Used Planer Thicknesser for sale (1,658)

Condition: excellent (used), Catalogue number: 7275 TECHNICAL DATA - Max. planing width: 610 mm - Max. planing height: 200 mm From above: - Toothed feed roller Gtsdpfxsx Sx Sij Ah Hjt - Kickback pawls - 2 pressure rollers - Toothed feed roller - Pressure roller - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure rollers - Smooth feed roller From below: - Guide bar - Adjustable infeed table with split, smooth sliding shaft - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth, powered feed rollers - Side pressure roller At the rear: - Side spindles + 2 pressure rollers: 1) Right vertical spindle, 5.5 kW 2) Left vertical spindle, 5 kW - Max. planing height on side spindles: 200 mm - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right 3) Additional horizontal spindle, 160 mm, adjustable up/down and left/right + tilting, approx. 4 kW - Planing possible with the additional spindle from above/below/side - Spindle diameter: 35 mm - Adjustable rollers on lower table - 2 feed speeds - Feed motor: 2.2 kW - Extraction port diameters: 120 mm - Dimensions (LxWxH): 2550 x 1700 x 1350 mm - Approx. weight: 3,000 kg ADVANTAGES - Wide planer for wet and dry timber - Ideal for processing beams, floorboards, etc. - 2 horizontal planing shafts + 2 vertical spindles + 1 horizontal spindle - Complete with cutterheads - Manufactured by German brand KUPFERMUHLE - Used planer in very good condition - Original photos Net price: 58,900 PLN Net price: 14,020 EUR (based on exchange rate €1 = 4.2 PLN) (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 2023, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 800 mm, table length: 1,200 mm, table width: 1,000 mm, spindle speed (max.): 18,000 rpm, Max. feed rate of interpolating axes m/min 35 Max. power installed kVA 65 Max. current requested A 93 Table length mm 1200 Table width mm 1000 Load capacity (centered and evenly distributed) kg 3000 Air flow required for the pneumatic system Nl/min 400 Gtodpfx Ahex Dihie Hst Working pressure of the pneumatic system bar 6 Distance between the table surface and the spindle nose mm 105-905 (in 4.13- 35.62) Max. horizontal passage mm 1430 Height of table surface over the floor mm 800 (in 31.49) The table has 18mm H11 T-slots (central slot H7) for the workpiece clamping, distance 100mm (9 slots).

Condition: used, Available: 2 pieces Price per piece: 239.00 € + VAT knife: Strip planer blade Z2+ chamfer cutter flight circle (ø): 125 mm Gtodpfsx Tu Rwex Ah Het drilling: 40 mm length: 170 mm material: steel

Condition: as good as new (ex-display), SHOWROOM MACHINE For sale is an as-new Record Power PT 107 planer-thicknesser with a planing width of 265 mm. The machine is in original condition, so you receive the full warranty. Technical specifications: - Planing width: 265 mm - Planing table length: 1,110 mm - Max. planing depth: 3 mm - Tiltable fence up to 45° - Cutterblock diameter: 75 mm - Large 3-knife cutterblock - Speed: 4,000 rpm - Max. thicknessing height: 190 mm - Thicknessing infeed width: 265 mm - Feed speed, thicknesser: 5 m/min - Max. depth of cut, thicknesser: 2 mm - Motor: 2.3 HP / 230 V - Power consumption: 2,200 watts - Extraction port: 100 mm Gsdpfx Aouv Exijh Hett - Weight: 162 kg One unit of this planer is available at both A-5431 Kuchl and A-8561 Söding, and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €70 incl. VAT Germany: €90 incl. VAT South Tyrol: €130 incl. VAT Related terms: planer, thicknesser, planer-thicknesser, surfacer, thickness planing Reference: ZXPT107-A

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 6,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 650 mm, table length: 6,300 mm, table width: 2,500 mm, spindle speed (min.): 30 rpm, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 3,500 m/min, rapid traverse Z-axis: 10,000 m/min, distance between stands: 3,050 mm, table load: 30,000 kg, overall weight: 59,000 kg, spindle nose: NT No.50, feed length W-axis: 1,300 mm, Okuma MCR-A5C gantry machining center (2013) with BT50 spindle, 6,500 mm X-travel and 30 t table load. Machine has approx. 5,700 cutting hours and 6,900 spindle hours, suitable for heavy and precise machining of large workpieces. Gtodpfxox Tzyxj Ah Het

Condition: like new (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planer shaft diameter: 40 mm, workpiece height (max.): 120 mm, Weinig Unimat 300 — 4-sided planer 230 x 120 mm Although from 2005, this machine is practically like new! Godpex Upu Tsfx Ah Hett Rarely have we seen one so little used. Looking for an almost-new 4-spindle planer but don’t have the budget for a new one? This Unimat 300 is the perfect pick!

Condition: excellent (used), CATALOG NUMBER 7172 TECHNICAL DATA - planing width: 640 mm - max thickness of workpiece: 230 mm - 4-knife cutterhead Top section: - anti-kickback fingers - toothed, powered infeed roller - pressure bar - planing cutterhead - pressure bar - smooth, powered, metal outfeed roller Bottom section: 2 adjustable sliding rollers in the table - main motor: 5.5 kW - electric table lifting: approx. 0.25 kW - two feed speeds: 0.75 kW - extraction port diameter: 160 mm - dimensions (L/W/H): 1320x1270x1380 mm - weight: 903 kg ADVANTAGES – made in Germany – used thickness planer, in very good condition Net price: 21,900 PLN Net price: 5,200 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the case of significant exchange rate fluctuations, the price may change) Godpfx Ahex Sxyys Hstt

Condition: excellent (used), Year of construction: 2024, travel distance X-axis: 4,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,000 mm, table length: 4,000 mm, table width: 2,500 mm, table load: 12,000 kg, X AXIS (WORK TABLE) 4,200mm Y AXIS (SADDLE) 2,600mm Z AXIS (HEAD) 1,000mm TABLE SIZE 4000mm*2500 T-SLOT SIZE 11x22mmx200mm DISTANCE FROM TABLE SURFACE TO GROUND 890 mm MAX. TABLE LOAD 12,000 SPINDLE TAPER (BT/CAT) BT50/CAT50 SPINDLE SPEED RPM(BT50) 6,000rpm Gtodpsx Evzuefx Ah Hjt RAPID TRAVERSE(X/Y/Z) 10/10/10M/Min. CUTTING FEEDRATE(X/Y/Z) 1~8000mm/min MAGAZINE CAPACITY FOR ARM TYPE 32 TOOL MAX. TOOL DIAMETER(WITH ADJACENT POCKET EMPTY) BT50-Ø125MM MAX. TOOL LENGTH 300mm MAX. TOOL WEIGHT 20 kg Tool Change Time(T TO T/C TO C) 8/12 SEC.

Condition: used, Planer and rabbeting machine Weinig Profimat 23 for four-sided planning and profiling of timber as construction timber, in excellent original condition and including planer heads (2 x 270 mm // 2 x 170 mm) spindle: 5 Godpfox Ttbnjx Ah Hott spindle 1: Bottom / 7.5 kW / 40 mm spindle 2: Right / 11 kW / 40 mm spindle 3: Left / common motor with right / 40 mm spindle 4: Top / 11 kW / 40 mm spindle 5: Bottom / 4 kW / 40 mm working width: 260 mm working height: 160 mm feed: 4 kW

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 610 mm Maximum working width 610 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Gsdpfx Ajx Upt Aeh Hett Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: excellent (used), CATALOG NUMBER 7164 TECHNICAL DATA - Max processing width: 220 mm - Max processing height: 130 mm 4 spindles: 1) Bottom horizontal: 220 mm, approx. 5.5 kW 2) Right vertical: 130 mm 3) Left vertical: 130 mm; (spindles 2 & 3) 7.5 kW 4) Top horizontal: 220 mm, 7.5 kW - 4th spindle adjustment: electrically adjustable up/down - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Top: 4 driven infeed rollers, toothed - Top: 1 driven outfeed roller, rubber - Bottom: 1 driven outfeed roller, rubber - Feed on Cardan shafts - Variable feed speed adjustment - Feed motor: 1.5 kW - Lifting motor: 0.75 kW - Electric thickness adjustment - Infeed table length: 1960 mm - Central lubrication - Extraction port diameter: 3x120 mm, 140 mm Gjdsx Sxxvjpfx Ah Hstt - Enclosed in soundproof cabin - Dimensions (L/W/H): 3430x1500x1430 mm - Weight: approx. 1500 kg – 4-head model – German-made – Not repainted – Used planer, in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on EUR/PLN rate at 4.2) (Prices subject to change according to exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2024, travel distance X-axis: 2,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, table length: 3,500 mm, table width: 2,500 mm, spindle speed (max.): 24,000 rpm, torque: 39 Nm, Drives – Linear axes Feed rate X-, Y-, Z-Axis up to 60 m/min Acceleration X-, Y-, Z-Axis up to 3 m/s² Drives – Rotary axes – VH10 Feed rate A-, C-Axis 180 °/s Acceleration A-, C-Axis 700 °/s² Resolution A-, C-Axis 0,0001° Accuracy – Linear axes, according to VDI/DGQ 3441 according to ISO 230-2 Positioning accuracy X- Axis P≤ 0,015 mm A≤ 0,011 mm Y- Axis P≤ 0,017 mm A≤ 0,013 mm Z- Axis P≤ 0,013 mm A≤ 0,010 mm Repeatability X- Axis Ps≤ 0,007 mm R≤ 0,006 mm Y- Axis Ps≤ 0,008 mm R≤ 0,007 mm Z- Axis Ps≤ 0,006 mm R≤ 0,005 mm Milling spindle - 34 kW Spindle power S1 (100% ED) 34 kW S6 (40% / 2 min) 41 kW Spindle speed 24.000 min-1(Permanent grease lubrication ) Torque S1 (100% ED) 39 Nm S6 (40% / 2 min) 49 Nm Constant power 8.260–24.000 min-1 Swivel axis – spindle nose 250 mm Tool holder HSK-A63 Tool clamping Spring clamp Tool unclamping Hydraulic Blowing air supply external and through tool Gtsdjx Elhqjpfx Ah Hot Coolant supply external and through tool

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Gtsdpfx Aex Uptioh Hjt Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: excellent (used), CATALOG NUMBER 7133 TECHNICAL SPECIFICATIONS - max. working width: 220 mm - max. working height: 120 mm – 5 spindles: 1) bottom horizontal – 220 mm, 5.5 kW 2) right vertical – 120 mm 3) left vertical – 120 mm; spindles 2 and 3, 11 kW each 4) top horizontal – 220 mm, 11 kW 5) bottom horizontal – 220 mm, 5.5 kW - all spindles adjustable up/down, left/right - spindle diameter: 40 mm - pneumatic pressure rollers - 4 driven, gear-feed rollers from above, including 2 double - 1 double outfeed roller from above, smooth, rubber-coated - 1 outfeed roller from below, rubber-coated - feed via Cardan shafts - adjustable feed speed - feed motor: 2.2 kW - lifting motor: 0.25 kW - electric thickness adjustment - infeed table length: 1970 mm - central lubrication - extraction port diameter: 4x120 mm, 1x140 mm - dimensions (LxWxH): 3500x1550x1400 mm - weight: 1750 kg ADVANTAGES – with 5 cutter heads – German-made – original paint (not repainted) – used planer, in very good condition Net price: 48,900 PLN Net price: 11,640 EUR (depending on 1 EUR = 4.2 PLN) Gtjdpfx Ajx Swx Uoh Het (Prices may change based on currency fluctuations)

Condition: excellent (used), Catalog number: 7294 TECHNICAL DATA - Maximum workpiece width: 230 mm - Minimum workpiece width: 15 mm - Maximum workpiece height: 160 mm - Minimum workpiece height: 10 mm 7 spindles: 1) bottom horizontal 230 mm 7.5 kW 2) right vertical 160 mm 5.5 kW 3) left vertical 160 mm 5.5 kW 4) right vertical 160 mm 5.5 kW 5) top horizontal 230 mm 7.5 kW 6) upper horizontal 230 mm 7.5 kW 7) lower horizontal 230 mm 5.5 kW - All spindles adjustable vertically and horizontally - Spindle diameter: 40 mm - Spindles 3, 5, and 6 are electrically adjustable from the control panel to the required dimension (ATS) - Motor: 2 x 0.37 kW - Spindle diameter: 40 mm - All spindles equipped with a brake Top feed: - 8 feed-in rollers, toothed, metal, including 2 double rollers - 3 feed-out rollers, rubber, double Bottom feed: - Feed-in roller, toothed, driven, pivoting - 3 feed-out rollers, driven, metal, smooth - Rollers pneumatically loaded - Infeed table length: 2480 mm - Centralized table lubrication - Electric thickness adjustment - Body lifting motor: 0.56 kW - Infinitely variable feed speed via inverter: 6–24 m/min - Feed motor: 3.7 kW - Feed by Cardan shafts - Extraction nozzle diameter: 7 x 125 mm - Dimensions (L/W/H): 5520 x 1930 x 1900 mm - Weight approx. 4000 kg ADVANTAGES – Equipped with 7 heads – Ideal for both wet and dry timber – With ATS – Original DTR + CE documentation – Unrepainted – Used planer, in excellent condition Original photos Net price: 169,900 PLN Net price: 40,450 EUR (based on exchange rate of 4.2 EUR) Gjdpex Swxhefx Ah Hjtt (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7130 TECHNICAL DATA - Maximum working width: 800mm - Maximum working thickness: 200mm Top section: - Pawls - Toothed feed roller - 3 rows of pressure rollers - Planing shaft 810mm, for 4 knives (2 blades fitted), approx. 7.5kW - Pressure - Smooth, metal feed roller Bottom section: - Adjustable infeed table with slip roller - Planing shaft 810mm, for 4 knives (2 blades fitted), 7.5kW Gjdpox Sww Dsfx Ah Hjtt - Smooth, metal slip roller - Electric table raising - Extraction nozzle diameter: 120mm - Dimensions (L/W/H): 1900x1450x1350mm - Weight approx. 2500kg – Czech manufacture – Very good condition – Used planer Net price: 33,500 PLN Net price: 7,970 EUR depending on EUR 4.2 rate (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6507 TECHNICAL DATA SURFACE PLANER: - shaft width: 510mm - rollers in the bottom table - original cast iron tilting fence - table length: 1810mm - both tables adjustable THICKNESSER: - max thickness of workpiece on thicknesser: 200mm - cutterhead guard on the thicknesser from above: - pawls - geared infeed roller - pressure bar - planer cutterblock - pressure bar - smooth outfeed roller from below: - 2 adjustable rollers in the bottom table - 2 feed speeds - main motor: 2.95kW - dimensions (LxWxH): 1940x1200x1120mm Godpjx Swqkjfx Ah Hstt - weight: 970kg Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7556 Gedpevyzn Rofx Ah Hstt Technical specifications: - Min / max working width: 20 / 240 mm - Min / max working height: 8 / 160 mm - Number of spindles: 4 1) Bottom horizontal, 240 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 240 mm, 7.5 kW - All heads adjustable vertically and horizontally - Spindle diameter: 40 mm – Top: - 6 powered infeed rollers, toothed (including 2 double rollers) - 2 powered outfeed rollers, smooth rubber – Bottom: - Lateral pressure before and after the roller on the lower table - Powered infeed toothed roller, swiveling, on the lower table before the first spindle - 2 pneumatic lateral pressure units - Powered outfeed roller, smooth metal - All rollers pneumatically loaded - Infeed table length: 2180 mm - Table adjustable vertically - Centralized lubrication - Electric thickness adjustment - Lifting motor: 0.75 kW - Stepless feed speed adjustment via inverter: 6–30 m/min - Feed motor: 3 kW - Feed through Cardan shafts - Enclosed in a cabin + - Extraction outlet diameter: 4 x 150 mm - Dimensions (L x W x H): 3750 x 1750 x 1800 mm - Weight: 3300 kg ADVANTAGES – Four-head configuration – Ideal for wet and dry wood – Used machine, excellent condition Net price: 75,900 PLN Net price: 18,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 6946 TECHNICAL DATA - Max. working width: 210mm - Max. working thickness: 120mm - Number of spindles: 2 pcs - Spindle diameter: 50mm From above: - 3 infeed feed rollers, rubber, smooth, including 2 double rollers - 2 outfeed feed rollers, rubber, including 1 double roller - Cutterheads on supports - Cutterhead up/down adjustment - Electric adjustment of top cutterhead height - Electric setting of planing thickness - Spindles equipped with brake - Main motor: 2×5.5kW - Stepless feed speed adjustment - Feed motor: 3kW - Feed via Kardana shafts - Extraction nozzle diameter: 2x160mm - Dimensions (L/W/H): 2350x1780x1950mm - Weight: 1882kg – Made in Germany – Jointers for sharpening knives on the cutterhead – 2 Hydro cutterheads included – Not repainted – Very good condition, used planer Net price: 33,900 PLN Gjdpfx Aex Rq Nwjh Hott Net price: 8,070 EUR Net price calculated at 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6904 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 130 mm 6 spindles: 1) Lower horizontal spindle 230 mm, 5.5 kW 2) Right vertical spindle 130 mm 3) Left vertical spindle 130 mm (spindle 2 and 3), 7.5 kW 4) Upper horizontal spindle 230 mm, 5.5 kW 5) Lower horizontal spindle 230 mm, 5.5 kW 6) Universal spindle 230 mm, adjustable 360°, 5.5 kW - All spindles adjustable up/down, right/left - Spindles 1, 2, 3, 4, and 5 equipped with electric brake - Spindle diameter: 40 mm - Upper infeed: 5 driven, toothed rollers - Upper outfeed: 4 driven, smooth rubber rollers (including 2 double rollers) - Lower feed: 1 driven rubber roller - Feeding via Cardan shafts - Rollers with pneumatic pressure adjustment - Infinitely variable feed speed - Feed motor: 4 kW - Working pressure: 6–10 bar - Electric adjustment of planing thickness - Body lifting motor: approx. 0.55 kW - Central lubrication of the table - Infeed table length: 1970 mm - Extraction ports diameter: 2 x 140 mm, 4 x 135 mm - Dimensions (L x W x H): 4430 x 1830 x 2000 mm - Weight: approx. 3500 kg ADVANTAGES – German production, WEINIG brand – Equipped with 6 cutterheads – DTR technical documentation included – Universal spindle – Used planer, condition: very good Net price: 97,900 PLN Net price: 23,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR Gtsdpfx Ahsx Rq Iye Hot (Price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 6950 TECHNICAL DATA Gedpfjx Rqutox Ah Hott - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm – 4 spindles: 1) Horizontal bottom, 220 mm, 5.5 kW 2) Vertical right, 130 mm 3) Vertical left, 130 mm; (spindles 2 and 3) 5.5 kW 4) Horizontal top, 220 mm, 5.5 kW - 4 electrically adjustable spindles (up/down) - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - 4 upper infeed drive rollers, gear-driven, including 1 double roller - 1 double upper outfeed drive roller, rubber-coated - Lower outfeed drive roller, rubber-coated - Feed via Cardan shaft rollers - Infinitely variable feed speed: 6–22 m/min - Feed motor: 2.2 kW - Lifting motor: 0.55 kW - Electric planing thickness adjustment - Infeed table length: 1970 mm - Central lubrication system - Extraction port diameter: 3x120 mm, 140 mm - Enclosed in cabin - Dimensions (LxWxH): 3350 x 1400 x 1400 mm - Weight: 1700 kg – German-made – Unpainted – Used planer, very good condition Net price: 38,900 PLN Net price: 9,260 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 6679 TECHNICAL DATA - Maximum workpiece width: 250 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Lower horizontal 250 mm 5.5 kW 2) Right vertical 170 mm 5.5 kW 3) Left vertical 170 mm 5.5 kW 4) Upper horizontal 250 mm 7.5 kW 5) Lower horizontal 250 mm 7.5 kW 6) Universal 250 mm, 360° adjustable, 5.5 kW - 6th spindle electrically adjustable up/down - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Top: 6 powered, toothed, infeed rollers including 2 double rollers - Top: 6 powered, rubber, smooth, outfeed rollers including 2 double rollers - Top: 2 hold-downs Gtsdox Rqumspfx Ah Hot - Bottom: 1 powered, toothed, swivelling infeed roller before the first spindle - Bottom: 2 powered, metal, smooth outfeed rollers - Bottom: 4 lateral pressure rollers - Feed drive using Cardan shafts - Pneumatic pressure rollers - Infinitely variable feed speed via inverter: 6–30 m/min - Feed motor: 4 kW - Working pressure: 8–10 bar - Electric thickness adjustment - Lifting motor: 1.1 kW - Central table lubrication - Infeed table length: 2180 mm - Extraction port diameter: 6 x 150 mm - Dimensions (L/W/H): 5000 x 1800 x 1900 mm - Weight: approx. 4600 kg ADVANTAGES – Italian manufacture – 6-head configuration – Full DTR technical documentation + CE certification – Ideal for both wet and dry wood – Universal spindle – Excellent condition / as new Net price: 134,900 PLN Net price: 32,100 EUR Net price calculated at 4.2 PLN/EUR (price may vary in case of significant exchange rate fluctuations)

Condition: excellent (used), Catalogue No. 6747 TECHNICAL DATA - Maximum planing width: 170 mm - Maximum planing height: 130 mm 7 spindles: 1) Bottom horizontal spindle: 170 mm, 4 kW 2) Right vertical spindle: 130 mm, 5.5 kW Gtodpfex Rquasx Ah Hst 3) Left vertical spindle: 130 mm, 5.5 kW 4) Additional right vertical spindle: 130 mm, 5.5 kW 5) Top horizontal spindle: 170 mm, 4 kW - 5th spindle with electric height adjustment 6) Additional bottom horizontal spindle: 170 mm, 5.5 kW 7) Universal spindle: 170 mm, adjustable up to 180°, 7.5 kW - Spindle diameter: 35 mm (all spindles) - All spindles adjustable vertically and horizontally - Top: 6 powered feed rollers (toothed), including 2 double rollers - Top: 4 outfeed rubber rollers - Pneumatically pressed rollers - Side pressure roller included - 2 guide rails in the table - Electrically adjustable planing thickness: 0.37 kW - Infeed table length: 2,480 mm - Stepless feed speed adjustment - Feed motor: 2.2 kW - Extraction port diameters: 1 x 135 mm, 5 x 120 mm - Dimensions (LxWxH): 5,550 x 1,900 x 1,660 mm - Weight: approx. 3,500 kg FEATURES – Made in Germany – Equipped with 7 cutterheads – Universal spindle – Used planer, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 6765 TECHNICAL DATA - max. working width of element: 230 mm - max. working height of element: 160 mm Number of spindles: 4: 1) lower horizontal, 230 mm, 5.5 kW 2) right vertical, 160 mm, 5.5 kW 3) left vertical, 160 mm – electrically adjustable left/right from the control panel, 5.5 kW 4) upper horizontal, 230 mm – electrically adjustable up/down from the control panel, 7.5 kW - all spindles adjustable up/down, left/right - spindle diameter: 40 mm from the top: - driven infeed rollers, geared, 6 pcs (incl. 2 double rollers) - driven outfeed rollers, rubber-coated, 2 pcs from below: - infeed roller, driven, geared, metallic, swiveling in the lower table - outfeed roller, driven, metallic, smooth Gtodpox Rqt Aefx Ah Het - pneumatically adjustable rollers - length of infeed table (with pneumatic feeder): 3390 mm - possible operation without activating the pneumatic feeder; the table is height-adjustable - central lubrication - electric thickness adjustment - variable feed speed adjustment - feed via cardan shafts - feed motor: 4 kW - enclosed in cabin - extraction port diameter: 4 x 120 mm - dimensions (L x W x H): 7000 x 1950 x 1700 mm - weight: approx. 3000 kg - suitable for wet and dry wood - pneumatic feeder on the infeed table - second-hand planer, in very good condition Net price: 89,900 PLN Net price: 21,400 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 6393 TECHNICAL DATA - Maximum workpiece width: 200 mm Gtjdpfox Rqtvsx Ah Hst - Maximum workpiece height: 150 mm - Number of spindles: 4: 1) Bottom horizontal, 200 mm, 5.5 kW 2) Right vertical, 150 mm, 4 kW 3) Left vertical, 150 mm, 4 kW 4) Top horizontal, 200 mm, 5.5 kW - All cutterheads adjustable vertically and horizontally - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm From above: - 6 feed-in traction rollers, toothed (including 2 double) - 1 feed-out traction roller, rubber-coated From below: - Feed-in drive roller, toothed, steering, integrated in lower table - 3 side pressure rollers - Feed-out traction roller, metal, smooth - All rollers pneumatically loaded - Infeed table length: 2,130 mm - Height-adjustable table - Centralized lubrication system - Electric adjustment of planing thickness - Lift motor: 1.1 kW - Stepless feed speed control via inverter - Feed drive motor: 3 kW - Feed via Cardan shafts - Fully enclosed in cabin - Extraction port diameters: 4 x 130 mm - Dimensions (LxWxH): 3,550 x 1,750 x 1,800 mm - Approx. weight: 3,000 kg ADVANTAGES – Equipped with 4 cutterheads – Ideal for wet and dry timber – DTR operation and maintenance manual included – Used machine, very good condition Net price: 65,900 PLN Net price: 15,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)