation conveyor provided with a waste separator (edges and hems) - waste conveyor + automatic waste cutting pendulum - parts recovery conveyor with return to the operator for repair - transversal conveyor with singularization for feeding optimizer Paul - optimizer Paul model, passage width of 1,000 mm, cutting height of 100 mm, equipped with marking station for defects, with laser (without chalk) - sorting line by optimizer with 20 ejectors. Installation is in a very good working condition.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 99.128351, DOUBLE MULTI RIP SAW 1400 MM. TOP+BOTTOM SHAFTS. MOTOR KW 55 / A 102 MACHINE OFF / DIRECT OUT OF RUNNING PRODUCTION 6-7 YEARS AGO. CONDITION IS GOOD. Nwjdsx Dth Tjpfx Aa Deb require brochure /leflet

Condition: like new (used), functionality: fully functional, Tool shaft for multi-saw PAUL K34G total length 850mm diameter 100mm Nwsdpfxsqwg Swj Aa Dsb

Year of construction: 1991, condition: used, Volume: 15 hl Nsdow Tml Eepfx Aa Dswb Periphery: Pump

Condition: refurbished (used), Model 11 completely overhauled Description: CNC cross-cut system Paul MKL or K or KE as desired Manufacturer: Paul Year of manufacture: General overhauled with newest technology Condition: As good as new Technical data: Cutting width 150 mm Cutting height 85 mm Saw blade diameter:450 mm Saw motor 5,5KW Nedpfjb Rl I Hjx Aa Djwb Input length as required CNC Maxi 5 control with optimization Sorting belt as desired Machine would be completely overhauled, all bearings new motors new with latest eff Class, new control, new swingarm.

Condition: like new (used), Min. input length: 500 mm, max. 6 m. Cross section: max. 140 X 250 Motor: 5.5 kW Sawing stroke servo swing arm Feed by means of rollers, 6 pieces top, 6 pieces bottom Nwjdper A Et Tsfx Aa Dsb CNC control Maxi 8.0 1 X sorting unit per 11.5 m Machine is set up according to your wishes

Year of construction: 2002, condition: good (used), Min. inlet length: 500 mm, max. 5.5 m. Cross section: max. 85 X 150 Motor: 5,5 kW Njdpfx Aobg Svhoa Dewb Sawing stroke servo rocker Feed by rollers, 5 pieces on top, 5 pieces on bottom CNC control Maxi 4.0 1 X sorting each 11,5 m year of manufacture 2002

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 700 mm, saw drive: 31,000 W, total length: 17,000 mm, total height: 1,000 mm, height adjustment type: mechanical, total width: 2,500 mm, Double-edge circular saw with conveyor rollers from Paul Type: PKAH Year of manufacture: 1989 5-meter driven conveyor rollers 2 x 5-meter non-driven conveyor rollers With side-mounted board removal belt Total L x W x H: 17 x 2.5 x 1 meter Boards up to 70 cm wide and 16 cm thick can be edged. Width electrically adjustable. Height mechanically adjustable. Nedpfxswa T Dcj Aa Dowb 400 V Max. 63 A 31 kW Please contact us if you are interested or have any questions.

Condition: used, Complete sawmill, for now only for sale as a whole. Reservation for individual purchase possible at any time. Sawmill consisting of: 01. Log infeed 3-strand Mayrhofer with separator Nwsdowptuyspfx Aa Deb with inserter Total length: 8 meters Width: 3.5 meters 02. Fully hydraulic carriage Mayrhofer with auxiliary carriage with rails Track gauge: 90 cm 03. Pini & Kay FN65 HH frame saw Passage width: 650 mm Drive motor: 33 kW With saw blades With suspension With intermediate gear With splitting wedge With scraper conveyor for sawdust 04. Frame roller table with 3 extractors and steep conveyor Length: 8.5 meters Width: 1.8 meters Roller width: 1.6 meters 05. Extraction table 4-strand Length: 4.5 meters Width: 2 meters 06. Steep conveyor 4-strand Conveyor length: 3.6 meters Width: 3.8 meters 07. Double edger Paul KME 2 0-line left Right-hand machine Drive motor: 22 kW With 2 under-table crosscut saws With hydraulic roller lifting With hydraulic width adjustment With sliver separator With extraction table/cross conveyor for slivers With elevator for main material With conveyor belt With spiral roller conveyor With manual box sorting (10 boxes/carts) 08. Sharpening room consisting of: Frame saw sharpener Vollmer CNHV 1978 Set device Loroch SGB 6 1983 09. Drying chamber Vanicek Internal dimensions: Length: 4.53 m Width: 9.16 m Height: 4.4 m External dimensions: Length: 4.6 m Width: 9.3 m Height: 4.62 m Location: Austria, near Vienna

Condition: excellent (used), Drilling depth 9 cm Pneumatic press Pneumatic feed Njdpfewndwpex Aa Dowb Motor 1.7/2.3 kW Height adjustment 14 cm 45-degree angle Table length 60 cm Width 72 cm Reach 60 cm (right-left) Front-back 20 cm

Condition: reconditioned (used), - Paul cross-cut saw 17 AP - pneumatic saw stroke - 150 mm cutting height - 400 mm max. cutting width - 2 non-driven roller tables, each 2,000 mm long Njdpfx Aevkfuisa Dewb

Condition: used, functionality: fully functional, machine/vehicle number: 97-006000S, Year of construction: 2020, Offered for sale is an inkjet printer from the Jet3 series by Paul Leibinger GmbH & Co. KG, manufactured in 2020. The machine is in used condition and is currently not in operation. From a safety perspective, the machine complies with the latest standards. The machine is fully operational. HOUSING - Made of stainless steel - Width: 486 mm, Depth: 286 mm, Height: 446 mm - Weight: 20.5 kg PRINTHEAD - Stainless steel housing - Total length: 265 mm, diameter: 43 mm - Weight: 1.5 kg Nwsdpfexb Uqdex Aa Djb An inspection of the machine is possible upon request and by appointment. If you have any further questions, please do not hesitate to contact us. (Images to follow)

Condition: reconditioned (used), - Paul crosscut saw 15 AO - hydraulic saw stroke - 150 mm cutting height - 500 mm max. cutting width Njdpow Slgfefx Aa Dowb - 1 non-driven roller conveyor approx. 1,600 mm long

Condition: refurbished (used), Year of construction: 1972, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 6619, Classic heavy-duty through-feed press featuring modern control technology with a uniquely large press bed Nwjdpfxoxgfgaj Aa Djb Specifications • Brand: Paul Ott • Type: Through-feed press • Year of manufacture: 1972 • Press bed dimensions: 2300 mm x 3600 mm • Infeed and outfeed table dimensions: 3900x2560 mm • Maximum stroke: 140 mm • Number of cylinders: 8 • Pressing force: > 100 bar • Connected load: 380V • Control system: Siemens PLC • Heating: Top and bottom plates hydraulically heated • Infeed and outfeed: Fully automated or manual • Condition: Completely overhauled in 2020 and ready for operation This robust through-feed press has been thoroughly overhauled, both hydraulically and mechanically, and is equipped with a modern Siemens control system. It combines classic durability with contemporary automation technology, making it ideal for industrial applications requiring reliability and flexibility. Further information: • The machine can be viewed in operation at our site in Tilburg • Overhaul and maintenance reports available for inspection • Transport and installation can be arranged by agreement

Condition: not inspected (used), functionality: unexamined, MULTIPLE CIRCULAR SAW PAUL K 34G/1500 OCCASION Nwjdjuryrnspfx Aa Djb TECHNICAL FEATURES: - DRAGGING SYSTEM RUBBERIZED ROLLERS. - USEFUL DRAG WIDTH OF 1.500 MM. - MAIN ENGINE POWER 37 KW (50 Cv) - ELECTRONIC VARIATOR REDUCER MOTOR OF DRAGGING 3 HP AND 2-48 M/MIN - MAXIMUM SAW DIAMETER 300 MM - CUTTING HEIGHT MAX 100 MM

Condition: refurbished (used), hydraulic feed drive unit, fully reconditioned, stepless variable; 1 unit for KME 2 or BM - right execution - without additional pump - type 56-009 Nsdpfjirmulsx Aa Djwb

Condition: new, new spacer rings of different thickness for PAUL KME 2 and BM, with bore 75 mm, new carbide tipped saw blades 300 Ø and 380 Ø x 75 Ø, new CV saw blades hard-chrome plated different Ø Nsdpfxeh Anyfo Aa Dowb

Condition: good (used), Original spacer rings PAUL in various widths for edging saw KME 2 or BM, outside-Ø 120 mm, bore-Ø 75 mm, with 2 keyways Nwsdpfx Aaeiimz Aj Dsb

Condition: good (used), Year of construction: 1987, functionality: fully functional, Besaumer Paul Kme 2/750 Left, fully hydraulic, 22 kW, with electrical system Nwedpfx Ajxq Hlroa Deb

Condition: reconditioned (used), functionality: fully functional, cutting height (max.): 125 mm, • 125 mm cutting height • 750 mm passage width • Saw shaft newly fitted with bearings • 18.5 kW drive motor • 1 fixed bushing • 1 slatted bushing, approx. 300 mm usable clamping length • 1 adjustable bushing • 50 mm saw shaft diameter • Mechanical height adjustment of upper rollers • Vibratory chute in the machine • 10 curved saw blades • 0 – 50 m/min stepless feed speed • Machine workshop inspected Nwjdpfx Asw Slwkja Dob • Machine newly painted • Approx. 5 m long roller table in front of the saw • Approx. 4 m long roller table after the saw

Condition: reconditioned (used), functionality: fully functional, cutting height (max.): 125 mm, • 750 mm passage width • 125 mm cutting height • 18.5 kW saw motor • Mechanical quick width adjustment • Saw shaft newly mounted • 1 fixed bushing • 1 adjustable bushing Nsdpfx Aewt N N Uja Dowb • 50 mm saw shaft • Manual upper roller height adjustment • 2 used saw blades • Stepless feed speed 0–50 m/min • Machine workshop inspected