Used Plastic Bowls for sale (6,992)

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition. Djdpfxjuzn Nns Afpoun

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-S-400-70 Year of manufacture: 2010 Serial number: 214269 Control system: Control system: Arburg Selogica Direct Operator panel: operator terminal Control cabinets: complete control and power supply cabinets Clamping unit parameters: Clamping force: 400 kN Injection unit parameters: Screw diameter: 18 mm Dedpfx Afsx Eirwjpoun Part handling system: Manufacturer: ARBURG Type: Multilift Number of axes: 3-axis extraction robot Moulded part transport: Cycle conveyor – length/width: 2,000 × 800 mm

Condition: used, Year of construction: 2021, functionality: fully functional, clamping force: 2,500 kN, Arburg Allrounder 630A Multi Component Plastics Injection Moulding Machine (2021) Arburg Allrounder 630A 2500-800/400 L2, 2500kN clamp force multi-component plastics injection moulding machine (2021) including 800 horizontal injection unit and 400 vertical injection units Dedpfsygx Urox Afpoun

Condition: excellent (used), Eos EOSINT plastic laser-sintering system Here we offer an Eos EOSINT plastic laser-sintering system. Eos EOSINT Plastic Laser-Sintering-System P385 The EOS P385 system includes the following Installation space container Powder container Cooler: Termo TEK Termochiller 1100 The following upgrade has already been performed : Software: CD's Eosint P3 process software PSW 3.2 for Windows 2000, XP Materialice: Magics RP 9.0 Machine upgrade from P360 to P385 on 10.08.2007 Laser change 15.05.2008 X Drive Motor. Change of used engine 04.05.2020 Pyrometer change 30.06.2020 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V A, frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. Laser power 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT Upgrade P385 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Dedpfx Aef Ey Eaefpeun We can answer further questions for you on the phone.

Condition: ready for operation (used), PE-KPE pipe welding machine, butt fusion machine, plastic pipe welder, mirror fusion machine, DYTRON ST 160, Used machine Manufacturer: DYTRON Model: ST 160 Overall dimensions: Length: 1000 mm Width: 530 mm Height: 1160 mm Electrical data: 230 V DYTRON – Welding Bench ST-160 The ST 160 welding bench is designed for socket and mirror welding of thermoplastic pipes. It supports: Dodsxnqt Uepfx Afpoun Mirror (butt) welding: 40 – 160 mm diameter Socket welding: 40 – 110 mm diameter To facilitate mirror welding, the set includes: Special mobile workbench Electric pipe planer POLYS P-4a welding unit (1200 W) Clamp inserts in sizes: d40, 50, 63, 75, 90, 110, 125, 140 mm Welding pair sets: d40, 50, 63, 75, 90, 110 mm Vise-style clamping mechanism for fittings Mirror insert: d170 Metal case for accessories Support stand Allen keys: 4 mm and 8 mm The ST-160 welding bench is equipped with a microprocessor-controlled welding unit. The standard set also includes a special workbench and a metal case with accessories. ST-160 Technical Specifications Feature Specification Socket welding range 40 – 110 mm Mirror (butt) welding range 40 – 160 mm Welding unit power 1200 W Planer power 630 W Power supply 230 V / 115 V Temperature control Electronic regulator Temperature range 180 – 280 °C Temperature indicator LED diode Planer Electric Weight 70 kg

Condition: ready for operation (used), Year of construction: 2012, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 17137, CNC machine with 0 operating hours. The machine is now only EUR 18,500. Djdpfx Afew H N Nzopjun

Condition: good (used), - 10 stainless steel silos - Brand: AZO - Previously used for: PVC powder - Condition: The silos have always been stored indoors and are in very good condition. Technical details: • Capacity: 12 metric tons / approximately 7.2 m³ • Each silo equipped with vibrating discharge base • Each silo equipped with discharge valve (rotary valve) • Provided with pneumatic conveying pipe Dujdpfxjx E U Hco Afpon Price per silo: €4,750 Ex Works, Rotterdam region Payment terms: 100% prepayment before delivery The silos are offered as is, where is, loaded onto truck Single unit purchase possible Available while stocks last The silos will be professionally dismantled by Plastima Used Machinery and partner; after dismantling, they will be ready for collection for your own transport or we can arrange shipping on behalf of Forbo. Collection/shipping can be scheduled between January 12, 2026 and February 16, 2026. If you would like to inspect the silos, we would be pleased to arrange an appointment with you.

Condition: new, functionality: fully functional, Year of construction: 2025, Product overviews of Waste Industrial Timber Wood Pallet Double Shaft Shredder Shredders can generally be used to shred hard-to-break plastics, rubber, large tires, large nylon materials, large pieces of fishing nets, fibers, paper, wood, electrical devices, cables, PET bottles, cardboard, wood, plastic barrels, etc. Solid objects. The main function of the equipment is to squeeze the bulk materials and large-diameter drum metal materials that are not convenient for transportation through the shear of the shredder, and shred them into sheets that meet the requirements. The main structure of the double-shaft shredder is a feed hopper, a knife roller, a driving device, a bearing, a hydraulic system, and an electric control box system. Working principle: All kinds of waste materials enter the shredding chamber through the feeding hopper. The double-knife rollers do relative rotation to shred and cut the materials, and then the materials are discharged from the shredder to achieve the shredding of large pieces of materials. Applicable materials and fields Double shaft shredder is one of ethential equipment for waste recycling in following fields and materials: +Bulky Waste: Sofa,Mattress,Chair, Funiture,Windows,etc +Industrial Waste: Textiles,Leather,Rubbers, Leathers ,General industrial waste,etc Dedpfovn D I Nsx Afpjun +Hazardous Solid waste: Medical waste,Paint sludge,Radioactive waste,Hazardous waste oil drum,Jumbo bag,etc +Paper waste: Carton,Cardboard,Book,Newspaper,Document,Brochure,Packaging paper,etc +Garden waste: Branch, Wood pallet, Trunks, Boards,etc +Domestic waste +Biomass straw: Straw, Bamboo, Corn, Sorghum straw, Bean straw, Fruit shell, Palm shell, etc +Scrap metal: Car Shell, Aluminum casting, Household appliances, Scrap light metal,Automobile hub,etc +Paper mill waste: Paper mill slag, Paper mill rope, Paper mill offcut,etc +Wood pallet, scrap furniture, waste chair, tree roots recycling, etc. Double shaft shredder main body: The main body is welded with excellent steel plate to ensure the stability of the equipment under heavy load for a long time. Bearing: The bearing seat is split and easy to disassemble, and the movable knife, fixed knife, bearing and other parts can be quickly removed, and it is easy to maintain and replace the knife. The sealing structure can avoid the contact of broken materials and grease, and can also protect bearings and gears when handling liquid materials.

Condition: like new (used), Bowl cutter Manufacturer: Seydelmann adjustable knife speeds 2 mixing speed 2 separate bowl speeds Completely made of special stainless steel Dujdpfsxuliksx Afpen 200 liters bowl volume made of stainless steel Dimensios: 300x250x200cm Power: 110 kW Net weight: 2880 kg

Condition: good (used), This filling machine was filling 3 litre tubs of honey. It can be supplied at extra cost with two GlobeTech tub lidding machines which worked in line with it. Dsdpjpfdhpefx Afpsun

Condition: used, Year of construction: 2017, Ser.-No. 138524-100, Control unit: Type Unilog B8, Clamping force: 1,100 kN, Tie bar clearance: 470 x 420 mm, Mould installation height: 200 - 450 mm, Opening stroke: 380 mm, Maximum platen distance: 830 mm, Ejector stroke (hydraulic/electric): 140/125 mm, Ejector force: 25 kN, Dry cycle time: 1.5 s per 294 mm, Maximum mould weight: 1,000 kg, Minimum mould dimension: 296 x 296 mm. Injection unit: Type 350, Screw diameter: 25 mm, Screw stroke: 175 mm, Screw L/D ratio: 22, 1 hydraulic core pull, Calculated shot volume: 85.9 - 220 cm³, Specific injection pressure: 1,595 - 3,000 bar, Maximum screw speed: 350 rpm, Screw torque: 340 - 500 Nm, Nozzle stroke/nozzle force: 250 mm/40 kN. Dosing unit: Manufacturer Movacolor. Injection/dosing unit: Manufacturer Wittmann, Type Feedmax S3-NET, Year 2017. Sprue picker/robot: Manufacturer Wittmann, Type WP80, Year 2018, Travel axes X/Y/Z: 100 x 550 mm x 90°, Compressed air hose reel: Manufacturer Metabo, Type SA250, L 25 m. Machine weight: 4,800 kg, Operating hours: 42,853. Dusdpfxeyc Sqxj Afpen This item is part of an online auction Sale is subject to the approval of the client.

Condition: used, Year of construction: 2017, Serial No. 138264-100, control system type Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, maximum platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, maximum mould weight 1,800 kg, minimum mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, theoretical shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, maximum screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 46,038. Djdpfx Afjyc Sh Djpjun This item is part of an online auction. The sale is subject to the approval of the seller.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, color: green, overall weight: 36 kg, maximum load weight: 400 kg, machine/vehicle number: 1, We offer used plastic BIG BOXES for fruit and vegetables in very good condition. Actual photos Duedpfxovza N Ne Afpjn Dimensions: 1200x1000x625 mm Net weight: 33 kg 4 legs Current quantity available for sale: 300 pcs EXW Nové Mesto nad Váhom/Slovakia

Condition: ready for operation (used), A welding machine Pfaff including a rotary shear Kuris and an unwinding device MK is available. 1) Welding machine Pfaff 8309. 2) Rotary shear Kuris BOM 101. 3) Unwinding device MK Sewing Technology Systems. Documentation available. An on-site inspection is possible. The system is dismantled and ready for loading. Dusdpfx Afew I E Dijpon

Condition: new, Year of construction: 2023, functionality: fully functional, RAL series plastic feeders consist of a stainless steel charging hopper mounted on a plasticizing system and a high-capacity intake unit. The unit is equipped with motor overload protection and a plastic shortage alarm. Dusdorwwxwjpfx Afpon

Condition: excellent (used), Eos EOSINT We are offering an Eos EOSINT plastic laser sintering system for sale. The EOS P380 system includes the following components: Build chamber container Powder container Overflow container 3DM 8-zone process chamber heater, 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin Build volume: 350mm x 350mm x 610mm Dusdpfx Aogqux Nsfpen Power supply: 3/N/PE/400V AC Frequency: 50 Hz Connected load: 8 kW Fuse protection: 32 A Maximum laser power: 100 W Laser class (open): 4 Laser class (closed): 1 Weight: 850 kg Model: EOSINT P 380 Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Professional granulator from the German brand Dreher – model S 26/26 GFS-SPEZIAL. This unit is designed for shredding plastics from injection molding or extrusion processes. Robust construction, proven VEM 7.5 kW motor, three-phase 400 V power supply. The machine features a large feed hopper, convenient service access, and an electrical control cabinet with emergency stop button. The installed low-speed three-phase motor ensures high shredding power with stable operation. • Motor power: 7.5 kW • Power supply: 400 V 50 Hz • Speed: 1500 rpm • Throughput suitable for medium and large injection moulding machines Dujdpfovyumyex Afpen • German manufacturing quality • Sturdy frame and knife assembly Very good condition, mechanically inspected, ready for operation.

Condition: good (used), Plastic crates, reusable containers Transport box, storage container, order picking box Duedpjpvi Ufofx Afpon Colour: Blue With interlocking lid Dimensions: approx. L 600 x W 400 x H 353 mm 9226ä Approx. 1,000 units available!

Condition: ready for operation (used), Year of construction: 2012, Brand: DIXI Model: 60 Sh Year of manufacture: 2012 Pressing force: 60 t Voltage: 400 V Maximum bale weight: 340–500 kg Bale dimensions: approx. 120 x 80 x 80–110 cm Machine weight: 2,400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Filling opening dimensions: 115 cm wide x 80 cm deep x 55 cm high Condition: Very good! Functionality checked. FLITS Rental & Sales service: With every machine, we supply a bundle of binding wire (120 wires). Need more bundles? Request a non-binding quote. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machines for both businesses and private customers. We focus on providing efficient solutions in the areas of internal transport, cleaning, waste processing, and working at height. At FLITS Rental & Sales you will find a comprehensive range of machines suitable for use in various sectors. See our other listings for: waste balers for efficient waste processing, electric pallet trucks/stackers for fast and safe internal transport, scrubber dryers for thorough and professional floor cleaning, forklifts in various models suitable for all types of work environments. With FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure that you have the right machine quickly. Visit our location You are welcome to view the machines at our premises. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Djdpfx Afjyh Dqxspeun Visits are possible by appointment so we can take the time to provide comprehensive information and show you the right machines. Contact Do you have any questions or would you like to receive a non-binding quote? Please do not hesitate to contact us: We are happy to assist you. Waste baler | Paper baler | Cardboard baler | Plastic baler | Waste compactor | Recycling | Textile baler | Waste | Waste processing | DIXI

Condition: good (used), Included in the scope of delivery: 01x open front storage bin, used Manufacturer: Bito External dimensions: 600 x 400 x 170 mm Dedpfxew E D Iie Afpoun Internal dimensions: 560 x 360 x 167 mm Opening dimension: front half-side open, 275 x 82 mm (W x H) Handle: yes, one-sided, open Colour: blue Weight per unit: 1.59 kg General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra charges, which can be requested from us depending on the delivery location and delivery scope.

Condition: good (used), Scope of delivery includes: 01x stacking box, used External dimensions: 400 x 300 x 120 mm Internal dimensions: 360 x 260 x 117 mm Colour: similar to anthracite grey Weight: 0.62 kg per unit Notes: The material is food-safe and made of polypropylene (PP). General information about the item: This item is only offered for collection. Delivery or shipment of this item will incur additional costs, which can be quoted separately depending on the place of delivery and the scope of delivery. Djdjw E Ixrepfx Afpoun

Condition: excellent (used), Year of construction: 2008, Seydelmann K40 Bowl cutter Dujdpsqakm Iefx Afpon 2008, Stainless bowl cutter, three blade assembly, variable speed, timer and temperature controls, 3Ph

Condition: excellent (used), Automatic molding for plates and/or salad bowls with drying tank and complete with various accessories. Brand: JOB FORNI Dusdev Upkcepfx Afpen

Condition: used, year of last overhaul: 2018, - Dimensions LxWxH: 880x1750x2010 mm - Dough capacity: 160 kg - Flour capacity: 100 kg - Bowl capacity: 266 L - With bowl lifter - Year: 12/2018 - Serial number: 185306 - Electronic control - 2 speeds - Bowl reverse function - Power: 12.75 kW - Voltage: 400 V - PCE panel (20 recipes) Duodpfx Afjx Hgbnepen - Drain plug - Stainless steel bowl cover with hatch - Bypass selector for emergency operation MAG-R PRO mixers stand out for their versatility and ease of use. They are suitable for all types of dough (hydrated dough from 55% and above).

Condition: used, functionality: fully functional, Plastic Granulation Line + for Spare Parts The line includes: -Extruder: CINCINNATI MILACRON CM65HP, year of manufacture 1996 -Granulating head -Granulate cooling system -Cyclone: GAMART -Raw material pneumatic conveying system ADDITIONAL EQUIPMENT -Single-screw co-extruders – total of 9 units -Raw material transport: -Pneumatic (powders, granules) -Mechanical (screw conveyors, 2x chain-type redler conveyors) -2 x trough mills – for grinding PVC profiles Technical condition: equipment is fully operational, currently in use in production Applications: -Plastic granulation (PVC, other types) -Co-extrusion Dsdpfsyda Egsx Afpeun Documentation and photos available upon request.