Used Portal for sale (1,327)

Condition: good (used), Year of construction: 2004, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 600 mm, CNC portal milling machine FPT - STINGER MACH-ID 8829 Manufacturer: FPT Type: STINGER Control: HeidenHain iTNC530 Year of manufacture: 2004 Chip conveyor Laser tool setter Portal Handwheel Full A/B-Automatic head High pressure coolant Specifications Metric US Standard X - axis 1750 mm Y - axis 1400 mm Z - axis 600 mm Table length 1200 mm Table width 1000 mm Table load 5000 Feed X - axis 35000 mm/min. Y-axis feed 35000 mm/min. Feed Z-axis 35000 mm/min. Tool holder HSK 63 ISO/Bt/Mk Spindle power 25 kW spindle speed 18000 rpm Tool changer 30 IKZ 20 Number of controlled axes 5 Chip conveyor Yes Cooling device Yes Dimensions (estimate) length 6000 mm width 4000 mm height 3850 mm weight Ksdpjuni D Ejfx Aklona 21000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, total length: 5,179 mm, table length: 1,800 mm, table width: 650 mm, total width: 3,345 mm, rapid traverse X-axis: 28,000 m/min, rapid traverse Y-axis: 28,000 m/min, rapid traverse Z-axis: 28,000 m/min, table load: 1,500 kg, overall weight: 7,500 kg, X - Travel: 1500mm Y - Travel: 800mm Z - Travel: 500mm Table Length: 1800mm Table Width: 650mm Table load: 1500 Feed rate X-Axis: 28000mm/min. Feed rate Y-Axis: 28000mm/min. Feed rate Z-Axis: 28000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13.5kW Speeds / ranges: 8000Rpm Knodpfxoyhph Ee Aklja ATC / revolver: 24 Coolant through spindle / Bar:10 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Length: 5179mm Width: 3345mm Height: 2595mm Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), travel distance X-axis: 12,000 mm, travel distance Y-axis: 7,300 mm, travel distance Z-axis: 3,000 mm, total length: 30,000 mm, table length: 12,000 mm, table width: 4,730 mm, total width: 12,000 mm, total height: 10,475 mm, table load: 2,50,000 kg, overall weight: 4,00,000 kg, Make : Waldrich - Siegen - Typ : PF-F-150(1)-530/400 - No. : 11.093/0 - Age : Overhault 2004 ( Euro 2.2 Mil) X Travel : 12.000 - Y Travel : 7.300 - Z Travel : 3.000 - W Travel : 4.000 - Between column : 5.000 - Table width : 4.730 - Table length : 12.000 - Table load : 19 t / mtr. Ca. 250 ton - Table feed : 10.000 mm/min. - W axis : 3.000 mm/min. - T axis : 6.000 mm/min. - Cross adj. milling head : - Vert. adj. cross rail : - Horizontal hydrostatic spindle ram - Milling spindle Ø : 560 Kodpfxjytrxkj Aklsna - Milling tool taper : iso 60 - C axis feed : 5.000 mm/min. - Milling motor : 90 kW - Spindle speed : 2.500 R/pm - Z axis stroke : 3.000 - Z axis feed : 2.000 mm/min. - Milling Küma Angle head WF2 90 kw- 450 - Milling Küma Uni. UB1D 60 kw - 2400 - Milling Küma Fixed GB1D 90 kw- 2400 - Milling Küma Angle head WF1? - Electric requirement : 3 x 400 V / 50 Hz - Power requirement : 600 kVA / 630 Amp - Capacity 4.000 L coolant true spindle 20/40 Bar Machine is rebuild in 2004 by Schiess Bed – Table assembly group: * Renewal of sliding lining * Grinding of guideway * Renewal of table drive * Direct linear measuring syst. * Hydrostatic Portal and cross rail: * Modification of adjusting spindle trape Zoidal spindle was recplaced with ball screw * Direct linear measuring syst. * New drive motors for relization of higer speed on feed axes of milling support. * New milling support with hydrostatic guideways Electric system: * Complet elctric cabinet switchgear * Complet new wire * Siemens Sinumrik 840 D in 6 axis !! Equipment / parts : * Complet new raumag janich covers * Complet new double chip conveyor * Complet with big tooling packet * Complet with big mounting equipment - Under power in Europe - Free directly - Controlled axis X / Y / Z / W / C / B axis - Over all height : 10.475 mm - Over all width : 11.934 mm - Over all length : 30.000 mm - Total weight : ca. 400.000 Kg Rebuild in 2004 for EUR 2.200.000 !This CNC Waldrich Portal milling machines was used in the Energie Field for steam turbien case machining. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2008, travel distance X-axis: 4,230 mm, travel distance Y-axis: 1,950 mm, travel distance Z-axis: 750 mm, table length: 4,000 mm, table width: 1,250 mm, table load: 11,000 kg, Portal milling machine KAO MING - KMC 4000 SV-H Double guideway two box way construction Head changer for Multi-Face machining off larger compontents ATC tool changer for Horizontal and vertical milling head swivabel Distance table spindle nose    213 - 1093 mm Distance table spindle center  130 -.mm Indexing Horizontal head 5 Degrees x 72 positions HeidenHain iTNC530 with HR410 handwheel Spindle torq 1018 Nm ISO50 Universal Huron type milling head X - Travel: 4230mm Y - Travel: 1950mm Z - Travel: 750mm Distance between column:1500mm Table Length: 4000mm Table Width: 1250mm Table load: 11000 Feed rate X-Axis: 12000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 12000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 4400Rpm ATC / revolver: 30 Chip conveyor: Yes Kodpfx Akjxf E Twolena Coolantsystem: Yes Length: 10100mm Width: 4500mm Height: 4250mm Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2010, condition: used, Year of manufacture: Mar 2010 New: No Knedpfxjv Sra Io Aklja

Condition: used, mileage: 3,45,086 km, power: 184 kW (250.17 HP), first registration: 04/2014, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2014, Equipment: AdBlue, air conditioning, cruise control, power mirror, soot filter, = Additional Options and Equipment = - Leaf suspension - EPS (Electronic Power Steering) - Tipping hydraulics - Particulate filter - Radio/CD player - Side door - Toolbox = Further Information = Front axle: Steering; Suspension: Leaf springs Rear axle: Suspension: Air suspension Unladen weight: 6,000 kg Payload: 5,990 kg gross vehicle weight (GVW): 11,990 kg Warranty: No liability for typographical or printing errors. Subject to change, prior sale, and errors! Please contact Emad Al Shogran for further information. Vehicle number: 125 MAN TGM 12.250 4x2 Skip Loader Heimann / Euro 5 .: WMAN14ZZ1EY311511 German vehicle Transmission: Automatic Suspension: Leaf/Air Air conditioning Engine brake Cruise control Emission standard EURO 5 Skip loader body Brand: Heimann Type: AKF - V Year of manufacture: 2014 with radio remote control Special equipment: Rear crossmember, Trailer coupling: Ringfeder 4040 G 145B, Trailer socket ABS, Exterior mirror wide angle and electrically adjustable & heated, left, Exterior mirror wide angle and electrically adjustable & heated, right, Brake connection 2-line at rear frame, Rear axle differential lock, Cab: with 3 rear window panels, tinted, Driver's seat comfort, air-suspended, Remote central locking, Flame start system, 12-speed gearbox - Type: ZF 12 AS, Tipmatic OD, Automatic climate control, 350 ccm air compressor, PTO NH/1C without flange, 12V / 180W socket in cab, Control module for external data exchange Other equipment: Axle configuration: 4x2, Starting aid/front mirror, Seat belt warning left, Audio system: Radio MAN basic Line (Radio/CD), Battery 88 Ah, On-board computer MAN-Tronic, Curb mirror right, Compressed air connection front, Electronic braking system MAN-Brakematic, EURO 5 engine, Cab: C (Compact), Suspension: Leaf/Air, Tinted windscreen, Alternator 28 V 80 A, Rear axle HY-0925, Body/chassis: chassis, Fuel filter heated, Fuel tank: 150 L, Fuel tank: combination tank - 150 L diesel + 10 L AdBlue solution, Adjustable steering column (steering wheel), High-mounted air intake, Dry air filter right below, Engine 6.9 L - 184 kW diesel, Engine brake, Spare wheel carrier behind rear axle, Rear axle disc brakes, Front axle disc brakes, Front mud flaps, Rear axle stabiliser, Plastic bumper, Tinted door windows, Rear underrun protection, Viscous fan, Front axle VOK-05 cranked, Permissible total weight 11.99 t Ksdpfxezdb Nte Akljna = Company Information = No liability for typographical or printing errors. Subject to change, prior sale, and errors reserved! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust E-mail:

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Knodpfx Akjw Uc T Ielea Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Travel: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw Guide type: recirculating ball linear guide size 20 Payload: 60 kg Maximum speed, ball screw: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Max. current draw: 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper jaws open pneumatically - Unit mounted on welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition Nearly identical linear unit under stock number 59700 Drive controller 61488 = suitable for linear units 59702 + 59700

Condition: new, stroke lenght (max.): 400performance of pump: 45cc-65motor: 22table height: (ohne Auflageplatte) 750 mm - (mit Auflageplatte) 820table area: 3500 mm x 2000 mm - Lichteweite : 2200Travel bridge: 2800motor: (IE-3) 22Return speed: 50messurements (LxWxH): 3500 x 3200 x 3600Cylinder: Ø 370- Capacity: 3000kN. (280 bar – 300 ton) - Cylinder: Ø 370mm. - Table surface: 3000 x 2000mm - Clearance: 2200mm. - Travel bridge: 2500mm. Knsdpfer Etulex Aklja - Lateral travel cylinder: 900 + 900mm. away from the middle. (1800mm.) - Installation height: max. 1200mm. (distance table or support plate to cylinder piston) WITHOUT MANDS - Stroke length: 400mm. - Pump: 45cc – 65Lt./min. - Forward speed: 10 - 5mm / sec. - Return speed: 50 mm / sec. - Engine: 22kw. (IE-3) - Table height: 750mm (without support plate) - 820mm. (with support plate) Accesories: - Hydraulics: Rexroth (CE valves) - Control system: Siemens S7-1200 - Siemens KTP.7'' screen - Control cabinet is mounted on the side wall of the bridge - Swiveling control panel - Pressure adjustable via screen (50 - 300 t) - Speed adjustable via throttle valve - Cylinder clad in chrome - Remote control (with cable) - Stroke length adjustable via distance sensors - 400V 50HZ 3 phases - Anti-rotation device for cylinder - Cylinder can be moved sideways via drive motor - Bridge can be moved via drive motor - Stairs - Light barrier protection for bridge areas - Cylinder piston mandrel: Ø 200 / 400 / 600mm. Long , Extension mandrels (3 pieces) are included

Condition: new, stroke lenght (max.): 400performance of pump: 45cc-65motor: 22table height: (ohne Auflageplatte) 750 mm - (mit Auflageplatte) 820table area: 3000 mm x 2000 mm - Lichteweite : 2200Travel bridge: 2300motor: (IE-3) 22Return speed: 50- Capacity: 3000kN. (280 bar – 300 ton) - Cylinder: Ø 370mm. - Table surface: 3000 x 2000mm - Clearance: 2200mm. - Travel bridge: 2500mm. Knjdpfx Asr D U I Dokloa - Lateral travel cylinder: 900 + 900mm. away from the middle. (1800mm.) - Installation height: max. 1200mm. (distance table or support plate to cylinder piston) WITHOUT MANDS - Stroke length: 400mm. - Pump: 45cc – 65Lt./min. - Forward speed: 10 - 5mm / sec. - Return speed: 50 mm / sec. - Engine: 22kw. (IE-3) - Table height: 750mm (without support plate) - 820mm. (with support plate) Accesories: - Hydraulics: DUPLOMATIC  - Control: LENZE & SCHNEIDER  - Control cabinet is mounted on the side wall of the bridge  - Pressure adjustment via rotary valve valve  - Speed adjustable via throttle valve • Cylinder covered in chrome  - Remote control (with cable)  - Stroke length adjustable via distance sensors  - 400V 50HZ 3 phase  - Rotation lock for cylinders  - Cylinder can be moved laterally via drive motor  - Bridge can be moved via drive motor  - Soft starter for motor  - Cylinder piston mandrels: Ø 200 / 400 / 600mm. Long Extension mandrels (3 pieces) are included

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, table length: 4,000 mm, table width: 2,000 mm, spindle speed (max.): 22,000 rpm, torque: 128 Nm, spindle nose: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE Dimensions: mm 4.000 x 2.000 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to X-axis movement. AXIS CHARACTERISTICS Axis feed rate: mm/min 50.000 Acceleration: m/s² 4 WORKING AREA (CLEARANCES) Maximum horizontal clearance: mm 3.200 Maximum vertical clearance under crossbeam: mm 1.926 Height of worktable from floor: mm 330 CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. B-axis rotation range: ± 185° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Tool interface: HSK-A63 DIN 69893 The head is supplied complete with a cradle for handling and storage. The cradle is used outside the working area and therefore does not reduce the machine’s actual working capacity. CHAIN TOOL MAGAZINE – 30 POSITIONS (HSK) 30-position automatic chain tool changer located at the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter (adjacent pockets occupied): mm 90 Max tool length: mm 300 Max tool weight: kg 10 MEASURING SCALE PRESSURIZATION Pneumatic system complete with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL LUBRICATION/COOLING Mist lubrication system. The mist is generated by mixing air and oil and is controlled via M-function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and provides cooling. Highly effective for improving surface finish quality. EXTERNAL TOOL COOLING Coolant distribution system controlled by the CNC, with nozzles positioned on the flange around the spindle. Complete with a tank (1,200-liter capacity) for coolant collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS Maximum installed power: kW 150 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • No. 2 chip conveyors positioned on both sides of the worktable Kjdpfxszb Evle Aklena • User and maintenance manual and CE declaration of conformity

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, A gantry system for automated loading or transport of heavy parts is for sale. This gantry system can be used for various loading applications (milling machines, lathes, paint lines, welding units, etc.). X travel – 11.6 meters, Y travel – 2.38 meters, Z travel – 2.5 meters. All axes are driven by SEW servo motors. Servo-driven single gripper for parts up to 500 kg. Kjdpfxowdnb Ds Akljna Control cabinet – PLC control – Siemens S7-1500 and SEW drives. The gantry system can be inspected by appointment in Overath.

Condition: new, Year of construction: 2025, table area: 2000 x 1000daylight: 700 (Abstand zwiwschen Tisch & Kolbenspitze)table height: 800Cylinder: 240motor: 7,5performance of pump: 22Forward speed: 9Return speed: 13tank capacity: 70 Capacity: 150 tons – 340 Bar / 172 tons – 380 Bar Motor Control: via Hand Lever Cylinder: Manually movable from the side Bridge: Movable via Hand Wheel Table Dimensions: 2000 x 1000 mm Installation Height: 700 mm (distance between table & piston tip) Piston Stroke: 400 mm Table Height: 800 mm Cylinder: Ø 240 mm Motor: 7.5 kW Pump: 22 Lt./min – ASC Speed: Forward: 9 mm/sec – Return: 13 mm/sec Tank Volume: 70 Lt Pressure Regulator Valve Pressure Gauge Display Pressure Hold Valve Weight: 2300 kg Kodpfx Aohu H Dpjkljna

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, Fooke Endura Type 8. Year of manufacture 1999, Siemens 840 D Powerline control, X/Y/Z travel 3000/2500/1150 mm, Bridge height 800 mm, Kodpfx Akov N Uuvelona 23 kW milling spindle, Forked milling head with 365° rotation axis, Swivel axis +/- 100°, Feed rates up to 15 m/min, Spindle speed up to 16,000 rpm, HSK A 63, Electric handwheel, Machine weight 50,000 kg

Year of construction: 2003, condition: ready for operation (used), - USED - 5-AXIS BRIDGE-TYPE CNC MILLING MACHINE WITH ROTATING TABLE LONGITUDINAL TRAVEL: 2700 mm TRANSVERSAL TRAVEL: 1100 mm Ksdpfewmxnmex Aklena VERTICAL TRAVEL: 1400 mm RAPID FEEDS L-T-V: 24 m/min TABLE SIZE: 1800 x 1800 mm MAX ADMITTED LOAD: 15000 Kg SPINDLE: 240-24000 rpm; 34 kW HEAD: CONTINUOUS A/B AXIS AUTOMATIC ; A-axis -110°+95° C-axis ±200° TOOL MAGAZINE: CHAIN-TYPE ; 42 POS CONTROL UNIT: FIDIA C20 DISTANCE SPINDLE NOSE-TABLE: 1600 mm WEIGHT: 21500 Kg OVERALL DIMENSIONS: 5950 x 5430 x 5220 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL

Year of construction: 1993, condition: ready for operation (used), - USED - 5-AXIS BRIDGE-TYPE CNC MILLING MACHINE LONGITUDINAL TRAVEL: 2800 mm TRANSVERSAL TRAVEL: 2200 mm VERTICAL TRAVEL: 1500 mm RAPID FEEDS L-T-V: 20 m/min TABLE SIZE: 3000 x 2000 mm MAX ADMITTED LOAD: 20000 Kg HEAD: A/B AXIS AUTOMATIC ; ISO 30 ; A-axis ±100° - B-axis ±185° ; 15000 rpm; 11 kW TOOL MAGAZINE: CHAIN-TYPE ; 12 POS Kedpfxjwla H Us Aklena CONTROL UNIT: FIDIA CXR10 DISTANCE BETWEEN UPRIGHTS: 3600 mm OVERALL DIMENSIONS: 7000 x 4000 x 6485 mm ACCESSORIES: PORTABLE HANDWHEEL

Condition: good (used), mileage: 3,56,690 km, power: 243 kW (330.39 HP), first registration: 03/2017, fuel type: diesel, tire size: 355/50R22.5, axle configuration: 6x2, wheelbase: 3,900 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2017, Equipment: AdBlue, onboard computer, soot filter, = Additional Options and Accessories = - Enclosed cab - Particle filter = Notes = Volvo FMX 330 6x2*4 - Skip loader - Euro 6 - Steering axle - Rear extendable Year of Manufacture: 03-2017 Mileage: 356,690 km VIN: YV2X9J0C3HA802686 Skip loader - Laxo telescope lift - LD186VA-2 Euro 6 I-Shift transmission Steering axle = Further Information = Transmission: I-Shift, automatic Front axle: Tire size: 355/50R22.5; Max. axle load: 9000 kg; Steered; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 295/60R22.5; Double tires; Max. axle load: 13,000 kg; Tire tread depth left (inside): 50%; Tire tread depth left (outside): 50%; Tire tread depth right (inside): 50%; Tire tread depth right (outside): 50%; Suspension: Air suspension Rear axle 2: Tire size: 355/50R22.5; Max. axle load: 7500 kg; Steered; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: Air suspension Unladen weight: 12,570 kg Kedpfjzaiqwjx Aklena Payload: 16,930 kg GVWR: 29,500 kg Technical condition: good Optical condition: good

Condition: new, pressing force: 200 t, DURENDUS DPS-200 – Hydraulic Gantry Straightening Press – 200 t – 1,500 × 2,000 mm The machine shown here was built and delivered on behalf of a customer. We can manufacture this machine for you at short notice. This is a hydraulic gantry straightening press from DURENDUS with a maximum pressing force of 200 t. The machine features a table size of 1,500 × 2,000 mm, a maximum installation height of 800 mm, and a stroke of 400 mm, making it ideally suited for straightening operations, press-fit processes, as well as applications in steel construction and tooling. Options (on request): The listed options are based on completed customer projects and allow for targeted customization of the machine to the specific application. The base machine offers a functional standard version – in practice, it is most often upgraded with additional equipment and configured according to project requirements. Examples: * Siemens S7-1200 PLC + 7'' display * Radio remote control * Safety strip at the base of the gantry columns (600 mm) * Table with T-slots * Motorized bridge travel * Extended travel range * Increased open height * Safety light curtain at floor level beneath the bridge * Laser distance measurement * Lifting cylinders integrated in the table ##### Technical Data & Information: Hydraulic Gantry Straightening Press – 200 t – 1,500 × 2,000 mm ==== General Information Manufacturer: DURENDUS Model: DPS-200 Design: Gantry Press / H-frame Press Pressing Force: 200 t (adjustable) Total Weight: approx. 8,500 kg Dimensions (W × D × H): approx. 2,450 × 2,200 × 2,750 mm Distance between Uprights: 1,580 mm Table Height: 900 mm ==== Working Area Table Size: 1,500 × 2,000 mm Max. Installation Height: 800 mm Ram Stroke: 400 mm Ram Extension: 300 mm ==== Movement System Lateral Cylinder Adjustment: ±750 mm Bridge Travel: 1,500 mm Operation: manual adjustment (cylinder and bridge) ==== Hydraulic Cylinder Max. Operating Pressure: 320 bar Working Speed: 9 mm/s Return Speed: 17 mm/s Knsdpfsyzfuiox Aklsa ==== Hydraulics & Drive Motor Power: 15 kW Pump Capacity: 32 l/min Tank Volume: 140 l Hydraulic Components: DUPLOMATIC Filter: FILTREC Cooling: Air cooler ==== Control System Operation: manual via hand lever valve Integrated safety PLC Components: SIEMENS Optional: PLC S7-1200 with 7" touch panel, recipe management, pressure and position control ==== Safety Hydraulic overload protection Electronic overload protection Upper/lower limit switches CE-compliant design ==== Electrical Connection Main Supply: 400 V AC Control Voltage: 24 V DC Frequency: 50 Hz Total Connected Load: approx. 18 kW Control Cabinet: IP54 ##### Fields of Application: straightening, press-fitting, forming, tool adjustment, steel construction, metal construction, mold making, automotive Hydraulic press, gantry press, straightening press, H-frame press, 200 T press, tryout press, tool tryout press, adjustable press, heavy-duty press The images shown are for sample purposes and may differ from the actual design.

Condition: new, pressing force: 300 t, 300 T Portal Straightening Press – Portal Press – 3,500 × 2,000 mm Table, 1,000 mm Open Height The machine shown here has already been built and delivered to a customer as a custom order. We can manufacture this machine for you again on short notice – and are happy to accommodate individual options. This is a hydraulic portal press with 300 t pressing force, designed for straightening, assembly, and machining processes on large-format components. Base price: €142,000 net Options (on request): The listed options are based on completed customer projects and enable targeted adaptation of the machine to the specific application. The base machine is a functional standard version – in practice, it is usually expanded with additional features and configured to project requirements. - Table plate with T-slots according to DIN 650 - 75 mm table plate - Servo-hydraulics (energy-efficient operation) - SIEMENS S7-1200 control with 7" touch panel - Wireless remote control (with or without display) - Air/oil heat exchanger - Ejector system in the table (various configurations possible) ===== Technical Data & Information: ==== General Information Design: Portal press Pressing force: 300 t (adjustable) Total weight: approx. 10,500 kg Overall dimensions (W × D × H): 3,285 × 3,520 × 3,500 mm ==== Working Area Table size: 3,500 × 2,000 mm Open height: 1,000 mm Frame clearance: 2,100 mm ==== Table & Ram Table height: 750 mm (without table plate) Ram stroke: 0–400 mm (adjustable) Extensions: 200 / 400 / 600 mm Cylinder diameter: Ø 310 mm Piston rod: Ø 220 mm Transverse cylinder travel: ±900 mm Longitudinal portal travel: 3,000 mm ==== Speeds Idle speed: 10 mm/s Return speed: 50 mm/s Portal travel speed: max. 33 mm/s ==== Hydraulics & Drive Pump capacity: 70 l/min Main motor: 7.5 kW Hydraulic tank: 200 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Standard operation: pendant control Optional: SIEMENS S7-1200 control Connection: 400 V / 50 Hz Total connected load: approx. 15 kW Knodpfx Ajyxnzyskloa ==== Equipment - CE certification - Safety limit switches - Overload protection (electrical & hydraulic) - Cable drag chain system - Two-coat paint finish (RAL colors selectable) ===== Straightening of large steel structures, vehicle manufacturing, maintenance, assembly work, special constructions. Portal press, straightening press, hydraulic press, 300 ton press, large table press, metalworking Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German Machinery Directives, European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds on these standards. Our key strength is special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 0112, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 9,000 rpm, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! Loading can take place on 08.09.2025 or 09.09.2025! TECHNICAL DETAILS Travel distances Travel X: 1,500 mm Travel Y: 3,500 mm Travel Z: 1,000 mm Worktable dimensions: 4,500 x 1,600 mm Spindle and Tooling Max. spindle speed: 9,000 rpm Swivel range of angular head (B-axis): ±90° Tool holder: SK 40 Kedsw Hrh Hepfx Aklona MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 8,000 x 5,000 x 3,700 mm Weight: 32,000 kg EQUIPMENT 2 ALMATIC machine vices Various clamping devices for the machine Technical documentation

Condition: used, Linear unit, linear axis, portal axis with servo drive, synchronous servomotor, electric slide, loading unit, linear guide with servomotor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO, type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical travel via Schneider Electric linear axis PAS43SBG1800 Travel: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw drive Guide type: ball bearing guide, size 20 Payload: 60 kg Maximum speed of ball screw spindle: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Knsdpjgf Ix Aofx Aklea Rated power: 1.912 kW Rated speed: 3500 rpm Current consumption: max. 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide slide - Gripper jaws open pneumatically - Unit is mounted on a welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition A virtually identical linear unit is available under storage number 59702.

Condition: new, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 305, Available: February 2023 Control: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots across every 250 mm Max load: 1000kg distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 min-1 Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blowing air / MMS: outside Drives linear axes Feed speed X and Y axes: up to 50 m/min Z-axis feed rate: up to 30 m/min Color Housing, portal, control cabinet: light gray Z-slider and milling head: orange Additional equipment - 15-way tool changer - Control in a separate, rollable desk Knsdpfswwq Hcsx Aklea

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Kodpowywcisfx Aklsna Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Images are sample photos from a new machine of this type. Original images to follow shortly!

Condition: excellent (used), Year of construction: 2012, First commissioned: 2012 Control: Heidenhain iTNC 530 including handwheel HR 420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,500 mm A-axis: ± 110° C-axis: ± 300° Knedpfx Akovy A Tnelja Clamping table Clamping surface: approx. 5,700 x 3,000 x 300 mm 2-axis milling head VH20 Spindle power: 40 kW Spindle speed: max. 25,000 min-1 Torque: 48 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blowing air: external Drives linear axes Feed rate X, Y axis: up to 50 m/min Feed speed Z-axis: up to 30 m/min Axis acceleration X-, Y-, Z-axis: up to 2.5 m/s2 Connection data Connection power: 190 kVa Back-up fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 7,700 x 5,850 mm Total weight: approx. 63,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Additional equipment - Coolant supply with belt filter system - 30-way chain tool changer - Work area cover - Chip conveyor, right side Optional for an additional charge: - BLUM laser Condition of the machine Fully functional, very good condition. Already dismantled and stored.

Condition: new, Year of construction: 2025, machine/vehicle number: 306, First commissioning: 2024 Control: Heidenhain TNC 640 including handwheel HR 520 X-axis: approx. 4,000 mm Y-axis: approx. 2,700 mm Z-axis: approx. 1,300 mm A-axis: ± 120° C-axis: ± 360° Clamping table Clamping surface: approx. 4,000 x 2,500 x 213 mm Aluminum with T-slots across every 250mm Max load: 1000kg distributed over the entire surface Kedpfxevy Dugj Aklena 2-axis milling head HS673 Spindle power: 22 kW Spindle speed: max. 24,000 min-1 Torque: 18 Nm Tool holder: HSK 63A Tool clamping: pneumatic Blowing air / MMS: outside Linear axis drives Feed rate X and Y axis: up to 60 m/min Feed rate Z axis: up to 40 m/min Color Housing, portal, control cabinet: light gray Z slider and milling head: orange Additional equipment - Work area cover - 16-way tool changer - Control in a separate, rollable desk Optional for an additional charge: - Blum laser tool measurement - Renishaw RMP60 radio probe - Heidenhain remote diagnosis Images show identical machine with slightly different equipment!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 12,000 rpm, controller model: Heidenhain iTNC530 mit Handrad, Machine with 4th axis as a swivel axis & regularly serviced by the machine manufacturer! TECHNICAL DETAILS Working areas X-axis: 3,000 mm Y-axis: 6,000 mm Z-axis: 1,250 mm Milling head A-axis: controllable, tiltable Milling spindle Spindle power: 4.4 kW Spindle speed: 12,000 rpm Tool holder: 78/8 flange Tool clamping: manual with clamping nut Linear axis drives Feed rate X, Y, Z axes: up to 20 m/min Axis acceleration X, Y, Z axes: up to 1.5 m/s² MACHINE DETAILS Ksdpfoxvx U Ajx Aklona Control: Heidenhain iTNC530 with handwheel Connected load: approx. 25 kW Main fuse: 42 A Dimensions & Weight Space requirement for machine: approx. 5,500 x 9,000 x 4,500 mm Total weight: 9,600 kg FEATURES Conversion to high-frequency spindle possible Important: Table and the wooden board shown in the photos are not included in the scope of delivery.