Used Plan Lathe for sale (9,283)

Condition: not inspected (used), Year of construction: 2015, functionality: unexamined, machine/vehicle number: 150436, turning length: 1,000 mm, total length: 3,200 mm, total width: 1,200 mm, total height: 1,900 mm, overall weight: 3,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 828 D, PINACHO ST-225 Lathe Bsdj Afup Sepfx Agxoww - Center height above bed: approx. 260 mm - Swing over bed: approx. 520 mm - Center height above carriage: 180 mm - Swing over carriage: approx. 360 mm The machine is equipped with a tailstock and an 8-position tool turret, tool holder: VDI 30, including a 3-jaw chuck, diameter: 200 mm FCA D-94227 Zwiesel - loaded onto a truck.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1492, turning length: 620 mm, turning diameter: 240 mm, spindle speed (max.): 4,200 rpm, controller model: Okuma OSP5000L, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Upper turret: 10 stations Lower turret: 8 stations Chuck: 250 mm / 10" Spindle nose: A2-6 Spindle bore: 62–80 mm Max. turning diameter: 240 mm Swinging diameter over bed: 450 mm Swinging diameter over cross slide: 300 mm Max. turning length: 600–620 mm Spindle speed: up to 4200 rpm Main motor: 15–20 kW Bwodo Afxvvepfx Agxew Rapid traverse X/U: approx. 12 m/min Rapid traverse Z/W: approx. 15 m/min MACHINE DETAILS Control: Okuma OSP5000L Voltage: 380 V Phases: 3 Frequency: 50 Hz Max. power consumption: 49 kVA Total current: 82 A Max. motor current: 106 A Short-circuit strength: 10 kA Weight: approx. 5,500 kg Dimensions: approx. 2940 × 1730 × 1830 mm EQUIPMENT Documentation/Manual

Condition: good (used), Year of construction: 2004, For sale are 2 Scherer VDZ 80 DS units with the following technical specifications: Circumferential diameter: 120 mm Z-axis (vertical): 265 mm X-axis (horizontal): 280 mm Diameter at the front bearing: 85 mm Diameter at the rear bearing: 75 mm 2 x A4 spindle Spindle unit drive, rated power: 16.8 kW Rated torque: 100 Nm Speed: 1000 - 7000 rpm Travel speed, Z-axis: max. 30 m/min Travel speed, X-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Please note! The unit was part of a complete production line. However, it has its own individual program. Price is per unit! Upon request, transport and loading can be arranged throughout Europe for an additional charge. Prices exclude VAT. Inspection is possible by appointment. Please contact us, our team will be happy to assist you. Machine sales / purchases WE BUY / SELL PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Do you need a high-quality but affordable machine for your production? Or do you want to sell your machine? Bwjdpfxs Ahqyij Agxow For further information or to contact us, please use the contact form.

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 9611-1806, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period of November 16th to November 26th. TECHNICAL DETAILS General Information Machine number: 9611-1806 Control system: Siemens SINUMERIK Electrical Data Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Working Area Maximum turning height: 1,240 mm Maximum turning length: 2,000 mm Spindle bore: 130 mm Chuck diameter: max. 130 mm Torque: max. 460 Nm Cross slide travel: 200 mm Tool Holder Tool holder: VDI 40 Tailstock Bjdpsz Uql Aefx Agxeww Taper: MK 5 Tailstock diameter: 90 mm Automatic tailstock quill travel: max. 150 mm Transport Transport: possible on a standard truck EQUIPMENT Workshop cabinet Large quantity of VDI 40 tool holders Coolant system Loading system

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, turning length: 250 mm, turning diameter: 150 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 150 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 285 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 25 m/min, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle motor power: 7.5 kW Spindle bore: 45 mm Spindle nose: A2-5 Spindle speed: min. 60 rpm Spindle speed: max. 6,000 rpm Turning diameter: 150 mm Turning length: 250 mm Chuck outer diameter: 203 mm Swinging diameter over cross slide: 150 mm Swinging diameter over compound slide: 250 mm X-axis travel: 150 mm Y-axis travel: 60 mm Z-axis travel: 285 mm Rapid traverse Z-axis: 25 m/min Rapid traverse X-axis: 20 m/min MACHINE DETAILS Input current type: Three-phase Dimensions and weight Dimensions (L x W x H): approx. 2,000 x 1,700 x 2,000 mm Machine weight: approx. 4,000 kg Bwedpfx Ao Afxtzogxsw EQUIPMENT Documentation/Manual

Condition: good (used), Year of construction: 1965, Revolver lathe, manufactured by HESTIKA, type HR32, year of manufacture approximately 1965. Maximum spindle bore: 32 mm, with tool turret, collet chuck. Spindle speeds: 200-3200 rpm, with coolant system. Machine documentation available. Collet chuck, size 164E. Bwedsvgbphopfx Agxew In good condition, ready for immediate use.

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 01360000541, turning length: 600 mm, turning diameter: 320 mm, spindle bore: 87 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,300 mm, total length: 4,000 mm, total width: 2,000 mm, quill diameter: 120 mm, quill stroke: 150 mm, overall weight: 5,000 kg, controller manufacturer: HEIDENHAIN, controller model: CNC PILOT 4290, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, nominal power (apparent): 44 kVA, tailstock quill stroke: 580 mm, operating hours of spindle: 22,794 h, GILDEMEISTER CTX 400 C CNC turning machine - Swing diameter: 505 mm - Swing diameter over X-axis: 365 mm - Bar capacity: max. 65/75 mm - Spindle diameter in the front bearing: 130 mm - Chuck diameter: 200/250 mm - Drive power: 21 kW - incl. C-axis - Speed: 200 rpm - Positioning accuracy: 0.04° - Ball screw X/Z: 32 x 10 mm - Feed force X/Z: 4/6 kN - incl. 12-position tool changer - Number of driven tool stations: all 12 - Shank diameter: VDI 30 - Tool disk, axial tool mounting: pitch diameter: 340 mm - incl. tailstock, tailstock travel: 580 mm - Center height: MK 4 - incl. additional driven VDI 30 tool holders – compatible with the machine - with chip conveyor and documentation Bsdpj Afutdofx Agxsww The machine is equipped with a tailstock, a 3-jaw chuck, diameter: 200 mm, and a 12-position tool turret, VDI 30. FCA D-94227 Zwiesel - loaded onto a truck.

Condition: good (used), Year of construction: 2004, functionality: fully functional, overall weight: 2,300 kg, type of input current: three-phase, Citizen L20, year of manufacture: 2004 + FMB 3-26, for sale. Machine type: CNC turning center + magazine loader FMB CITIZEN Type: L5 20-VIII Year of manufacture: 2004 Control: CNC Country of origin: Japan Incoterms: EXW Delivery time: Immediate Description: Text Value Unit CNC turning center Citizen L5 20-VIII with magazine loader FMB 3-26 Collet size F25 (145E) Guide bushing (Neukomm) T223 (22.001) 3-position block with driven tools, can be swiveled by 90° (radially or tangentially) Accessories: Documentation, standard tooling Technical details / Accessories / Additional information: Manufacturer: Bwsdpo Ahg Saofx Agxsw Turning diameter over bed 20 mm Spindle bore 24 mm Turning length 200 mm Spindle speed 20-10000 rpm C-axis 0.001 ° Parting station 20 mm Turning length 80/600 mm Spindle speed 200-8000 rpm C-axis 0.001

Condition: ready for operation (used), Year of construction: 1973, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Traub Type: M125 Year of Manufacture: 1973 Bwjdpfxo Ad Ik Ho Agxsw Machine Type: Turning Automaton MACHINE DETAILS Electrical Data Operating Voltage: 83 V Frequency: 50 Hz Dimensions and Weight Length: 1,500 mm Width: 1,000 mm Height: 1,600 mm Weight: 800 kg

Condition: good (used), Year of construction: 1975, Revolver turret lathe, manufacturer: HESTIKA, type: HR42, year of manufacture: approx. 1975. Spindle bore max: 42 mm, with revolver head and Multifix tool holder, type: B. Spindle speeds: 88 - 2800 rpm, collet chuck, coolant system. Machine documentation available. Collet chuck for 173E collets. Bsdpfx Aovgbqfegxjww Machine in good condition.

Condition: good (used), Year of construction: 2008, For sale: 1 Scherer VDZ 80 DS unit with the following technical specifications: Swing diameter: 120 mm Z-axis (vertical): 265 mm X-axis (horizontal): 280 mm Diameter at the front bearing: 85 mm Diameter at the rear bearing: 75 mm 2 x A4 spindle Drive spindle unit rated power: 16.8 kW Rated torque: 100 Nm Speed: 1000 - 7000 rpm Travel speed, Z-axis: max. 30 m/min Travel speed, X-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Note! This unit was part of a complete production line. A separate program is available. Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices exclude VAT. Bwedpo Ahqymsfx Agxow Inspection possible by appointment. Contact us, our team will be happy to assist you. Machine Buying/Selling BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Do you need a high-quality, yet affordable machine for your production? Or do you want to sell yours? For further information or to contact us, please use the contact form.

Condition: used, Year of construction: 1999, functionality: fully functional, turning length: 1,090 mm, turning diameter: 520 mm, spindle bore: 87 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 240 mm, travel distance Z-axis: 1,091 mm, spindle motor power: 18,500 W, total height: 2,030 mm, total length: 4,350 mm, total width: 1,850 mm, feed rate X-axis: 180 m/min, feed rate Z-axis: 20 m/min, overall weight: 6,000 kg, spindle nose: A2-8, Machine taken from production and in working order! Additional options & accessories: - Chip conveyor Bwjdpfxe Ahqvis Agxsw - C-axis - Measuring arm - Collet chuck including collets - 3-jaw chuck - Various drill chucks Weight & dimensions: 6,000 kg approx. 4,350 x 1,850 x 2,030 mm (L x W x H)

Condition: used, Year of construction: 2000, Weiler DA 180 / 1000 - Universal lathes - ACU-RITE position display - 3-jaw chuck, Ø 200 mm - Quick-change tool holder - Coolant system - Work area lighting - Chuck guard - Chip guard - Various tool holders and tools Bjdpfxe Agnynj Agxeww - Operating manual - Year of manufacture: 2000 Technical data Main spindle: - Spindle head according to DIN 55027: Size 6 - Spindle bore: 52 mm - Ø in front bearing: 83 mm - Internal taper: metric 57 - Number of speeds: 12 - Speed range: 33–1500 rpm Tailstock: - Diameter of tailstock spindle: 65 mm - Morse taper: Mk 4 - Lead of leadscrew: 6 mm - Turning tool cross-section: 20 × 20 mm Working ranges: - Swing over bed: 380 mm - Swing over cross slide: 185 mm - Travel of cross slide: 330 mm - Travel of top slide: 120 mm - Travel of tailstock spindle: 120 mm Feeds: - Longitudinal feeds: 0.072 – 4.038 mm/rev - Cross feeds: 0.036 – 2.019 mm/rev Threads: - Metric threads: 0.5 – 28 mm - Inch threads: 56 – 1 TPI - Module threads: 0.25 – 14 - D.P. threads: 112 – 2 Electrical connection: - Drive power: 5.5 kW - Motor rated speed: 1500 rpm Dimensions: - Center height above flat guideway: 180 mm - Center height above floor: 1060 mm - Bed width: 330 mm - Machine dimensions WxHxD: approx. 2400 x 1700 x 1200 mm - Machine weight: approx. 1800 kg

Condition: used, Year of construction: 2020, operating hours: 11,000 h, functionality: fully functional, machine/vehicle number: 192821242, spindle bore: 63 mm, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, total length: 4,950 mm, total width: 5,500 mm, total height: 3,779 mm, workpiece weight (max.): 1,300 kg, type of input current: three-phase, spindle motor power: 35 W, overall weight: 18,000 kg, travel distance X-axis: 670 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 600 mm, workpiece weight between centers: 1,300 g, spindle diameter: 70 mm, workpiece diameter between centers: 1,040 mm, distance between centers: 800 mm, workpiece length between centers: 820 mm, FOR SALE: 5-AXIS CNC AND 3D CMM MEASURING DEVICE 1. MACHINE: AXILE G8 (5-AXIS) Bsdpfs Ahxq Isx Agxeww • Model: January 2020 (Serial No: 192821242) • Condition: Operational in our Istanbul Tuzla factory. • Operating Hours: Only 11,000 hours. • Control Unit: Heidenhain TNC 640 (5-Axis Simultaneous) • Spindle: 20,000 RPM (Built-in Kessler) • Capacity: 670 x 820 x 600 mm / Table: Ø800 mm (1300 kg load) • Extras (Included in the Price): 37 HSK tool holders, Schunk vise, and aluminum riser (for clamping parts up to Ø1040 mm). • Price: 315,000 Euro NOTE: Our machine has been meticulously used in defense industry and precision mold-making projects. It can be inspected on-site. Delivery is EXW (Ex Works). Please call for details.

Condition: used, functionality: fully functional, Mechanic's lathe Manufacturer: WEILER, Model series: MDU 260 Technical data Manufacturer: Weiler Type: MDU 260 Distance between centers: 500 mm Center height: 125 mm Swinging diameter over bed: 260 mm Swinging diameter over cross slide: approx. 150 mm Spindle speed range: 220 to 1,800 rpm Spindle bore: 28 mm Bsdpfo Ahqlkjx Agxjww Dimensions: approx. L 1.10 x W 0.50 x H 1.20 m Weight: approx. 350 kg Equipment • 2 tool stations with Multifix holders • Drill chuck • Rotating center • Habel tailstock with collet chuck + set of collets • Various HSS tools All information is subject to change without notice. A demonstration under power is available at any time in our showroom.

Condition: used, functionality: fully functional, Mechanic’s lathe Manufacturer: WEILER, Model series: MDU 260 Technical data Manufacturer: Weiler Type: MDU 260 Bodj Ahql Ispfx Agxsww Distance between centers: 500 mm Center height: 125 mm Swinging diameter over bed: 260 mm Swinging diameter over carriage: approx. 150 mm Speed range: 110 to 3,600 rpm Spindle bore: 28 mm Dimensions: approx. L 1.10 x W 0.50 x H 1.20 m Weight: approx. 350 kg Equipment • Collet set • Drill chuck • 3-jaw chuck, 2 sets of soft jaws • Multifix holder • 2nd drawbar + set of collets • Following center • Various HSS tools All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 119, spindle motor power: 5 W, turning length: 160 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 99 rpm, turning diameter: 16 mm, overall weight: 2,300 kg, type of input current: three-phase, bar passage: 16 mm, total width: 1,340 mm, total length: 1,850 mm, total height: 1,685 mm, input voltage: 380 V, number of driven tool stations in tool turret 1: 6, number of driven tool stations in tool turret 2: 6, Equipment: documentation/manual, rotational speed infinitely variable, I am offering my lathe for sale, complete with the accessories shown in the pictures. It includes a bar feeder and a chip conveyor. Bedpfx Aoy Udcfjgxeww The machine is controlled by a Yasnac CNC system. The machine has two turrets, allowing for multi-axis and multi-group control.

Condition: excellent (used), Year of construction: 1997, operating hours: 48,889 h, functionality: fully functional, center width: 1,000 mm, center height: 280 mm, spindle speed (max.): 2,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum height: 280 mm Distance between centers: 1000 mm Swinging diameter: 500 mm Diameter of rotation over bed: 570 mm Diameter of rotation over support: 340 mm Spindle speed max.: 2500 RPM MACHINE DETAILS Operating hours: 48,889 h Bwedpfx Aj Afxxbegxjw EQUIPMENT Chuck

Condition: used, Year of construction: 2005, type of input current: three-phase, We offer a used Haas SMINIMILL HE CNC lathe, built in 2005. Bodpo Agcwhsfx Agxsww Manufacturer: Haas Automation, Inc. Model: SMINIMILL HE Serial number: 41201 Date of manufacture: 4/05 Voltage: 360–480 V Phase: 3 Frequency: 50/60 Hz Full-load current: 20 A Largest load current: 35 A Short-circuit interrupting capacity: 10000 A Wiring diagram: 96 / 8100 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), High-precision lathe Schaublin 102N-VM Bsdpfx Ae Ahq I Hsgxjww Technical data: >> Machine no. BL238823 >> Center height 102mm >> Distance between centers 450mm >> Spindle bore 25mm >> Longitudinal feeds, 8 settings from 0.02-0.3mm/rev >> Metric threads, 20 pitches from 0.25 to 4mm >> English threads, 25 pitches from 80 to 6 threads/inch >> Tailstock MK2 >> Spindle speeds from 270-3000 rpm, stepless >> Weight approx. 700 kg Accessories: >> Steel tool holders, 3 pieces >> Quick-change tool post, draw tube, and collets >> Coolant system >> Change gears About the machine: A Schaublin 102VM lead screw lathe is offered for sale. All slides move smoothly and evenly. Even at high speeds, the 102VM runs quietly. The set of gears for thread cutting is included. Take advantage of the opportunity to inspect this machine on-site while it is powered up and to see for yourself its good condition.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Emcomat 17D, lead screw and pull spindle lathe, manufactured in 2013, from a vocational training workshop, CE compliant, in excellent condition!!! Technical data: Bwodpfx Age Afxm Usxsw >> Year of manufacture: 2013, Machine no. D4D 130601 >> Center height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed stages from 40-3000 RPM, infinitely variable >> Quill stroke: 120 mm >> Tailstock: MK3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Footprint / Dimensions approx.: Length 1,600 x Depth 0.9 x Height 1.3 meters >> Weight approx.: 750 kg Accessories and equipment: >> 3-axis position indicator >> 1 three-jaw chuck with 200 mm diameter and 1 set of jaws from Röhm >> 1 four-jaw chuck with 200 mm diameter and 1 set of jaws from Röhm >> 1 quick-change tool holder without collets >> Steel tool rest with 2 pockets >> Chip guard >> Coolant system >> Bed stop About the machine: Offered for sale is an Emcomat 17D, lead screw and pull spindle lathe, manufactured in 2013, in well-maintained condition. The machine is fully functional, of course. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to inspect this machine on-site while it is powered on and to convince yourself of its condition.

Condition: used, Year of construction: 2018, functionality: fully functional, turning length: 1,180 mm, turning diameter: 560 mm, spindle bore: 117 mm, rotational speed (max.): 2,000 rpm, Hyundai WIA L400MC CNC lathe Year of manufacture: 2018 Control system: Fanuc 32i model B Maximum turning diameter: Ø 560 mm Maximum turning length: 1180 mm Spindle bore diameter: Ø 117 mm Chuck size: Ø 381 mm (15") Maximum spindle speed: 2000 rpm Spindle motor power (max./continuous): 37 / 30 kW Spindle torque (max./continuous): 3073 / 2490 Nm Spindle drive: Belt drive with two-stage gearbox Spindle taper: A2-11 C-axis: 0.001° Travel distances X-axis: 320 mm Z-axis: 1200 mm Rapid traverse X/Z: 20 / 25 m/min X/Z guideways: Box – slideways 12-tool turret, BMT 75P C-axis, powered tools Motor power (max./continuous): 7.5 / 5.5 kW Maximum speed: 4000 rpm Torque (max./continuous): 44.7 / 35 Nm Collet size: Ø 26 mm (ER40) Tailstock Bedo Af Ig Rjpfx Agxoww Tailstock taper: MK5 Spindle diameter: Ø 150 mm Spindle travel: 132 mm Tailstock travel: 1100 mm Equipment: - Chip conveyor with tank and pump - 2 powered tool holders (1 straight, 1 angled) - 8 standard tool holders

Condition: used, Intos Zebrak S 32 - Universal Lathe - ACU-RITE DRO 200S position display - 2x 3-jaw chuck, Ø 160 mm - 1x 4-jaw chuck, Ø 140 mm - Collet chuck - Fixed center - Quick-change tool holder - Coolant system - Chuck guard - Chip guard - Work area lighting - Various accessories such as tool holders, collets, tools, and replacement gears Bwjdpfo Ahyzwox Agxow Technical Data - Distance between centers / turning length: 1000 mm - Turning diameter over bed: 320 mm - Turning diameter over carriage / cross slide: 190 mm - Spindle bore: 36 mm - Spindle mounting: M40 (1:2) - Tailstock quill: MK3 - Bed width: 250 mm - Spindle speeds: 20 - 3200 rpm (54 steps) - Longitudinal feeds: 0.03 – 3.52 mm/rev (36 steps) - Cross feeds: 0.015 – 1.76 mm/rev (36 steps) - Metric threads: 0.375 - 44 mm (36 steps) - Inch threads (Whitworth): 3/128" - 2¾" (36 steps) - Module threads: 0.375 – 11 (36 steps) - Diametral pitch: 24 – 2¾ (36 steps) - Motor power: 4 kW - Operating voltage: 400 V - Dimensions WxHxD: approx. 2100 × 1600 x 1000 mm - Weight: approx. 1300 kg

Year of construction: 2016, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of November 16th to November 26th. TECHNICAL DETAILS General Information Machine number: 0307-1866 Operating hours: 9,316 h Control system: Siemens SINUMERIK 840 Dsl Working height: approx. 1,300 mm Electrical Data Operating voltage: 400 V Frequency: 50 Hz Rated current: 315 A Workpiece Area Workpiece length: min. 780 mm Workpiece length: max. 3,000 mm Workpiece diameter: min. 20 mm Bwsdoz Uhydspfx Agxew Workpiece diameter: max. 200 mm Workpiece weight: max. 250 kg Workpiece Drive and Clamping Workpiece drive/clamping: 2 × hydraulically actuated front chucks, manufacturer SAV Chuck bore: max. 210 mm Spindles Spindle power: 2 × 37 kW Speed: 2,200 rpm Cross slide NC1, left X1-axis: 450 mm Z1-axis: 1,980 mm Cross slide NC2, right X2-axis: 450 mm Z2-axis: 1,980 mm M-head slide Q1-axis, left: 1,980 mm Q2-axis, right: 1,980 mm Tailstock and steady rest slide W1-axis, left: 1,980 mm W2-axis, right: 1,980 mm Rapid Traverse Rapid traverse speed: max. 20 m/min EQUIPMENT Portal loading system PROMAT 2 loading units Chip conveyor Coolant system Matching VDI 50 tool holders Partially powered VDI 50 tool holders Chuck jaws Documentation

Year of construction: 2017, condition: used, spindle speed (max.): 5,000 rpm, turning length: 500 mm, CNC Lathe Manufacturer: DMG MORI Model: CTX beta 500 Bjdpfx Ags Ahkf Soxeww Year of manufacture: 2017 Control system: Heidenhain CNC-Pilot 640 Technical specifications: Turning length: 500 mm Spindle speed: 5,000 rpm Drive power - main spindle: 100/40% duty cycle (ED) 25/34 kW Tool interface: VDI 30 Number of tool stations: 16 positions Spindle operating hours: approx. 3,528 h Condition: used Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!