Used Pre-Coated for sale (45,706)

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: limited functionality, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), empty load weight: 4,000 kg, volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h Kdodpfju Thh Eex Aabeu bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating ins3.641tructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2006, High pressure gas used tube semi trailer for helium, hydrogen, oxygen, nitrogen, argon, methan, CNG Semi trailer SCHMITZ year 2006 Tare 7900 kg Bottles: Volume 17400 liters Working pressure 200 bar Tare 16750 kg Kedpfx Aaev N Ex Ssbedu We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be happy to provide you with a quotation or give you more information about other pressure vessels. To discuss the possibilities, please contact us by phone or e-mail.

Condition: used, Year of construction: 2018, x-travel 1.020 mm y-travel 510 mm z-travel 560 mm CNC-control Sinumerik 828 D SIEMENS table-size 1200 x 500 mm max. table load 500 kg spindle taper SK 40 spindle turning speed range 12.000 U/min feed stepless 10.000 mm/min rapid traverse 36/36/36 m/min drive capacity - spindle motor 9 kW tool change unit 30 Pos. coolant IKZ Kdsdjxdvd Rjpfx Aabju voltage 400 V total power requirement 40 kVA weight of the machine ca. 5,5 t dimensions of the machine ca. 2,90 x 2,10 x 2,65 m chip conveyor 3,30 x 0,45 x 1,30 m coolant tank 3,50 x 2,40 x 0,40 m - Serial-No.: 180308 - Machine ON: 5,555 h - Spindle ON: 3,318 h - Control system: SIEMENS Sinumerik 828 D - Electric handwheel - Chip conveyor - IKZ - Linear guides

Condition: used, Year of construction: 2010, operating hours: 75,774 h, functionality: fully functional, Used Mark compressor with dryer. Used, in working condition. Available at the end of July 2025. Kdjdpfx Aaswprviobou

Year of construction: 2021, condition: excellent (used), We offer a countertop autoclave in very good condition. Autoclave Prestige Medical 12L, sterilization temp 121 stC Year of production: 2021 Brand: PrestigeMedical Model: Classic Extended Media Ksdpfx Ajumth Seabsdu Personal collection from Gadansk (Poland, Poland)

Year of construction: 2023, operating hours: 109 h, condition: like new (used), functionality: fully functional, High-performance extraction unit for aluminium chips MG 9V Centrifugal fan with soundproofed housing, M-class filter, chips fall downwards into a customer-supplied container, max. drop height 1,100 mm Drive: 4.0 kW, 400 V, 50 Hz, max. air volume flow 4,000 m3/h, noise level below 80 dB(A), selector switch for continuous operation or control via the saw. Equipped with 2 connection nozzles D160 mm, dimensions when assembled: 1825 x 1140 x 4675 mm, finish RAL 9016 Ksdexmhkbepfx Aabedu

Condition: good (used), Year of construction: 2015, operating hours: 19,173 h, functionality: fully functional, pressing force: 150 t, filling opening width: 1,100 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 35,800 kg, oil tank capacity: 4,300 l, Technical data baler: Manufacturer Europress Umwelttechnik GmbH, Germany Type EP5 150 V5 Year of construction 2015 Operating hours 19,173 hours Number of pressed bales 282,961 bales Number of press strokes from the press ram 1,895,112 press strokes Pressing force of main press 150 t Specific pressing force 181.8 N/cm² Dimensions of feed chute 1,000 x 2,000 mm (w x l) Bale dimensions 750 x 1,100 mm (h x w), length variable Drive power 2 x 55 kW + 15 kW + 2 x 0.75 kW Rated current 230 A Cable cross-section supply 120 mm² Tying 5-fold vertical, fully automatic Hydraulic oil tank capacity 4,300 l PLC control Siemens S7 / ET200S Transport weight press 35,800 kg Special equipment: Kjdpfx Aaju Thfdebsdu Base plates and side walls made of HARDOX steel Free tamper in front of the counter blade, with cleaning cycle Scope of delivery: 1 piece baler 1 piece control cabinet 1 set of oil collecting pans under the baler 1 piece maintenance platform on the baling channel 1 piece Feed hopper 1 piece Drop chute 10 pieces wire reel stands 2 pieces wire drawing stations with deflection rollers 1 set of machine documentation (operating instructions, electrical circuit diagram, hydraulic circuit diagram, CE confirmation) Remarks: The machine is still completely assembled and available at short notice. Dismantling and loading is the responsibility of the buyer. The documentation (operating instructions, electrical circuit diagram, hydraulic circuit diagram, CE confirmation declaration) is available in German. An inspection is possible by arrangement. We do not assume any liability for the technical data and possible errors.

Year of construction: 2010, condition: excellent (used), Clamping pressure tester make Prema max.pressure 100 MPa Clamping - diameter 220 mm Kedpfx Ajfd Enceabodu Weight 12 kg

Year of construction: 2011, condition: used, Toxi Press TOX-Clinch-unit TZ including EPMR-drive & electrical cabinet very good condition Robot tool Typ:  TZ 05.422289 weight: 121kg Max Kraft 52kN complete system Typ: STE 606-006-125 3,4kW 125 mm/s power 400V Press Typ: EPMR 055.034.100.000 including Schematic diagramm You get everything as shown. Including electrical cabinet. Attention: the cables to connect the clinch unit and the electrical cabinet are not included Kdjdpfxedq E Eio Aabeu

Year of construction: 1984, condition: used, Corner connector machinePressta 7000 type PV 7 Kdodpfsi Dx A Eex Aabju

Condition: like new (used), For sale is a lot of high-quality aluminum industrial profiles with large cross-sections. The profiles are as new & unused, making them ideal for applications in mechanical and plant engineering, fixture construction, frame building, or hall construction. Technical data: Quantity: 30 pieces of 5.27 m each + 1 piece of 4.04 m Cross-section: 130 mm x 50 mm Total length: 161.14 m Material: aluminum extruded profiles Total weight: approx. 725 kg Kdedsxbyx Hspfx Aabju Profile type: T-slot profile / construction profile / industrial profile (solid, multi-chamber) Features: Highly stable and torsion-resistant Lightweight and easy to process Corrosion-resistant Ideal for load-bearing structures Condition: As new / unused Minor storage marks possible Logistics: Goods bundled on pallets Collection by arrangement possible Shipping available on request for an additional charge

Condition: like new (used), Year of construction: 2024, operating hours: 9 h, functionality: fully functional, machine/vehicle number: 190551920245099737, saw blade diameter: 500 mm, We are selling a saw-drilling-threading automation machine, Profilma 540 BG, designed for cutting to length, drilling, and threading of aluminium profiles. This is a special-purpose machine that was purchased for the production of solar components. The scope of delivery includes: - Roller conveyor RD500, length 6000 mm - Pre-installation for chip extraction MG9 - Database for storing cutting data under profile number - 32 pcs combined machine taps M8x1.25 Kedpfxexmhhge Aabsdu - 2 pcs carbide saw blades 500x3 mm The machine has only 9 operating hours.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2011 (38.761 h), 2007 (52.386 h), 2007 (52.998 h) und 2007 (55.325 h) stand operating hours counter November 2021 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: Kdsdpfx Aaeu Tha Iebju The four PZA cardboard shredders were in use in a Dutch logistics centre until 15 December 2021 to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 4 pieces Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredders were an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machines are in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, TECHNICAL SPECIFICATIONS: Press Model: T50 CNR4 Year of manufacture: 1999 Nominal force: 500 kN Weight: 3,500 kg Strokes per minute: 90 Max. insertions per minute: 41 Operating air pressure min./max.: 4–5.5 BAR Stopping time: 0.117 s Safety distance: 187 mm Energy: 2000 KJ Adjustable stroke min./max.: 8–100 mm Ram adjustment: 70 mm High setting B.D.C.: 280 mm Max. extraction stroke: 30 mm Table surface: 770x530x58 mm Ram table dimensions: 450x300 mm Table to ram distance: 275 mm Shank diameter: 45 mm Throat depth: 270 mm Max. die dimensions: 450x300 mm Upper die weight: 84 kg Voltage: 400 V Hydraulic overload protection Supplied with user manual and CE compliance Six (6) month warranty excluding electronic parts NEW COMPONENTS INSTALLED: Kodpfxexgqrhe Aabedu • Swivel joint bearings • Flywheel bearings • Air regulator • Clutch • Electrical panel • Complete safety guards • Foot pedal • Hydraulic overload pump pressure gauge

Condition: excellent (used), For sale: Complete set of ATORN Germany tool holders – high quality, premium brand Hahn+Kolb. Technical specifications: Kedpfx Aasw Ulraobedu • Manufacturer: ATORN • Model: 20723200 • Standard: DIN 69871 SK40-1/10-100 • Length: 100 mm • Set includes: several pieces, some with mounted drills (see photos) Condition: Very good, practically stored as new. Only used for testing, no operational wear. Suitable for CNC machining centers and milling machines. - Price per piece.

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Ksdpfx Aaou D Tz Uebodu Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 pieces available, price per piece

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 14C1001Y, Automatic Bag Making Machine – industrial equipment for producing paper bags with a polyethylene layer, through automatic cutting and sealing. Ensures high productivity, shape and dimensional accuracy, making it ideal for durable and eco-friendly packaging suitable for the food and commercial industries. Kodpfjxcxk Rex Aabsdu

Condition: like new (used), Year of construction: 2024, operating hours: 190 h, functionality: fully functional, machine/vehicle number: 190551920245099676, saw blade diameter: 500 mm, We are selling a saw automatic saw-punching solution Profilma 502ST-V for cutting to length and punching aluminium profiles. This is a special-purpose machine that was acquired for the production of solar mid clamps. Kdsdpfx Aoxmhf Eeabou

Year of construction: 2005, condition: excellent (used), machine/vehicle number: AAC02761-0502-6018 REV 3, Speed: up to 17 p / h Counter: 17.067 plates Format (mm): max. 560 x 576 // min. 240 x 240 Equipment / Additional information: - Dust extractor - Plate gumming device Kodpfx Ash N Dwusabsdu - Destacker - RIP

Condition: good (used), . Technical data . Pressing force 30 t Stroke 100 - 600 mm Ram stroke, adjustable 8 - 40 mm Installation height 200 mm . Various reels in stock up to 300 kg . . Ongoing purchase of used German machines without NV or CNC control Kdjdpfx Aoxa Ef Asabju

Condition: ready for operation (used), functionality: fully functional, container length: 40 ft, 40-foot HighCube / sea container / XXX ✅ You always get dealer prices from us! ✅ We offer used 40-foot HighCube storage containers / sea containers. Details: - Model: 40ft-HC, storage container / sea container made of steel (used) - Condition: ◦ Wind and watertight Kdsdpfx Aajwu Tk Eebeu ◦ Cargo worthy (suitable for international transport) ◦ Repaired and ready for immediate use ◦ With valid CSC sticker (comparable to a TÜV sticker) - Equipment: ◦ Wooden floor Additional services: - Individual adaptations as required (e.g. conversions or specific adaptations) - Fast delivery directly to your location - Delivery & unloading possible nationwide and internationally (for an additional charge) Simply send us the zip code of the delivery address. Prices on request! We will be happy to provide you with a customized offer. For further questions or advice, please call us.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 5536, pressing force: 50 t, filling opening width: 1,252 mm, filling opening length: 1,100 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 500 kg, total width: 3,000 mm, total height: 3,000 mm, total length: 9,500 mm, feed length X-axis: 1,200 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 1,200 mm, type of input current: three-phase, input voltage: 400 V, input current: 100 A, overall weight: 16,000 kg, noise level: 80 dB, pressure: 250 bar, pressure (max.): 250 bar, opening width: 1,100 mm, control cabinet height: 1,700 mm, control cabinet width: 700 mm, control cabinet length: 900 mm, oil tank capacity: 600 l, power: 45 kW (61.18 HP), empty load weight: 16,000 kg, volume flow: 16,000 m³/h, operating pressure: 200 bar, transport width: 3,000 mm, protection type (IP code): IP55, Equipment: compressor, documentation/manual, Presona LP50VH3, and as a bonus, you also get the Presona PP1500-500. The PP1500-500 is actually an auxiliary device used for specific tasks, such as precise cutting or additional processing of material, which the base machine itself does not handle. So the PP1500-500 is there to allow you to perform additional specialized operations that the main machine cannot do. Kjdpfjxfr Aljx Aabjdu

Condition: like new (used), pressing force: 70 t, – Capacity 1600 x 70 tons – NC control (touchscreen) – 2 hydraulic cylinders – Foot control – Photoelectric safety guard – Emergency stop – Relief Kodpjr Rtb Usfx Aabsdu – Documentation – 400V

Condition: reconditioned (used), Year of construction: 2013, Presto HAN10 Kjdped Hy Enjfx Aabodu Usable volume: 10cbm Filling opening: 1300x1500mm Machines are repaired, serviced, tested and sold painted in standard RAL. NEW: Polyamide, hydraulic hoses, oil & filters Images are reference images of machines we manufacture. We would be happy to make you an offer including delivery.

Condition: excellent (used), machine/vehicle number: PA-399, Format: A3 Paper format: ca 31x45cm Ksdpfx Aajh Eh U Robsdu