Used Pickling Injector for sale (196)

Condition: used, Year of construction: 2015, functionality: fully functional, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machines for gluing and processing straight edges with roll material (melamine, PVC, ABS, veneer) and strip material (solid wood, laminate, sliced veneer, etc.) • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness 10-60 mm Workpiece thickness with MFU aggregate (depending on profile) 10-35/60 mm Edge height 14-64 mm Edge thickness – roll material 0.4-3 mm Edge thickness – strip material (*) 0.4-10 (12) mm Workpiece overhang 25 mm Minimum panel length 140 mm Minimum width (at 140 mm length) 85 mm Minimum width (at 250 mm length) 50 mm Feed speed 12 m/min Dust extraction* 8x connection Ø100 mm Compressed air connection 7 bar Glue pot capacity 2 (approx.) kg * Depending on selected aggregates. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge to the workpiece, automatically cuts it from the roll, and presses it onto the workpiece, guaranteeing perfect positioning. - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs with 0° to 15° angle. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a thickness of max. 3 mm. JOINTING CUTTER UNIT RT02 Joins the workpiece before glue application. Equipped with two 1.8 kW high-frequency motors at 12,000 rpm. SCRAPER UNIT RB02 For post-processing thick PVC/ABS edges. FLAT SCRAPER RC02 Aggregate for removing excess glue in the edge-to-panel area. Equipped with tracing rollers and a flat knife with engagement control. Dcjdsxzb Iispfx Adder BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using fabric polishing discs. The unit automatically adapts to the workpiece thickness. ANTI-ADHESIVE SPRAY UNIT ADZ02 Precision application of anti-adhesive using injectors activated by numerical control. KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing through: - controlled pressure of the glue roller - automatic disengagement in case of feed stop - automatic ON/OFF of the glue unit • REVERSE system to switch the glue roller for co- or counter-rotation Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue with machines equipped for EVA gluing. NC Axis for Fine Trimming Unit Kit for the automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system. Pair of multiprofile cutters for the fine trimming unit: 25-degree bevel, radius 2 mm + radius 1 mm plus straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of the tracer to match the edge thickness. Adjustment takes place via the control system. Function for processing only on the corners. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system.

Condition: used, mileage: 6,97,000 km, Year of construction: 2004, Serial number: YK2HEDD104K05xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20749 Specifications: - 2004 model - Km: approx. 697,000 - EU-approved until 21.02.2026 - 1987 EKA body - 6x4 - Engine brake - Suspension: steel - 631 hp - Wheelbase: 465/137 cm - Largest winch: 30 tons - Smallest winch: 10-15 tons - Tool cabinet included - New injectors and wiring - Compressor replaced - Rear support legs - Tires (see pictures) - Extra lights - Rotor beam - Chains - Remote control - Manual - AC/climate - Bed Dsdewvy T Nspfx Addscr - Ready for delivery Description: 2004 Sisu E18M 6x4 heavy excavator with EKA body and chains. The car has just been inspected by the EU and the owner spent 300,000 kroner on this inspection. The wiring harness, compressor and injectors are some of the things that were replaced and the engine was cleaned. The blue tool cabinet is mainly what comes with it, as well as chains so that the car is approved. Everything else in the cabinets is negotiable on price. The largest winch is 30 tons and the smallest is between 10-15 tons, the owner doesn't remember exactly. You can't use both winches at the same time. Watch the video. Ready for delivery. Km: 697000 HK: 630 Technical approved: Yes EU-approved until: 21.02.2026 Own weight: 19030 Total Weight: 34200 Payload: 15095 Width: 255 Length: 955 Euro: 3 Model: E18M 6x4 tungberger m/ EKA påbygg og kjettinger. SE VIDEO

Condition: used, Diesel generator set, power generator, emergency generator EUROPOWER type EPUS 150 TDE-3A Fuel injectors on the diesel engine are missing Serial No. 3722 Year of manufacture: 2017 Rated power (Cont): 150 kVA Rated current (BR): 217 Amps Voltage: 400/230 Volt, 50 Hz Dodpfxexr N U Sj Addscr Drive engine: 6-cylinder in-line diesel engine VOLVO Penta, type TAD 752 GE Engine output at 1500 rpm: 183 kW Displacement: 7150 cc Tank capacity: 1300 liters Generator manufacturer: LEROY SOMER Type: LSA 44.3L10 C 6/4 - Compact design with soundproofed metal enclosure and centrally mounted lifting eye - Robust, galvanized base frame with forklift pockets for easy and safe transport by forklift - Socket connections: 1x 230 V Schuko / 1x 16 Amp. 3-pin blue / 1x 32 Amp. 3-pin blue - Socket connections: 1x CEE 16 Amp. 5-pin red / 1x CEE 32 Amp. 5-pin red / 1x CEE 63 Amp. 5-pin red / 1x CEE 63 Amp. 5-pin red - 2 starter batteries, 12 Volt each, for 24 Volt starter motor - 11,755 operating hours as of April 2019 - Missing components on the engine: 6 fuel injectors missing, 6 high-pressure pipe connections missing, 1 injector tip missing Dimensions (L x W x H): 3600 x 1230 x 2450 mm Weight: approx. 3450 kg Engine can be cranked by the starter, fuel is being delivered.

Condition: used, This listing is for a Varian 3900 GC With FID and 1041 Packed Injector The Varian 3900 gas chromatograph (GC) is designed to meet the demands of the analytical laboratory with its compact design—GC occupies less than half the workspace of the average gas chromatograph unit. Models 39001-00 and -05 feature an icon-based keypad which simplifies training and increases daily productivity. Select one of six pre-programmed languages for further ease-of-use. Password protection locks keypad from unauthorized access. Each Varian 3900 GC unit features a front access column compact oven with Precise Temperture Control which uses standard 7" (17.5 cm) diameter capillary columns. Maximum operating temperature is 450°C—accommodates any application. Plus, the oven cools down from 450°C to 50°C in only 5.2 minutes! Dimensions and Weight Size: 21.8 in./55 cm (h) x12.5 in./32 cm (w) x 22 in./56 cm (d) Weight: 59 lbs/26.8 kg Equipment can be serviced/renovated/refurbished on request at extra cost. Was previously used with a Perkin Elmer HS40XL Dcedsxzh A Hepfx Adder

Condition: used, mileage: 2,39,000 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 05/2011, next inspection (TÜV): 06/2027, emission class: euro5, color: black, number of seats: 3, Year of construction: 2011, total length: 5,910 mm, total width: 1,993 mm, total height: 2,435 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), * VW Crafter 35 panel van L2 H1 with 3 seats - tow bar - 3 seats - immediately available - * Diesel - Engine capacity: 2,461 cc - 120 kW / 163 hp - Euro 5 - Green emissions sticker * 6-speed manual transmission - Wheelbase: 3,665 mm - Load compartment with wooden lining & carpet * All 5 injectors replaced NEW at 223,000 km, turbocharger NEW at 220,000 km, rear brake pads NEW at 236,000 km, front axle brakes completely NEW at 230,000 km * German vehicle - German registration documents - * Vehicle immediately available and ready for pick-up - * Please arrange an appointment for viewing - * Contact person: Mr. Andreas Vogel * The information provided online is a non-binding description. * They do not constitute guaranteed features. * The seller is not liable for typographical or data transmission errors. * Subject to change, errors, and prior sale. Dodpfxexpb Das Addscr Special equipment: Audio system RCD 2001, outside temperature display, wooden flooring in the cargo area, spare wheel in operational condition, double passenger seat in driver's cab, high-grade wooden trim in cargo/body area Further features: Storage trays/compartments above windscreen, driver's airbag, traction control (ASR), rear right entry handle on rear pillar, driver assistance system: brake assist (HBA), rear wing doors without glazing, body/chassis: standard panel van, body variant: standard roof, fuel tank: 75 liters, high cargo partition wall without window, engine 2.5 L - 120 kW TDI DPF, parking light switch, wheelbase 3,665 mm, low emissions according to Euro 5, right sliding door in cargo/passenger area, seat cover/upholstery: fabric, driver's seat height-adjustable, front stabilizer, permissible total weight 3.5 t, additional brake light

Condition: used, mileage: 10,22,720 km, first registration: 03/2015, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, total width: 2,550 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, According to our "General Terms and Conditions of Sale" and subject to change without notice, we can offer you the following vehicle as available today, with no warranty or guarantee of any kind, and subject to prior sale, errors, or typos: Mercedes Benz 2545 Interchangeable Chassis (Vehicle 886) First registration: 27.03.2015 1,022,720 km Engine: 12,809 cc 330 kW / 450 HP Euro 6 Diesel Dsdpfjxw I Axox Addecr Roof spoiler, sun visor A-sign + folding hazardous goods sign LED daytime running lights Additional headlights Full air suspension Tyres: 315/70R22.5 1st axle approx. 30/40%, 2nd axle steer axle approx. 90/90%, drive axle approx. 90/90%, 3rd axle approx. 70/70% Multi-lift system for standard and large swap bodies Spier body 2 x trailer couplings (1 x standard + 1 x low) (no trailer included) Long-distance cab with 1 bed Automatic climate control, auxiliary heater Fully automatic transmission Multifunction steering wheel 2 x electric windows, mirrors, heated mirrors Manual roof hatch Radio/CD/two-way radio Central locking with remote control Refrigerator 2 x chocks Plastic storage box (closed, passenger side, center) 1 x LED work light at rear Folding A-sign and hazardous goods sign No trailer included New injectors and oil pump replaced in 04/2024 Price: €14,000.00 (net) All information provided without guarantee or warranty. Our “General Terms and Conditions of Sale” apply. The court of jurisdiction for both parties up to a value in dispute of €5,000.00 is the Local Court of Ludwigslust; for higher values in dispute, the Regional Court of Schwerin. Subject to change, errors, and prior sale.

Condition: excellent (used), mileage: 2,10,000 km, power: 283 kW (384.77 HP), first registration: 05/1997, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 870 l, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel-air, Year of construction: 1997, Equipment: ABS, air conditioning, differential lock, electric window regulation, parking heater, seat heater, = Additional Options and Accessories = - 2 beds - 870 litre fuel tank - Aluminium fuel tank - Heated mirrors - Power brake booster - Comfort driver’s seat - Differential lock - Differential lock - Electrically adjustable exterior mirrors - Speed limiter - Master switch - Tipping hydraulics Dsdpfx Asxx Srysddscr - Refrigerator under bed - Air-suspended seats - Metallic paint - Radio/CD player - Sleeper cab - Side skirts - Sun visor - Auxiliary heater - Power Take-Off (PTO) - Power Take-Off (PTO) - ZF16 manual gearbox = Notes = NICE CONDITION DAF FT95-380XF SPACECAB 4x2 TRACTOR UNIT (EURO 2) WITH ZF16 MANUAL GEARBOX, HYDRAULIC KIT & AIR CONDITIONING!! 380HP, EURO 2 (MECHANICAL PUMP AND INJECTORS)!! ZF16 MANUAL GEARBOX!! D.E.B-ENGINE BRAKE!! HYDRAULIC KIT!! P.T.O.!! 870 LITRE DIESEL TANK!! AIR CONDITIONING!! SIDE SKIRTS!! ETC!! TRUCK IS IN GOOD DRIVING CONDITION, READY FOR THE HEAVY JOBS!! MORE DAF CF/XF 4x2 / 6x2 / 6x4 / 8x4 (EURO 2/3/4/5/6) IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPMENT, STACKING, LOADING, TRANSIT REGISTRATION OR TRANSPORT? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY MOVIE ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) YOU CAN ALSO VISIT OUR WEBSITE; ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 11,580 cc Transmission Gearbox: ZF16 manual gearbox, 16-speed, manual transmission Axle configuration Tyre size: 315/80R22.5 Brakes: drum brakes Front axle: Max. axle load: 7,500 kg; Steering axle; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: leaf springs Rear axle: Twin tyres; Differential lock; Max. axle load: 13,000 kg; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 7,660 kg Payload: 11,340 kg gross vehicle weight: 19,000 kg Functional Body manufacturer: ZF Condition Technical condition: very good Visual condition: good Further information Please contact Sales Department or Erik Engel for more information.

Condition: used, mileage: 2,65,000 km, Year of construction: 2011, Serial number: WDB9066331S52xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21696 Specifications: Km: approx. 265,000 Gearbox: Manual Worn summer tires Good winter tires Zepro tail lift, 500 kg Side door Wired remote control 3 seats Euro 5, 163 hp Brake discs front and rear replaced (according to owner) Radio/CD Climate control / AC Service and maintenance done by owner Video Ready for delivery Description:Mercedes Sprinter 316CDI from 2011.Equipped with a Zepro tail lift.Comes with 2 sets of tires.Owner reports that 2 injectors deliver too much and 2 deliver too little.Ready for delivery. Km: 265000 HK: 163 Technical approved: Yes EU-approved until: 31.03.2027 Own weight: 2041 Total Weight: 3500 Payload: 1384 Dcsdpfxext Ddks Addsr Width: 199 Length: 591 Euro: 5 Model: SPRINTER Gearbox: Manual Number of seats: 3

Condition: used, Year of construction: 2002, Overview Aseptic PET filling line for fruit juices, juice-based beverages, and spritzers, built 2002–2007 by KRONES. Suitable for still and carbonated products (carbonation currently disconnected). Covers blowing, filling, labeling, packaging, palletizing. Bottle sizes 0.5–1.5 L, 28 mm closures. Nominal output: 20,000 b/h (1.0 L still). Fully assembled, out of operation, viewing by appointment. Technical details Capacity: up to 24,000 b/h (0.5 L still) Bottle sizes: 0.5–1.5 L PET Products: still/carbonated, with/without pulp Closures: 28 mm flat cap Years of manufacture: 2002–2007 Scope of delivery Pos. 1 Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP Pos. 2 Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h Pos. 3 Sterile tank: Roth 2002, 11,000 L Pos. 4 Carbonization: Roth/Ruland 2002, 2575 L, disconnected Pos. 5 Nitrogen system: Terboven/ISTE 2002 Pos. 6 Hygienic center: Ecolab/Lang 2002, CAF, no PLC Pos. 7/8 Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L Pos. 9 CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank Pos. 10 Cleanroom: Weiss 2002, ventilation/overpressure Pos. 11 Preform hopper: Dieterle 2002, MD3 Pos. 12 Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 Pos. 13 Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h Pos. 14 Air conveyor: Krones 2002, automatic rail adjustment Pos. 15 Cap conveyor: Gassner 2002, 2 container positions, cap elevator Pos. 16–18 Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated Pos. 19 Label check: Krones 2002, incl. in Prontomodul Pos. 20 Bottle check: Krones 2002 Pos. 21 Conveyor: Krones 2002, air blower before labeling Pos. 22 Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h Pos. 23 Canmatic module: Krones 2007, paper labels Pos. 24 Contriroll module: Krones 2007, film roll Pos. 25 MHD coding: Videojet Excel/170i Pos. 26 Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport Pos. 27 Packaging conveyor: Krones 2002 Pos. 28 Handle applicator: Twinpack MHTE 2002 Pos. 29 Empty pallet magazine: Krones LPM 2002 Pos. 30 Palletizing: Krones robot 3A loader 2002, 4,000 packages/h Pos. 31 Pallet conveyor: Krones 2002, transfer cart & turner Pos. 32 Empty pallet magazine: Krones LPM 2002 Pos. 33/34 Pallet stretch wrappers: Franpak 2002, top sheet applicator Pos. 35 Tying machine: Bornbinder HB 2002 Pos. 36 Pallet coding: Logopak EAN 128 2003 Dodpjxqqpujfx Addocr

Condition: used, Spare parts for blast machine or blast wheel Gutmann Type: AGS SWL 501 Dcsdpfx Ajbfkbboddjr Throwing blades Blast wheel housing Injector Blast wheel Elevator bucket Wear plates etc.. NEW!

Condition: like new (used), Automatic injector 123 needles Loading width: 420 mm Max. product height: 200 mm Needles quantity: 123 - 3 mm Transportation type: walking beam Pressure range: 0,5 - 4,5 bar El. 230/400 V, 50/60 Hz Dedpoumk Txofx Addecr Connection value: 11, 0 kW 50/60 Hz Machine dimensions, mm: Length: approx. 2 200 mm Width: approx. 1 100 mm Height : approx. 2 350 mm

Condition: good (used), Linde Cryoflex CTFA4-60 Cryogenic Freezer Serial: 3002097/2 Dcjdpfxewbnvco Adder 2011, This continuous conveyor belt in a sub-zero tunnel was developed specifically for operators keen to avoid unnecessary handling and transportation of parts requiring sub-zero treatment. The CRYOFLEX® T freezer can be easily integrated into continuous hardening lines. It is well suited to mass production of small or thin parts such as injectors, springs, nuts and bolts. The standard temperature range extends from room temperature to -110°C (-166°F), Stainless mesh belt dimensions 4000mm x 600mm, 3Ph

Condition: used, This listing is for a Waters Acquity H-Class UPLC. The unit is in full working condition and is ready for immediate release. Unit includes: PDA Detector Column Manager Sample Manager Binary Solvent manager Software and computer can be provided at extra cost Unlock the full potential of your laboratory with the Waters Acquity H-Class UPLC System, a cutting-edge high-performance liquid chromatography (HPLC) solution designed for unparalleled flexibility and efficiency. This advanced system is engineered to deliver exceptional chromatographic separations, making it the ideal choice for pharmaceutical, biotechnology, food and beverage, and environmental applications. Key Features: Quaternary Solvent Blending: Seamlessly combine up to four solvents to optimize method development and enhance analytical workflows. Flow-Through-Needle Injector: Effortlessly transfer existing HPLC methods to UPLC, significantly reducing method development time and boosting throughput. Empower and MassLynx Software: Benefit from advanced data processing capabilities, including peak picking and integration, ensuring precise analysis and reporting. Dcjdpfexx Af Dex Addor UNIFI Scientific Information System: Streamline data management for metabolomics, proteomics, and glycomics, facilitating comprehensive analysis. Benefits: Experience improved laboratory productivity as you transition to UPLC/UHPLC technology, reducing analysis time while increasing efficiency. Achieve enhanced resolution and sensitivity, allowing for more accurate analysis of complex samples. Simplify method development with advanced tools and software, accelerating the discovery of new methodologies. Applications: Whether you are conducting pharmaceutical research, analysing food safety, or monitoring environmental pollutants, the Waters Acquity H-Class UPLC System delivers high sensitivity and resolution for all your analytical needs. Elevate your chromatography capabilities today and transform your laboratory's performance with this innovative system.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Fomaco Salt Injector – Model FGM 48F S Year of Manufacture: 2003. Belt width: 420 mm. Needles:2x48 needles (3 mm diameter). Injection speed: 20–70 strokes per minute.Stroke length: 60 mm. Stroke height: 150 mm. Weight:700 kg. Capacity up to 1.400 kg/hr. Depending on product and injection level Dcodpfx Aoxmh T Nsddjr Equipped with FM80 protein filter Dimensions: 230 × 80 × 230 cm

Condition: used, mileage: 7,94,442 km, power: 235 kW (319.51 HP), first registration: 08/2008, overall weight: 18,000 kg, fuel type: diesel, color: grey, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, * Renault Premium 320 18 D 4x2 * BDF swap body chassis * Engine exhaust brake * Manual gearbox * 1 x bed * VIN: VF629AHA000002832 * Engine type: DXi7320EC06B * Euro 5 * kW: 235 * Displacement: 7200 cc * Unladen weight: 7700 kg * Payload: 10225 kg * Gross weight: 18000 kg Dcsdpfeqiyx Njx Addsr * Wheelbase: 5500 mm * Vehicle length: 9500 mm * Vehicle width: 2550 mm * Vehicle height: 4000 mm * Tyres: 315 / 70 R 22.5 * Note: at 794,442 km * New digital analogue * 6x diesel injectors completely overhauled * New diesel pump * New clutch set * Price net * Our details are provided without guarantee or warranty Tel./WhatsApp:

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 700 kg, workpiece height (max.): 2,300 mm, workpiece length (max.): 6,000 mm, insulation material: Mineralwolle, insulation thickness: 150 mm, workpiece width (max.): 2,000 mm, Complete Plant with Chemical Pretreatment (7 Stages) for GSB Certification (QUALICOAT) (Suitable for Multimetal) All dimensions and further modifications can be taken into account during design and planning. The offer includes the following components: - Pretreatment cabin incl. reverse osmosis unit - Walk-in coating booth - Powder spray gun - Powder curing oven - Dryer - Manual conveyor system - Lifting-lowering station - Electrical control system Details: 1. Walk-in cleaning cabin, pretreatment for steel and aluminum The cleaning cabin is designed for automatic cleaning. Medium pressure spraying can be applied. The cabin contains 7 different spray tanks. Maximum part size: L = 6000 mm, W = 2000 mm, H = 2300 mm. 1. Cabin dimensions - Length: 6,500 mm - Width: 3,000 mm - Height: 3,600 mm 2. Total pretreatment dimensions - Length: 6,600 mm - Width: 4,640 mm - Height: 4,300 mm Process Stages: 1st Stage: Degreasing/Neutral Pickle - Heated tank, 50-55°C, time = 3-6 minutes, drip-off time = 80 seconds 2nd Stage: Acidic Mineral Pickle - Heated tank, 50-55°C, time = 3-6 minutes, drip-off time = 80 seconds 3rd Stage: Rinse 1 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 1 minute 4th Stage: Rinse 2 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 45 seconds 5th Stage: Rinse 3 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 45 seconds 6th Stage: Nano-Ceramic - Processed at ambient temperature, time = 0.75-1.5 minutes, drip-off time = 60 seconds 7th Stage: Overhead spray ring for post-rinsing after Stage 6 - Rinsing with ambient temperature, time = 1 minute, drip-off time = 60 seconds 8th Stage: Passivation, no-rinse for aluminum - Rinsing with ambient temperature, time = 2-3 minutes, drip-off time = 1-2 minutes 1.1. Reverse Osmosis Unit - Reverse osmosis system, 250 liters/hour 1.2. Oil Skimmer - Tank no. 1 is equipped with an oil skimmer "UniSkim-21-100". Construction: The spraying system is two-part and movable, and can be shifted up to 500 mm via a pneumatic sliding system. Return to the tanks is also mobile via a pneumatic sliding system with 7 positions in order to serve the 7 tanks. 2. Walk-in coating booth 1. Booth dimensions - Length: 7,400 mm - Width: 4,000 mm - Height: 3,236 mm 2. Booth dimensions incl. extraction system - Length: 8,552 mm - Width: 6,232 mm - Height: 4,393 mm The booth features 2 single-side pneumatic doors for entry/exit of workpieces, and an additional side door for the coater. Dcjdpfx Adsffv Tpedor 3. Powder Coating Equipment Wagner, Manual System "Sprint 2 B" 4. Powder Curing Oven - Internal dimensions: - Length: 6,500 mm - Width: 2,200 mm - Height: 3,416 mm 5. Dryer - Internal dimensions: - Length: 6,500 mm - Width: 1,200 mm - Height: 3,416 mm 6. Manual Conveyor System The conveyor system consists of: The conveyor system is designed for a crossbar weight of 700 kg. The carriage can carry a maximum of 2,000 kg on 3 rails.

Year of construction: 1995, condition: good (used), The model VSC will make segents, slabs and square or rectangular strips from a variety of food products including Carrots/pickles/zucchini , potatoes/and many other food products machine can optional be delivered with Infeed V-belt as-is Dcjdsfxxlyspfx Addsr or tested and set to customer needs.

Condition: used, Year of construction: 2008, operating hours: 11,320 h, Serial number: VCEC210CC0012xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18846 Specifications: Certified until 11/2025 Year: 2008 Hours: approx. 11,320 Power: 110 kW Operating weight: approx. 23,200 kg New tracks and sprockets – approx. 200 hours of use New injectors New seal in dipper cylinder Engcon tiltrotator with grapple Grading bucket and digging bucket Dcedpjww Ahxjfx Addjr Central lubrication S70 quick coupler Track width: approx. 60 cm Machine width: approx. 300 cm Extra work lights Radio/CD A/C and heating Undercarriage: see pictures Description:Volvo EC210CL crawler excavator from 2008 offered on behalf of customer.Delivered with valid certification and ready for work.Comes with digging bucket, grading bucket, and Engcon tiltrotator with grapple.Undercarriage recently renewed, new injectors installed, and latest service performed by Volvo.Available for quick delivery. Hours: 11320 Own weight: 2770 Total Weight: 23200 Width: 300 Kw: 110 Model: EC210CL

Condition: excellent (used), mileage: 3,31,195 km, power: 75 kW (101.97 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,010 mm, first registration: 05/2015, CO₂ emissions: 149 g/km, emission class: euro5, color: white, suspension: steel, number of seats: 2, Year of construction: 2015, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, power assisted steering, sliding door, traction control, General information Number of doors: 5 Cab: single Registration number: VN-185-Z Technical information Number of cylinders: 4 Engine capacity: 1.598 cc Transmission Transmission: 5 gears, Manual gearbox Axle configuration Brakes: disc brakes Suspension: leaf suspension Front axle: Max. axle load: 1125 kg; Tyre profile left: 80%; Tyre profile right: 80% Rear axle: Max. axle load: 1230 kg; Tyre profile left: 80%; Tyre profile right: 80% Dcjdpfxswu Hfpo Addsr Measures Dimensions (LxW): 488 x 179 cm Weights Empty weight: 1.461 kg Carrying capacity: 777 kg GVW: 2.238 kg Max. towing weight: 1.500 kg (unbraked 740 kg) Consumption Average fuel consumption: 5,7 l/100km (50 MPG) Urban fuel consumption: 6,6 l/100km (43 MPG) Extra urban fuel consumption: 5,2 l/100km (54 MPG) Condition Technical condition: very good Visual appearance: very good Damages: none Additional information Please contact Moussa or Youssef for more information VIDEO: Very nice and neat Volkswagen Caddy Maxi 1.6 TDI 75 KW Euro 5L Air conditioning / Electrical package 331,000 KM NAP Timing belt replaced at 325,000 km Recently had a major service including replacing injectors Technically and optically in good condition

Condition: excellent (used), functionality: fully functional, Garos injector and tenderizer, type: 128/576 PLC, machine number: 39910026, 400/480 V, 50/60 Hz, 6 bar, 1670 kg, 128 needles, clearance: 550 mm x 310 mm, s/s walking beam, beam width: 550 mm, Very strong machine whit high capacity for both Injection and Tenderizing products. Dcsdpfxoxl Twko Addor

Condition: used, This listing is for a Waters Acquity H-Class UPLC. The unit is in full working condition and is ready for immediate release. Unit includes: TUV Detector Column Manager Dcedpfx Aexv Duuedder Sample Manager Binary Solvent manager Software and computer can be provided at extra cost. Unlock the full potential of your laboratory with the Waters Acquity H-Class UPLC System, a cutting-edge high-performance liquid chromatography (HPLC) solution designed for unparalleled flexibility and efficiency. This advanced system is engineered to deliver exceptional chromatographic separations, making it the ideal choice for pharmaceutical, biotechnology, food and beverage, and environmental applications. Key Features: Quaternary Solvent Blending: Seamlessly combine up to four solvents to optimize method development and enhance analytical workflows. Flow-Through-Needle Injector: Effortlessly transfer existing HPLC methods to UPLC, significantly reducing method development time and boosting throughput. Empower and MassLynx Software: Benefit from advanced data processing capabilities, including peak picking and integration, ensuring precise analysis and reporting. UNIFI Scientific Information System: Streamline data management for metabolomics, proteomics, and glycomics, facilitating comprehensive analysis. Benefits: Experience improved laboratory productivity as you transition to UPLC/UHPLC technology, reducing analysis time while increasing efficiency. Achieve enhanced resolution and sensitivity, allowing for more accurate analysis of complex samples. Simplify method development with advanced tools and software, accelerating the discovery of new methodologies. Applications: Whether you are conducting pharmaceutical research, analysing food safety, or monitoring environmental pollutants, the Waters Acquity H-Class UPLC System delivers high sensitivity and resolution for all your analytical needs. Elevate your chromatography capabilities today and transform your laboratory's performance with this innovative system.

Condition: new, Year of construction: 2025, Starter Packages Powder Coating Starter sets or individually designed packages for starting your own business in surface technology, e.g. for coating alloy wheels: The package includes two sample configurations for entering powder coating or expanding an existing business. Our focus is on customized consulting tailored to the customer’s budget and requirements. Modifications and special requests are standard with us. Proven, robust and low-maintenance technology is at the center of our offer. Set 1: Dodpfjbqk Nbjx Addocr - Powder curing oven, internal dimensions 2,000 x 1,900 x 2,000 mm - 150 mm thick mineral wool wall insulation for energy-efficient and cost-saving operation - 36 kW thermal output for rapid heat-up time - Oil, gas, or electric heating options - 6,000 m³/h recirculating air (2.2 kW) for efficient heat transfer to workpieces - Up to 220°C - Powder coating booth (open spray booth) Powder booth dimensions: - Width: 2,100 mm - Depth: 2,000 mm - Height: 2,200 mm - Fan: 6,000 m³/h, electric motor 3.0 kW for a clean working environment - Filters: 4 units, ø 325x600, cartridge type with interval-controlled self-cleaning - Secondary filtration via pocket filters - Powder coating system Wagner, manual system “Sprint 2 B” - Latest model from premium manufacturer Wagner for optimal coating results (other brands available upon request) - Corona manual gun - PEM-C4 Ergo - EPG-Sprint control unit - Powder feed system with Fluid Crown ST 550/10 - Powder injector PI-F1 - Equipment trolley with vibrating table Set 2: - Powder curing oven, internal dimensions 1,500 x 1,200 x 1,750 mm - 150 mm thick mineral wool wall insulation for energy-efficient and cost-saving operation - 14 kW thermal output for rapid heat-up time - Electric heating - 2,600 m³/h recirculating air (1.1 kW) for efficient heat transfer to workpieces - Up to 220°C - Powder coating booth (open spray booth) Powder booth dimensions: - Width: 1,200 mm - Depth: 1,100 mm - Height: 2,380 mm - Fan: 2,500 m³/h, electric motor 1.1 kW for a clean working environment - Filters: 2 units, ø 325x600, cartridge type with interval-controlled self-cleaning - Secondary filtration via pocket filters - Powder coating system Wagner, manual system “Sprint 2 B” - Latest model from premium manufacturer Wagner for optimal coating results (other brands available upon request) - Corona manual gun - PEM-C4 Ergo - EPG-Sprint control unit - Powder feed system with Fluid Crown ST 550/10 - Powder injector PI-F1 - Equipment trolley with vibrating table

Condition: used, machine/vehicle number: 008342, Max. panel width: 70 mm Max. panel length: 2100 mm No of injectors: 4 Dcsdpfx Ajx A Tc Usddor Lateral horizontal groups: yes

Condition: used, Year of construction: 2007, operating hours: 3,608 h, Drive: Track Serial number: XN7DC1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18436 Specifications: - 2007 model - 3608 hours - 17042 Kg Dodsvgzqrepfx Addocr - 116 kW - Width of Doser 301 cm - Width of doses with shear approx. 380 cm - Belt width: 86 cm - Tilt cylinders - 6 Way Function on grader blade - Good undercarriage (see pictures) - New undercarriage (g tt approx. 300 hours) - Lever steering - Service history - Ready for delivery Description: New Holland Doser with new undercarriage and 6-way function. The undercarriage has run about 300 hours since it was replaced. 2 injectors have been changed. It comes with spare parts when sold. Some repair cost to be expected Ready for delivery Hours: 3608 Own weight: 17042 Total Weight: 17042 Kw: 116 Model: D150B

Condition: used, machine/vehicle number: 007400, Max. panel width: 800 mm Max. panel length: 1250 mm No of injectors: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes Dodpfxjt Hmt Ij Addscr