Used Plastic Bowls for sale (7,103)

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D Gbsdeznz Ezjpfx Aatot • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Year of construction: 2025, condition: new, The Zig-Zag Air Separator by Koltex Plastic Recycling Systems enables efficient separation of bulk materials into fractions with different densities. The material to be separated is fed into the device via a rotary valve, ensuring even distribution across the entire cross-section of the separation channel. Sorting is carried out using an upward airflow generated by a high-performance blower. The air flows through the separator channel, lifting lighter particles while heavier fractions fall downward due to gravity. The specially designed Zig-Zag channel forces the material to pass through the airflow multiple times at each turn. Lighter fractions are effectively lifted and discharged through the top airflow, while heavier particles remain and fall, ensuring precise and efficient separation. Gedpfx Aevmxvfeatobt The separator is equipped with advanced dust extraction cyclones with filters that eliminate dust emissions throughout the process. This ensures not only high separation efficiency but also environmental safety and workplace cleanliness. Koltex Plastic Recycling Systems also offers high-quality shredders, which can be integrated at the start of the process to create a complete grinding line with the separator. This solution enables comprehensive material processing, from shredding to precise separation, providing full control over the recycling process.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: MST-0800C0028, For sale: automatic plastic injection molding machine ATEC HQ-800QL. Year of manufacture – 2005 (04), Serial No. MST-0800C0028. Hydraulic system with digital control panel, suitable for serial production of plastic parts. Power supply 380 V, 50 Hz, 3 phases. Used, fully equipped, previously operated in production. Suitable for manufacturing technical, packaging, and industrial plastic components. Inspection on site possible. Gbodpfex Nhy Rjx Aatet

Year of construction: 2000, operating hours: 811 h, condition: used, functionality: fully functional, machine/vehicle number: 292, IDE Co-extruder MEB 38/2 - Motor: 5.2 kW / Max. screw speed: 42 rpm - Screw diameter: 38 mm Gjdpfezmnp Rsx Aatsbt - Screw length: 25D - Smooth, single-piece barrel - 4 barrel heating zones - 1 flange heating zone - 1 die heating zone - KS 40 controller - 3-zone screw - Die connection: IDE M48x2 - Melt pressure and melt temperature measurement - Height-adjustable - Tilt-adjustable - Barrel and screw in very good condition - First-hand ownership, very well maintained, only 811 operating hours, used only in a technical center.

Year of construction: 1998, operating hours: 1,776 h, condition: used, functionality: fully functional, machine/vehicle number: 37, - Motor 35 kW / Maximum screw speed 72 rpm - 2-part, smooth cylinder - 5 cylinder heating zones - 1 flange heating zone - 2 tool heating zones Gsdpszmurrofx Aatebt - KS 40 controller - Measurement of melt pressure and melt temperature - 3-zone screw - Tool connection IDE M100x3 - From a single owner, in very good condition, only 1,776 operating hours, used solely in a pilot plant.

Condition: good (used), Year of construction: 2001, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 132, spindle speed (min.): 2,700 rpm, table height: 1,800 mm, table diameter: 800 mm, table width: 800 mm, table length: 200 mm, Profile saw for extrusion. Synchronized with profile speed and cuts… repeated cuts! Ejection… piece counter. Gbodpfx Aozw U Tqsatot

Condition: excellent (used), Year of construction: 2004, operating hours: 76,085 h, functionality: fully functional, machine/vehicle number: 196531, clamping force: 500 kN, screw diameter: 25 mm, clearance between the columns: 320 mm, displacement volume: 49 cm³, injection pressure: 2,240 bar, injection weight: 45 g, mold height (min.): 200 mm, ejector stroke: 125 mm, opening stroke: 350 mm, overall weight: 2,300 kg, heating capacity: 4.9 kW (6.66 HP), pump power: 15 W, power: 19.9 kW (27.06 HP), Year of manufacture: 2004 Clamping force: 50 tons Distance between columns: 320 x 320 mm Screw diameter: 25 mm Injection volume: 49 ccm Injection weight: 45 g for PS Equipment: 2 x core pull, handling interface, interfaces for hot runner systems Fully inspected! Gbedpex Rq Rnsfx Aatjt PRICE REDUCED FROM 7000 TO 5950 EUR!!!

Condition: excellent (used), Year of construction: 2021, operating hours: 240 h, functionality: fully functional, operating pressure: 6 bar, We used the machine for PVC tarpaulins. The company is closing down. Technical details can be found in the photo. It has been running without issues, and no maintenance has been required to date, although this can certainly be clarified with the manufacturer in Italy. The machine functions perfectly; there is no overheating. A video call is possible. Three electrodes are included: Gbjdpszy E D Eofx Aatet one fixed electrode, 100 cm x 20 cm one fixed electrode, 50 cm x 2 cm one flexible electrode, 100 cm x 2 cm 400 L/minute 200/300 L of air Working pressure: 6 bar, max. 8 bar.

Condition: used, Year of construction: 2012, Centramec Oktabinwender Mk2 — Technical Data Manufacturer: Centramec AB Model: Oktabinwender Mk2 (Octabin Turner/Tipper Mk2) Document ref.: H-KU 0032g(DE), Rev. E.K., dated 2012-11-05 Pallet / Octabin capacity: Pallet size: container pallet 1140 x 1140 x 160 mm, four-way pallet Octabin min. height (incl. pallet): 1390 mm Octabin max. height (incl. pallet): 2590 mm Max. weight (incl. pallet): 1200 kg Electrical connection: Supply: 400 V AC, 6 A Protection class: IP55 Terminals: L1, L2, L3 Pneumatic connection: Pressure: 6 bar Connection size: 8–12 mm Air consumption: approx. 20 l/stroke Dimensions (stand): Height: 3592 mm Width: 1906 mm Depth: 2554 mm Weight: Stand weight: approx. 2300 kg Noise level: Below 70 dB(A) Installation / space requirement: Height: 3500 mm Godpfxjzz N U Rs Aatobt Width: 4000 mm Depth: 3000 mm Fixing: 4x4 M16 expander bolts, length 100 mm, machine must be anchored level to the floor Handling features: Control console with rotate and lift functions, plus stop button Lifting eyes and fork support for forklift/crane transport Pallet lock engages during rotation, holds pallet until turner rotates back 180° rotation of hood + octabin around a turning disc

Condition: used, functionality: fully functional, Used dough bowls, 3 pieces Gsdpfszzcn Djx Aatjbt

Condition: not inspected (used), Year of construction: 2001, operating hours: 1,08,293 h, functionality: unexamined, machine/vehicle number: 45069, total length: 9,000 mm, total width: 2,300 mm, total height: 2,500 mm, overall weight: 33,500 kg, Handling costs are included in the price. Automation is not included in the system. Gedpfx Aaozrd Tpjtebt For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. The machine has not been inspected but was operational until the end.

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection Unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 679 ccm Clamping Unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system for hot runner zones x 10 Hardened injection unit – bimetallic Energy-efficient machine – features a system with 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 Robot Year of manufacture: 2019 4-axis robot: 3 axes driven by servo motors (electric); axis C – pneumatic Touch control panel Safety package for robot Robot with interface, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started up by our service technicians before sale. Gbsdpfxozy In Ho Aatst It is possible to receive a video of the technical tests for the selected machine, or to participate in live technical demonstrations at our premises in Łódź. Price: Upon request

Condition: good (used), Year of construction: 2013, functionality: fully functional, total height: 4,000 mm, load capacity: 600 kg, construction height: 4,000 mm, total width: 1,200 mm, total length: 800 mm, input voltage: 400 V, Meyma HK 602 VL bowl lift / tipper, built in 2013, with a total height of approx. 400 cm, currently configured for Diosna bowls 120a and 160a with "fork- / eye mount", dumping height currently set to approx. 200 to 250 cm, including monitoring of the safety zone without protective grilles, manual operation, including documentation (manual / inspection log), was still in operation until the end of March. Ready for loading in D-59192 Bergkamen. (A matching forklift truck is available for tipping and loading.) Technical specifications: approx. 120 cm wide, approx. 80 cm deep and approx. 400 cm high, weight: approx. 1,250 kg Electrical connection: 380 / 400 V, 16 A CEE plug Godpfx Aoy Sb Sfoatsbt Price in "bakery condition" ex warehouse: € 12,500 net

Condition: used, Year of construction: 2001, machine/vehicle number: 21012101, functionality: fully functional, operating hours: 49,849 h, input voltage: 415 V, input current: 36 A, input frequency: 50 Hz, type of input current: AC, workpiece length (max.): 2,250 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 1,000 mm, workpiece weight (max.): 420 kg, number of axes: 5, number of slots in tool magazine: 10, controller manufacturer: Siemens, actuation type: electric, total height: 4,000 mm, total length: 7,300 mm, total width: 7,000 mm, table length: 2,250 mm, table width: 1,500 mm, control voltage: 24 V, 5-axis CNC machining center for wood or plastic. The machine was used for contour milling of plastic components. It is equipped with an HSD spindle, and the tool holder is of the HSK63 type. The machine can be purchased with or without an extraction system, depending on the intended application. The dimensions specified for the machine include the extraction system. Gbsdpfxozhtpfo Aatet An inspection of the machine is possible at any time; it is currently still in production.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 4608 1999, power: 5.6 kW (7.61 HP), volume flow: 200 m³/h, Desiccant air dryer Manufacturer: Motan Type: ADC 200/10/20 Connection value: 5.6 kW Dry air volume: 200 m3/h 5 material silos Manufacturer: Motan Type: BC-30 Ltr. Additional heating: 1.55 kW Gjdpfsyvfibjx Aatsbt 5 material conveying units Manufacturer: Motan Type: HLS-06-1-A000-0 PRICE REDUCTION FROM 5500 TO 5000 EUR!!!

Condition: new, Year of construction: 2024, functionality: fully functional, COMPLETE PLASTIC GRANULATION LINES We offer technologically advanced complete plastic granulation lines designed to meet customer needs. Koltex PRS is a Polish manufacturer of high quality machinery and equipment for the various stages of waste recycling: PP,PE,LDPE,LLDPE,PS,ABS,HDPE. We provide comprehensive solutions and support for machine configuration. The innovative technologies of our recycling systems guarantee the highest degree of user-friendliness and equipment efficiency. We offer all the machines needed to configure a complete plastic recycling line. The XR 8 granulation line is the latest model from Koltex Plastic Recycling Systems in the field of LDPE film processing. In addition to the well-known technological solutions used in standard extruders, a number of changes have been made to achieve high production rates while improving the quality of the regranulate achieved. The new system is characterized by low energy consumption and significantly simplified operation thanks to the new SMART software. Numerous modifications have reduced the machine footprint by 30% compared to the previous model, but also increased productivity by 45% while reducing energy requirements by around 15%. An intelligent temperature control system for the plastic in the Agglomerator and an automatic material dosing system ensure process stability. Thanks to the automation of the process, operator involvement has been reduced to a minimum. Our offer also includes: Complete systems for plastics recycling Mills Plastification systems, vibrating screens, centrifuges Screen changers Peripheral equipment Washing lines (DWFS®) Dynamic washing machines Drying separators Gjdsuqmavspfx Aatobt Granulation and extrusion lines Service and spare parts You can find out more about our range of products in this area at our website

Year of construction: 2026, condition: new, functionality: fully functional, The PR8 pre-washer is designed for intensive pre-washing of plastic waste in recycling lines. The machine removes sand, soil, and mechanical contaminants, preparing material for further washing stages. Suitable for continuous 24/7 industrial operation. Materials: PE, PP, HDPE, LDPE, plastic films, post-production waste Gbedpfx Aaeyh Hr Estjt Technical data: Capacity: up to 2000 kg/h Drive power: 30 kW Rotor length: 3000 mm Rotor diameter: 680 mm Dimensions (L x W x H): 3689 x 1766 x 3294 mm Inlet opening: 500 x 450 mm Features: Heavy-duty industrial construction Replaceable wear parts Easy service access Ready for integration into complete washing or recycling lines 📩 Available in customized configurations. Contact us for details.

Condition: excellent (used), Year of construction: 2013, 3Engel Victory30H/80V/160 combi Ecodrive / Production line with Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of manufacture: 2013 Injection unit: Screw diameter: 30 mm Shot weight: approx. 100 g Injection pressure: 2385 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 160 t Tie bar distance: 0x0 mm Size of clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: 2-component injection molding machine with rotary table and robot Gedpfx Aezy Iqneatjbt Tie-bar-less machine, hybrid: energy-saving, high-speed, and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total operating hours: 24,312 h Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 5 Control system with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motors controlled with inverter Proportional valves on injection units - precise injection Screw diameter in the vertical injection unit: ⌀22 mm - approx. 28 g/shot There is the option to purchase a rotary table Robot Sepro SR S5-25 S3 Trans Year of manufacture: 2013 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel ranges in axes approx.: X-2000, Y-1000, Z-1500 Automatic axis lubrication Touch control panel Safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions: Weight: 8700 kg Length/Width/Height: 5.35x1.76x3.42 m All machines offered will be started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 1995, functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 315 mm, feed length Z-axis: 175 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 495 mm, feed rate X-axis: 9 m/min, feed rate Y-axis: 9 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 9,000 rpm, spindle speed (min.): 50 rpm, quill travel distance: 175 mm, rapid traverse X-axis: 9 m/min, rapid traverse Y-axis: 9 m/min, rapid traverse Z-axis: 4 m/min, total width: 2,480 mm, total length: 1,620 mm, table width: 1,230 mm, table length: 410 mm, position of the milling head: vertikal, type of input current: AC, rotational speed (max.): 9,000 rpm, rotational speed (min.): 50 rpm, overall weight: 3,200 kg, input voltage: 400 V, workpiece weight (max.): 250 kg, space requirement width: 2,500 mm, space requirement length: 2,500 mm, space requirement height: 2,450 mm, input current: 25 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Due to restructuring measures, we are selling our CNC milling machine – Fehlmann Picomax 80 CNC 2/3 - robust Swiss precision machine - year of manufacture 1995 Gsdjzzd Hhopfx Aatsbt - low operating hours - very good condition considering its age - Heidenhain 315B control system - 4 axes (X, Y, Z + A [rotary axis]) - axes can be moved in parallel - travel distances X700 x Y315 x Z170 (+W495) mm - table 1,320 x 410 mm - 4th axis (rotary axis) AT100 original Fehlmann with 140mm three-jaw chuck and collet chuck - manual control panel - spindle 50 – 9,000 rpm - complete steel sheet enclosure with safety glass - fully functional - complete operating and programming manual - spare parts and service available from Fehlmann - machine can be inspected while powered on Depending on the price, a wired measuring probe (Renishaw), an electric fine milling and grinding spindle from RAY (Switzerland) 10,000 - 40,000 rpm, and various tool holders can be included. This offer is subject to change. Subject to prior sale. No online sales. The sale is only to commercial customers after inspection and acceptance on site. Due to the age of the machine, the sale is made with the exclusion of any warranty. Pick-up only (EXW) - no shipping.

Condition: not inspected (used), Year of construction: 1998, operating hours: 1,30,240 h, functionality: unexamined, machine/vehicle number: 34477, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, includes handling linear robot A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end. Gbodpfozrd Aqox Aatjt

Condition: used, Year of construction: 2007, functionality: fully functional, SE-HSM-40/26-COMPACT-PLUS Horizontal four-head welding machine 2MC Horizontal CNC corner edging machine, motion control WST-30 Horizontal turning station Gbedpfszm N Nrjx Aatet Minimum element size 320 × 320 mm Maximum element size 4,000 × 2,600 mm Maximum element weight 80 kg Minimum working area 320 × 320 mm Maximum working area 4,000 × 2,600 mm

Condition: used, Year of construction: 2015, Cutting and machining center, FTB 100 A2 2S3 NFZ Feed direction from right to left Windows 10 min. cutting length (PVC only): 296 mm min. part length (PVC with steel): 300 mm max. part length (PVC with steel): 4,000 mm max. profile depth: 130 mm max. profile height: 130 mm Gedpfx Aozm Hr Rsatobt Automatic feeder magazine for manual loading, for 12 profiles with a min. length of 600 mm and a max. length of 6,500 mm: 8 axes - CNC - machining station A2 - 3 CNC axes X, Y, Z - one 2-way spindle each, 0.75 kW 2 S 3 – Sawing station - 1x stepless swivel range of the saw from 45° - 135° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm - 1x saw 45° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools Cross conveyor with buffer function CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools TFT screen for steel length display - 12" TFT screen for displaying the steel lengths for manual steel insertion and insertion depth. Label thermal printer PF4i with LAN - with network connection for manual application of labels Laser e-SolarMark 30W - CO2 laser, 30 W power - 230V 50Hz / 115V 60Hz, 1PH, 700W ASE 100 S steel cutting and insertion - with feeder magazine with 12 slots Control panel steel profile loading ASE 100 - 15-inch TFT display touchscreen Double screw unit from above and below - automatic distance adjustment between the two screw units, motorized, screw spacing: min 155 mm / max. 500 mm Double dowel hole drilling station Ø 6mm and Ø 10 mm - with automatic adjustment to different profile types with 8 lateral positioning points 3-axis - CNC - machining station S, type L - one 3-axis tool carrier (twin module) for up to 18 machining units, equipped on both sides One locking component insertion station for a standard locking component for frame profiles - with vibrating hopper, bunker and locking component singulation - positioning for attaching the locking components Locking component insertion station via bar magazine - One locking component insertion station for a locking component for frame profiles and mullions/transoms, on one side. 2x screw unit for locking component inserter - automatic single screw unit for locking component insertion stations, positionable in the y-axis Cross conveyor magazine - for transporting the profiles for stacking Stacking and sorting unit, 3 axes - one stacking and sorting unit in a 3-axis design Carriage change station - one carriage change station for positioning two carrier carriages in the profile stacking position. Plant capacity: approx. 270 frame units in 7.5 hours with 85% availability approx. 130 mullions, posts, uprights with the following machining operations: Frame approx. 1200 x 1200 mm: 4 x cutting 2 drainage slots, rebate bottom 2 drainage slots outside/bottom 2 ventilation slots, rebate top Screws 4x/part 6-8 x standard locking component insertion for window 8 x sealing groove milling 2-3 x dowel holes vertical bars for window

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 208-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 52 mm Shot weight: 502 g Injection pressure: 1893 bar Dosing volume: 552 ccm Clamping unit: Clamping force: 208 t Tie bar spacing: 530x530 mm Platen size: 790x765 mm Ejector: electric Clamping unit: toggle Control system: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Gsdpfx Aszy Iztjatjbt Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine has been serviced in Germany Samfacc robot Year of manufacture: 2022 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt available at an additional cost Dimensions: Weight: 6800 kg Length/Width/Height: 6.10x1.50x2.00 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 88-MK6 with Sepro Industrial Robot Succes 7 / Hybrid Machine Year of manufacture: 2021 Injection unit: Screw diameter: 41 mm Shot weight: 246 g Injection pressure: 1890 bar Dosing volume: 271 ccm Clamping unit: Clamping force: 128 t Tie bar spacing: 410x410 mm Platen size: 620x605 mm Ejector: electric Clamping unit: toggle Control: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor with inverter drive - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Robot Samfacc Year of manufacture: 2022 Gbodpfx Aszy Iaieatet 4-axis robot: 3 axes are driven with servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 4000 kg Length/Width/Height: 4.90x1.30x1.80 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, laser source model: HF, laser power: 80 W, table length: 1,000 mm, table width: 600 mm, workpiece height (max.): 230 mm, resolution (max.): 1,000 dpi, No minimum price – guaranteed sale to the highest bidder! Suitable for professional engraving and cutting of various materials such as wood, acrylic, glass, plastic, and metal! TECHNICAL DETAILS Laser power: 80 W Laser source: Synrad HF-CO₂ laser source Table size/working area: 1,000 x 600 mm Maximum workpiece height: 230 mm Gedpfxszx Dz Ho Aatjbt Maximum resolution: 1,000 dpi Maximum cutting speed: 3,200 mm/s MACHINE DETAILS Power supply: 230 V Dimensions & Weight Machine dimensions (L x W x H): 1,480 x 900 x 1,120 mm Machine weight: 300 kg EQUIPMENT Microsonic autofocus sensor for automatic distance detection and precise focusing LED interior lighting Rotary engraving device for cylindrical workpieces External extraction system Durable Synrad CO₂ laser source