Used Pipe Drawing Machine for sale (66,356)

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Rema Type: TP80 Machine Type: Tube grinding machine Electrical Data Operating Voltage: 400 V Connected Load: 2.5 kW Rated Current: 6 A Grinding Data Grinding Diameter: approx. 80 mm MACHINE DETAILS Dimensions Length: 830 mm Width: 700 mm Height: 1,500 mm Weight Dkjdpe Aduq Tsfx Aizjw Machine Weight: 200 kg

Year of construction: 2008, condition: good (used), Manufacturer: WORTELBOER HOLLAND Type: PBM 24 Year of construction: 2008 Clamping area 215 - 620 mm Rotation area 170 - 620 mm Stroke 290 mm Max. wall thicknesses 1 cycle 40 mm Rotation speed 25, 38, 50 min TRB Roller conveyor 7000 mm with V Type Construction in height adjustable Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) length 3200 mm width 2200 mm height 1700 mm Dedpfx Aisrr Ungjzokw weight 12000 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: M38L/7658, Offer Number: M38L/7658 Machinetype: pre-drawing machine Make: RMG Type: 56-0776-85 Constr. year: 1986 Dedpfx Aewi S R Toizskw diameter range: 8 mm drawing speed: 19 m/min mild steel: 9,5 mm high tensile: 8 mm capstan diameter: 600 mm drawing power: 1400 kg Location: In our warehouse

Condition: as good as new (ex-display), functionality: fully functional, Tube bending machine TUBEND TB 42 incl. 3 sets of tools -CE marking -Bending range 42x3mm -Hydraulic drive -Manually adjustable angle switch -Digital display -Adjustable stroke -Emergency stop function -Three sets of tools: 33.7 mm / 26.9 mm / 21.3 mm Dkodpfx Aieznu Sbjzsw -Documentation -400 Volt connection Dimensions: L x W x H 1.1 x 0.7 x 1.5 meters / Weight approx. 500 kg Errors and omissions excepted.

Condition: excellent (used), For wire diameters of 17.2 mm Drawing die diameter (capstan): 1100 mm Drawing speed: 10 m/min Dodj Afumdepfx Aizskw Machine weight: 6000 kg For screw manufacturing/cold forming

Year of construction: 2008, condition: ready for operation (used), A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible. Dkodpfewih Arox Aizow

Condition: used, Year of construction: 1995, tube diameter 45 mm wall strength 2 mm bending radius min. . mm weight of the machine ca. 1,7 t dimensions of the machine ca. 5x0,85x1,5 m sn 1765 Pipe length up to 4100 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Dodpfx Aieyutr Uozskw apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Used and fully functional RMG 89 wire drawing machine: Max. diameter: 14 mm. Capstan diameter: 900 mm. Drawing force: 3,850 kg. Motor: 18.75 kW Dkjdpfx Aozx Rikjizew Speed: 21.25 m/min. Weight: 2,000 kg.

Condition: good (used), functionality: fully functional, total height: 2,350 mm, total width: 1,200 mm, total length: 2,750 mm, overall weight: 3,500 kg, workpiece weight (max.): 1,000 kg, Workpiece diameter: ø25 - 630 mm (min-max) Torch stroke: 1500 mm Djdpfx Aisz H Nzfszokw Chuck through-hole: ø200 mm Cutting speed: 2000 mm/min Max. workpiece weight: 1000 kg PLC Controller: Siemens C7-633 Cutting process: Plasma cutting or oxy-fuel cutting Country of origin: Germany Machine (L×W×H): 275 x 120 x 235 cm Machine weight: ca. 3500 kg

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Make: VEB Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm number of drafts: 8 Dkodpfx Aowi Tidjizow diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe

Year of construction: 1993, condition: reconditioned (used), year - 1993 / 2020 complete reconditioned with new PLC Management tube diameter max. 100 mm wall thicknes - 10 mm pull up length of tube - 6000 /12000 mm Mandrel pipe bending up to 4 mm pipe wall thickness and pipe bending without mandrel from 5.0 - 10 mm pipe wall thickness accuracy of bending angle ± 0,2 ° Djdpfx Aisiau Uuezekw total power requirement - 50 kW weight of the machine ca. 6 t

Condition: good (used), Year of construction: 2019, machine/vehicle number: 250-19, Offer 25283 Technical Specifications: - Saw blade speed, frequency controlled, for very fine cutting - Saw blade diameter: 200 mm Dkodpfsw Nhumjx Aizow - Automatic operation cycle - Pressure stop with SICO counter for setting the glass pressing force - Simulation - Pneumatic connection: 6 bar - Drive: 400 V / 0.8 kW - Required space: approx. W 400 x H 1200 x D 700 mm - Weight: approx. 80 kg - Machine stand

Condition: as good as new (ex-display), Year of construction: 2025, Max Ø 114mm; Straight and bent round tubes; One grinding station; Grinding of straight and bent round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval and elliptical tubes. Dodpfstzkgbsx Aizjkw The ML planetary belt system allows belt grinding without rotating the tube to deliver the best results. The feed system safely feeds the straight tubes into the grinding station for a consistent and productive surface finish. ML100 Working capacity (Ø mm) 3 - 114 No. of stations 1 Sanding belt, dimensions (mm) (2x) 50x940 Sanding belt speed (m/s) 3-22 Feed speed (m/s) 1-5 Sanding belts Motor (kW) 3 Wheel, motor (kW) 1.5 Feed motor (kW) (2x) 0.12 Total power (kW) 5 Power consumption (A) 11 Dust extraction connection (Ø mm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250

Year of construction: 2021, condition: ready for operation (used), A semi-automatic vacuum skin packaging machine (tray sealer) Sealed Air for Darfresh skin packaging is available. Packaging capacity: 15/min, cycle performance: 1.5 cycles/min, film width: 562mm, max. product dimensions X/Y/Z: 670mm/470mm/50mm, tray length range: 135mm-700mm, tray width range: 120mm-520mm, tray height range: 5mm-50mm. Machine dimensions X/Y/Z: approx. 1050mm/1650mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Dedpjxaphbefx Aizokw

Year of construction: 1987, condition: ready for operation (used), An old Schumag Aachen drawing machine without control is available. Drawing force: 100kN, drawing speed: 80m/min, material diameter range: 25mm-43mm. On-site inspection is possible. Dsdpfxev Tctue Aizjkw

Condition: used, Hydraulic Profile Bending Machine, Pipe Bending Machine LANG Type Ondomat 60 Serial No. 2589 Year of manufacture: 1970 Bending capacity max.: Ø 60 x 2 mm Pressing force: 20 tons Counterforce: 7.5 tons Maximum bending angle: 135° Tool stroke: 250 mm Maximum tool width: 125 mm Dksdpsyi Hrwsfx Aizsw External width of tool rocker: 90 mm Motor power: 18 kW Power supply: 380 Volt, 50 Hz - Hydraulic bending process with counterpressure cylinder for wrinkle-free bending - Up to 10 different bending angles in sequence via automatic indexing turret - Two-hand control panel - 1 set of bending dies Ø 30 mm, die width rocker = 78 mm, die width counterholder = 50 mm Required space (L x W x H): 2000 x 750 x 1500 mm Weight: approx. 2 tons Good condition

Condition: good (used), Year of construction: 2000, For wire diameters from 1 to 5.5 mm Drawing drum diameter: 400 mm Drawing speed max. 25 m/min For screw manufacturing/cold forming Dkjdpsy N Df Nofx Aizjw

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Dodpfsr Nfvmsx Aizokw Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: used, Veenstra pipe bending machine. Dkodpfezq Amlsx Aizow Size 25 or 32. In good working condition. Used personally for my own work; no longer needed. Includes various sizes.

Year of construction: 2023, condition: new, Machine equipped with complete formworks (rotating hade, 5 steel rings, outer formwork) for pipe with diameters: Dint=1000mm si Dint=800mm; - The equipment can manufacture unreinforced concrete pipes with connection sockets: Dint=1000mm; Dint=800mm; Dint=600mm; Dint=500mm; Dint=400mm; Dint=300mm; - Maximum height of pipe: 1000mm; minimum height of pipe: 250mm - Vertical translation of the rotating head – electric engine - Variable revolution of the rotating head (frequency converter) - Sizes: 2.0x2.0x4.2 meters - Mass≈2000 kilograms - Power: 16 kW (supply voltage: 380V) Djdpsiy Dl Hefx Aizskw - Average productivity: 1 pipe / 6 minutes - Loading of the machine with concrete: manual; (optional – by conveyor belt) - Manipulating the formwork with the concrete pipe inside: with the forklift; - Recovery of the formwork: immediately. - Recovery of the ring: after 2-3 days, depending on the ambient temperature. - The frequency converter allows adjustment of speed according to the inside diameter of the pipe. - Changing the rotating head is simple and fast. - Rotating heads are lined with interchangeable wear resistant steel sheets. EQUIPMENT REQUIRED: - MX500L Concrete Mixer with aggregate loader: concrete preparation - Conveyor: transport of concrete from the mixer to the formwork. Steel rings for the lower plug - The production surface must be perfectly flat!

Condition: used, Year of construction: 1986, tube diameter 4-20 mm wall strength 2 mm Dksdpfx Aiswbi Hcjzjw bending radius min. 10 mm bending radius max. 75 mm bending speed 35 mm/min pull up length of tube 2000 mm total power requirement 7,5 kW weight of the machine ca. 1,1 t dimensions ca. 3100x1000x1400 mm

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own) Dkodpef Epznofx Aizow

Condition: new, Year of construction: 2026, total width: 750 mm, total length: 2,900 mm, total height: 1,160 mm, warranty duration: 12 months, overall weight: 400 kg, Compact roll forming equipment for producing metal rainwater downpipes This portable roll forming machine is designed for the production of rectangular metal downspouts and rainwater downpipes from pre-painted or coated sheet steel. The machine progressively forms a flat metal strip into a finished rectangular profile suitable for residential, commercial and industrial rainwater drainage systems. The dimensions and geometry of the finished downpipe can be manufactured according to the customer’s technical requirements. The roll tooling is designed for a specific rectangular profile, taking into account the required width, height, corner shape, surface pattern, material thickness and connection type. The machine is suitable for manufacturers of: rectangular metal downspouts; rainwater downpipes; roof drainage systems; gutter and downspout components; roofing accessories; façade and sheet-metal products; custom cold-formed metal profiles. Its compact size and relatively low weight make it suitable for small workshops, roofing companies and production sites where a large stationary roll forming line is not required. Custom profile dimensions The finished profile is produced according to the customer’s drawing, sample or technical specification. The machine is therefore supplied as a custom rectangular downspout roll former, configured for the required finished product. The basic production process is: Decoiler → Roll forming system → Manual saw cutting Main advantages Compact and portable construction Custom tooling for the required downpipe size Production directly from coated sheet steel Suitable for pre-painted and galvanized material Gradual roll forming with controlled material deformation Low installed motor power Dsdpfx Aiezrnxcszekw Simple operation and maintenance Suitable for small-batch and regular production Finished products can be cut to the required length Reduced dependence on purchased ready-made downpipes Suitable for workshops with limited production space Material The standard configuration is designed for coated sheet steel with a thickness of approximately 0.4–0.5 mm. Depending on the agreed configuration, the machine may process: pre-painted steel; galvanized steel; polymer-coated sheet steel; other thin sheet-metal materials after technical approval. The exact material grade, tensile strength, thickness and coating must be specified before the roll tooling is designed. Technical specifications: Machine type Portable roll forming machine Finished product Rectangular metal downspout / downpipe Profile dimensions According to customer specification Material Coated sheet steel Material thickness Approx. 0.4–0.5 mm Forming speed Approx. 3–8 m/min Main motor power 3 kW Transmission Gear and sprocket drive Auxiliary forming elements Polyurethane wheels Cutting system Manual circular saw Machine dimensions Approx. 2860 × 730 × 1160 mm Machine weight Approx. 400 kg Electrical supply 380 V, 50 Hz, 3-phase* Compact machine design This makes it suitable for: roofing contractors; rainwater system manufacturers; sheet-metal workshops; gutter and downpipe producers; building component manufacturers; small and medium-sized production facilities; companies producing custom roofing accessories. Scope of supply A custom set of roll forming tools will then be designed for the required product.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Max. bending diameter: Ø 76 mm Max. pipe wall thickness: 3.0 mm Max. bending length: 6000 mm Min. bending angle: 0.1° Max. bending angle: 190° Max. bending radius: 260 mm Operating speed Rotation speed: 200°/second Bending speed: 30°/second Feed speed: max. 1000 mm/second Tolerances: Rotation (°): ±0.1° Bending (°): ±0.1° Feed (°): ±0.1° Hydraulic system: Hydraulic motor power: 7.5 kW Max. hydraulic pressure: 180 bar Hydraulic oil: 120 liters Rated power: 44 kW Voltage: 400 V AC Dimensions L x W x H: 8900 x 1200 x 1850 mm Weight: 4850 kg Description: Materials: Steel | Stainless steel | Aluminum | Brass | Copper and other flexible materials for simple to complex shapes Display: Portable 15-inch color touchscreen monitor Control panel: Servo and hydraulic motion control, plus selectable servo axis speed Djdpfxsyr N Erj Aizokw Foot pedal User-friendly AKYAPAK control software Hydraulic system: Bosch, Parker Operating modes: Manual, semi-automatic, and fully automatic Programming: Y-B-C or X-Y-Z mode Cooling system: Hydraulic oil cooler Pipe clamp: Hydraulic Industrial PC: Pentium processor, 256 MB RAM, hard drive, and floppy disk drive Lubrication system: Automatic Control: PLC-based Rotary axis: Servo-controlled Bending system: Hydraulic Auxiliary axes: Hydraulic Forward and reverse movement: Manual Pipe length calculation: Automatic, according to program Workpiece display: 3D 360° graphic display

Condition: used, Year of construction: 2006, tube 4500 mm 76,1 x 4,0 mm 200 mm total power requirement 3,5 kW Dodpfx Aj Ahzihsizjkw machine weight ab. 1.500 kg