Used Plum for sale (119)

Condition: used, Year of construction: 1975, turning diameter over bed 380 mm turning diameter over slide rest 215 mm turning length 1250 mm spindle bore 41 mm bed width 340 mm number of spindle speeds 12 spindle turning speed range 14-2800 U/min total power requirement 6 kW Cpjdpfx Aeycxf Aofpeu weight of the machine ca. 1,85 t dimensions of the machine ca. 3 x 1 x 1,35 m Special price sale directly from the factory! Machine dealer with own stock of 1600 m².

Condition: used, length 1200 mm width 500 mm Codpjtq I Rqofx Afpopu floor-plate height 105 mm weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Rectifier required. 110 volts, 2.86 amps. Reduced special price. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 1981, roll diameter 315 mm Cpodpfxsyatycj Afpju throat 295 mm workpiece height 190 mm Motor Capacity 0,37/0,8 kW table-size 470 x 450 mm saw band length 2220 mm cutting speeds 450 + 900 m/min weight of the machine ca. 110 kg dimensions of the machine ca. 640 x 510 x 1600 mm

Condition: ready for operation (used), Year of construction: 2010, x-travel 10000 mm y-travel 1500 mm z-travel 1000 mm passage 1300 mm passage width 1500 mm control Siemens Sinumerik 840 D turning speeds 2 Stufen: 6000 U/min Number of working hours 54821 h tool taper SK 50 Boring power 120 mm thread capacity M 55 toolpiece magazine: chain magazine 30 Stück rapid traverse X-axis 36000 m/min rapid motion Y-axis 30000 m/min rapid traverse Z-axis 30000 m/min total power requirement 36 kW dimensions of the machine ca. 12 x 11 m Gantry-style milling machine with movable portal bridge and stationary clamping table. Features: • Clamping table designed with transverse clamping beams spaced 750 mm ndard panel panels are not included. Panel panels must be purchased separately if required. • Hydraulic clamping device with clamping bridges for axis machining, includinghydraulic system • Angle drilling and milling head, n = 4000 rpm SK50 • High accuracy and stability thanks to Hirth gearing • Automatic tool change in the angle head • RWP20.50-M touch probe • Pendulum operation • Safety fence with light curtains, Sick brand • Clamping table with 750 mm transverse clamping beams • 30-position tool chain magazine on the gantry frame • Machine cooling system • Integrated water-to-air heat exchanger in the control cabinet • Unisign remote diagnostics for Siemens Sinumerik 840 D • Makrolon curtains on both sides of the gantry bridge motorized height adjustment • Partition wall with viewing window • Chip conveyor with hinged belt design • Mounting and alignment elements Cpedpfx Asx S Rx Iefpsu • Documentation Accessories: 1 spare SK50 angle drill and milling head 1 spare Hexagon RWP 20.50-M touch probe 1 2500 x 1200 mm T-slot clamping frame, which can be installed on the machineinstead of the hydraulic device. Various spare parts

Condition: good (used), Year of construction: 2014, x-travel 730 mm y-travel 730 mm z-travel 880 mm size of pallet 2 x: 500 x 500 mm spindle speed: 12000 tool taper SK 40 distance spindle center to table 80 - 810 mm milling spindle drive 30 kW max. torque max. 102 Nm max. workpiece weight 500 kg max. workpiece diameter on pallets 800 mm max. workpiece height H = 1100 mm change time of pallets 9,5 sec Max. speed ot the feeder 60000 mm/min rapid traverse 60 m/min tool changer number of tools 40 max. tool diameter 110 mm max. tool-dia with free toolbox 320 mm max. tool weight 30 kg change-time chip to chip 4,4 - 10 sec change-time tool to tool 1,95 sec Number of working hours 15894 h total power requirement 46 KVA weight of the machine ca. 15 t required space 5,5 x 3 x 2,8 m Well-preserved horizontal machining center DMG-Mori, Mod. NHX 5000, built in 2014 with Siemens 840D CNC control with two pallets and 40-way tool changer. Read operating hours 23262, spindle hours 15894 Other data: Distance spindle nose - table center 70 - 950 mm Pallet indexing time 1.3 sec Indexing of the B axis (table) 360 x 1 degree Cpsdpfx Afsv Htitjpju Jog feed rate 0 - 5000 mm/min Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 2005, x-travel 400 mm y-travel 450 mm Cedpsxfb E Aofx Afpspu z-travel 350 mm Control Heidenhein iTNC 530 68 fach tool adaptor HSK 40E turning speeds 30.000 U/min fixed table - dimensions 300 x 400 mm mm workpiece weight 200 kg pallet table size 320 x 320 mm feed speeds autom. x/y/z 40 m/min. spindle drive motor 13 kW Number of working hours 32369 h total power requirement 16 kW weight of the machine ca. 7.500 kg High-speed 3-axis universal machining center with 7-station pallet changer. Operating hours: 44,899 hours. Load hours: 32,369 hours. Spindle time since replacement: 13,350 hours. Gantry-style machine with a solid monoblock polymer concrete construction, compact linear ball bearings, Heidenhain direct measuring system, hydraulic power unit for tool and pallet clamping, and digital drives with liquid-cooled Siemens AC servo motors. Accessories: 1 BURN refrigeration unit, 1 Keller L-Cut extraction system (built in 2012), PS 32 setup button, and tool blow-off device. Machine dealer with own stock of 1600 m².

Condition: used, Approx. 7 m double-walled chimney / flue made of stainless steel with floor console (insulated with approx. 25 mm mineral wool) incl. all clamping straps and hood. The system was only in operation for approx. 1.5 years. Csdpfx Ajru Hn Rofpspu Diameter (inside): approx. 400 mm, Diameter (outside): approx. 470 mm, Length (: approx. 7 m, Insulation: 25 mm mineral wool

Year of construction: 2026, condition: new, The machine is suitable for stoning of stone fruit. The chopped fruit can be delivered to a container, a pasteurizer, a jam extractor, suitable for use with a screw pump or collector handle with manual force. - quick sieve change - low upkeep - perfect for mash seed removing Specifications: - Performance: 500-1000 kg/h - Electric demand: 2,2 kW, 400 V, 6 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 650x1100x1140 mm - Weight: 100 kg - IP65 certified electronics - Input height: 1050 mm Cjdpfx Aod Aqy Refpopu - Output height: 380 mm - Food industrial rotor rubbers - Adjustable distance between the sieve and rotors - With feed screw in the input hopper. With 2pcs rotating, 2pcs fix wheels, or 4 pcs vibration-free feet. It requires minimal maintenance. Sieves can be changed easily and quickly. One choosable diameter sieve is inclusive in the list price Available options: - DN 65 connection for the outlet - Inverter: speed control for the rotor - Sieves: - 0,8 mm diameter sieve: berries, pulps - 1,5 mm diameter sieve: berries, pulps - 3 mm diameter sieve: apple, pear mash - 5 mm diameter sieve: cherry - 8 mm diameter sieve: plum, apricots - 10 mm diameter sieve: peach, mango - Custom diameter sieve

Year of construction: 2026, condition: new, The machine is suitable for the stoning of stone fruit. The chopped fruit can be delivered to a container, a pasteurizer, a jam extractor, suitable for use with a screw pump or collector handle with manual force. - quick sieve change - low upkeep - perfect for mash seed removing Specifications: - Performance: 1-5000 kg/h - Electric demand: 11 kW, 400 V, 6 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 1450x1650x1860 mm - Weight: 500 kg - IP65 certified electronics - Input height: 1750 mm - Output height: 300 mm - Food industrial rotor rubbers - Input and output connections: DN65 - Built-in inverter: speed control for the rotors -Adjustable distance between the sieve and rotors - Inspection window The machine has two work area. In the first, it does the destoning, in the second the pulping. With feed screw in the input hopper. With 4 pcs vibration-free feet. It requires minimal maintenance. Sieves can be changed easily and quickly. Two choosable diameter sieve is inclusive in the list price Available options: - Sieves: Cpodsd Aqzdopfx Afpeu - 0,8 mm diameter sieve: berries, pulps - 1,5 mm diameter sieve: berries, pulps - 3 mm diameter sieve: apple, pear mash - 5 mm diameter sieve: cherry - 8 mm diameter sieve: plum, apricots - 10 mm diameter sieve: peach, mango - Custom diameter sieve

Year of construction: 2026, condition: new, The machine is suitable for stoning of stone fruit. The chopped fruit can be delivered to a container, a pasteurizer, a jam extractor, suitable for use with a screw pump or collector handle with manual force. Specifications: - Performance: 1-5000 kg/h - Electric demands: 5,5 kW, 400 V, 16 A, monophase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 860x1820x1350 mm - Weight: 190 kg - IP65 certified electronics - Tiltable work surface, adjustable height Easy to clean, with massive food industrial conveyor belt, steplessly adjustable speed in both ways, with 2pcs rotating, 2pcs fix wheels. It requires minimal maintenance. Available options: Ribbed texture belt: it helps to prevent the fruits rolling down in case of working on an angled surface. With feed screw in the input hopper. With 2 pcs rotating, 2 pcs fix wheels, or 4 pcs vibration-free feet. It requires minimal maintenance. Sieves can be changed easily and quickly. One choosable diameter sieve is inclusive in the list price Available options: - Inverter: speed control for the rotor Sieves: - 0,8 mm diameter sieve: berries, pulps - 1,5 mm diameter sieve: berries, pulps - 3 mm diameter sieve: apple, pear mash - 5 mm diameter sieve: cherry - 8 mm diameter sieve: plum, apricots Cpjdjfd Iixopfx Afpju - 10 mm diameter sieve: peach, mango - Custom diameter sieve

Year of construction: 2026, condition: new, Condensation drying of air and indirectly of foodstuffs (fruit, tea, mushrooms and such) is the most energy saving way of removing water from different materials. It works on the heat pump principle- by cooling on a steamer temperature below dew point is reached, due to which the surface of the steamer becomes wet with moisture from the air. The heat extracted from the air goes immediately back to the same air, with the help of electric energy needed for the operation of the compressor, 20-30% more heat is generated. - suitable for drying various fruits (apple, plum, peach, etc.) Cedpfsd Atipsx Afpepu - adjustable temperature and humidity control - automatic ventilation - with stainless steel shelves Specifications: - Performance: 25-50 kg/cycle - Electric demands: 0,6 kW, 230 V - Drying temperature: 40-60°C - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 710x800x2000 mm - Weight: 100 kg - Number of trays: 11pcs - Dimensions of trays: 570x570 mm - Drying surface: ~3,6 m2 - IP65 certified electronics - Continuous ventilation, consistent heat - Insulation: 70 mm polyurethane - Closed condensation circle, condensate drain Suitable for fruits, vegetables, herbs, spices, pastes, mushrooms. Very easy to clean. Requires minimal maintenance.

Year of construction: 2026, condition: new, Condensation drying of air and indirectly of foodstuffs (fruit, tea, mushrooms and such) is the most energy-saving way of removing water from different materials. It works on the heat pump principle- by cooling on a steamer temperature below the dew point is reached, due to which the surface of the steamer becomes wet with moisture from the air. The heat extracted from the air goes immediately back to the same air, with the help of electric energy needed for the operation of the compressor, 20-30% more heat is generated. - suitable for drying various fruits (apple, plum, peach, etc.) - adjustable temperature and humidity control - automatic ventilation - with stainless steel shelves Specifications: - Performance: 50-100 kg/cycle - Electric demands: 1,2 kW, 230 V - Drying temperature: 40-60°C - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 1420x800x2000 mm - Weight: 200 kg - Number of trays: 22 pcs - Dimensions of trays: 570x570 mm - Drying surface: ~7,2 m2 - IP65 certified electronics - Continuous ventilation, consistent heat - Insulation: 70 mm polyurethane - Closed condensation circle, condensate drain Suitable for fruits, vegetables, herbs, spices, pastes, mushrooms. Very easy to clean. It requires minimal maintenance. Codpfxod Atghe Afpopu

Condition: ready for operation (used), Year of construction: 1984, sheet width 3040 mm plate thickness 4 mm distance between columns 3040 mm stroke of upper beam 200 mm adjustment of lower and bend clamping 100 mm total power requirement 6,4/3 kW weight of the machine ca. 6,3 t Cpedsxwzbbspfx Afpju dimensions of the machine ca. 4,3 x 1,2 x 1,8 m Motorized folding machine with double-sided bending beam drive, lower, upper and bending beam adjustable, drive motors as brake motors - slip clutches as overload protection, bending angle adjustment via potentiometer, individual switching for each work step by hand switch, SEGMENTED TOP RAIL 120 mm height (Photo 7).Please notice that such a machine now costs about €70.000,--. As usual, the sheet thickness is based on a strength of 40 kg / mm². Machine dealer with own stock of 2500 m².

Condition: new, Knife grinder Motor: 2.2 kW / 2800 rpm, 220V, Capacity: 400-800 kg/h for fruit, 40-200 kg/h for dry material Screens: 4 pieces, according to request. Purpose of the machine: Pre-chopping and grinding. Suitable for grinding the following products: - Grains: wheat, corn, peas, pepper, caraway. - Pressed seeds: sunflower cake, soybean meal, pumpkin seed cake, linseed cake, poppy seed cake, etc. - Raw fruits and vegetables: pepper, plum, apricot, apple, quince, pear. - Dried fruits and vegetables: pepper, onion, garlic, raspberry, blackberry, apple, sour cherry, etc. Main components of the machine: - Frame - Safety switch - Motor 380V or 220V - Housing Csdpfxoxvxbcs Afpspu - Hopper - Sieve - Knives - Dosing regulator Available in stainless steel version.

Year of construction: 2025, condition: new, Creamer, pulper, peanut butter maker machine (Stone mill creamer, pulper) The cream or butter produced has such a fine particle size that it flows out of the machine like oil, with no perceptible coarse particles. Machine function: Cream preparation, pumpkin seed grinding, coconut grinding. Suitable for creaming or pulping the following products: Oilseeds: - Peanuts, hazelnuts, almonds, walnuts, cashews - Pistachios, sunflower seeds, pumpkin seeds, hemp seeds, coconut - Soy milk (tofu), chickpeas (hummus) Water must be added when processing soy milk and chickpeas! Oilseeds must be heat treated before processing. Creaming fruits and vegetables: apricot, plum, pepper cream, garlic cream Motor: 4 kW 380V Cpodpfx Ajxvrxzefpju Capacity: 20–60 kg/h Cream fineness, particle size: 50–150 micron

Year of construction: 2025, condition: new, functionality: fully functional, Nutcracker Materials that can be cleaned: -hazelnuts, -walnuts, -plum stones, -apricot stones, -sour cherries, -cherry stones, -almonds Machine function: Crushing, breaking, removing seed shells. -Motor 380v or 220v, 2.2 kw -Capacity 120-900 kg/h -Efficiency 98%-100% Cjdpfx Aswizubjfpjpu

Condition: excellent (used), functionality: fully functional, Cherry and plum pitting machine Model: MPB for easy pitting Processing capacity approx. 35-190kg/h depending on fruit and size Tabletop device with hand wheel without circuit breaker DGUV V3 tested Connection 400V, 500Watt, 16A-CEE plug Dimensions: 465 x 410 x 480 mm, WxDxH Used machine cleaned and checked with 3 months warranty Option: cherry plate cherry stoner Visit our large bakery machine exhibition Cpedpfjiduifex Afpeu

Year of construction: 2020, condition: new, Stainless steel design Cedpfxjcl Tu Io Afpjpu auger type infeed hopper For de-stoning of cherries, plums, sour cherries, apricots, peaches,... For different sieves Sieve with perforation Ø 5 mm is in the machine Electrical power supply: 400V 50 Hz 3 Phases / 11 kW Capacity: 2500 kg/h (depending on fruits and ripeness) Stepless rotor speed regulation

Condition: used, Year of construction: 2014, working width 250 mm working length 250 mm work height max. 280 mm laser capacity in Watt 400 Rofin Csdpfx Ajwdiwyjfpspu travel -z axis 10 - 1000 mm/s positioning accuracy +/- 0,1 mm repeating accuracy +/- 3,5 my capacity 6,8 kVA Required air-pressure 6-10 bar Type of gas Schutzgas Stickstoff 5 bar dimensions of the machine ca. 5,9 x 4,2 x 3 m range L-W-H 2,44 x 1,63 x 2,36 m weight 2 300 kg Little used Concept Laser M2 Cusing system for processing reactive and non- reactive powder materials. Design of process chamber, handling station, powder suction according to ATEX Directive II for flammable substances. Materials: steel, stainless steel + aluminum. Supplementing titanium against additional payment possible. Dynamic coating system with 3 different wiper blades. Peripherals and accessories: Rofin laser source - photo 4 Nitrogen generator (in the other room, photo 7) External filter including fan and operating hours counter: 10464 - Photo 8. Storage container for the filter inserts. Transport device with lift for powder loading - photo 9. 6 stainless steel powder charging containers. Pneum. Vibrating sieve for attachment to the powder container. Powder container rack for swap containers, dimensions 1.15 x 0.17 x 1.22 m - photo 10. Orange wet vacuum cleaner - photo 8. Selling due to production change. Price at the time € 1/2 mio! Vid 1: Machine outside, Vid 2: Machining - created on this machine, Vid 3: Slide show Workpiece creation on this machine + accessories. Machine dealer with own stock of 1600 m².

Condition: excellent (used), quality grade 1 Cpjdpfeu Dpaysx Afpsu

Condition: excellent (used), Year of construction: 1976, centre height 76 mm centre distance 190 mm spindle bore 21 mm taper MK 3 weight of the machine ca. 40 kg dimensions of the machine ca. 720 x 210 x 215 mm Barely used Jung optical dividing head with tailstock in a wooden box with 9 collets: 3, 4, 5, 6, 7, 8, 9, 10, 11 mm. Reduced special price. Cpodpfsu Twclsx Afpeu

Condition: used, diameter 315 mm bore 89 mm Machine dealer with own stock of 1600 m². Cpedpfsx Edumsx Afpeu

Condition: reconditioned (used), functionality: fully functional, Cherry and plum pitting machine Model: MPB for easy pitting Processing capacity approx. 35-190kg/h depending on fruit and size Tabletop device with hand wheel with circuit breaker DGUV V3 tested Connection 400V, 500Watt, 16A-CEE plug Dimensions: 465 x 410 x 480 mm, WxDxH Used machine cleaned and checked with 6 months warranty Option: Csdjidui Ujpfx Afpjpu cherry plate cherry stoner Visit our big bakery machines exhibition

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar Cpedpovtgn Njfx Afpsu hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Condition: used, current intensivity 140 A plate thickness 1,5 mm welding range CO2: 35 - 225 A welding range 30Ar+CO2: 30 - 250 A Cjdpfxoxbtmdj Afpspu weight of the machine ca. ca. 90 Kg dimensions of the machine ca. 0,4 x 0,8 x 0,8 m