Planer

Weinig Hydromat 23

Condition: excellent (used), Weinig Hydromat 23C with 6 Spindles. Max width 245mm Max Thickness 160mm Separate electrical panel. Separate remote control panel Automatic lubrication system for bedplates Full heavy duty sound enclosure. 15kW feed motor 100m/min No 1.  7.5kw - Bottom 6000rpm straight jointer prepared No 2. 11kw - Right 6000rpm straight and profile jointer prepared No 3. 15kw - Left 6000rpm straight and profile jointer prepared No 4 . 15kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 5 . 30kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 6 . 15kw - Bottom 6000rpm + Outboard bearing + straight and profile jointer prepared Gtedpfx Aex N T Imsf Nst 50mm spindles Beam 0.55kW Full documentation included. Heavy duty sound enclosure. Possible to supply with hydro tooling if needed. Possible to supply with full mechanisation if needed.

Condition: excellent (used), Year of construction: 2010, operating hours: 44,600 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 570S2200-400/170e² Baujahr: 2010 Schließkraft: 220 Tonnen Godpju E E H Ssfx Af Nstt Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht: 141 g/PS Schnecken DN 2: 30 mm Hubvolumen: 59 cm³ Spritzteilgewicht: 47 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2010 Förderband Schutzzaun

Condition: excellent (used), functionality: fully functional, Working width: 230 mm Working height: 160 mm Number of spindles: 5 Spindle configuration: 1. Bottom 15 kW 2. Right 11 kW 3. Left 11 kW 4. Top 15 kW 5. Bottom 7.5 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm 3 feed rollers in the work table Gtedpfx Afsx Hzv Tj Net Feed speed adjustable via inverter up to 60 m/min Feed driven by cardan shaft Pneumatic pressure rollers Technical documentation Machine dimensions: 300x180x170 cm (H) Weight: 3500 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, number of spindles: 6, Four-side planer and moulder Manufactured by Weinig Type: Hydromat 23C Year of manufacture: 2005 Working width: 230 mm Working height: 120 mm 6 spindles Spindle arrangement: bottom/right/left/top/top/bottom Spindle motors: 7.5 kW each Automatic table lubrication Automatic Memory System control system Spindle diameter: 40 mm Gjdpfx Asx E Ak Aof Nstt Spindles with bearings on both sides The last two heads are equipped with jointers

Condition: refurbished (used), - Manufacture year 2007completely overhauled - BONGIOANNI variable cut axis system - 5 headlocks - 4 log turners - New control unit - New feed system Gjdpfxetta I Es Af Nott - New electric cabinet/control SPS - Frame and rail system - Pantograph - New drive nom. 44kW

Condition: good (used), Year of construction: 1998, functionality: fully functional, Four-side planer Weinig Hydromat 23, finger jointing machine 8 spindles, Working width: 230 mm, Working height: 160 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (7.5 kW) 2-Right (7.5 kW) 3-Left (7.5 kW) with profile jointer 4-Right (7.5 kW) with profile jointer Gtodpfxexqh E Hs Af Nst 5-Top (7.5 kW) with hydraulic clamping 6-Bottom (30 kW) with hydraulic clamping 7-Top (7.5 kW) with hydraulic clamping and straight jointer 8-Bottom (7.5 kW) with hydraulic clamping and straight jointer. Hard coating. Two powered rollers in the table.

Condition: good (used), Planing width 20-230mm Planing height 8-160mm Number of heads 6 Arrangement of heads Bottom Right Left Right Top Bottom Drawing rollers in work table 4 Gtedpfx Aovbwzvef Not Pneumatic pressures hydraulic feeder

Condition: new, Working width (finished size) 23 – 180 mm Gtsdoiiv Dcjpfx Af Nst Working height (finished size) 6 -105 mm Min. length of single workpiece 300 mm Feed speed 6 – 12 m/min Motor power horizontal spindles 2 x 7.5 kW Motor power vertical spindles 1 x 7.5 kW Spindle speed 6000 rpm Spindle diameter 35 mm Clamping length vertical spindles 120 mm Clamping length horizontal spindles 190 mm Manual lubricant pump Profile capacity without axial adjustment on vertical spindle 10 mm Los roller integrated in the outfeed table Suction DM 4 x 120 mm Including OPTIONS: - Motor-driven feed roller in front of the planer with lever for quick changeover - Front vertical printing unit in front of the left vertical spindle - Feed table length 2300 mm - Tool package consisting of 4 planing heads and a joint rebate cutter

Condition: excellent (used), working width 230mm working height 120mm Gjdsw Ad H Topfx Af Nett 6 heads feeding speed max 60m/min heads set: bottom/right/left/top/top/bottom all motors 7,5kW automatic table lubrication Memory system automatic controller two side spindle holder two last heads with manual jointer

Condition: excellent (used), Weinig Hydromat 23C with 6 Spindles. Max width 245mm Max Thickness 160mm Separate electrical panel. Separate remote control panel Automatic lubrication system for bedplates Full heavy duty sound enclosure. 15kW feed motor 100m/min No 1.  7.5kw - Bottom 6000rpm straight jointer prepared No 2. 11kw - Right 6000rpm straight and profile jointer prepared No 3. 15kw - Left 6000rpm straight and profile jointer prepared No 4 . 15kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 5 . 30kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 6 . 15kw - Bottom 6000rpm + Outboard bearing + straight and profile jointer prepared 50mm spindles Beam 0.55kW Full documentation included. Heavy duty sound enclosure. Possible to supply with hydro tooling if needed. Gtjdpfx Asx Dq Rfof Njt Possible to supply with full mechanisation if needed.

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Swivel to right: 15°/30° Optional wheel guard for wheel set max width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Gtedpew T Sc Njfx Af Nst Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar All technical specifications are given without obligation and subject to errors or omissions.

Condition: excellent (used), Four-side planer Weinig Hydromat 23C Working width: 230 mm Working height: 160 mm Number of spindles: 7 Spindle arrangement: 1. Bottom 15 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 15 kW 5. Bottom 30 kW (multi-blade saw) 6. Bottom 7.5 kW (hydro support) 7. Top 7.5 kW (hydro support) Spindle speed: 6000 rpm Spindle diameter: 50 mm 4 feed rollers in the worktable Feed speed adjustable via frequency inverter up to 36 m/min Gtodpexlcufefx Af Nst Feed drive powered by cardan shaft Pneumatic pressure elements Technical documentation

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings Gtsdpfx Afswvqkle Net • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2012, Set for finger jointing in medium and mass production. The machine is technically efficient and in good condition. Gsdpfxolu D Tfo Af Nstt Several sets of tools are included. Characteristic: – industrial set with one tenoning machine. Loading the package under the supervision of the operator enables the processing of inferior raw material, – sensitivity controlled by microprocessors /automatic control/, – turning the package after 1 treatment on the turntable (sharp connection) or turning the package on the back (furniture joint with a line; unique GOMA solution), – the set includes an automatic station for loading the press, – the possibility of using cuts on the press, Tenoner with feed table Data Values Milling spindle fi 50x210 mm Spindle speed 6000 rpm 18.5 kW motor Tool dimensions fi 250x160 mm The saw spindle aligns the face Special chipper fi 300x8 mm 6 kW / 3000 rpm motor Stepless feed table Working width x working height 600 x 30-160 mm Glue nozzle outline by tool PRESS FC-10 PZ6/2 Data Values Board width 30-160 mm Jufefe Board thickness 20-70 mm The length of the finished board is 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic power pack 3 kW / 140 bar

Condition: excellent (used), Year of construction: 2003, Weinig Hydromat 23C with 6 Spindles. Separate electrical panel. Automatic lubrication system for bedplates Maximum dimensions 140mm x 230mm No 1.  11kw - Bottom 6000rpm + Outboard bearing - straight jointer prepared No 2. 11kw - Right 6000rpm - straight and profile jointer prepared No 3. 11kw - Left 6000rpm - straight and profile jointer prepared Gtedoxgq Rdepfx Af Not No 4 . 15kw - Top 6000rpm + Outboard bearing - jointer prepared No 5 . 11kw - Top 6000rpm + Outboard bearing - straight jointer No 6 . 18.5kw - Bottom 6000rpm + Outboard bearing - straight jointer 7.5 kw feed. 6-60m/min (Possible to increase speed as needed). 50mm spindles Beam 0.55kW Full documentation included. Possible to supply with hydro tooling if needed. Possible to supply with infeed and outfeed if needed.