Used Portal for sale (1,342)

Condition: used, Year of construction: 2007, x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm Control Sinumerik 840 D Siemens distance between columns max. 3.000 mm passage max. 1.950 mm distance spindle center to table max. 1.800 mm distance spindle nose and table 1.350 / 1.500 mm type P 8005020/00-4 turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 20 kW max. Torque 48 Nm tool taper HSK-A63 DIN 69063 Spindle Extension 450 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° type P 8002320/00-4 turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 40 kW max. Torque 1.100 Nm tool taper HSK-A100 DIN 69063 Spindle Extension 300 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° table surface area 4.000 x 2.200 (2x) mm max. table load 12 / 20 t height over floor 700 mm number of T-slots 11 + 19 T-slot - width 28H7 mm T-slot - distance 200 mm number of toolpositions 327 pos. number of toolpositions HSK A63: 156 pos. number of toolpositions HSK A100: 171 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 / 500 mm max. tool weight HSK A63: 5,0 kg max. tool diameter HSK A100: 315 mm max. tool length HSK A100: 500 / 800 mm max. tool weight HSK A100: 40,0 kg feed speeds X: max. 30.000 mm/min feed speeds Y/Z: max. 40.000 mm/min feed speeds B: 3.600 °/min feed speeds C: 2.160 °/min Accelaration X: max. 1,5 m/s² Pjdjvy Ihdepfx Ab Iogw Accelaration Y/Z: max. 3,2 m/s² x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm b-axis +110° / -10 ° c-axis +/- 200 ° total power requirement 150 kVA dimensions of the machine ca. 25,0 x 12,0 x 7,0 m 5-Axis Gantry-Big-Machining-Center DROOP + REIN - TFS 22 40 DT D40 P - two Milling-Heads - ca. 4.000 Power On Hours - X-Achse 10.000mm (coupled) / 2x 5.000mm (single-table) - 3 axes simultaneously (X, Y, Z) - 2 positioning axes (B, C) - tools upon request

Condition: new, Year of construction: 2025, HYDRAULIC PORTAL STRAIGHTENING MODEL HSPS400 / 400 TON Ram Cylinder Capacity (Ton) 400 Ton at 250 Bar Min. Working Pressure (Bar) 30 Bar Max Working Pressure (Bar) 250 Bar (25 Mpa) Cylinder Diameter Ø450 mm * 1 Pc Stroke (mm) 1000mm Daylight (mm) 1300mm Table size (mm) 6000 x 3100 mm Travel size (mm) 4700 x 2600 mm Advance Speed (mm/sec) 7 mm/sec Return Speed (mm/sec) 14 mm/sec Working Speed (mm/sec) 3-7 mm/sec Motor (Kw) 25.1 KW Pump (liters) 45 CC BOSCH Rexroth Pedpfxjwbtlvs Ab Ijgw Overall dimension (LxWxH) 5500 x 7000 x 4200 mm Weight (Kg) Approx. 45,000 KG

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Main Cylinder Press Capacity: 200 T - Maximum working pressure: 285 bar - Cylinder stroke: 1500 mm - Clear width / clear height: 1500 mm - Distance between columns: 2050 mm - Maximum lateral cylinder displacement: 1450 mm - Maximum longitudinal frame displacement: 2800 mm - Table plate dimensions: 4000 x 2000 mm Pgodoxrb Nbepfx Ab Iew - Hydraulic power unit output: 5.5 kW - Approach speed: 20 mm/s - Working speed: 2 mm/s - Hydraulic oil is not included in the delivery scope - Hydraulic power packs are mounted on top of the press - Hydraulic manifold and valves by Rexroth - Air filter brand: FILTREC - Oil filter brand: FILTREC - Hydraulic cooling by air and water cooler - Stroke cylinders integrated into the working table Rod diameter: 25 mm - Stroke: 80 mm - Control via cylinder control system or hydraulic power unit with manual lever control - 10 stroke cylinders installed - Digital control with stroke measurement via encoder and pressure measurement with digital readout - Siemens KTP 900 – 9" touchscreen for programming (up to 99 programs): - Maximum up and down stroke of the cylinder - Pressure holding time at the lower table - Decompression time - Working pressure setting - Piece counter - Pre-stop up/down stroke with accuracy of 0.1 mm - Alarm management - Frame-mounted display for real-time operating parameter monitoring - Wireless remote control with two buttons for simultaneous operation - Control cabinet with Siemens CPU - Hydraulic power pack with solenoid valves (replaces pendant control panel) - Air/oil heat exchanger with decompression valve 5. ELECTRICAL INSTALLATION AND SAFETY - PLC system by SIEMENS (S7-1200 series) - Siemens LCD touchscreen (9") MTP900 fitted in the control cabinet - Electrical components from SIEMENS, ALLEN BRADLEY and PHOENIX - System pressure of the pressure cylinder adjustable via LCD touchscreen - Operating mode (semi-automatic and automatic), power, vertical stroke, and dwell time of the upper cylinder are programmable - 99 recipes storable; all aforementioned values can be programmed per recipe - Activation via wireless remote - Dual button for slow/fast up and down movement, emergency stop, and movement confirmation - Touch-sensitive safety strip mounted at the bottom of portal columns for safety - Control cabinet mounted to bridge sidewall - Anti-rotation device for the cylinder - Oil temperature displayed on LCD touchscreen - Overheat warning for hydraulic oil displayed on LCD touchscreen - Filter contamination status displayed on LCD screen - System faults displayed on LCD touchscreen - Pressing status information displayed on LCD display - Once oil temperature reaches 45°C, the air cooler begins operating to cool the oil. If 65°C is reached, the machine stops operation until it cools back to operating temperature. - Operating manual included - System complies with all essential safety and health requirements according to CE regulations.

Year of construction: 2008, condition: excellent (used), ZEISS ACCURA 16.24.10 RDS-CAA Pgjdpjnp Hvujfx Ab Isw X 1,600 / Y 2,400 / Z 1,000 RDS CAA touch probe with VAST XXT technology Stylus changing system 8 positions Control C99 Software on request - Calypso / HolosNT Warranty 12 months Installation, commissioning, acceptance according to DIN EN ISO 10360-2,4,5

Condition: good (used), Technical parameters Maximum cutting capacity Round 650mm Square 650×800mm Saw blade Saw blade speed 20~80 m/min Saw size Podpfjullzhex Ab Ijgw 54X1.6 Guides Carbide and bearing blade guides Cleaning Wire brush & flood coolant Tension Hydraulic Motor power 7.5 kW Hydraulic 2.2 kW Coolant 0.12 kW

Condition: good (used), Year of construction: 2005, travel distance X-axis: 3,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,000 mm, Unisign Uniport 6000 portal milling machine, year of manufacture 2005, Siemens 840 D control, travel range X/Y/Z 3000/3000/1000 mm, C axis for turning operations, table Ø 2500 x 2000 mm, max. turning diameter Ø 3000 x 2500 mm, max. turning height 1000 mm, Psdpfxexqmdus Ab Iogw angle head for lateral machining, 2.5° Hirth coupling, spindle speed up to 6,000 rpm, spindle power 36 kW, taper HSK 100, tool changer with 30 positions, 3D measuring probe, chip conveyor, faceplate Ø 2000 mm, max. faceplate load 10,000 kg, machine weight 45,000 kg,

Condition: good (used), Year of construction: 2017, operating hours: 9,380 h, functionality: fully functional, machine/vehicle number: 4455, Numerically controlled machining center max. panel sizes: 4,000 x 2,300 mm 1 Kuka KR420R3300 robot Pjdpfsr E D Eaox Ab Iogw 1 Kuka KR200L140 robot 1 Kuka KRL140-3Comp robot Conveyor belt for removing the scrap metal Suction Ruwac Zone 22

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,400 mm, travel distance Z-axis: 1,500 mm, table length: 6,000 mm, table width: 3,000 mm, spindle speed (min.): 3,000 rpm, A CNC portal milling machine FKD-Feichter with double column is available. Travel range X/Y/Z/W: 6000mm/4800mm/1500mm/1300mm, table dimensions X/Y/Z: 6000mm/3000mm, max. workpiece weight: 115,000kg, max. table load: 6,400kg/m², total machine bed length: 14,500mm, portal dimensions X/Y: 3,000mm/4,400mm, C-axis: 360°, A-axis: +/-120°, ram section: 700mm/700mm, feed rate: 10m/min. Total system dimensions X/Y/Z: approx. 15,100mm/6,100mm/7,000mm, total system weight: approx. 115,000kg, control system: Heidenhain. Includes chip guard, coolant system, and hydraulic unit. The machine was built at the site in 2022. The ram and spindle have been freshly overhauled. Documentation is available. On-site inspection is possible. Immediately available. Pgodpfx Absxp Rgks Isw Three heads: Fork milling head with A-axis, 90-degree angular head, spindle extension – straight head, tool holder SK 50.

Condition: good (used), Year of construction: 2009, travel distance X-axis: 6,230 mm, travel distance Y-axis: 4,250 mm, travel distance Z-axis: 1,100 mm, table length: 6,000 mm, table width: 3,000 mm, table load: 15,000 kg, Portal milling machine KAO MING - KMC 636 Multiface Double guideway four box way construction Head changer for Multi-Face machining off larger compontents ATC tool changer for Horizontal and vertical milling head swivabel Distance table spindle nose    345 - 1445 mm Distance table spindle center 132 - 1232 mm Indexing Horizontal head 5 Degrees x 72 positions HeidenHain iTNC530 with HR410 handwheel Pedpjxf Haxsfx Ab Ijgw Spindle torq 1018 Nm ISO50  X - Travel: 6230mm Y - Travel: 4250mm Z - Travel: 1100mm Distance between column: 3600mm Table Length: 6000mm Table Width: 3000mm Table load: 15000 Feed rate X-Axis: 7000mm/min. Feed rate Y-Axis: 8000mm/min. Feed rate Z-Axis: 10000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 4000Rpm ATC / revolver: 30 Number of controlled axis:3+2 Chip conveyor: Yes Coolantsystem: Yes Length: 14330mm Width: 7913mm Height: 5080mm Weight: 66000kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 12,000 rpm, controller model: Heidenhain iTNC530 mit Handrad, Machine with 4th axis as a swivel axis & regularly serviced by the machine manufacturer! TECHNICAL DETAILS Working areas X-axis: 3,000 mm Y-axis: 6,000 mm Z-axis: 1,250 mm Pgedpfexcld Dex Ab Iew Milling head A-axis: controllable, tiltable Milling spindle Spindle power: 4.4 kW Spindle speed: 12,000 rpm Tool holder: 78/8 flange Tool clamping: manual with clamping nut Linear axis drives Feed rate X, Y, Z axes: up to 20 m/min Axis acceleration X, Y, Z axes: up to 1.5 m/s² MACHINE DETAILS Control: Heidenhain iTNC530 with handwheel Connected load: approx. 25 kW Main fuse: 42 A Dimensions & Weight Space requirement for machine: approx. 5,500 x 9,000 x 4,500 mm Total weight: 9,600 kg FEATURES Conversion to high-frequency spindle possible Important: Table and the wooden board shown in the photos are not included in the scope of delivery.

Condition: used, mileage: 5,21,000 km, power: 315 kW (428.28 HP), first registration: 01/2017, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, next inspection (TÜV): 01/2026, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 7,280 mm, loading space height: 2,130 mm, Equipment: ABS, air conditioning, soot filter, * NET PRICE * Antos 25-43 * Automatic * Engine brake * Edscha sliding roof * Portal doors * TANG body * LxWxH: 7.28 x 2.48 x 2.13 m * Stake pockets * Underrun protection * Lift axle * Sun visor * Chassis No.: 101132.. * Unladen weight: 10,065 kg * German vehicle * Good condition WhatsApp: Subject to errors and prior sale! Sale is made without any warranties! - We speak Russian - We speak English - We speak Polish - Μιλάμε ελληνικά - Hablamos español Pgsdjxnfp Ropfx Ab Isw

Condition: good (used), Year of construction: 2016, BG Cam 1325 ATC, Year of manufacture 2016, Siemens 808 D control system, Travel X/Y/Z 1270/2540/150 mm, High pressure vacuum table, Table with 4 zones, Yaskawa servo motor drive, rapid traverse X/Y 35 m/min, Podpfx Aouhzyqjb Iogw rapid traverse Z 15 m/min, Resolution 0.001 mm, repeat accuracy 0.01 mm, Spindle speed up to 24,000 rpm, new spindle 2024, ER 25, 6-station tool changer, linear guides, tool length measurement, vacuum pump, suction foot,

Condition: like new (used), Year of construction: 2020, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 5645, travel distance X-axis: 6,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,600 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, total length: 6,550 mm, table length: 2,500 mm, table width: 2,500 mm, total width: 15,900 mm, spindle speed (max.): 4,000 rpm, total height: 11,500 mm, overall weight: 57,000 kg, working range: 2,500 mm, grinding spindle motor power: 46,000 W, Ladies and Gentlemen, Pgedpfettri Tex Ab Ijw Enclosed we advertise our portal bed milling machine. Installation winter 2019/2020. 12,000 operating hours. Price on request. The machine is currently still in operation. The price is for the machine only. Dismantling, transportation and installation are the responsibility of the buyer. We are looking forward to serious inquiries. Many thanks in advance.

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm Pjdpfsvt Dwbsx Ab Iegw - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 4,230 mm, travel distance Y-axis: 1,950 mm, travel distance Z-axis: 750 mm, table length: 4,000 mm, table width: 1,250 mm, table load: 11,000 kg, Portal milling machine KAO MING - KMC 4000 SV-H Double guideway two box way construction Head changer for Multi-Face machining off larger compontents ATC tool changer for Horizontal and vertical milling head swivabel Distance table spindle nose    213 - 1093 mm Distance table spindle center  130 -.mm Pgedjxf E Twopfx Ab Ijw Indexing Horizontal head 5 Degrees x 72 positions HeidenHain iTNC530 with HR410 handwheel Spindle torq 1018 Nm ISO50 Universal Huron type milling head X - Travel: 4230mm Y - Travel: 1950mm Z - Travel: 750mm Distance between column:1500mm Table Length: 4000mm Table Width: 1250mm Table load: 11000 Feed rate X-Axis: 12000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 12000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 4400Rpm ATC / revolver: 30 Chip conveyor: Yes Coolantsystem: Yes Length: 10100mm Width: 4500mm Height: 4250mm Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1998, Pressing force: 5000kN, max. operating pressure: 500bar, portal clearance: 2600mm, opening height: 470mm, max. straightening ram stroke: 500mm, min. edge distance: 375mm, rapid traverse: 450mm/min, straightening speed: 45mm/min, return speed: 1100mm/min, feed rate: 12m/min, max. feed force: 5000kN, table height: 1000mm. Machine dimensions X/Y/Z: approx. 4600mm/3250mm/3250mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Pgedpfx Asxlit Isb Iow

Condition: used, first registration: 09/2024, For sale: A new refrigerated semi-trailer door (LEFT) from the renowned brand Krone, suitable for trailers with a width of 2.65 m. This is the model with part number 550017381, known for its robust quality and durability – ideal for professional use in the transport industry. Currently, 3 units are available, each offered at a special price of 980 EUR net (plus 19% VAT). Secure a high-quality replacement door for your Krone refrigerated trailer now! Pedsumz Hcopfx Ab Iegw

Condition: good (used), Year of construction: 2008, Urban PF 3000 / machining center in portal design, Year of construction 2008, Heidenhain iTNC 530 control system, travel X/Y/Z 3210/695/585 mm, Machining center in portal design, Drilling capacity in ST 60 Ø 18 mm, M 16, Spindle speed up to 8,000 rpm, SK 40, Ww 12 times, Table size 3,000 x 700 mm, Pgsdpfx Aju Tptcsb Ijw chip tray, coolant system, electric handwheel, tool length measuring device,

Condition: excellent (used), mileage: 8,67,099 km, power: 199 kW (270.56 HP), first registration: 07/2006, fuel type: diesel, axle configuration: 4x2, fuel: diesel, wheelbase: 3,900 mm, driver cabin: day cab, gearing type: automatic, emission class: euro4, Year of construction: 2006, = Additional Options and Accessories = - Power Take-Off (PTO) = Remarks = YS2P4X20002017301 = Additional Information = Technical Information Number of cylinders: 5 Engine displacement: 8,867 cc Maximum front axle load: 6,700 kg Maximum rear axle load: 11,500 kg Dimensions Dimensions (L x W): 690 x 250 cm Weights Unladen weight: 9,880 kg Payload: 8,320 kg GVW: 18,200 kg Functional Pump: Yes Condition Technical condition: very good Visual condition: very good Identification License plate: BS-DJ-82 Additional Information Contact Sales for further information. = Company information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee an answer within 8 hours. Prices are without VAT. No rights could be derived from given information. Office phone: MOB: Nederlands - English - Deutsch - Francais - Español - Italiano)Available on What's App and Viber. MOB: Nederlands) Available on What's App and Viber. When you pay by bank transfer, the money needs to be tranfered to our Bank Account underneath. Always check the payment details that are stated on our website. In case you have received other information please contact us. In case you have doubts please call us so we can verify the invoice and/or payment. Bench details: Rabobank Pgjdpfx Abow S Infs Isw Lane of Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/BTW/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Travel distance: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw Guide type: recirculating ball guide size 20 Payload: 60 kg Maximum speed of ball screw: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Max. current consumption: 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper jaws open pneumatically - Unit is mounted on a welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Pjdpow Uc T Iefx Ab Iogw Very good condition Nearly identical linear unit available under stock number 59700

Condition: good (used), Year of construction: 2004, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 600 mm, CNC portal milling machine FPT - STINGER MACH-ID 8829 Manufacturer: FPT Type: STINGER Control: HeidenHain iTNC530 Year of manufacture: 2004 Chip conveyor Laser tool setter Portal Handwheel Full A/B-Automatic head High pressure coolant Specifications Metric US Standard X - axis 1750 mm Y - axis 1400 mm Z - axis 600 mm Table length 1200 mm Table width 1000 mm Table load 5000 Feed X - axis 35000 mm/min. Y-axis feed 35000 mm/min. Pgodpeuni D Esfx Ab Iow Feed Z-axis 35000 mm/min. Tool holder HSK 63 ISO/Bt/Mk Spindle power 25 kW spindle speed 18000 rpm Tool changer 30 IKZ 20 Number of controlled axes 5 Chip conveyor Yes Cooling device Yes Dimensions (estimate) length 6000 mm width 4000 mm height 3850 mm weight 21000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Initial commissioning: 2000 Control system: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ±110° C-axis: ±300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² Pgjdpfx Abew Rl S Ss Iew 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic Spindle freshly overhauled at the end of 2024! Linear axis drives Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions & weights Machine footprint with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of supply Condition of the machine Fully functional, in very good condition. Machine remains connected and is available immediately.

Condition: good (used), Year of construction: 2000, Maka MM 7 T / 5 axes, year of manufacture 2000, Siemens 840 D control, X/Y/Z travel 2x1500/2000/600 mm, portal milling machine for light machining, milling spindle 7.5 kW, NC milling head, A axis 540°, B axis +/- 100°, 10-position tool changer, HSK F 63 holder, max. saw blade diameter 170 mm, spindle speed up to 24,000 rpm, X/Y axis rack and pinion, Z axis ball screw, vacuum table, aluminium flat table. Podpfx Abswuy Aho Isgw

Condition: used, Linear guide, portal axis SCHNEIDER ELECTRIC / FESTO Electric slide Pgedpfjw Uc Tzox Ab Iow Motor type: ILS1B571PC1A0 Year of manufacture: 2010 Axis travel: 300 mm Power supply: 36 Volt (DC) Carriage: 86 x 54 mm - Synchronous servo motor / stepper motor SCHNEIDER ELECTRIC, type: ILS1B571PC1A0 - Linear guide FESTO, type EGSK-33-300-6P - Ball screw Ø 10 mm, pitch 6 mm - 2 adjustable position sensors Dimensions L x W x H: 580 x 120 x 57 mm Weight: 6.5 kg in good condition

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, Fooke Endura Type 8. Year of manufacture 1999, Siemens 840 D Powerline control, X/Y/Z travel 3000/2500/1150 mm, Bridge height 800 mm, 23 kW milling spindle, Forked milling head with 365° rotation axis, Swivel axis +/- 100°, Feed rates up to 15 m/min, Pgsdpfx Abev N Uuvo Iow Spindle speed up to 16,000 rpm, HSK A 63, Electric handwheel, Machine weight 50,000 kg