Used Pine for sale (231)

Condition: excellent (used), We offer for sale the following Gránit-Mill 90 wood pelletizing presses, in the condition shown in the pictures, after the pelletizing plant has ceased operation. The machine is made in Hungary, our company has an excellent relationship with the manufacturer, and we can help you purchase parts. Drive and sticker handling is similar to the old CPM machines. The presses (with pine) are capable of 1.2-1.5 t/h/pc. Price: €29 900/press €49 900/ 2 presses Dodpfx Adjp T Twuodewf Included in the price: pre-tank control cabinet dosing screw permanent magnet conditioner press motors pre-tank 1.1 kW feeder 1.5 kW conditioner 15 kW tablecloth 0.55 kW main engine 90 kW 3 stickers all three are made by La Meccanica barely used It has a 6 x 45 mm hole for pine 2 sets (total of 4) notched collars spare parts screws nuts breaker pin assembly aids Status: Engines and drives intact. Both machines tested. It is recommended to replace the neck bearing of the right machine. Smaller parts (such as the pellet cutter) must be replaced. There is no water supply, the place is prepared. The greasing method is manual, but central greasing can be easily installed. Summary: The machine on the left can be put into production immediately. It requires a minor service on the right side. If necessary, the machine can be tested at a pre-arranged time. Not in production, must be prepared. It is possible to check the mechanical durability and volume density of the produced pellets on site!

Condition: excellent (used), Here we offer you an Iridex laser system OcuLight SLx. Laser IRIDEX Oculight SLx tri-mode 810 nm diode laser. Description: Designed for longevity, with a thermal management system to increase laser conversion efficiency and reliability. Improved user interface with conveniently located, easy-to-understand controls Allows for easy transport between rooms and offices. Tri-mode capability provides three different laser energy delivery modalities: CW pulse, MicroPulse and Long pulse A highly ergonomic user interface, infrared wavelength and a wide range of delivery systems provide a broad spectrum of treatment options Well suited for retinopathy of prematurity and end-stage glaucoma CW pulse mode delivers energy in single or repeat exposures LongPulse mode delivers laser energy over longer periods of time MicroPulse mode delivers laser energy in a series of short duration pulses Allowing for fine control of thermal effects Features: Ophthalmic application area Amplifying medium solid state Ergonomics Benchtop Wavelength 810 nm Treatment laser power: Infrared diode laser 810 nm, 0-3000 mW Target laser power: Red diode laser 650-670 nm, 0 to < 1.0 mW Delivery devices: EndoProbe, TruFocus LIO, portable SLAs, DioPexy, G-Probe, large spot SLAs, LIO and OMAs Exposure durations: CW pulses 10-9000 ms, MicroPulse 0.1-1.0 ms, LongPulse 10s-30 min No external air or water cooling required Weight: 6.4 kg Length: 10 mm Width: 30 mm Height: 30 mm Clinical Applications: The Oculight SLx laser system can be used to perform retinal photocoagulation and glaucoma procedures. While this infrared laser (810 nm) can be used for conventional photocoagulation, it also has some unique treatment capabilities, such as transscleral retinal photocoagulation for retinal tears and detachments, transscleral cyclophotocoagulation for refractory glaucoma, transpupillary thermotherapy photocoagulation for choroidal lesions, and and MicroPulse photocoagulation below the threshold diabetic retinopathy and age-related macular degeneration (AMD). Laser Indirect Ophthalmoscope (LIO) Dwedpfxonp Icdj Addjf The TruFocus Laser Indirect Ophthalmoscope (LIO) is ideal for patients who are best examined and treated in the supine position. It is considered an industry first optical design, that eliminates the need for laser focus adjustment and allows a wide range of working distances. Type: Iridex OcuLight SLx Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Year of construction: 2007, This machine is a Fastbind Elite, manufactured in 2007, with the serial number 12-MA2-19. It is designed to handle a size of 320 x 235 mm and is currently in stock in Germany. The price is available upon request. The machine is in good condition without any damages. It features a flexible binding system capable of diverse binding types and is easy to use. Additionally, it offers dust-free roughening of the book spine and is very compact. Format: 320 x 235 mm Equipment: Good condition without any damage Flexible binding system, diverse binding types Easy to use Dust-free roughening of the book spine. Dedpfew Emurjx Addewf Very compact

Condition: excellent (used), Year of construction: 2008, Ref: 11035 . 2008 Kolbus KM470 EVA/PUR Ratiobinder Line Space saving perfect binding line with front cut device & gauzing. Comprising: (2008) Meccanotecnica ‘Fido’ Book block feeder 20 station ZU804 gatherer for folded sections and single sheets with hand feed station Becker ‘Air Centre’ vacuum & compressed air supply for gatherer ZA 800 downstream reject device & delivery belt & can be used for separate gathering Extended raceway/transfer with vibrate unit Open section for feeding book blocks Ratiobinder KM470 with 21 clamps TFT visualizing monitors with graphic operator guidance. Cutting, micro-notch & brushing units (in-house extraction) EVA & PUR spine gluing system, comprising; Kolbus LH375.B EVA hot-melt pre-melt unit EVA hot-melt roller type spine gluing unit on mobile base EVA hot-melt roller side-gluing device Nordson ‘Durapail’ PUR pre’melter Nordson PUR spine gluing Gauzing unit I.R. heating in radius for increased glue open time Djdpjxyin Iefx Addewf Pile cover feeder with spine pressing & side nipping units Downhill delivery to lay-down device to; Raised TS.E flat conveyor (details on request) system to; XFA660 spiral tower to; TSZ 'Intermediate' escape delivery to; (2007) CERMI XCR 650 Front cutting device Kolbus HD150.B Pile trimmer Kolbus XTP 130 Book stacker (2006) Hugo Beck Shrink wrap tunnel Roller belt delivery. Including spares, tools & manuals. N.B. Compressed air supply required (NOT included). Specification: Book size, Max: 383 x 320 mm Max: 460 x 190 mm Min: 105 x 100 mm Book thickness : 3 -- 60 mm Mechanical speed, Max: 6,000 cycles/hr.

Year of construction: 2023, condition: used, Case maker Kolbus DA 370 Year: 2023 New generation of casemaker for faster production and shorter make-ready times. Automatic production of book cases, files, display cards, calendar backs or game boards, at rates of up to 65 cycles/min. Maximum production and process reliability in the manufacture of book cases. The DA 370 casemaker is a versatile machine for a wide range of applications. The machine with its non-stop case feeder is engineered to be ergonomic and extremely operator-friendly so that it can be easily operated by one person. Configuration: - Copilot system with touchscreen - sectional touch panel for direct operation - large display for showing the speed and malfunction messages - board prestacking conveyor to automatically reload the magazines (stream cover and stack feeder) - counter-stacker delivery with roller conveyor delivery incl. table - cloth feeder for non-stop operation with stack magazine - missing product check during separation of cloth and cardboard - cloth cylinder with grippers and interchangeable plates for rubber pads (5 plates 500 mm wide and 5 plates 720 mm wide, incl. 10 rubber pads) - cardboard centre strip magazine - device used to prepare centre strip roll - centre strip waste chopper - centre strip rub-down unit (head and foot) - rub-down unit used to bond the covering material to cardboards and spine strip without creases - extendable gluing station for processing hot glue with glue preparation in the premelter, heated glue roller and scraper roller - viscosity control unit for an automatic supply of water via a water container with a pump - device for padded cases - function used to request individual cases for monitoring purposes on the operating side - servo-controlled drive technology based on Siemens technology Special equipment: - device for producing quarter-bound cases in two operating steps - device for small format - device for large format - Remote Service Gateway Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 205 x 670 mm - Joint width: 4 - 15 mm - Spine width: 14 - 120 mm - Turn in width open: up to 19 mm - Cloth width: 223 - 708 mm - Cloth height: 158 - 428 mm - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm Dedpfx Adjv N Ep Djdswf - Board height: 140 - 390 mm - Board centre strip thickness: 1 - 4 mm - Board centre strip width: 6 - 90 mm - Centre strip roll thickness: 0,3 - 0,6 mm - Centre strip roll width: 6 - 90 mm - Lining width: 195 - 670 mm - Lining height: 130 - 390 mm

Condition: reconditioned (used), 📄 Typical Specification – SBM Alpine Impact Crushers Feature / Parameter Example Value / Information Manufacturer / Model SBM Alpine Impact Crusher, e.g. Type 10/6/4 EXP Application Area Hard rock, gravel, natural stone, recycling materials (depending on model) Djdexzk U Eopfx Addowf Feed Opening / Feed Size e.g. 350 × 620 mm for Type 10/6/4 EXP For another version: Feed opening 1150 × 450 mm (HSB 125/112 4F) Rotor Size (Rotor Dimension) e.g. 1000 × 600 mm for Type 10/6/4 EXP Throughput / Performance / Capacity approx. 50–100 t/h (depending on material and settings) for Type 10/6/4 EXP Crushing Ratio approx. 1 : 20–50 (depending on feed material and settings) for Type 10/6/4 EXP Motor Power / Power Requirement e.g. 75–110 kW for Type 10/6/4 EXP Feed / Raw Material Size (max. / typical) Highly variable – depends on feed opening and material. (e.g. HSB 125/112 4F for hard rock) Suitable Materials Natural stone, hard rock, gravel, mineral raw materials, depending on version also recycling materials.

Condition: used, empty load weight: 8,591 kg, axle configuration: 3 axles, first registration: 02/2023, suspension: air, Year of construction: 2023, Equipment: ABS, Tara: 8591kg, Suspensión neumática, Barra antiempotramiento, Sistema de frenado electrónico EBS, Enchufe de conexión 1x15 y 2x7 pines, Anti-spray, Pueden encontrar todos nuestros vehículos disponibles en nuestra página . ¿Necesitan financiación?. En la mayoría de los países europeos ofrecemos soluciones de financiación a medida, full service y servicios telemáticos. Estaremos encantados de poder atenderlos. Dodpfx Adjxucbqsdewf

Condition: excellent (used), Year of construction: 2014, Fully automatic, four-clamp perfect binder HORIZON BQ-470 PUR This versatile perfect binder is ideal for short and medium runs, as well as single-copy production. With intuitive operation and flexible application options, the Horizon BQ-470 is the perfect choice for your bindery. Key features: - Intuitive operation via a 10.4-inch color touchscreen enables high-quality binding production, even by less experienced operators - Advanced rotary feeding system with vacuum support provides faster production and handles a wide range of covers without leaving marks - Automatically adjustable creasing position (4 lines) ensures professional binding with a sharp, square spine Specification: - Maximum book block size: 320 x 320 mm, minimum: 145 x 105 mm Dodpfx Asxv Ai Rsddswf - Book thickness: from 1 to 65 mm - Cover size: max. 320 x 660 mm, min. 135 x 225 mm - Cover weight: 81.4–302.4 g/m² (offset paper), 104.7–348.9 g/m² (coated paper) - Output: up to 1,000 cycles/h (PUR) The machine has undergone a complete overhaul and is ready for installation.

Condition: refurbished (used), functionality: fully functional, Foldnak Compact with landscape format and extended delivery table. A flawless Ernst Nagel / Hohner Foldnak Compact is being offered. This model can be quickly converted to landscape format with just a few simple adjustments. Paper sizes from 105 mm x 210 mm up to 325 mm x 604 mm can be processed without any issues. The Foldnak Compact combines booklet making and front trimming in one machine. It accommodates a wide range of formats with short setup times, making it ideal for small, medium, and frequently changing paper sizes in both digital and offset printing environments. The Foldnak Compact features a built-in trimmer that presses the booklet spine before trimming. Its patented stapling and folding mechanism ensures precise staple positioning every time. Additionally, the Foldnak Compact comes standard with a side and front jogger to ensure all pages are perfectly aligned before stapling and folding. A particular advantage for digital print shops: the Foldnak Compact operates independently of any printing press, making it the perfect offline addition. It is an ideal solution for printers requiring speed and flexibility. Specifications: - Maximum thickness: 25 sheets of 80gsm (100 printed pages) - Sheet size min / max: 105 x 210 mm – 325 x 450 mm - Landscape: up to 325 x 604 mm - Staple heads: 2 as standard, up to 4 maximum Dodpoxy Impjfx Addswf - Both flat and loop staples possible - Staple types: 26/6, 26/8 and 24/6 Ri - Speed: Up to 2,000 booklets per hour - Dimensions: 86 x 103 x 71 cm (without delivery table) - Weight: 240 kg / 230 Volt. Test run possible / Shipping possible / Collection possible.

Condition: excellent (used), Year of construction: 2012, Ref:11025 . 2012 Kolbus DA-270 Casemaker For high-speed production of hard book covers, Lever Arch files and games boards. Comprising: ‘Co-pilot’ system with touch screen for automatic size setting, menu guided make-ready and fault indication. Twin board magazine feeders - manual loading Central soft spine feeder with double reel holder for auto-splice and cutter for waste Magazine feeder of pre-cut cloth with miss control Mobile hot-melt gluing unit Heated glue application roller with scraper roller Cloth cylinder with grippers & exchangeable plates for rubber pad Counter shingle delivery with roller conveyor External glue application adjustment Glue viscosity device for automatic water supply control Pressing roller for crease-free cover to board application Single case request for operator set-up Variable DC drive Automatic lubrication Including accessories & manuals. N.B. Compressed air and water supplies to client’s account. Accessories: 2017 Kolbus ECK 100 Corner cutter Specification: Size of opened case, Max: 670 x 390 mm Min : 205 x 140 mm Centre strip width : 6 - 90 mm, thickness 1 – 4 mm Joint width : 4 - 15 mm Dwsdpfx Asxx Uyyoddof Turn-in width, closed : 8 – 15 mm Output, variable : up to 65 cycles/min Floor space : L: 6700 x W: 3000 x H: 2,200 mm Electrical loading : 15 kW (3ph, 400V, 50 Hz) Air requirement : 33 Nm3/h 6 bar.

Condition: used, Year of construction: 1995, Perfect binding line Wohlenberg Master 6501 Year: 1995 Consisting of Gathering machine Wohlenberg Sprinter 7010 Description: - Hand feeding station - Number of gathering stations: 16 - Optical sheet control: WST (total 4 of 24) - Excluding pump(s) - Machine was connected to a centralised air system - Set up element - Transfer into the binder Perfect binder Wohlenberg Master 6501 Dsdpfxott Ug Is Addjwf Description: - Number of clamps: 18 - Milling and roughening station - Dust extraction system - Hotmelt spine glue unit with integrated pre-melter - Hotmelt side glue unit with integrated pre-melter - Gauzing station - Rotary cover feeder - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Transport system vertical, length (approx): 30 mtr - Escape delivery Description modified on 14-04-25

Condition: ready for operation (used), Year of construction: 1993, Machine number 135 Built in 1993 Size max 510 x 290 x 65 mm min 125 x 100 x 3 mm Book block thickness max 65 mm min 3 mm Speed max 10.000 c/h Equipment: • 24 stations gather • book bloc feeder • endsheet tipping unit • 32 Clamps • milling and roughening station • hotmelt spine glue station • hotmelt side glue station • cold spine glue station • Kolbus HL Premelter • Nordson Premelter • Nordson Premelter • Slauterback Premelter • stream Cover Feeder • 2 pressing stations • laydown delivery • Cooling Tower • Kolbus Transport Conveyor w/ All Associated Conveyors • Controls • Large Assortment of Spare Parts Dodpoxykdqjfx Addowf

Condition: used, functionality: fully functional, Biomechanical exoskeleton for relieving the lower back! Original new price: EUR 5,900 TECHNICAL DETAILS Load reduction of the lumbar spine: up to 56–75% Lower back support: up to 15 kg Donning time: under 20 seconds MACHINE DETAILS Weight: < 3 kg Dodpfx Ajxtaanjddewf FEATURES One size with individually adjustable support levels

Condition: good (used), Year of construction: 2002, Heidelberg Stitchmaster ST 300 | 2002 Used Saddle Stitching Machine Heidelberg Stitchmaster ST 300 is a reliable and efficient saddle stitching line designed for commercial printshops and finishing houses. This 2002 model is in good working condition, currently installed, and available for immediate sale. Brand: Heidelberg Model: Stitchmaster ST 300 Year: 2002 Category: Saddle Stitching Machine Condition: In production – fully operational Origin: Germany Availability: Immediately Technical Specifications Maximum Sheet Size: 46 × 33 cm (18 × 12 inch) Formats – Face × Spine Untrimmed: Max. 320 × 480 mm Min. 92 × 128 mm Trimmed: Max. 305 × 474 mm Min. 89 × 120 mm Product Thickness: Up to 12 mm Dwedpfx Adsxyqh Aedjf Speed: Maximum: 13,000 cycles/hour Minimum: 1,500 cycles/hour Stitching Heads: Up to 6 standard Gripper Opening: Low folio lip: min. 8 mm High folio lip: min. 6 mm Opening System: Vacuum opening Made in: Germany Machine Configuration This ST 300 line includes: 6 feeding stations UFA 300.1 cover feeder RIMA stacker for smooth delivery Vacuum opening system Complete and ready-to-run configuration Condition & Inspection Machine is in good working order Currently installed and can be tested Well-maintained equipment Ideal for commercial printers and finishing operations Why Choose the Stitchmaster ST 300? High production speed up to 13,000 cycles/hour Reliable German engineering Versatile format range for various booklet sizes Strong performance for short and long runs Easy integration into existing finishing lines Availability Ready for quick sale and immediate delivery.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: dd2d22d, ELECTRONIC CONTROL SYSTEM FOR X-RAY CUTTING LINE Wood type: Pine, Spruce Scanner functionality Acquisition of measurement signals from the multi-sensor scanner. Processing (D) of the 3D map from the laser triangulation signal. Dwodsxvxrnepfx Addsf Processing (S) of the fiber deviation map from the laser scatter signal. Processing (R) of the roughness map from the laser triangulation signal. Processing (C) of the normalized color map from the high-resolution RGB signal. Integration of 3D data, fiber deviation, roughness profile, and color map information into a coherent multidimensional image.

Condition: excellent (used), Year of construction: 2009, Ref:10891 . 2009 ODM ‘Sticker’ Casing-in Machine + ‘Smasher’ Press. For casing-in & pressing a variety of thin to thick books into flexible or hard cases. Djdpju Tky Refx Addswf ODM ‘Sticker’ Features:- • Easy to use control panel. • Very short set-up and strip down times. • Self-adjusting machine requires no make-ready for different case sizes. • Integral twin glue tanks, easily removed for quick cleaning. • Vacuum cover guide for accurate placement of the spine*. Hand feed of book block Vertical wing action Twin PVA cold glue tanks/application rollers Manual feed of case* ODM ‘Smasher’ Self-adjusting hydraulic pressing & building-in machine. Features:- • Easy to use control panel. • Foot pedal operated pre-set to locate the joint area of the book. • Dual hand button operation for operator safety. • 10 tons of pressure for highly compressed books. • Adjustable dwell timing for pressure duration and heating forming. • Thermostatic control of heated joint forming irons. Specification: Sizes, Max: 280 x 355 mm Min: 100 x 100 mm Book thickness : 1 - 100 mm Mechanical speed, Max: 100 - 400 books/hr. (series production) Max: 100 - 200 books/hr. (one-off production)

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Dsdpfxsxuad As Addowf Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: used, Year of construction: 2005, TB sprint 304 QSM stitch-fold-trim unit Format open max.: 35 x 50 cm Format open min.: 6.5 x 15.5 cm smallest booklet: 6.5 cm spine length x 4 cm with head-foot trim: 10.5 cm spine length x 4 cm Dedjh I Ahxspfx Addswf largest brochure: 35 cm spine length x 25 cm with head-foot trimming: 34.6 cm spine length x 4 cm Up to 3100 cycles/h, depending on format and paper Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorised format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper 4 stiching heads

Condition: used, Year of construction: 2008, functionality: fully functional, Handfeed station – 14 x feeder – book Block feeder - 12 Clamp Binding Unit - Milling & Spine Preparation Units - Hot Melt Side Glue with pre-melter – Hot Melt Spine Glue with pre-melter - Drum Cover Feeder - Nipping & Pressing Station - Exit Raceway & Laydown Delivery - Conveyor System with Reject Gate - Muller Martini Esprit Trimmer Binding thickness 2 mm - 50 mm Dwodpfjxtau Eex Addef Cover size max. 640 mm Cover size min. 202 mm Max. speed 900 to 4,000 cycles/hr. Max. book size 380x320 mm Min. book size 120x100 mm

Condition: good (used), Year of construction: 1999, STAHL Casemaker DM 300- II Model: STAHL Casemaker DM 300-2 Machine No.: 300-0007 Year: 1999 Status: In stock – Available immediately Max. Band Size: 60 × 41 cm (23 × 16 inch) Speed: Up to 40 cycles/min Main Machine – DM 300-2 Casemaker Hardcover casemaker equipped with two gluing stations and complete control sections. Configuration Basic main unit Feeder and cutting device for flexible spine from roll Magazine for stiff spine Board feeder First control station Cloth feeder with gluing unit Second control station Second cloth feeder with gluing unit Third control station First turning-in unit (top and bottom) Second turning-in device Delivery section Operating and supply unit Sizes Min. open cover: 120 × 160 mm Dwodpfsxyqg Sox Addof Max. open cover: 405 × 600 mm Documentation Included Operating manual Spare part book Electrical diagrams Full technical documentation Additional Machines & Modules Included (German Bookbinding Line) Below is the structured list exactly as per your data: SU – Schutzumschlagmaschine Speed: 40/min – 70/min Size: 370 × 270 × 60 Book block: 125 × 105 × 10 Capacity: 4 Dimensions: 5.50 × 2.1 m / 6.30 × 2.5 m EMP-FE – Bucheinhängeautomat & Buchformpresse Speed: 70/min Size: 335 × 265 × 65 Book block: 125 × 100 × 6 Capacity: 21.6 Dimensions: 10.50 × 2.34 m / 34'5" × 9' DS – Buchstapler Speed: 40/min Size: 375 × 275 × 80 Book block: 125 × 100 × 6 Capacity: 1.5 Dimensions: 3.75 × 0.8 m / 12'4" × 2'3" AA / AB – Buchblockanleger Speed: 70/min + 40/min Sizes: 380 × 280 × 70 370 × 290 × 75 Book block: 100 × 100 × 6 125 × 100 × 10 Capacity: 0.5 Dimensions: 0.85 × 0.7 m / 1.7 × 1.7 m System-Straße Speed: 40/min Size: 365 × 270 × 70 Book block: 125 × 100 × 6 Compact-Straße Speed: 40/min Size: 363 × 270 × 70 Book block: 125 × 100 × 6 Hochleistungs-Straße Speed: 70/min Size: 335 × 265 × 65 Book block: 125 × 100 × 6 Spezialmaschinen / Aggregate EMP-FES Spezial-Hochleistungs-Straße Speed: 100/min Size: 305 × 230 × 30 Book block: 125 × 100 × 3 Capacity: 21 Dimensions: 10.5 × 3.00 m / 34'6" × 9'1" SF – Schnittfärbemaschine Speed: 40/min Size: 370 × 270 × 80 Book block: 125 × 100 × 6 Capacity: 10.5 Dimensions: 3.75 × 0.90 m / 12'4" × 2'11" EA – Bucheinhängeaggregat Speed: bis 15/min Size: 520 × 420 × 120 Book block: 125 × 100 × 6 Capacity: 0.4 Dimensions: 2.80 × 0.90 m / 9'2" × 2'11" KE – Kleiner Bucheinhängeautomat Speed: 35/min Size: 200 × 130 × 28 Book block: 65 × 65 × 4 Capacity: 2.4 Dimensions: 2.70 × 2.00 m / 8'10" × 6'7" Complete Line Summary This package offers a fully equipped hardcover book Ideal for industrial book production, publishing houses, and bindery operations seeking a complete, ready-to-run line.

Year of construction: 2013, condition: ready for operation (used), The Tona Rapid XL processes larger fruits and vegetables with a maximum diameter of 130 mm and a maximum height of 220 mm. It can be used to efficiently cut products such as pineapples, beets, oranges or eggplants/aubergines into slices, segments or cubes. The cutting machine is particularly suitable for fruit and vegetables that must remain in a certain alignment during the cutting process in order to ensure perfect cutting results.   Dsdpfowdpmujx Addswf

Condition: excellent (used), Computer control capability 2xDSC - 10/60i DBMi Saddle System Automatic collection, stitching, and folding of brochures iSaddle System – precise spine-line stitching Djdjxtxgyepfx Addowf Compatible with various types of feeders (Duplo DSC, DBM, etc.) High accuracy and finishing quality Quick format changeover Ideal for the production of brochures, catalogues, and magazines in digital or offset printing

Condition: used, Year of construction: 1995, Perfect binder Wohlenberg Master 6501 Age: 1995 Description: - Number of clamps: 18 - Milling and roughening station - Dust extraction system Dwsdpfx Asxt Evheddsf - Hotmelt spine glue unit with integrated pre-melter - Hotmelt side glue unit with integrated pre-melter - Gauzing station - Rotary cover feeder - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Max. mechanical speed: up to 6.500 cycles/h Maximum size range: 430 x 320 x 62 mm Minimum size range: 140 x 105 x 2 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2019, operating hours: 2,900 h, Operating hours: 2,900, First registration: 11/07/2019_____Year of manufacture: 2019. Sweeper CityCat 2020 XL Euro 6 C, equipped as per standard 2020 SL configuration: with VM engine, Euro 6 certified, standard version with 2 side brushes, integrated diesel particulate filter, SCR catalytic converter, AdBlue. Additionally equipped with: 3rd front disc brush, Ø 800 mm, pivoting left and right with hydraulic tilt adjustment, with hydraulic block, fixed hydraulic lines. Operated via joystick on armrest, which controls the movements of the front and side brushes as well as reverse driving. Paintwork: RAL 2011 orange. Sweeping system/container: KAC08 suction hose, 4.8 m long (incl. 800 mm suction tube), Ø 120 mm, with Storz couplings, holder frame, and two rear lights; KAC23 side adjustment of both side brushes with single lift and rotational direction control, combined; KAC24 hydraulic side brush pressure relief on both brushes; KAC26 shut-off flap in the suction hose with Storz coupling at the debris container. Cabin: KCC01 fully integrated, CFC-free air conditioning; KCC11 right-side brush mirror; KCC17 right-side wide-angle mirror; KCC22 Grammer MSG90.3 C driver’s seat without seatbelt; KCC26 3-point safety belt for co-driver seat; KCC27 headrest for co-driver seat; KCC28 heated exterior mirrors; KCC29 left wide-angle mirror; KCC33 combined rear-view and suction mouth camera; KCC64 Radio DAB+ with CD (manufacturer Alpine, type CDE-205DAB), mp3, front aux, USB, Bluetooth, microphone. Electrics: KE007 reverse warning buzzer; KE018 LED lighting for 3rd front brush; KE020 lighting for left side brush; KE037 LED rotating beacon with flexible mount on cabin, folds away if obstructed; KE039 LED rotating beacon with flexible mount at rear on KGB, folds away if obstructed. Water: KW003 high-pressure water system with lance and 8 m hose for spraying up to 120 bar, connected to fresh water tank and installed at articulated joint. Dodpjxwtpkefx Addswf Miscellaneous: KX023 tow hitch, mounted at the rear; KX049 cabin comfort suspension with combined spring-damper package for increased driving comfort due to additional cabin mounting; KX061 lashing eyes on chassis: 2 at front, 2 at rear; CC20_K_002b protective seat cover for Grammer driver’s seat; CC20_K_008 cruise control retrofit kit; CC20_E_002c LED work light for right side brush; CC20_E_002c LED work light for left side brush; CC20_KA_001 Weber brush with mixed bristles, standard – orange disk for vehicle in RAL 2011; CC20_WA_013 hose reel for HD high-pressure lance; CC20_CH_009b central lubrication strip. Additional options: used, reinforced combination arm KAC27. Machine: 1 Sweeper, CityCat 2020, Location: 54595 Prüm.

Condition: used, Year of construction: 2005, Perfect binding line Kolbus ZU 841.A - KM 473 Year: 2005 Consisting of Gathering machine Kolbus ZU 841.A Year: 2005 Description: - Colour monitor with touch screen - Number of gathering stations: 20 (15 x incl Signalynx bar code reader),( 4 x Optoelectronic signature recognation) - Air center: Variair - Set up element - Transfer into the binder Perfect binder Kolbus KM 473 Year: 2005 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 27 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 370 - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson Durapail - Base for side glue system - Hotmelt side glue unit, interchangeable - Gauzing station - Stream cover feeder: SAL 411.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down delivery Transport system Kolbus Description: - Escape delivery Conveyor tower: 2x Dwsdpsxd Dm Hjfx Addof Max. mechanical speed: 8.000 cycles/h Maximum size range: 383 x 320 x 70 mm Maximum size range: 460 x 190 x 70 mm Minimum size range: 105 x 100 x 3 mm