Used Pot Tape Drilling Machine for sale (66,119)

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. Itjdpfjxnlfljx Abcjd - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping Itsdjqa Txqepfx Abcod - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: used, Line boring machine WEBO with 4 stations type B 20 make no. 376/13; 376/14; 376/27; 376/36 year of construction approx. 1970 drilling capacity 20 mm spindle adaptor MK 2 - long spindle sleeve drilling head distance 335 mm throat 260 mm pinol stroke 190 mm table size 350 x 1500 mm distance drilling spindle/table min.30 mm / max. 700 mm Spindle speed drill head 376/13 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Itjdpfx Aeihmwtebced Spindle speed drill head 376/14 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/27 250, 355, 500, 710, 1000, 1400, 2000, 2800 rpm. Spindle speed drill head 376/36 180, 250, 355, 500, 710, 1000, 1400, 2000 rpm. Motor power 1,1 / 1,3 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 4 V-belt steps - drill head height adjustment via toothed rack and hand crank approx. 300 mm - height adjustable drilling table approx. 350 mm space requirement L x W x H 1750 x 1100 x 1900 mm weight 1900 kg good condition

Condition: excellent (used), Digital display Heidenhain Type: conventional Table KS 320 D Itodpfx Asyv Af Usbcjd Clamping surface: 530 x 270 mm Speed: 125 - 4400 rpm Feed: 0.03 – 0.40 mm/rev Drilling capacity in steel: 22 mm Thread cutting up to M16 Milling capacity in steel: 25 mm Drill spindle stroke: 120 mm Spindle motor power: 0.51 / 1.47 kW Dimensions: 2000 x 1200 x 1000 mm Weight approx. 900 kg

Condition: excellent (used), Numerical Control Type Power Control PC85T Software WoodWOP + TOPDRILL No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) No. 4 Vertical top pressure clamps Itjdpoyv Ev Aofx Abcod Motorized carpet to evacuate chips and wastes Total installed power (Kw) 35

Condition: excellent (used), Control: Heidenhain TNC 124 Travel paths X/Y/Z: 500/250/160 mm Travel path W: 480 mm Clamping area (L x W): 885 x 320 mm Permissible table load: 250 kg Distance table – spindle nose: 0 – 605 mm Feed rate X/Y: 1 – 2000 mm/min Feed rate Z: 1 – 1200 mm/min Tool quick-change system: SF 32 Stepless speed range: 9200 rpm Drive power: 5 kW Required space (W x D x H): 1850 x 2550 x 2400 mm Ijdpfx Aoyvrfdobcjtd

Condition: used, Universal Tool Milling Machine with Digital Readout DECKEL Type FP 1 Universal Milling Machine Machine No.: 2102 - 3322 Year of manufacture: 1986 Travel range X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle mount: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed rate: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis active digital readout HEIDENHAIN Type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Spindle speed selectable via 2 motor speeds and 8 gearbox steps Itodpfx Asr D T Uyebcsd - Quill movement on vertical milling head: 60 mm - Vertical milling head swivels and is extendable by 100 mm horizontally - Fixed angle table 600 x 210 mm - Coolant system integrated in machine base - Separate electrical cabinet - Original chip tray for mounting on the machine base - Operating manual, electrical diagram, spare parts list included Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition

Condition: excellent (used), Numerical Control Type NC 500 (Software Tooling System) Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 8 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 Itodpfoyvrrqox Abced No. 4 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 72,2 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (X axe) of the conveyor belts The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units

Condition: used, Column Drilling Machine IXION - MAXION Type Unimax 3 Serial No. 203063 Year of manufacture: 2009 Drilling capacity: 30 mm Spindle taper: MK 3 – short quill Throat: 260 mm Quill stroke: 125 mm Table size: 360 x 500 mm Column diameter: 110 mm Spindle speed: 80 - 3200 rpm, infinitely variable Motor power: 0.8 / 1.5 kW Power supply: 400 Volt, 50 Hz - Spindle speed adjustable via 2 V-belt stages, 2 motor speeds and stepless variator drive - Digital speed display - Motor speed setting 1 for clockwise and counter-clockwise operation, setting 2 for clockwise operation only - Drill table height adjustment via hand crank - Drill chuck RÖHM Ø 1 to 16 mm - Emergency stop button Required space (L x W x H): 800 x 530 x 1800 mm Weight: 230 kg Itodpfx Abeykca Tecjd Very good condition

Condition: used, Drilling and Tapping Machine FLOTT Model TBZ 15 GL Serial No. 32177027 Year of Manufacture: 1986 Drilling capacity: 15 mm Spindle taper: MT2 Throat depth: 195 mm Quill stroke: 80 mm Table size: 275 x 200 mm Column diameter: 70 mm Spindle speed: 80 - 4500 rpm, 18 steps Motor power: 0.55 + 0.75 kW Itsdpodzp S Nofx Abcsd Power connection: 380 Volt, 50 Hz - Spindle speed selection via 2 motor speeds, 6 belt steps from the motor and 2 belt steps to the spindle - Drilling head height adjustment via crank and rack on the column - Tapping device with guide bush and selector for right- and left-hand threads - 3 guide bushes for right-hand threads: 0.7 mm, 0.8 mm, and 28G included - Tapping possible with or without guide bush - 1 geared drill chuck Ø 1.5 to 13 mm - Foot switch for cycle start - Emergency stop - Original metal base included Space requirements (L x W x H): 700 x 350 x 1850 mm Weight: 165 kg Good condition

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, High-precision drilling and milling machine Fehlmann model Picomax 54 Heidenhain TNC 310 very good condition Technical Data: >> Year of construction: 2001 >> Travel X/Y/Z 500/ 250/ 160 mm >> Travel distance W 480 mm >> Clamping surface (L x W) 885 x 320 mm >> Permissible table load 250 kg >> Distance table - spindle nose 0 - 605 mm >> Feed speed X/Y 1 - 2000 mm/min >> Feed speed Z 1 - 1200 mm/min Isdpfjukf Ncex Abcstd >> Tool quick-change system SF 32 >> Speed range infinitely variable 9200 rpm >> Drive power 5 kW >> Space requirement (W x D x H) 1850 x 2550 x 2400 mm About the machine : We offer a high-precision drilling and milling machine Fehlmann model Picomax 54 in very good condition. It has a Heidenhain TNC 310 contouring control. The program creation in the user-friendly Heidenhain plain text dialog is particularly easy. HEIDENHAIN TNCs are workshop-oriented contouring controls with which you can program conventional milling and drilling operations directly on the machine in easy-to-understand plain-language dialog. The machine runs very smoothly at maximum speeds. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, High-precision drilling and milling machine Fehlmann model Picomax 54 Heidenhain TNC 310 Very good condition Technical specifications: >> Year of manufacture: 2000, Machine no. 14000258 >> Travel range X/Y/Z: 500 / 250 / 160 mm >> Travel range W: 480 mm >> Clamping surface (L x W): 885 x 320 mm Itodpfx Abeyu Snzocsd >> Permissible table load: 250 kg >> Distance table to spindle nose: 0 – 605 mm >> Feed rate X/Y: 1 – 2000 mm/min >> Feed rate Z: 1 – 1200 mm/min >> Tool quick-change system SF 32 >> Infinitely variable spindle speed: up to 9200 rpm >> Drive power: 5 kW >> Footprint (W x D x H): 1850 x 2550 x 2400 mm Accessories: >> Tool holders >> Heidenhain probe >> Operating manual, electrical diagrams, machine books About the machine: Offered here is a high-precision drilling and milling machine, Fehlmann model Picomax 54, in very good condition. It is equipped with a Heidenhain TNC 310 contouring control. Program creation is particularly easy thanks to the user-friendly Heidenhain plain text dialog. HEIDENHAIN TNCs are workshop-oriented contouring controls that enable conventional milling and drilling operations to be programmed directly at the machine using the easily understood plain text dialog. Even at maximum spindle speeds, the machine runs very smoothly. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.

Condition: ready for operation (used), Year of construction: 1984, Horizontal Boring Machine Wotan C 105 D Spindle diameter: 105 mm X-axis travel: 2000 mm Y-axis travel: 1500 mm Ijdpsytf Ifefx Abcetd Z-axis travel: 1400 mm W-axis travel: 1300 mm Rotary table: 1300x1150 mm

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 580 mm, feed length Y-axis: 200 mm, feed length Z-axis: 130 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 130 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 100 rpm, spindle mount: MK 4, throat depth: 286 mm, quill diameter: 130 mm, quill travel distance: 130 mm, type of input current: three-phase, total length: 860 mm, total height: 1,200 mm, table width: 240 mm, input voltage: 400 V, total width: 740 mm, table length: 800 mm, drilling capacity: 45 mm, position of the milling head: ±90°, drilling depth: 130 mm, workpiece weight (max.): 375 kg, distance table to spindle center: 450 mm, Equipment: documentation/manual, rotational speed infinitely variable, Drilling and Milling Machine ZX7045B VARIO – professional metalworking machine The ZX7045B VARIO drilling and milling machine is a solid and versatile machine designed for professional metalworking in workshops, production plants and tool rooms. The machine allows drilling, milling and tapping operations, making it a universal solution for many machining applications. The machine is equipped with a powerful 2.2 kW motor and infinitely variable spindle speed control in the range of 100–3200 rpm. The spindle is mounted on precision bearings ensuring high machining accuracy, while the gear transmission operating in an oil bath guarantees durability and quiet operation. The head can be adjusted in height and tilted ±45°, allowing machining at various angles. The automatic spindle feed and automatic spindle reverse during tapping significantly improve operator convenience. A large worktable measuring 800 × 240 mm with T-slots allows stable clamping of workpieces. The heavy-duty construction and base ensure high stability during operation. The machine is also equipped with a cooling system and an emergency stop switch. Technical specification Parameter Value Model ZX7045B VARIO Max drilling capacity 45 mm Max face milling diameter 80 mm Max vertical milling diameter 32 mm Max tapping capacity M12 Spindle taper MT4 Spindle travel 130 mm Spindle speed 100 – 3200 rpm Speed control variable Max distance spindle–table 450 mm Distance spindle axis–column 286 mm Table travel X 580 mm Table travel Y 200 mm Table size 800 × 240 mm Head tilting ±45° Motor power 2.2 kW Iedpjyvh Hqjfx Abcotd Power supply 400 V Machine dimensions 860 × 740 × 1200 mm Weight 375 kg Delivery to the customer is possible. Shipping cost is calculated individually by the transport company. If you are interested in other machines, please visit our website.

Condition: good (used), Year of construction: 2003, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine configuration • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device Dimensions and Travel Ranges Tool holder SK 40 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill travel (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle lower edge – table top min mm 70 / max mm 680 Distance spindle lower edge – floor min mm 970 / max mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacities Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 @ 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis AC servo motor kW 0.25 Y-axis AC servo motor kW 0.25 Z-axis AC servo motor kW 4.50 W-axis AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feed rate stepless mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Itsdpfeyuqmiox Abcsd Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, values absolute or incremental Units: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions by machining operation, material-dependent cutting data suggestions Tool management: up to 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X,Y,Z axes, program re-start with selectable functions for targeted entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - arbitrarily mounted rectangular parts - arbitrarily mounted round parts - alignment of cast and flame-cut parts - angular position detection for round parts by probing reference edges or surfaces Test graphic: Graphical display of drilling patterns.

Condition: excellent (used), CATALOG NO. 7911 TECHNICAL DATA - Number of spindles: 29 pcs - Distance between outermost spindles: 900 mm - Spindle pitch: 32 mm - Table surface: 700x1220 mm - Table height: 930 mm - Pneumatic clamps: 3 pcs - Drilling vertically, horizontally, and at an angle - Vertical/horizontal operation – pneumatic table adjustment - Pneumatic lifting of drilling head - Dimensions (L/W/H): 1400/1050/1400 mm - Weight: 744 kg ADVANTAGES – Manufactured by Italian brand SCM – For 29 drills – Not repainted – Very good condition – Used drilling machine Net price: 5,900 PLN Net price: 1,400 EUR at an exchange rate of 4.2 EUR Iedpeyrr I Nsfx Abcetd (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7908 TECHNICAL SPECIFICATIONS - Tool diameter, Wescott chuck 0-20mm - Max hole depth 155mm - Max milling length 250mm - Drill unit adjustment front/back, right/left + angle - Table adjustment up/down - Table swivel angle 0-45˚ - Working table dimensions 600x320mm - Four-point head 16-22-25-32mm - Material clamps 2 pcs Iodpfxeyrr D Rs Abcstd - Motor power 2.2kW - Dimensions (L/W/H) 1050x800x1250mm - Weight 200kg ADVANTAGES – German-made – Very good condition – Eccentric clamps, 2 pcs – Not repainted – Used drilling machine Net price: 6,500 PLN Net price: 1,550 EUR based on rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, Empty weight: 4.200 kg - Documentation available: Yes - CE certificate present: No - Control: Conventional - Motor power: 2.0kW - Transport weight [kg]: 4200kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Iedpfx Abjwnifrjcetd Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, feed length Z-axis: 1,500 mm, spindle diameter: 130 mm, table load: 25,000 kg, table length: 2,200 mm, table width: 2,200 mm, overall weight: 36,000 kg, power: 37 kW (50.31 HP), We are offering this TOS HULIN WD130A boring machine from 1998 in very good condition. Manufacturer: TOS HULIN Model: WD130A Year of Manufacture: 1998 Condition: Very good Machine Type: Boring Machine Itsdpfx Ajymmgpobcsd If you have any questions or require further information, you can send us a message or call us.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1595 € 23 mm 19 mm Weldon 1.6 kW M20 266 mm 259 mm 500 mm 17 kg 23 mm 50 mm 75 mm 190 mm 160 - 250 / 390 - 580 U/min 8 mm The PRO-52T drilling machine is suitable for hole cutting and tapping applications. Powerful variable speed motor enables milling capacity up to 50mm (2”) and drilling capacity up to 23 mm (7/8”). Machine’s forward & reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system. Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel gradeor tool quality. Intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. Features and benefits: • powerful motor with heavy duty 2-speed gearbox • Electronic Speed Stabilization System (ESSS) maintains stable speed regardless of load changes • tapping of through and blind holes • milling with TCT or HSS cutters or drilling • electronic clutch • both overload and overheat protection • rigid design extends tool life • tilt sensor stops the motor if machine breaks away • 360-degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes • innovative smart magnet with reduced weight • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Energy Saving Base (ESB) uses only 50% of its power when motor is not running • Semi-automatic gib adjustment enables simple, fast, correct and repeatable slide backlash Settings without any expert knowledge or experience • intuitive control panel at top of the drill Ijdpfjyrht Iex Abcotd • large coolant container Standard shipping set: • Drilling machine • Plastic box • Handle (3 pcs) • MT2 arbor with 19 mm (3/4”)Weldon tool holder • Safety strap • Cooling system • Protective spring for cooling hose • MT2 drift • 6 mm hex wrench • 5 mm hex wrench with a handle • 2.5 mm hex wrench • 8 mm combination wrench • Tool can • Operator’s Manual OPTIONS (PRICES ON REQUEST): Pressure cooling system 2 lt Vacuumpad Compressed air ecjector Pipe attachement

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 2595 € 12 mm 19 mm Weldon 0.4 kW 361 mm 238 mm 352 mm 145 kg 12 mm 36 mm 50 mm 70 mm 260 U/min 6 mm This special design battery-operated drilling machine equipped with permanent magnetic base is dedicated to operate in remote areas, where no power supply is available. The base includes very strong neodymium magnets and does not require any electricity to operate. PRO-36 PM Battery is equipped with LED monitoring system that generates signals in green and red colors to indicate the current status of the drill and provide safety information. The drill can be used with convex (min diameter - 80 mm) and concave (min diameter 1000 mm) materials. Up to 47 holes fi 20 mm in 10 mm thick plate can be made when PRO-36 PM Battery is equipped with CAS LiHD 10.0 Ah battery pack. Features and benefits: • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • tilt sensor stops the motor if machine breaks away • control panel is equipped with so called „vandal resistant” illuminated start/stop motor buttons. Standard shipping set: • Cordless Drilling Machine with coolant container • Plastic Box • Battery 4.0 Ah • Handle (3 pcs) • Safety strap • Allen wrench hex s=4 with handle • Operator’s Manual Itjdpfx Abeyrhtnjcod OPTIONS (PRICES ON REQUEST): Battery charger Pressure cooling system Vacuumpad Vacuumpump Compressed air ejector

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1995 € 25 mm 19 mm Weldon 1.6 kW M20 266 mm Itodpfx Abeyrhrwecsd 259 mm 505 mm 18 kg 25 mm 70 mm 75 mm 190 mm 120-190 / 290-450 U/min 8 mm The PRO-72T drilling machine is suitable for hole cutting and tapping applications. Powerful variable speed motor enables milling capacity up to 70 mm (2-3/4”) and drilling capacity up to 25 mm (1”). Machine’s forward & reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system. Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel grade or tool type. Intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. Features and benefits: • powerful motor with heavy duty 2-speed gearbox • Electronic Speed Stabilization System (ESSS) maintains stable speed regardless of load changes • tapping of through and blind holes • milling with TCT or HSS cutters or drilling • electronic clutch • both overload and overheat protection • rigid design extends tool life • tilt sensor stops the motor if machine breaks away • 360-degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes • innovative smart magnet with reduced weight • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Energy Saving Base(ESB) uses only 50% of its power when motor is not running • Semi-automatic gib adjustment enables simple, fast, correct and repeatable slide backlash settings without any expert knowledge or experience • intuitive control panel at top of the drill • large coolant container Standard shipping set: • Drilling machine • Plastic box • Handle (3 pcs) • MT3 arbor with 19 mm (3/4”) Weldon tool holder • Safety strap • Cooling system • Protective spring for cooling hose • MT2 drift • 5 mm hex wrench with a handle • 4 mm hex wrench • 2.5 mm hex wrench • 8 mm combination wrench • Operator’s Manual OPTIONS (PREISE AUF ANFRAGE): Pressure cooling system Pipe adjustment

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1695 € 12 mm 19 mm Weldon 0.45 kW 316 mm 235 mm 328 mm 115 kg 12 mm 36 mm 50 mm 70 mm 260 U/min 6 mm The PRO-36 Battery is a drilling machine designed to drill holes of diameters up to 36 mm (1 7/16”) by using annular cutters. The machine can also drill holes of diameters up to 12 mm (0.47”) by using twist drill bits. Cordless drill is equipped with LED monitoring system that generates signals in green and red colours to indicate current condition of the drill and give safety information. Control panel is equipped with so called „vandal resistant” illuminated start/stop switches (green/red) Features and benefits: Itedpfjyrhqtex Abcjd • LED Monitoring System indicates current condition of the drill and gives safety information • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • Tilt sensor stops the motor if machine breaks away • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Energy Saving Base(ESB) uses only 50% of its power when motor is not running • innovative smart magnet with reduced weight Standard shipping set: • Cordless drilling machine • Plastic box • Battery 4.0 Ah • Handle (3 pcs) • Safety strap • Cooling system • 4 mm hex wrench with a handle • Operator’s Manual OPTIONAL EQUIPMENT (PRICES ON REQUEST): Battery charger Pipe attachment Pressure cooling system Vacuum pad Vaccum pump Compressed air ejecto

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 595 € 12 mm 19 mm Weldon 0.1 kW 175 mm 250 mm 312 mm 10 kg 12 mm 36 mm 51 mm 70 mm 350 U/min The PRO-36 makes holes up to 36 mm in diameter by using annular cutters. The machine can also drill holes up to 12 mm in diameter by means of twist drill bits with Weldon shank 19mm (3/4’’). Compact design and excellent ratio weight/power make this mag drill a very popular choice for customers. Features & benefits: • Dual bars guide system ensures extraordinary stiffness and adjustment free operation • Compact size and ultra-lightweight - ideal for site work • Rugged one piece slide and gear box for extra stability • Purpose designed motor with heavy duty gear box • Maintenance-friendly design makes it easy to use • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials Itedjyrhqmopfx Abcod • Magnetic Power Adhesion Control (MPAC) detects adhesive force of electromagnetic base and protects both the machine and theoperator from work on too thin work piece Standard shipping set: • Magnetic Base Drilling Machine • Plastic Box • Swarf Shield/Cutter Guard • Coolant Bottle Assembly • Safety Chain with Snap Hook • Allen wrench hex s=4 • Operator’s Manual • Standard shipping weight - 16,7 kg (36 lbs OPTIONS (PRICES ON REQUEST): Coolant system 2 lt Vacuumpad Compressed air ejector Pipe attachment

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 995 € 23 mm 19 mm Weldon 1.15 kW 331 mm 254 mm 456 mm 155 kg 23 mm 50 mm 50 mm 160 mm 240 / 480 U/min 6 mm PRO-50 featuring purpose designed motor and 2-speed gear box 240/480 rpm is optimized to provide appropriate speed for work with HSS cutters up to ? 45 mm and twist drills up to ? 23 mm. Rigid construction, optimized by means of FEA (finite element analysis) software extends tool life and enables depth of cut up to 75 mm. Compact design along with innovative smart magnet with reduced weight make it a lightweight machine. PRO-50 provides maximum holding power on thin materials thanks to Magnetic Field Shape Control (MFSC). The drill protects both the machine and the operator from work on too thin work piece by means of Magnetic Power Adhesion Control (MPAC). PRO-50 is also equipped with Energy Saving Base (ESB) that uses only 50% of its power when motor is not running. Features and benefits: • Compact design with excellent ratio weight/power • Purpose designed motor • Motor Speeds 240/480 rpm (under load) • Spindle equipped with MT2 • Innovative smart magnet with reduced weight • Rigid design to extend tool life • Large stroke enables the use of long tools • Motor cable with additional protective cover • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Magnetic Power Adhesion Control (MPAC) detects adhesive force of electromagnetic base and protects both the machine and the operator from work on too thin work piece • Energy Saving Base (ESB) uses only 50% of its power when motor is not running Standard shipping set: • Drilling machine • Plastic box • Handle (3pcs) Itodpfxoyrhp No Abced • MT2 arbor with 19 mm (3/4”) Weldon tool holder • Safety strap • Cooling system • Protective spring for cooling system hose • MT2 drift • 2.5 mm hex wrench • 5 mm hex wrench • 5 mm hex wrench with a handle • 8 mm combination wrench • Operator’s manual OPTIONS (PRICES ON REQUEST): Pipe adjustment Pressure cooling system Vacuumpad Vackuumpump Compressed air ejector