Used Pre-Coated for sale (45,664)

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced Chodex Dnb Ujpfx Addof • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), functionality: fully functional, General information: Oil-lubricated screw compressor for compressed air supply. Technical data: Drive motor: 5.5 kW Max. operating overpressure: 8.0 bar Rated speed: 2950 rpm Operating voltage: 400 V, 3-phase, 50 Hz Rated current: 14 A Ambient temperature: 3–45 °C Option: K1_T2_C48 Refrigeration dryer: Model: ABT 15 Material no.: 1.8102.5 Max. operating overpressure PS: 16 bar / 230 psig Csdpfxjxzuhcj Addshf Compressed air inlet temperature: 3–60 °C / 37–140 °F Ambient temperature: 3–45 °C / 37–115 °F Refrigerant system: Refrigerant: R-513A Quantity: 0.35 kg / 0.77 lb Global warming potential (GWP): 631 CO₂ equivalent: 0.221 t / 487 lb Max. operating overpressure HP PS: 21 bar / 300 psig Max. operating overpressure LP PS: 16 bar / 230 psi No options

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Canon imagePRESS C9010 VP’ Object of sale: 1 x Canon imagePRESS C9010 VP with the following equipment: incl. Prisma Controller or Fiery incl. booklet finisher N2 incl. High Capacity Stacker H-1 incl. POD Deck D1 Counter readings: Total: Approx. 1,880,920 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: Chsdpfx Adsu Ecl Ejdef You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information you can of course also contact us personally.

Condition: used, Max. punching force: 100 kN Adjustable stroke, max. 50 mm Chsdpfoxrmz Aox Addjf Stroke activation via foot switch Weight: approx. 600 kg

Condition: ready for operation (used), 20-ft. Container Condition: Used, Cargo worthy, 12 months valid CSC, Wind-and watertight, Chjdsg Sxkgepfx Addef Free on Truck Depot HAMBURG

Condition: used, Specac Specac Atlas 15T Laboratory Press with Temperature Controller, Heating Plates, and Film-Making Set Description: For sale is a complete Specac system for laboratory sample preparation. This set is particularly suitable for the production of pellets, thin films, and other samples for FTIR or materials analysis. The system includes the following devices: - Specac Atlas™ Manual Hydraulic Press (15 tons) - Specac 4000 Series™ Temperature Controller - Specac Atlas™ Heating Plates - Specac Constant Thickness Film Maker accessory set in a transport case - All relevant manuals and the original quality certificate The equipment comes from a laboratory and is in perfect technical condition. The visual condition is very good with only minor signs of use. Technical Specifications Specac Temperature Controller - Model: 4000 Series - Operating voltage: 230 V - Frequency: 50 Hz - Maximum power consumption: 1800 W - Fuse: 7 A Specac Atlas Manual Press - Maximum pressing force: 15 tons - Robust metal construction - Integrated pressure gauge - Suitable for the preparation of laboratory pellets Specac Heating Plates - Temperature-controlled sample heating - Direct connection to temperature controller Film-Making Set - Complete accessory case Chodpfx Adjx A T T Hsdof - For producing uniform sheets/films - Various inserts and tools included Scope of delivery - Atlas 15T laboratory press - 4000 Series temperature controller - Heating plates - Film-making set in case - Connection cables - Original manuals - Quality certificate (Specac, 2014) Important Note: “The table shown in the photos is not included in the sale.” Condition: Used (Specifications and details are subject to change and may contain errors!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), Device for precise setting, measurement, and inspection of CNC cutting tools. Equipped with an EZset optical camera system and EZvision (Image Controller 1) software. Condition: very good, complete, ready for operation. Technical data and features: • Model: PRECIsset 400 • Measurement system manufacturer: EZset GmbH & Co. KG, Germany • Control screen: Image Controller 1 Chedpfjxn Awxjx Addjf • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • Measuring range X / Z axes: up to 400 mm • Camera with image processing system • Edge, length, and tool diameter measurement function • Results can be saved and printed • USB and RS ports • Power supply: 12 V DC, 40 VA • Year of manufacture: approx. 2018–2019 • Supplied with original PRECITOOL technical documentation Condition: • Used, fully functional • Screen operates correctly • Longitudinal/Transverse axes reference correctly • Well-maintained unit from a German tool shop Functional description: The PRECIsset 400 enables fast and repeatable tool setup prior to CNC machining. The EZset vision system allows for blade geometry analysis and tool wear inspection. High measurement accuracy ensured by a stable column and industrial-grade optics.

Condition: excellent (used), functionality: fully functional, pneumatic clamps automatic strip feeding aggregate angle adjustment pneumatic movement of spindles slat supports Chedpfxevcb Rko Addof regulation of oscillating movement of drills regulation of feed stroke 380V power supply

Condition: like new (used), Year of construction: 2025, functionality: fully functional, With this offer, you are purchasing a used Konica Minolta AccurioPress C4070 colour production system. Item for sale: 1 x Minolta AccurioPress C4070 with the following equipment: Includes Fiery Server Pro-32 Includes Paper Deck PF-707m Includes IQ-501 Stacker LS-507 Chjdjx Dhykspfx Addsf Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 293,140 pages Colour: Approx. 216,083 pages Black: Approx. 77,057 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: good (used), functionality: fully functional, Hydraulische Pressen und Maschinenbau GmbH Hydraulic press, 70 9251 3, HES 16MP Model: 7092513 Type: HES16MP Csdpfxsumk Nao Addjhf General: Display: 0-400kp/cm2 / 0-25Mp

Condition: used, Year of construction: 1999, TOX Pressotechnik CEC 008.000 - Pneumatic Press Csdpfx Aexywtreddehf - Operated via control panel and foot pedal - Incl. accessories - Year of manufacture: 1999 Technical specifications - Capacity: 70 kN - Total stroke: 200 mm - Power stroke: 12 mm - Throat depth: 500 mm - Table dimensions (W x D): 200 x 315 mm - Air pressure: 6 bar - Voltage: 230 V - Dimensions (W x H x D): 700 x 2350 x 990 mm

Condition: excellent (used), Compressor CompAir L 75 operating hours approx. 3100 h (load hours) was used as reserve compressor volume flow 10,25 m³/min Motor power 75 kW Codpfx Adoh U R Rwjdjhf Very good working condition, directly from production!!!

Condition: good (used), Year of construction: 2014, operating hours: 7,145 h, functionality: fully functional, Baling Press Presto HPK 50 HS, Year of Manufacture 2014 Manufacturer: Presto Model: HPK 50 HS Year of manufacture: 2014 Drive: 30 kW Pressing force: 50 t Codexzz U Aepfx Addshf Operating hours: 7,145 Filling opening: 1,600 x 650 mm (L x W) Channel cross-section: 700 x 950 mm Max. filling volume: 1.06 m³ Cycle time: 20 s Tying: 4-fold Throughput capacity at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8,420 x 1,900 x 2,400 mm (L x W x H) Machine weight: approx. 10,500 kg Materials: Paper, cardboard, film, PET bottles The press is in good condition and has been inspected and tested. A video can be found on our YouTube channel or our website. Note: The press has been overhauled. The knives, counter-knives, and all sliding plastics have been replaced. Please note: All technical data are based on the manufacturer's information. We assume no liability for the information provided or for possible errors. The offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by appointment. Sale is ex-works, prepayment only, without warranty or guarantee.

Condition: used, total length: 1,100 mm, total width: 3,880 mm, total height: 3,170 mm, - Documentation available: No - CE marking present: Yes - CE certificate present: No - Transport dimensions: 1100mm x 3880mm x 3170mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Chjdpfx Aowivp Hsddef Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: used, Year of construction: 2010, operating hours: 75,774 h, functionality: fully functional, Used Mark compressor with dryer. Used and in working condition. Available from December 2025. Chsdpfx Adowprvisdof

Condition: good (used), Year of construction: 1993, Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: 45° pivotable -Saw blade: Ø 500 mm Cedpfx Adetxkprodshf -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Condition: excellent (used), functionality: fully functional, Description of the device Pump motor power - 1.35 kW 10 hydraulic cylinders for pressure - spring return 17 upper hydraulic cylinders for pressing the beam Chjdpfx Adovy Uqfjdef Maximum working dimensions 7x1.5m

Condition: new, Year of construction: 2024, NEW 20- foot Container available in FRANCE Year of manufacture 2024 / 2025 with lock box Codpog S Aiusfx Addehf with fork lift pockets

Condition: excellent (used), Year of construction: 2023, saw blade diameter: 460 mm, cutting height (max.): 146 mm, TECHNICAL SPECIFICATION .. max. diameter of saw blade: 460 mm Chjdpoxzbrnsfx Addjf .. cutting capacity round: 146 mm .. cutting capacity square: 138 mm .. mitre cutting: no .. .. oblong: 250 mm .. .. .. x: 100 mm .. .. to: 220 mm/min DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2200 mm .. space requirements -front/back-: 1950 mm .. total height: 2000 mm .. total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60%

Condition: used, Year of construction: 2025, total height: 2,200 mm, total width: 800 mm, total length: 1,450 mm, Empty weight: 970 kg Price: On request Movable Press-Cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Control: Conventional - Motor power: 3.0kW - Table width: 300mm - Throat depth: 1100mm - Table length: 1500mm - Ram length: 100mm - Model: Hydraulic - Max. stroke: 380mm - Number of columns: 2 - Height adjustment: 750mm - Power: 100.0ton - Transport dimensions: 1450mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Cjdpfx Ajw N Su Deddjhf Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2025, total height: 2,200 mm, total width: 800 mm, total length: 1,100 mm, Empty weight: 540 kg Price: On request Movable pressing-cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Control: Conventional - Motor power: 2.2kW - Table width: 260mm - Throat depth: 750mm - Table length: 1000mm - Ram length: 100mm - Model: Hydraulic - Max. stroke: 380mm - Number of columns: 2 - Height adjustment: 750mm - Power: 60.0ton Cedpfx Asw N St Hoddjhf - Transport dimensions: 1100mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2025, total height: 2,100 mm, total width: 800 mm, total length: 2,200 mm, Empty weight: 1.145 kg Price: On request - Year: 2025 - Documentation available: No - CE marking present: Yes - CE certificate present: Yes - Serial number: PPW10061N2025009 - Control: Conventional - Motor power: 3.0kW - Table width: 300mm - Throat depth: 1500mm - Table length: 1500mm - Ram width: 120mm - Ram length: 120mm - Model: Hydraulic - Max. stroke: 380mm - Number of columns: 2 - Height adjustment: 750mm - Power: 100.0ton - Transport dimensions: 2200mm x 800mm x 2100mm (l x w x h) - Transport weight [kg]: 1145kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Chsdpsxb Scwsfx Addsf Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1984, total width: 1,500 mm, total length: 3,000 mm, total height: 2,000 mm, Empty weight: 2.500 kg - Year: 1984 - Documentation available: No - CE certificate present: No - Max. workpiece length [mm]: 2500 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 300 - Number of work zones [pcs]: 1 - Number of cylinders [pcs]: 4 - Cylinder diameter [mm]: 70 - Transport dimensions: 3000mm x 1500mm x 2000mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Csdpfx Adexhcg Todshf VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total width: 3,960 mm, total length: 1,600 mm, total height: 2,300 mm, Empty weight: 5.000 kg Price: On request - Documentation available: No - CE certificate present: No - Max. workpiece length [mm]: 1300 - Max. workpiece width [mm]: 3300 Cjdewnhulopfx Addohf - Number of cylinders [pcs]: 6 - Transport dimensions: 1600mm x 3960mm x 2300mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1991, High frequency press Brand: Italpresse Type: GB/13 Max pressure: 120T Pressing area 2500x1300mm Pressing height 200mm 6 cylinders diameter 90mm Speed 12m/min. Complete line with loading system, gluing machine, destacker and High frequency cabinet (separate for sale) Codpfswng Tmjx Addehf Machine needs some maintenance. Probably the PLC lost his parameters, and some small parts needs to be changed.  - Year: 1991 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels