Used Pharmaceutical for sale (1,748)

Condition: used, Used Winkworth model PV63-25 approximately 63 litre stainless steel process vessel. Unit has a flat top with half hinged lid and welded dished bottom head and includes pneumatically operated raise and lower mechanism. Unit measures approximately 600mm diameter x 450mm straight side. External stainless steel jacket rated 3.5 bar design pressure at 200 deg.c. Unit has a top entry stainless steel contra rotating gate type paddle agitator driven by 1.1kW geared-motor producing 33.6rpm and a 0.75kW geared-motor producing 76.4rpm . Unit has a bottom entry offset Silverson BE275 homogeniser with a square hole disintegrating head driven by a 0.75kW motor. Unit has a local control panel and is mounted on a stand with (4) legs. Hjdpfjymayvex Agwofd

Condition: used, Comprehensively tested and refurbished, used Winkworth model model RT400 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2016 Capacity: 400 litre (product dependent) Mixing trough: 1,300mm long x 800mm diameter. Type Of Blades: T-Arm ploughshare blades with drive/gearbox. Hsdpfx Agjymayijwofd A video of this mixer is available below. Specifications: Bowl Volume: 105.7 gal Material Of Construction: Stainless steel Dimensions: 1300mm long x 800mm diameter

Condition: used, Comprehensively tested, used Winkworth reportedly model GU660 stainless steel ribbon blender. Manufacturer: Winkworth Material: Stainless steel Capacity: 660 litre (product dependent) Mixing trough: 1,750mm long x 700mm wide x 790mm deep Discharge Type: air operated discharge value Type Of Blades: single interupted ribbon Motor: 7.5kw, 1450rpm, 415volt, 3/50 motor through Opperman type HTM7 gearbox rated 38.2/1 reduction rated, 37rpm output. Also includes: Hinged lid with clamps. Hjdpeymax Ssfx Agwefd -Control panel with castell key interlock. -Mild steel mobile base. A video of this mixer is available below. Specifications: Capacity: 23.3 ft³ Material of construction: Stainless steel Width: 27.56" Horsepower: 10 hp Length: 68.9" Dimensions: 68.90in x 27.56in x 31.10in

Condition: used, Used Molteni model MPME700SV-TDS stainless steel triple action vacuum mixer. Manufacturer: Molteni. Material: Stainless steel. Capacity: Mixing pan approximately 700 litres. Hfsdpeymaxrjfx Agwod Type of blades: (1) high speed disperser driven by a 48kw motor, (1) high speed disperser driven by a 36.5kw motor and (1) anchor type agitator driven by a 18.5kW Exd rated motor. Also includes: Hydraulically operated raise and lower. For details about the refurbishment work, contact a member of our sales team. Equipped With: Per RD 28/08/25 on hold for potential inspection 24/09/25, 25/09/25 or 26/09/25.

Condition: used, Comprehensively tested, used stainless steel Aeromatic Fielder model GP1 VP mixer / granulator. Manufacturer: Aeromatic Material: Stainless Steel Capacity: 10 litres Type of Blades: Bottom entry 3-blade mixer with drive, and a side entry chopper. Hfjdpfx Asymaxlsgwod Also includes: Jacketed removeable bowl and local controls. Various inserts to reduce bowl capacity. Unit is mounted on mobile base.

Condition: used, Used Enrico Molteni model ED30 stainless steel disperser. Unit is driven by 22kw motor. Has stainless steel mixing pot with clamping section. Includes hydraulic powerpack for raise & lower. Hodoymaxfopfx Agwsfd

Condition: used, Comprehensively tested and refurbished, used Greaves Model SH 15 stainless steel high shear mixer. Shaft approximately 1750mm long x 150mm diameter general purpose disintegrating head. Unit is direct driven by 11kw 415volt 3/50 motor. Reportedly suitable for 500-2000 litre batches. Click on the link below to see a video of the machine running. Hodpsymawhsfx Agwofd

Condition: used, Chemical Mixer, Stainless Steel Mixer, Chemical Mixer 2000 L, Used Machine Manufacturer: Chemplex Type: T240 Electrical power: Heating: 20 kW Mixer motor: 3 kW Hfodpfsyc Sfvox Agwod Weighing system: MS-h10/kn, MS-CT-SQB – maximum weighing capacity 3,500 kg Maximum heating temperature: 90 °C Capacity: 2,000 L Description: General-purpose chemical mixer manufactured by Chemplex with a 2,000-liter capacity, designed with an integrated tank weighing system (3 load cells with indicator). The vessel is an atmospheric tank with a DN100 bottom outlet. Heating is provided by a 20 kW electric bottom heater. The mixer is equipped with a propeller-type agitator. It features a flat lid, which is openable and fitted with a safety grid. The lid includes 4 dosing/inlet nozzles. Recommended operating temperature: 20–60 °C. The bottom discharge nozzle is fitted with a stainless steel ball valve, equipped with a pneumatic actuator and bubble position indicator. The actuator is spring-loaded, providing a fail-safe (safety closed) function.

Condition: ready for operation (used), Chemical mixer, stainless steel mixer, chemical mixer 3000 L, used machine Manufacturer: Chemplex Type: T420 Electrical power: Heating: 30 kW Mixer: 3 kW Weighing system controller: MS-h10/kn, MS-CT-SQB – Maximum weighing capacity: 3500 kg Maximum heating temperature: 80 °C Capacity: 3000 L Description: General-purpose chemical mixer manufactured by Chemplex with a 3-ton capacity, designed with an integrated tank weighing system (3 load cells with indicator). The tank is an atmospheric vessel with a DN100 bottom outlet. Hfedpfx Ajyc Nq Asgwsd Heating is provided by 30 kW electric bottom heating and jacket heating. The mixer is equipped with a propeller-type agitator. It has a flat lid that can be opened and is fitted with a safety grid. The lid contains 4 dosing/inlet nozzles. Recommended operating temperature: 20–60 °C. The bottom discharge outlet is fitted with a stainless steel ball valve equipped with a pneumatic actuator and bubble (position) feedback. The actuator is spring-loaded, therefore the ball valve has a safety-closed function.

Condition: used, Chemical mixer, stainless steel, chemical mixer 2000 L, used machine Manufacturer: Chemplex Type: T250 Electrical power: 20 kW heating Weighing system: MS-h10/kn, MS-CT-SQB – maximum weighing capacity 3,500 kg Maximum heating temperature: 90 °C Description: Chemplex-manufactured general-purpose chemical mixer with a 2,000-liter capacity, designed with an integrated tank weighing system (3 load cells with indicator). The vessel is an atmospheric tank with a DN100 bottom outlet, suitable for high-viscosity and slurry materials as well. Heating is provided by a 20 kW electric bottom heater. Hfodsyc Np Eepfx Agwod The mixer is equipped with: Spiral ribbon anchor(Anker) mixer Propeller mixer It has a flat lid, which is openable and fitted with a safety grid. The lid contains 5 dosing/inlet nozzles. Recommended operating temperature: 20–60 °C. The bottom discharge nozzle is fitted with a stainless steel ball valve, equipped with a pneumatic actuator and bubble position indicator. The actuator is spring-loaded, providing a safety-closed (fail-safe closed) function.

Condition: used, Year of construction: 2022, Year: 2022 Condition: good Automatic jogger BSB L professional BSB 3 L professional is able to jog even “difficult” materials, such as metallic paper, pharmaceutical package inserts or labels, much easier and thus quicker than conventional joggers. Technical specification: Hedox E Rxzopfx Agwsfd - jogger with pressing - Max. size: 800 x 1140 mm - Max. pile hight: 160 mm Configuration: - Perforated air table - Left + Right folding flap - Side flaps perforated with air cushion - Stack lifting bar for better stacking - Air ejection by pneumatic cylinder

Condition: used, Year of construction: 2002, Manufacturer : Transvis Hsdpfoylc Sfox Agwjfd Type: Double pressurised melting tank Year : 2002 Material : 316L stainless steel Total volume : 40L (2 x 20L) Useful volume : 30 L (2 x 15L) Maximum operating pressure: 2 bar Test pressure: 4.2 bar Heating: silicone piece on shell Thermoregulators: 2 units (individual heating) Mobile unit on wheels Supplied with safety valves

Condition: good (used), 3 X 25,000 Litre Stainless Steel Tanks Hfsdpfeytc Ntex Agwsd

Condition: used, Year of construction: 2010, machine/vehicle number: CA38, Technical Specifications & Performance Data The Used Capsuling Machine Robino & Galandrino MONOSTADIO FT6 is a high-precision rotary capsuler designed for PVC capsule application on sparkling wine formats. Engineered for reliable operation in demanding beverage production environments, this second hand unit combines throughput with precise capsule placement for professional finishes on glass bottles. Manufacturer / Model: Robino & Galandrino MONOSTADIO FT6 Year of manufacture: 2010 Machine category: Capsuling machine (PVC capsules) Production speed: up to 7,000 bottles/hour (format-dependent) No. of heads: 6-head rotary carousel for continuous operation Container type: Glass bottles Bottle format: 0.75 L (typical sparkling wine “Spumante” format) Product type focus: Spumante and sparkling-style wine applications Safety: Safety features included (guarding and interlocked access) Condition: In storage, second hand Advanced Automation & Control Systems Designed for dependable industrial packaging, the MONOSTADIO FT6 features automated operations to stabilize high-speed cycles and ensure capsule placement quality. The control system supports precise synchronization with upstream and downstream modules on a used bottling line. Operator control panel for speed setting, fault diagnostics, and production counters Bottle presence and spacing sensors to prevent misfeeds and reduce stoppages Automatic cycle controls for consistent capsule distribution and finishing Interlocked guards with emergency stop circuits for safe intervention Electrical design suited to modern beverage production environments (details available on request) Production Line Integration Capabilities This capsuling machine integrates seamlessly into complete wine lines, positioned after corking and wire-hooding and before labeling. Mechanical and electrical interfaces allow smooth communication with typical line components such as rinsing, filling, capping/corking, wire-hooding, labeling, and packing equipment. Compatible with upstream rinsing and filling, and downstream labeling and case packing Synchronizable with conveyor drives and starwheels for stable bottle handling Configured for 0.75 L glass; additional format parts may extend flexibility depending on availability Can be part of mixed-material plants where other stations handle PET or aluminum containers Machine Condition & Maintenance History The unit is currently in storage with safety features included. As a second hand equipment asset from a professional wine packaging environment, it presents a solid base for reliable service within a used bottling line. Visual inspection, documentation, and available change parts can be discussed to align with specific project requirements. Operational Performance & Versatility Hjdpfxeyhbzqj Agwofd Optimized for Spumante and premium wine presentations, the MONOSTADIO FT6 delivers uniform capsule application at high speed, preserving label panels and ensuring an even, aesthetically pleasing finish. Six sync...

Condition: used, Year of construction: 2006, machine/vehicle number: TP106, Used Capping Machine AROL T stopper year 2006 Machine Description of the Capper AROL KAMMA PKV The machine is specifically designed for efficient and reliable bottling with T-stoppers in industrial settings. With its five heads, the machine precisely manages each step of the process. Consequently, it maintains closure quality consistently while operating at high production speeds. Cap Gripping System Hedpjyhbymsfx Agwefd To ensure effective stability during cap positioning, the machine’s vacuum-based gripping system secures each cap, which significantly reduces the risk of errors or misalignment. Moreover, an integrated vacuum pump powers this mechanism, ensuring a firm and consistent grip on each cap throughout the process. Adjustable Capping Head One key advantage of the AROL capping machine is its adjustable-height capping head, which easily adapts to various bottle sizes. As a result, this versatility makes the machine suitable for different production formats. Therefore, it increases both efficiency and operational flexibility. Cap Distribution System An alveolar centrifugal distributor manages cap distribution, ensuring uniform and consistent delivery. Furthermore, this component minimizes the risk of jamming. Thus, it keeps the workflow continuous, which is essential for maintaining high and uninterrupted production. Safety and Materials The Used Capping Machine AROL T stopper year 2006 includes safety guards, which effectively protect operators throughout operation. Additionally, the machine’s stainless steel exterior provides strength and corrosion resistance, which are both critical for use in the food and beverage industries. Production Speed and Inverter Control Thanks to its inverter control, operators can easily adjust the machine’s speed, allowing it to meet specific production demands. Consequently, the AROL capping machine can reach a production capacity of approximately 7,000 bottles per hour. Thus, it offers an ideal combination of efficiency and flexibility to satisfy market needs. Bottle Flow Configuration With its left-to-right bottle feed (clockwise flow), the machine optimizes the production line layout. This setup, therefore, integrates smoothly into existing systems, reducing installation time. In turn, it supports continuous production and maximizes operational efficiency. Production Year of the Capper AROL KAMMA PKV Manufactured in 2006, the Used Capping Machine AROL T stopper combines reliability with proven technology. Even though it was produced years ago, the machine still upholds high-quality standards. Hence, it offers companies a reliable and versatile capping solution.

Condition: used, Year of construction: 2007, machine/vehicle number: TP111, Used Capping Machine Tetra Pak Helicap 23 6000 bph The used capping machine Tetra Pak Helicap 23 6000 bph applies plastic screw caps to carton packages. Specifically, Tetra Pak manufactured this model in 2007 and configured it for the 1000 Slim format. The Slim format, which is widely used, has a rectangular profile and a reduced cross-section. As a result, it optimizes liquid packaging by improving shelf stability and reducing material consumption. Technical Specifications of the Used Capping Machine Tetra Pak The Helicap 23 model applies the CAP 47 screw cap, which ensures a hermetic seal and allows easy opening for the consumer. Moreover, the screwing system maintains a consistent torque so that leaks or packaging defects do not occur. The Used Capping Machine Tetra Pak Helicap 23 6000 bph operates with a 400/230 VAC power supply, meaning that it supports both industrial three-phase networks and configurations with neutral and ground. Additionally, its electrical system works with 50/60 Hz frequencies, thus adapting to different power standards. The 20A (adjustable) main fuse regulates maximum absorption, while the control circuits function at 24V DC, ensuring a safe voltage for machine operation. In terms of pneumatics, the system requires compressed air at a pressure between 6 and 7 bar. Consequently, this pressure allows the capping and cap-handling mechanisms to function correctly. Safety and Storage Conditions The Used Capping Machine Tetra Pak Helicap 23 6000 bph includes integrated safety devices so that it meets industrial regulations. Because of these features, the system prevents accidents during maintenance and production operations, thereby reducing the risk of malfunctions. Currently, the machine remains in storage in good condition. For this reason, it is ready for reinstallation in a bottling line. Furthermore, its configuration allows seamless integration with other Tetra Pak equipment, ensuring that production efficiency remains high without requiring structural modifications. Hodpfx Aoyhbygsgwjfd Applications and Operational Advantages of the Used Capping Machine Tetra Pak This Used Capping Machine Tetra Pak processes up to 6000 bottles per hour (bph). Due to its compatibility with the 1000 Slim format, it works particularly well for packaging beverages in Tetra Pak containers designed for large-scale distribution. This capping machine offers several advantages: It applies the CAP 47 screw cap with high precision. It controls torque application so that waste is minimized. It integrates efficiently with existing filling lines, which helps maintain productivity. It meets industrial safety standards, ensuring compliance with regulations. Moreover, operators can easily incorporate this mach...

Condition: used, Year of construction: 2004, operating hours: 28,000 h, machine/vehicle number: TP117, Technical Specifications & Performance Data The Used Tetra Cap Applicator TCA45 is a robust, single-head cap application unit from Tetra Pak®, engineered for reliable operation in beverage production environments and seamless integration within a used bottling line. Purpose-built for continuous industrial packaging, it offers steady output with precise cap application after filling and before packing. Manufacturer: Tetra Pak® Model: TCA 45 TETRA PACK Year of manufacture: 2004 Nominal speed: up to 7,500 bricks/hour No. of heads: 1 Cap type: OEM code 4 (per manufacturer specification) Rotation direction: OEM code 0 (per manufacturer specification) Category: Capping Machine / Cap Applicator Placement: downstream Tetra Pak filling, upstream final packaging Container compatibility: Tetra Pack bricks with appropriate change parts Typical products: water, juice, beer, wine, and other still beverages Documentation: manuals available Safety: integrated safety features included Advanced Automation & Control Systems Designed around an industrial PLC with a user-friendly HMI, the TCA45 facilitates stable, repeatable cap application. Recipe-based settings support format recall, and process alarms help operators maintain consistent performance. Torque control, cap presence verification, and fault diagnostics contribute to cap quality and minimize rework in high-speed beverage production. PLC/HMI control for straightforward operation and monitoring Hfedpfx Aoyhblvegwsd Automatic fault detection with guided troubleshooting Integration-ready I/O for upstream filling and downstream packing synchronization Electrical: built for standard industrial power supplies (details per manual) Machine guarding with interlocked access doors and emergency stop circuits Production Line Integration Capabilities This cap applicator is well-suited to second hand or newly engineered used bottling line projects. It interfaces efficiently with infeed/outfeed conveyors, bottle orienters, fillers, and labelers, ensuring balanced line flow and minimal downtime. Compatible with Tetra pak fillers. Communication-ready for line control and buffer management Machine Condition & Maintenance History The unit is currently under maintenance, undergoing inspection and service to verify core functions and safety systems. Wear components are being checked and adjusted as needed to align with expected performance at up to 7,500 bricks/hour. OEM manuals are available to support commissioning, operation, and preventive maintenance schedules. Operational Performance & Versatility Optimized for consistent, high-quality capping, the TCA45 supports a broad mix of beverage formats common in industrial packaging. With suitable change parts, it can handle PET and glass bottles as well as aluminum containers, making it versatile for diversified production runs. Suitable applications: water, juice, beer, wine, functional drinks, and similar beverages Stable cap application to support product integrity and shelf-life Gentle handling...

Condition: used, Year of construction: 2014, machine/vehicle number: CA76, Technical Specifications & Performance Data The Robino & Galandrino Fenix 2 is a dedicated capsuling machine engineered for precise capsule application on bottles within a used bottling line context. Built with industrial packaging reliability in mind, this unit integrates smoothly into beverage production environments and second hand bottling equipment upgrades. Manufactured by Robino & Galandrino, it leverages the brand’s engineering for consistent, repeatable results in capsule application. Manufacturer: Robino & Galandrino Model: Fenix 2 Year: 2014 Machine category: Capsuling machine Hsdpfx Ageyhbi Ijwjfd Schema/code: FEX750 Electrical supply: 400 V, 3-phase Frequency: 50 Hz Nominal current: 6.5 A Typical application: Capsule application on bottles in beverage production lines Advanced Automation & Control Systems The Fenix 2 supports straightforward integration with modern line controls. Its 400 V 3-phase, 50 Hz electrical configuration is standard across European bottling equipment, simplifying installation alongside PLC/HMI-managed production lines. Designed for repeatability and operator efficiency, the machine supports clear operational states, standard interlocks, and controlled application parameters that help maintain consistent capsule quality. Production Line Integration Capabilities This capsuling machine is intended for inline operation as part of an industrial packaging system. It interfaces effectively with upstream and downstream modules such as corking/capping stations, labeling machines, and conveyors. The machine’s robust frame and standardized electrical architecture allow integration into a used bottling line or a mixed-manufacturer production line for beverages. It is suitable for configurations handling glass bottles commonly found in wine and premium beverage packaging. Machine Condition & Maintenance History As a second hand, 2014-manufactured unit, the Fenix 2 offers a solid balance between modern engineering and proven field reliability. It suits facilities seeking dependable capsuling performance within an established beverage production process or upgrading an existing used bottling line. Maintenance routines typically include capsule feed verification, head alignment checks, and inspection of wear parts to preserve application accuracy and throughput. Operational Performance & Versatility The Fenix series is recognized for stability in capsule application on bottles used in wine and premium beverage packaging. It is designed for precise placement and consistent shrink/application characteristics, supporting high-quality presentation standards demanded by beverage production. The machine is compatible with standard conveyor handling solutions for glass containers and is adaptable to different line layouts and speeds determined by upstream/downstream equipment. Installation Requirements & Site Preparation Installation requires a stable production floor, 400 V 3-phase 50 Hz electrical service, and alignment with existing conveyor and line control systems. The machine should be positioned to allow safe operator access for loading capsules, adjustments, and routine ...

Condition: used, Year of construction: 2014, functionality: fully functional, total length: 1,300 mm, total width: 1,200 mm, Equipment: type plate available, Pallet Lift Table / Pallet Transfer Unit Manufacturer: Overbeck Year of manufacture: 2014 Condition: Good (Used) Drive type: Chain drive Total length: approx. 1300 mm Total width incl. motor: approx. 1200 mm Total width without motor: approx. 970 mm Roller width: approx. 945 mm / Usable width: approx. 880 mm Roller diameter: approx. 80 mm Number of rollers: 7 Roller pitch: approx. 200 mm Stock: 2 units Hfodpfoypi Ubox Agwjd Price per unit Internal item number: 2026030301 The conveyor system was in operation until disassembly. Condition: Fully functional, with signs of wear Ideal for fast material handling Professionally dismantled and packaged Thanks to the excellent workmanship, your materials glide smoothly to their destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for inbound and outbound goods. We are happy to provide you with a customized offer or advise you on project planning or assembly questions. Simply let us know your requirements and local conditions. Take advantage of our many years of experience and our excellent network of industry specialists. We have successfully completed projects for companies in sectors such as logistics, pharmaceuticals, skilled trades, and the electronics industry. Together, we will develop strategies to optimize your workflow and material flow cost-effectively and sustainably. We can also offer fully automated sorting solutions or additional components such as picking shelves or containers.

Year of construction: 2009, condition: good (used), BINDER KB 720 Refrigerated Incubator This high-performance refrigerated incubator for controlled temperature management of microorganisms features a chamber size of 100 x 115 x 60 cm, providing a total usable volume of approximately 720 liters. Temperature range: 0° C - 100° C Hjdpfx Ajypamuegwjfd Manufacturer: Binder Year of manufacture: 2009 Space requirement: 125 x 100 x 200 cm

Condition: like new (used), Year of construction: 2025, Binder KBWF 720 Growth Chamber, ex-demo from 2025, like new. Temperature range: 0°C to 70°C Temperature range with lighting: 10°C to 60°C Humidity range from 10 to 80% relative humidity Adjustable lighting cassettes The KBWF series fitotron chambers utilize natural lighting to provide uniform and consistent conditions for illumination, humidity, and temperature. These chambers are ideal for plant and other organism cultivation, as the homogeneous light distribution and humidity regulation stimulate growth, similar to the constant temperature maintained in climate chambers. Temperature can be displayed in the range of 0°C to 70°C with an accuracy of one tenth of a degree, and humidity with an accuracy of one tenth of a percent. Hfedpfx Ageyahm Rswjd The device is equipped with a microprocessor that effectively controls the humidification and dehumidification system. Humidity regulation is carried out using a capacitive humidity sensor and steam humidification. Advanced program controls allow for precise climate condition management, even over extended periods. Standard KBWF series chambers feature variable-position lighting cassettes, each equipped with five daylight fluorescent tubes. Special plant growth fluorescent tubes are also available, providing an ideal spectrum for photosynthesis, making these chambers suitable for simulating perfect climatic conditions in plant biotechnology, forestry, and agriculture. Climate chambers with integrated lighting and humidity control are also suitable for the pharmaceutical and chemical industries, basic quality assurance research, and materials testing. Devices are equipped with a controller featuring time-segment programming and a color LCD monitor for convenient operation. Key features: - Preheating chamber technology e™ - Adjustable fan speed - Humidity control via capacitive sensor and steam humidification - Intuitive touch-screen controller with time-segment and real-time programming - Internal data logger, measurement values in open format readable via USB - Device self-test for comprehensive status analysis - Airtight inner safety glass door - Glass corrosion prevention with special TIMELESS coating - Data display on a color LCD monitor - Stainless steel wire shelves - 30 mm access port with silicone stopper on the left side - Class 3.1 temperature sensor with visual and acoustic temperature alarm - Computer connection interface: Ethernet - Door heating

Condition: excellent (used), Year of construction: 2014, HERMANN WALDNER Agitated Tank 90.5 L Pressure-resistant magnetic stirrer with heating jacket Tank volume: 90.5 liters Jacket volume: 18 liters Usable volume: approx. 70 liters Product-contact parts made of stainless steel Operating overpressure: inside: -1 / +5 bar Manufacturer: Waldner Year of manufacture: 2014 Space requirement: 90 x 95 x 175 cm Complete documentation available. Hfsdpfjyn Rikox Agwod

Condition: excellent (used), Year of construction: 2008, tank capacity: 425 l, usable tank capacity: 300 l, M. ROTH ENGINEERING Agitator Tank 425 L Pressure-resistant magnetic stirrer with heating jacket Tank capacity: 425 liters Jacket capacity: 28 liters Usable volume: 300 L Product-contact parts made of stainless steel Hsdpfxsyn Rh Ts Agwofd Operating overpressure: inside: -1 / +4 bar, jacket: -1 / 6 bar Manufacturer: unknown Year of manufacture: 2008 Required space: 130 x 100 x 185 cm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, tank capacity: 500 l, GLATT FB 500 L + SINGLE STW 120 agitator vessel + heating unit Hsdpfxoyn Rhgs Agwjfd pressure-resistant magnetic agitator with heating jacket Vessel capacity: 500 liters Jacket capacity: 118 liters Usable capacity: 500 L Product-contact parts made of stainless steel 1.4435/1.445 Operating overpressure: inside: non-pressurized, jacket: -1 / 6 bar Manufacturer: Glatt Year of manufacture: 2008 Space requirements: 155 x 140 x 220 cm

Year of construction: 1997, condition: good (used), functionality: fully functional, ENGELSMANN SA 1100 RGM drum hoop mixer for 50, 100, and 200 liter drums, suitable for 2 x 50 L (drum Ø approx. 38 cm), 1 x 100 L (drum Ø approx. 50 cm), and 1 x 200 L (drum Ø approx. 56 cm). 4 rotary hoops are included in the price. Mixing speed: 26 rpm. Drive: 0.55 kW. Hjdjyn Rg Nopfx Agwsfd Manufacturer: Engelsmann Year of manufacture: 1997 Space required: 100 x 100 x 120 cm