Used Pickle Injectors for sale (180)

Condition: new, total length: 9,900 mm, total width: 8,450 mm, total height: 1,580 mm, Brand new stainless steel agitator tank with anchor agitator Application: Stirring mustard mash Type: CILC200BRWAA4 Item number: 10760 Volume: 221L Type: Upright design on reinforced feet with castors Design: Single-walled Material (wetted parts): 1.4404 stainless steel V4A Surface: Satin finish outside, IIId inside Internal weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top shelf: Central crossbar with two hinged lid halves Underbody: Conical base with DN32 DIN11851 pipe pulled forward Tank dimensions: Cjdpoq Rc Egefx Addshf Tank diameter: 650mm Total height: 1580mm Cylinder height: 650mm Height of feet: 460mm Equipment: - Central crossbar with two hinged lid halves, sheet metal grids as protection against access, screwed, removable - Latching function for hinged lid -1 x outlet valve DN32 ball valve DIN11851, EPDM/PTFE seal Agitator: Anchor agitator Make: Schwarzer Rührtechnik GmbH Type: SRTGMK/0,37-21 Power: 0,37KW Speed: 21UPM (infinitely variable) Operating voltage: 1PH 230V -Motor and gear unit in the latest aluminum technology, manufactured by Getriebebau NORD Food-approved oil filling -Massive agitator shaft attached to the agitator motor with sleeve coupling, removable -Stirrer shaft balanced for concentricity in the speed range -1 piece space-saving anchor agitator, welded design, weld seams ground -Stainless steel flange with shaft seal, EPDM Agitator control unit: CEE plug switch on the container, on/off switch, emergency stop, phase inverter, zero-voltage release Infinitely variable speed control of the agitator motor by means of a compact frequency inverter mounted on the motor, manufactured by Getriebebau NORD. Incl. potentiometer. Pre-programmed for agitator operation. Operating voltage 1PH 230V Drive power is increased to 0.37KW by this position

Condition: used, mileage: 6,69,852 km, first registration: 05/2010, fuel type: diesel, color: blue, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, parking heater, tail-lift, * Our internal number: 1058 * MAN TGS 26.440 * FIRST HAND * All repairs were carried out in an external workshop, including customer service - invoices are available. * New front axle brakes including discs at 653,745 km * New batteries at 622,854 km * New rear axle brakes at 610,516 km * New combination cylinder at 610,516 km Codovdhurjpfx Addshf * Valve cover gasket replaced,... * AdBlue injector replaced,... * Service,... * Invoices for EUR 21,200 are available * Trailer hitch * BÄR tail lift * 669,852 km - Original * etc. * All information without guarantee * We reserve the right to sell the vehicle prior to purchase * Please refer to our terms and conditions

Condition: used, Year of construction: 2008, power: 226 kW (307.27 HP), gearing type: other, fuel type: diesel, first registration: 01/2008, mileage: 1,33,000 km, driver cabin: other, emission class: euro4, Vehicle location: Bovenden, environmental badge green Csdpfx Adovhhnaedjhf approx. 133,000 km run, Torque Reduction: TR40, Prop. Version: 21042761, Max. Torque: 1.530 Nm, Rated Power: 226 KW, Rated Power Speed: 1.900 rpm, Displace Ment. 9,4 liter, Lowible 590-710 rpm, Injector Type: E3-1, Exhaust Brake. VEB ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: good (used), functionality: fully functional, Offered is a Günther PI-17 needle pickling injector. The impeller is new, as is the pressure gauge. 380V, 16A. Further details upon request. Cash payment or advance payment. Chedov Saflepfx Addef Sale to businesses only. No guarantee or warranty.

Condition: used, Wolfking Belham Multi needle injector Model:B1-15S Serial:8207-01303 120 needles, walking bed product advancement, width of area 500mm Cjdpfxsb Uaivo Addshf

Condition: new, Year of construction: 2025, Injector gravitational tumble belt blasting system for blasting series parts with glass beads, corundum, ceramic balls, etc. Due to the gravitational system, the system has 15-20% more blasting power than a simple injector blasting system. The system has a bucket elevator with wind sifting for cleaning the blasting agent. It is possible to store up to 20 programs for various blasting tasks. Chjdehunz Nepfx Addsf

Year of construction: 2004, condition: good (used), functionality: limited functionality, Color blue hammer finish Operating voltage: 3 x 400 V + N + PE / 50/60 Hz Cjdpfxjvpvn Rs Addshf Version with hinged tilting hood, for easy loading of the system with a crane or forklift truck. - Tilting hood, automatically opens pneumatically up to an angle of 90°, with integrated viewing window, equipped with safety and wear glass, in a quick-change frame. Operation via push button (two-hand control) on the switch and control cabinet. For easy crane or forklift truck loading. - Dirt collection drawer with sieve in the funnel, for collecting coarse, blasted contaminants. - Work platform, hinged, 1 bar, height 220 mm. - Blasting gun unit, type EF 4, with hard metal blasting nozzle HSD 8/15 for large-area blasting work, adjustable using a pressure reducing valve, 0 - 8.5 bar, blasting pressure can be read on the pressure gauge. - Blasting gun and blow-out gun wall holder, permanently mounted between the arm openings on the tilting hood. - Blasting agent pre-acceleration with feed injector unit, adjustable using a pressure reducing valve, 0 to 4 bar, feed pressure can be read on the pressure gauge. - Automatic, selective fine grain separation unit, type SHOT SEPARATOR. - Blow-out gun, for practically dust-free removal of the processed parts. - Separately arranged switch and control cabinet, swiveling, with separately arranged electrical, electronic and pneumatic control units as well as all operating and control elements. - Main switch, on / off. - Key switch, on/off, with 2 keys. - Operating hour counter. - Separately installed high-surface microfilter unit, type IMF-2, with automatic, electro-pneumatic filter cleaning. Fan electronically infinitely adjustable. Including integrated dust collection bucket, mobile. - Drain basin for blasting media. - Blasting media scoop, for easy filling of the blasting media into the microblasting system. - Side loading doors. - Turntable unit made of aluminum Ø 1,000 mm, for piece weights up to maximum 300 kg, manually rotatable. - Blasting media drying system, 50 W.

Year of construction: 2004, condition: good (used), FOMACO injector with tenderizer and FOMACO filter. CONTACT US FOR MORE PICTURES. FOMACO injector - Type - FGM 64/384-384 DC Volt - 3x400V, 50hz. Working hours : 8386. Cedehgz Ehjpfx Addehf Amp - 30A. Max amp - 63A. Air(bar) - 6bar. FOMACO filter - Type - PFS 5/270 RDC. Volt - 3x400V, 50hz. Amp - 1.6A. Max amp - 16A.

Condition: new, Factory-new stainless steel transport container with anchor agitator Type: SLA1150RWA Volume: Approx. 1150L Design: Vertical construction with forklift pockets Execution: Single-walled, min. 1.5mm wall thickness Material (media-contacting): 1.4301 stainless steel Surface: Satin finish outside, IIId inside Internal weld seams: Pickled, passivated, and brushed Operating pressure: Atmospheric Top cover: Central traverse with two hinged lid halves Bottom: Torispherical head with discharge groove Tank dimensions: Tank diameter: 1190mm Cylinder height: 1000mm Total height: 1300mm (plus agitator motor) Features: - Central traverse with two hinged lid halves, stainless steel perforated plates underneath the hinged lid as reach-in protection, bolted, removable - Tank mounted on a stainless steel transport base with forklift openings - DN50 disc valve outlet fitting DIN1185, seal EPDM - Nameplate Agitator: Central anchor agitator Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTGMK/0.75-13 Power: 0.75KW Speed: 13 RPM Operating voltage: 3PH 400V Product-contacting material: 1.4301 stainless steel - Gearbox by Getriebebau NORD - Solid agitator shaft connected to the agitator motor with a sleeve coupling, removable - Agitator shaft balanced for smooth rotation within the speed range - Large-surface stainless steel anchor-style agitator, welded design, weld seams pickled, passivated, and brushed Chsdpfx Adjw Dy Ngjdjf - Stainless steel flange with shaft seal, EPDM Agitator control: CEE plug switch on the tank, on/off switch, no-voltage release, emergency stop Fully prewired

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE15 series is an electrically powered high pressure cleaner. This model is the ideal tool for general cleaning jobs. Built into a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Models available: ----- CE15-series L/min CE15-150 bar 40 15 hp water blaster unit 50Hz CE15-150 bar 40 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 35 15 hp water blaster unit 50Hz CE15-170 bar 42 15 hp water blaster unit 60Hz CE15-170 bar 35 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 42 15 hp water blaster unit 60Hz with start/stop CE15-200 bar 30 15 hp water blaster unit 50Hz CE15-200 bar 36 15 hp water blaster unit 60Hz CE15-200 bar 30 15 hp water blaster unit 50Hz with start/stop CE15-200 bar 36 15 hp water blaster unit 60Hz with start/stop CE15-300 bar 18 15 hp water blaster unit 50Hz CE15-300 bar 22 15 hp water blaster unit 60Hz CE15-300 bar 18 15 hp water blaster unit 50Hz with start/stop CE15-300 bar 22 15 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 11,2 kW (50Hz) / 13 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Chedpfshf Na Sox Addjf Weight: 85 kg Standard accessories included.

Condition: used, total width: 13,500 mm, total height: 4,500 mm, total length: 30,500 mm, Processes used: Nickel Chromium Chjdpfx Asv Umkyoddof Nickel-phosphorus Sulfuric acid pickling Software ICOM Automation GmbH

Condition: new, Year of construction: 2024, functionality: fully functional, Price for the purchase of a powder coating system - Negotiable !!! - Electrical data 100-240V 50-60Hz - Powder absorption up to 200g / min - Air consumption up to 250L / min at 6 bar - Air quality / vapor less than 1.3 g / nm3 - Air quality / oil less than 0.1 mg / nm3 Powder coating gun data - Output voltage 100 kV - max. output current 100 µA - Length of hose 6 m - antistatic hose - Polarization Negative - Conformity ATEX 2mJ Description of hose - Applicator for quick color changes directly from the box - Intuitive 7" touch display - Automatic cleaning function - gun rinsing - Up to 20 user-defined programs - 3 automatic programs - Remote control of the paint quantity and program change from the handpiece -- Equipment - Controller of the PSS series - ProfiJector RI-1 blunt powder injector - ProfiGun powder gun with quick coupling and remote control - One set of hoses - Stand with vibrator and suction unit with fluidization PSS driver - 7-inch touch panel that can be operated with a glove - 3 automatic programs (overpainting, hard-to-reach surfaces, flat surfaces) - Graduation in 0.1kV and 0.1uA steps - Advanced pneumatic valves for air dose control (romer - patent pending) - The actual air flow measurement reacts to errors such as pressure loss or blockage of the system - Advanced diagnostic tools - Ability to name programs - Ability to control external master controllers with ModBus protocol (A-Series) ProfiGun PM-1 gun - A lightweight ergonomic gun, perfectly balanced with a contoured handle - The ceramic cascade with a voltage of up to 100,000V efficiently loads all types of powders - The new generation of nozzles ensures perfect powder penetration into complex shapes - The profiled nut provides a good grip Codjg U I Ugopfx Addshf - The conductive handle with high carbon content provides excellent grounding for the painter - The spray gun is made of special materials with increased impact resistance - Fully demountable design with replaceable powder path tube - The spray gun is patented in the USA and the EU - Cascade polarity - negative ProfiJector powder coating pump Description of the pump - Design of a new efficient injector - The most effective feed angle proven by research - Saves paint and air compared to right angle injectors - It is characterized by relatively low operating costs compared to other pumps - The injector is covered by a European patent

Condition: good (used), Year of construction: 2011, Metalbud Nowicki MH-75 SAS Multi-Needle Injector Metalbud Nowicki supply a range of injectors with a SAS SYSTEM  Produces greater control of injection process.  SAS SYSTEM Meat Injectors are intended to implement the most complex processes of injection.The Metalbud Nowicki MH-75 SAS Multi Needle Injector is suitable for meat muscles and elements of red meat with bone or boneless, poultry and parts of white meat with bone or boneless. SAS SYSTEM advantages  High rate of repeatability throughout the operational process. Low injection rates up to 10%, as well as high injection rates up to 120%, small deviation of injection level from 0.5 to 2% high production rates in kg/h Maximum speed of injection is up to 60 cycles per minute. Injection of raw meats with different thickness without extruding brine. Allows pre-programming of injection moment, i.e. determining the layer of raw meats which will be injected and the drive of transporter is synchronised with the drive of injection head which enables many combinations of injection patterns. Multi-step filtration system Easy disassembly of injection head. Chjdpfx Aow Eb S Esddjf Manufacturer: Metalbud Nowicki Model:MH-75 SAS Year:2011 Number of needles:75 Number of heads:1 Belt Width:370 mm Max. speed of injection:60 cycles/minute Max. output:3.000 kg/h Volume of injection:5/100% Machine Dimensions LxWxH:2.650x1.900x2.100 mm Machine Weight:1.000 kg.

Condition: good (used), • Fomaco injector • Type : FGM 80/320. • Conveyor length : 240cm. • Conveyor width : 70cm. • Conveyor height: 115cm. • Opening : • Width : 70cm. Height : 19cm. • Total dimensions : • Length : 245cm. • Width : 120cm. • Height : 220cm. Cedpfod Ixi Dex Addjhf • FÆR.

Condition: new, Factory-new stainless steel agitator tank with propeller agitator Type: CILC100BRWP Volume: 109L Design: Vertical construction on legs Version: Single-walled Product-contact material: 1.4301 stainless steel Chodsw Dy H Sjpfx Addsf Surface: Satin-finished exterior, interior BA finish Internal weld seams: Pickled, passivated, and brushed Operating pressure: Atmospheric Top cover: Hinged lid, half bolted, half foldable Bottom: Conical bottom with forward-extended DN25 pipework, DIN11851 Tank dimensions: Tank diameter: 477mm Overall height: 930mm (plus agitator motor) Cylindrical height: 600mm Leg height: 330mm Equipment: - Hinged lid with stainless steel sheet grate as reach-in protection, bolted, removable - Hold function for hinged lid - 1x DN25 discharge ball valve, DIN11851 Agitator: Propeller agitator Brand: Schwarzer Rührtechnik GmbH Type: SRT4-1000 Power: 0.25kW Speed: 980 RPM Operating voltage: 3PH 400V Product-contact material: 1.4301 stainless steel - Heavy-duty agitator shaft mounted to agitator motor, non-removable - Shaft balanced for concentricity within speed range - 1 piece 3-blade mixing propeller Ø125mm screwed onto end of agitator shaft - Stainless steel flange with V-ring seal, EPDM Agitator control: CEE plug switch on the tank, on/off switch, emergency stop, phase inverter, no-voltage release

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE10 series is an electrically powered high pressure cleaner. This model is the ideal tool for general cleaning jobs. Built into a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Models available: ----- CE10-series L/min CE10-200 bar 21 10 hp water blaster unit 50Hz CE10-200 bar 25 10 hp water blaster unit 60Hz CE10-200 bar 21 10 hp water blaster unit 50Hz with start/stop CE10-200 bar 25 10 hp water blaster unit 60Hz with start/stop CE10-250 bar 15 10 hp water blaster unit 50Hz CE10-250 bar 18 10 hp water blaster unit 60Hz CE10-250 bar 15 10 hp water blaster unit 50Hz with start/stop CE10-250 bar 18 10 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 7,5 kW (50Hz) / 9 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Cedpfx Ajhf Na Ieddjhf Amp: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Standard accessories included.

Condition: new, functionality: fully functional, total height: 2,345 mm, tank capacity: 950 l, inner diameter: 1,080 mm, TECHNICAL SPECIFICATIONS - Effective capacity: 950 litres - Cylindrical-conical bottom - Top hatch with quick-release closure, diameter 400 mm - DIN 50 stainless steel safety valve - Refill column with removable washing ball and 2" Tri-Clamp butterfly valve - Ladder support - Cooling jacket H. 500 mm - Maximum pressure on honeycomb belt: 3 bar - Thermometer - DIN 15 stainless steel taster - Clear draining on the cone with stainless steel butterfly valve, 2" Tri-Clamp connection - 4 adjustable feet with reinforcement bars - Total drainage with 90° elbow + stainless steel butterfly valve, 2" Tri-Clamp connection - Socket for PT 100 probe - 2 lifting rings - Exterior finish: brushed - Interior finish: BA polished, pickled and passivated weld DIMENSIONS - Total height: 2345 mm Cedpfx Ajwvrh Eeddohf - Diameter: 1080 mm - Thickness: 20/10ᵉ

Condition: good (used), mileage: 2,02,500 km, first registration: 10/1995, fuel type: diesel, color: white, axle configuration: 4x4, tire size: 11R22,5, fuel: diesel, wheelbase: 3,250 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, Year of construction: 1995, Equipment: ABS, all wheel drive, differential lock, trailer coupling, = Further options and accessories = - 8-speed manual gearbox - Heated exterior mirrors - LEAF SUSPENSION - Driver comfort seats - Differential lock - Electrically adjustable exterior mirrors - Speed limiter - Hydraulic system - Hub reduction - Radio/CD player Cedpjuy I Egofx Addehf - Toolbox - Power take-off shaft (PTO) - Power take-off shaft (PTO) - Tow bar = Remarks = GOOD CONDITION IVECO EUROCARGO 135E23WR 4x4 CONTAINER TRUCK (EURO 2) WITH FULL STEEL SUSPENSION & REDUCTION AXLES!! 230HP, EURO 2, 6-CILINDER ENGINE (MECHANICAL PUMP AND INJECTORS)!! ZF-MANUAL GEARBOX!! FULL STEEL SUSPENSION!! REDUCTION AXLES!! P.T.O.!! ETC!! 12,000 KG. MEILLER CONTAINER SYSTEM!! TRUCK IS IN GOOD DRIVING & WORKING CONDITION, READY FOR THE HEAVY JOBS!! MORE IVECO 4x2 / 4x4 / 6x4 / 8x4 (EURO 2/3/4/5/6) IN STOCK FOR SALE!! (>85 TRUCKS/TRAILERS IN STOCK)!! SHIPMENT, STACKING, LOADING, TRANSIT REGISTRATION OR TRANSPORT? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY MOVIE ON YOUTUBE FOR THE FIRST IMPRESSION!! ( ) YOU CAN ALSO CHECK OUR WEBSITE; ANGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = More information = Technical information Number of cylinders: 6 Engine displacement: 8,990 cc Drivetrain Fuel tank: 200 liters Gearbox Gearbox: ZF 8 GEARS MANUAL GEARBOX, 8 gears, manual gearbox Axle configuration Brakes: Drum brakes Suspension: Leaf spring Front axle: Tire size: 11R22.5; Differential lock; Max. axle load: 7500 kg; Steered; Tire profile left: 30%; Tire profile right: 30%; Reduction: Outer planetary axles Rear axle: Tire size: 315/80R22.5; Twin tires; Differential lock; Max. axle load: 13000 kg; Tire profile left inside: 40%; Tire profile left outside: 40%; Tire profile right inside: 40%; Tire profile right outside: 40%; Reduction: external planetary axles Weights Empty weight: 7,270 kg Payload: 7,730 kg GVW: 15,000 kg Functional Brand of body: MEILLER 12,000 KG. PORTAL CONTAINER SYSTEM Height of loading area: 140 cm Condition Technical condition: good Visual condition: good Further information Contact Sales Department or Erik Engel for further information.

Year of construction: 1997, condition: like new (used), Fomaco FGM 16/64 injector. Conveyor dimensions : Length : 130cm. Width : 24,5cm. Height : 120cm. Opening : Width : 28cm. Height : 14cm. Csdpfod Ixcfjx Addehf

Condition: new, Factory-new agitated vessel with dissolver Type: STOC2200RWD Volume: approx. 2,266 liters Design: Vertical construction on three height-adjustable feet Cjdpfx Adow Dy Hlodjhf Construction: Single-walled Medium-contacting material: 1.4301 stainless steel (AISI304) Surface: External satin finish, internal BA (IIId) Internal weld seams: Pickled, passivated and brushed Max. operating pressure: Atmospheric Max. operating temperature: 95°C Top: 15° conical top Bottom: 15° conical bottom with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1,430 mm Cylinder height: 1,250 mm Total height: 2,160 mm Foot height: 500 mm Outlet to floor distance: 350 mm Equipment: 1x Ø 500 mm manway cover with swivel bracket on top, EPDM gasket 1x agitator flange connection IEC200 3x calotte / height-adjustable feet 1x stainless steel vent/bleeder valve DN50, non-pressurized, on the top 1x DN50 DIN11851 outlet port centered in the bottom 1x DN50 DIN11851 port with blanking cap on the top 1x DN65 DIN11851 port with blanking cap on the top 2x lifting lugs on the top 1x ladder bracket on the cylinder 1x nameplate Agitator: Dissolver Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTDMK/7.5-1500 Power: 7.5 kW Speed: 1,410 RPM Operating voltage: 3PH 400V - Heavy-duty agitator shaft mounted to the agitator motor with muff coupling - Agitator shaft dynamically balanced for smooth running within the speed range - 1 piece dissolver disc Ø 275 mm screwed onto the end of the agitator shaft - Stainless steel flange with V-ring seal, EPDM - Motor mounted flexibly on neoprene rubber-metal buffers

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE08 series is an electrically powered high pressure cleaner. This model is the ideal tool for general cleaning jobs. Built into a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Models available: ----- CE08-series L/min CE08-200 bar 15 7,5 hp water blaster unit 50Hz CE08-200 bar 15 7,5 hp water blaster unit 60Hz CE08-200 bar 15 7,5 hp water blaster unit 50Hz with start/stop CE08-200 bar 15 7,5 hp water blaster unit 60Hz with start/stop General specifications: Cjdpfx Adehf Nakjdjhf ----- Drive motor power: 6.0 kW Volt: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Standard accessories included.

Condition: new, functionality: fully functional, TECHNICAL SPECIFICATIONS - Effective capacity: 1210 litres - Cylindro-conical bottom - Top hatch with quick-release closure, diameter 400 mm - Stainless steel DIN 50 safety valve - Winding column with - Removable wash ball - 2’ Tri-Clamp butterfly valve - Ladder support - Cooling jacket H. 750 mm - Maximum pressure on honeycomb belt: 3 bar - Temperature gauge - Stainless steel taster DIN 15 - Clear draft on cone with stainless steel butterfly valve, 2’ Tri-Clamp connection - 4 adjustable feet with reinforcement bars - Total drain with 90° elbow + stainless steel butterfly valve with 2’ Tri-Clamp connection - Socket for PT 100 probe Chedpfx Adowdffajdof - 2 lifting rings - External finish: brushed - Inside finish: BA weld, polished, pickled, passivated DIMENSIONS - Total height: 2510 mm - Diameter: 1084 mm - Thickness: 20/10ᵉ

Condition: like new (used), Equipment: type plate available, Used stainless steel transport container Prepared for agitator Type: SBPA150 Item number: 10796 Volume: 173 liters Chjdpfx Adjr A Engodjf Type: Upright design on pallet Design: Single-walled, 1.5mm wall thickness Material (wetted parts): 1.4301 stainless steel Surface: Satin-finished outside, IIId inside Internal weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: 1/2 hinged lid Underbody: dished bottom with outlet bead Tank dimensions: Tank diameter: 650mm Total height: 815mm Pallet: 675 x 719mm Equipment: 1x 1/2 hinged lid on the top, latching function (lid can be latched in open 90° position) Stainless steel sheet metal grates underneath the hinged lid, screwed, removable DN50 ball valve outlet fitting DIN11851 Galvanized transport pallet Type plate

Condition: like new (used), Equipment: type plate available, Used stainless steel agitator tank on stainless steel pallet with rollers and propeller agitator Type: SBPA1000RWP Article number: 10862 Volume: 907L Type: Upright design on stainless steel transport pallet with rollers Design: Single-walled, at least 2mm wall thickness Material (in contact with media): 1.4301 stainless steel Surface: Satin finish on the outside, BA (IIId) on the inside Inside weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: Central crossbeam with two hinged lid halves Bottom: Dished bottom with discharge bead Container dimensions: Container diameter: 1080mm Total height: 1915mm Total width: 1200 x 1150mm Distance from drain to floor: 400mm Height of feet: 240mm Chsdpfx Adov Ha Uiedof Equipment: 1x hinged lid, central crossbar with two hinged lid halves, stainless steel sheet metal grates below the hinged lid as protection against intrusion (removable), locking function (lids can be locked open) 1x reserve nozzle DN50 DIN11851 on the top floor 1x DN50 DIN32676-A Tri-Clamp ball valve as outlet fitting, PTFE seal 1x stainless steel transport pallet 4x swivel castors, 2x with brake 1x nameplate Agitator: Propeller agitator Suitable for viscosities up to 500mPas Make: Schwarzer Rührtechnik GmbH Type: SRT8-1500 Power: 0.75KW Speed: 1410 UPM Operating voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for concentricity in Speed range -1 mixing propeller Ø 150mm screwed into the end of the agitator shaft. Mixing propeller made of cast stainless steel, highly polished -4x neoprene rubber metal buffers, motor mounted in a swinging manner, hardness grade 70 according to Shore, neoprene resistant up to 100°C Agitator control: CEE plug switch on the container, on/off switch, emergency stop, zero voltage release and phase inverter Continuous speed control of the agitator motor using a compact, external frequency converter, Optidrive brand. With digital display of the frequency or speed. Incl. potentiometer, on/off switch. Pre-programmed for agitator operation. Operating voltage 3PH 400V Mounted on the container on a stainless steel holder.

Condition: like new (used), Used heatable/coolable stainless steel container Type: STOC3300TPRW Item number: 10844 Volume: Approx. 3300 liters Type: Upright design on three height-adjustable feet Design: Single-walled with thermoplate Material (wetted parts): 1.4301 stainless steel (AISI304) Surface: Satin-finished outside, BA (IIId) inside Internal weld seams: Pickled, passivated and brushed Max. Operating pressure: Atmospheric Max. Operating pressure thermoplate: 1.8 bar Max. Operating temperature: 95°C Top plate: 15° conical bottom Bottom: conical bottom 15° with central outlet DN50 DIN11851 Tank dimensions: Cedpfx Adjuy Ribedohf Tank diameter: 1600mm Cylinder height: 1500mm Total height: 2430mm Equipment: 1x Ø 500mm manhole cover with swivel bracket on the top, EPDM seal 1x ladder bracket 1x thermoplate on cylinder H=900mm on cylinder 1x agitator flange connection IEC250 3x spherical caps / height-adjustable feet with foot plates 1x vent valve DN50 stainless steel unpressurized on the top plate 1x DN50 DIN11851 spigot outlet in the center of the underbody 1x DN50 DIN11851 spigot on the top shelf with blind cap 1x DN65 DIN11851 spigot on the top shelf with blind cap 1x type plate