Used Pressing Cushion for sale (12,516)

Condition: excellent (used), Year of construction: 2016, pressing force: 320 t, table width: 4,100 mm, Bystronic Xpert 320ton x 4metre cnc pressbrake Year 2016 Used high quality Bystronic Xpert 320/4100 6 axis 4 metre x 320 ton CNC down stroke hydraulic pressbrake for sale Bystronic – fully serviced with Bystronic uk as per photo Model: Xpert 320/4100 • Working length 4100mm • Max. press force 3200kn • Max stroke 265mm 320/4100 free standing CNC Pressbrake 6axis / 6 axes: Y1 – Y2 – Z1 – Z2 – X – R • Year 2016 • Complete with: Tedpervyudsfx Aired • Bystronic ByVision control • Upper and Lower Bystronic Tooling • Hydraulic upper and lower tool clamping • 4 axis back gauge • Crowning • No pit required

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Todsiidm Nepfx Airsd Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Year of construction: 2026, condition: as good as new (ex-display), Vacuum Membrane Press The VP series is the optimal solution for woodworking. The VP 3000 is equipped with heating technology, which shortens the drying time of the adhesive, thereby increasing performance. Possible applications: Veneering / Form gluing / Coating... Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of bent and laminated components The heating system is equipped with temperature control. Rubber membrane 2.5 mm Table top is made of plastic, 12 mm Oil-free Becker vacuum pump, 25 m3/h The control system for the vacuum / tank capacity is 15 l Working area: 3000x1500mm Heating system temperature: Max. 60 degrees C Heating system: 4.5 kW Pump power: 0.75 kW Vacuum pump capacity: 25 m3/h Rubber membrane Tsdpfodwh E Aox Aired External dimensions: 3100 x 1650 x 1600 mm Weight: 450 kg The machine is equipped with a chassis. Location: Available ex-stock in 54634 Bitburg - free loading -

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time Todpfodx R Tfjx Airod - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -

Year of construction: 2000, condition: good (used), Used Amada Tp150ex 150ton press / stamping machine Amada TP150 EX electric Power Press with feed Atkin Bhp feed and Atkin BHP decoiler New/year 2000 TP150 Model Amada TP-150EX Weight 16 tons Accessories Sick Guards Hydraulic Overload Tedpfx Aisn Smg Tored Variable Speed Drive Hydraulic Tool Clamping Capacity 15o tons Supplied New July 2000 Stroke 175mm Bed Area 1250 x 750 x 160mm Ram Area 700 x 550mm Ram Adjustment 100mm (motorised) Die Height 390mm Ideal for automotive or aerospace sheet metal press work New c and h frame presses also available.

Condition: excellent (used), Year of construction: 1990, input voltage: 200 V, type of input current: three-phase, pressing force: 5 t, stroke length: 150 mm, reverse speed: 360 mm/s, table width: 400 mm, table length: 340 mm, overall weight: 400 kg, working height: 385 mm, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Manufacturer JAM HYP-505H model Model year 1990 Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressure speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate Two-hand operation Tjdswin Emepfx Aired Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 74300 € 1404.27 € 100 to 4.5 mm 700 mm 1000 mm 210 mm 1 - 132 mm 58 1/min 6 90 mm 60 mm 300 mm 445 mm 7.5 kW 1650 mm 1545 mm 3011 mm Tedpfx Aewiqq Sjired 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 8 sides Pneumatic counter-balancing of the ram 7" touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Hydraulic overload protection Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations OPTIONS: vibration pads € 192,00 bolster plate € 2.580,00

Condition: excellent (used), total length: 3,500 mm, total width: 1,300 mm, overall weight: 7,000 kg, operating pressure: 300 bar, transport length: 4,350 mm, transport width: 1,600 mm, transport height: 2,350 mm, Simimpiantin Shelf Press for Veneering 3500×1300 Shelf length: 3500 mm Shelf width: 1300 mm Two loads Press with 8 cylinders Shelves heated with water from central heating Tsdpfx Aexxpgbsired Max. working pressure: 300 bar Piston diameter: 80 mm Machine weight: 7000 kg Machine dimensions: 435×160×235 cm (H)

Condition: ready for operation (used), Year of construction: 1983, BOBST SPO 1600 Max Speed 5000 per hour Year 1983 Max lenght 1075mm Max width 1580mm Fully reconditioned by Bobst 2015 Tsdpfjxcayyox Airod Central line

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, control type: CNC control, bending force (max.): 130 t, working width: 3,100 mm, number of axes: 6, Equipment: CE marking, european tool clamping system, lower tooling, safety light barrier, upper tooling, Used Amada HFE 3metre x 130ton cnc pressbrake for sale TYPE HYDRAULIC DOWNSTROKING CAPACITY 130 TONS CONTROLLED AXIS Y1, Y2, X, R1 R2 Z1 Z2 MAX BEND LENGTH 3000 MM OPEN HEIGHT 470 Todow Ugg Ejpfx Airsd YEAR 2001 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR POWER 11 KW FRONT GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING REAR INTERLOCKED FENCING TONNAGE 1300 KN APPROACH SPEED 100 MM/SEC BENDING SPEED 1 – 10 MM/SEC RETURN SPEED 1-100 MM/SEC OIL CAPACITY 110 LITRES WEIGHT 7800 KG BACK GUAGE STROKE (X AXIS) 700 MM/S MAX GUAGE 1000MM

Condition: excellent (used), Year of construction: 2001, 2 filter presses are being offered. Years of manufacture: 1999 and 2001. For details, see the nameplates. Tedpfoxbrmcjx Aired

Condition: good (used), Code: 0223 Tjdpsxmhcdefx Airjd Brand: ITALPRESSE Model: PHF Hydraulic press for curved veneers for processing seats, chair backs, benches, tables and other curved items Technical data: Platen dimensions mm 2600 x 1600 Opening between platens mm 1500 Thrust ton 100 Movement from bottom to top Motor power Hp 4

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, pressing force: 5 t, operating speed: 300 mm/s, table width: 450 mm, table length: 320 mm, throat depth: 180 mm, oil tank capacity: 9 l, overall weight: 270 kg, Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed ​​(Approach Fast Speed: 350 (mm/s) Lower Speed ​​(Under Pressure Slow Speed: 36mm/s Rise Speed ​​250 (mm/s) Working Area Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Todpovbdpyjfx Airsd Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size ​ Height (mm) 986 Width (mm) 485 Depth (mm) 920

Condition: ready for operation (used), Year of construction: 1989, Heidelberg GTOZP 52 - 696xxx serial - 1989 Front panel Alcohol dampening 35 mios Perfector Tjdpfx Aox Hrn Toirsd documents + tools

Condition: excellent (used), Figure 1 provided by the manufacturer as an example. Remaining images are original. Manufacturer: Minda Designation: Timper Press V 200 Technical data: Main pressing force from below: Number of press chambers: 2 Maximum lamella width: 270 mm Maximum glue-laminated timber length: up to 18 m Glue-laminated timber profile: straight Lateral alignment of the lamellas: included Pressing system: hydraulic Permanent pressure control: included Packaging: separate Tjdpfohtd E Asx Airod Loading/unloading: in the longitudinal direction

Condition: excellent (used), Xerox Versant 4100 Including: Fiery EX 4100 1 x OHCF (Optional Handling and Finishing) Tsdpfsychr Eex Airjd FIM (Feeder and Inserter Module) C/Z fold unit Booklet maker The machine is in perfect working order!

Condition: used, Opal Type: Opal 460 Opal 460 by ATM The Opal 460 is a fully hydraulic, water-cooled hot embedding press for embedding polished samples. The process sequence is carried out automatically. The fully automatic sliding shutter enables smooth opening and closing of the embedding area. Manufacturer: ATM Q Ness GmbH Model: OPAL 460 Operating principle: The Opal 460 is a fully hydraulic, water-cooled hot embedding press for embedding polished samples. In hot embedding, the sample is embedded in an embedding press under temperature and pressure with a plastic granulate. The advantages of the process are the high hardness of the embedding media (e.g., glass fiber reinforced) and the good gap-free embedding. Hot embedding media are available based on epoxy resin, acrylic resin, phenol resin, and graphite resin. Main application area: Tedszh D Avjpfx Airod Embedding the samples for better sample preparation for further metallographic examinations. Technical data: Press mold diameter: Ø 30 mm, Ø 50 mm Temperature range: 20 ... 200 °C Max. pressure: 310 bar Weight: ~ 40 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2011, operating hours: 32,000 h, operating speed: 9 mm/s, reverse speed: 90 mm/s, overall weight: 26,000 kg, pressing force: 400 t, table length: 4,100 mm, Equipment: CE marking, safety light barrier, High-Quality Used Bystronic XPERT 400x4100 CNC Hydraulic Press Brake For Sale Overview Available for immediate acquisition is a premium, Swiss-manufactured Bystronic XPERT 400x4100 CNC Hydraulic Press Brake. This down-stroke bending and folding machine is in exceptional condition, meticulously maintained, and fully prepared for heavy-duty precision fabrication. Key Technical Specifications: Manufacturer: Bystronic Model: XPERT 400X4100 Bending Capacity: 400 Ton Bed Length: 4100 mm (4.1 Metres) Total; 4 axis - 2 axis back gauge Configuration: Extended daylight and extended stroke for versatile, large-capacity component handling Condition and Maintenance: Status: Excellent operational condition ("Very Clean") and in full working order. Service History: This machine has been fully serviced directly by Bystronic UK, ensuring adherence to original manufacturer standards and peak performance reliability. Control System: Equipped with a modern, high-precision Swiss-made Bystronic MMC Control for streamlined programming and operation. Todpfx Aezl D Efjirod

Condition: new, functionality: fully functional, Year of construction: 2026, controller model: Estun E21, stroke length: 150 mm, throat depth: 320 mm, overall weight: 9,800 kg, total length: 3,200 mm, total width: 1,850 mm, total height: 2,690 mm, input voltage: 400 V, pressing force: 125 t, table length: 32,000 mm, table width: 2,650 mm, type of input current: three-phase, Equipment: 4th hydraulic function, CE marking, documentation/manual, safety light barrier, The Digima PBH-125X3200 hydraulic press brake is a professional machine designed for precise sheet-metal bending in manufacturing plants, metalworking workshops and companies specialising in metal fabrication. Its robust construction, high pressing force and large working area make it suitable for both individual projects and repetitive production batches. The machine provides a maximum pressing force of 125 tonnes and a working length of 3,200 mm. This makes it possible to bend long sheet-metal components and perform demanding production operations. The distance between the columns is 2,650 mm, the throat depth is 320 mm, the maximum opening is 415 mm, and the ram stroke is 150 mm. These parameters provide sufficient working space for components of various sizes and shapes. The press brake is equipped with an Estun E21 controller, which allows the operator to program bending parameters and accurately control the position of the back gauge. The system can store up to 40 machining programs, each containing a maximum of 25 working steps. Automatic reference-point searching, rapid position indexing and parameter backup functions reduce machine setup time and improve the repeatability of finished components. The hydraulically driven bending beam ensures smooth and stable movement as well as consistent application of the pressing force. The machine is powered by a 7.5 kW motor. Precision ball screws and linear guides minimise mechanical play and support accurate component positioning. A Rexroth hydraulic valve system provides reliable oil-flow control, while electrical components from Schneider Electric and Lintech increase the safety and durability of the electrical installation. The AMADA quick-clamping system enables fast tool changes and reduces preparation time between different bending operations. The standard tooling includes a multi-V die suitable for bending sheets of different thicknesses and angles, as well as a four-piece punch set made from durable tool steel. The machine is also equipped with four adjustable back-gauge fingers, which help the operator position the material accurately before bending. Side and rear safety guards equipped with limit switches protect the operator from entering the working area while the machine is in operation. Opening a guard causes the machine to stop immediately, improving safety during everyday use. Tedpfx Aiszlpanered The Digima PBH-125X3200 is a solid and versatile press brake for companies requiring high bending accuracy, repeatability and production efficiency. Its high pressing force, 3,200 mm working length, functional control system and industrial-quality components make it a reliable solution for intensive use in a professional sheet-metal processing facility.

Condition: used, total length: 4,100 mm, total width: 1,900 mm, total height: 3,000 mm, Year of manufacture: 2000 Colour: Blue Weight: 20.000 kg Price: On request - Year: 2000 Tsdpfjzmaa Iex Airod - CE marking present: Yes - Serial number: 80960 - Drive system: CNC - Control system brand: HACO - Control system type: BC50 Graphics - Power [kW]: 22.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 300 - Max. working width [mm]: 3600 - Column gap [mm]: 3100 - Throat depth [mm]: 500 - Backgauge depth [mm]: 850 - Max. stroke [mm]: 250 - Crowning system: Mechanical - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 4100mm x 1900mm x 3000mm (l x w x h) - Transport weight [kg]: 20000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Heavy-duty pneumatic gluing press with perforated sheet metal for flexible positioning of the press cylinders. One cylinder without a pressure shoe. Technical data: - Pressing area: approx. 2,800 x 1,000 mm Todpfjzryy Eox Aired - Width: 600 mm - Height: 1,800 mm - Press cylinders: 6

Condition: like new (used), functionality: fully functional, working width 3000 mm working height 2500 mm year of manufacture 1995 Todpjzn Iqwjfx Aired engine power 7 kW weight 2500 kg power supply 380 V side cylinders and gearboxes adjustable from the control panel safety switch – shear pin CE marking

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 417 h, Amada HFE M2 5012 Press Brake (2021) Manufacturer: Amada Type: HFE M2 5012 Press Brake Condition: used, currently in production Year of manufacture: 10/2020 Operating hours: 6830 h Working hours: 417 h (still in use) Pressing force (kN): 500 Todpfxezwppye Aired Press beam length (mm): 1270 Distance between machine uprights (mm): 1035 Stroke (mm): 150 Opening width without die holder (mm): 480 Overhang (mm): 100 Working height (mm): 920 Working speed (mm/sec): 15 Approach speed (mm/sec): 185 Opening speed (mm/sec): 185 Dimensions: Length (mm): 2585 Width (mm): 2190 Height (mm): 2420 Weight (kg): 3600

Condition: used, total length: 3,600 mm, total width: 2,000 mm, total height: 2,800 mm, Year of manufacture: 2001 Colour: Red Weight: 5.500 kg Price: On request - Year: 2001 - Documentation available: Yes - CE marking present: Yes - Serial number: HFE50-20LV010254 - Drive system: CNC Tsdezwvrzepfx Airjd - Control system brand: Amada - Control system type: Operateur 2 CNC - Power [kW]: 6.0 - Number of axes [pcs]: 8: Y1+Y2+X1+X2+R1+R2+Z1+Z2 - Press force [ton]: 50 - Max. working width [mm]: 2090 - Column gap [mm]: 1665 - Throat depth [mm]: 400 - Max. stroke [mm]: 350 - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 3600mm x 2000mm x 2800mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Catalog number: 7984 TECHNICAL DATA - Clamping force: hydraulic - Briquette shape: round - Briquette diameter: 70mm - Hopper diameter: 1000mm - Output: up to 10 briquettes/min, up to approx. 90 kg/hour - Automatic machine operation - Motor: 5.5kW - Dimensions (L/W/H): 1800x1200x1500mm - Weight: approx. 650kg ADVANTAGES - Made in Italy - Used briquetting machine - Unpainted - Very good condition Net price: 33900 PLN Tjdpjzwwxcjfx Airod Net price: 7884 EUR, depending on an exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)