Used Pressing Cushion for sale (10,512)

Condition: used, Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outside/inside: Ø 350/273 mm -Height: 58 mm -Number: 2x pillows available Iedpfxod Sqygs Aaboih -Price: per piece -Weight: 5.8 kg/piece

Condition: good (used), APV Cheese PrePress Type OPD 11,5 in very good condition, capacity 18.000 L. 1 piece with curd distributor. Isdpfx Asdctzleabeih Complete line with all support equipment but without lifting parts!.

Condition: used, Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 200/136 mm Iedpjd Tfq Refx Aabeih -Height: 57 mm -Number: 7x pillows available -Price: per piece -Weight: 2.6 kg/piece

Condition: used, Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions Isdpod Tfq Ujfx Aabeih -Outer/inner diameter: 200/116 mm -Height: 58 mm -Number: 10x pillows available -Price: per piece -Weight: 3.4 kg/piece

Condition: used, Pipe sealing cushion, leak sealing cushion, sealing plate, pipe sealing -Pipe sealing cushions: 23 pieces, mostly with connection pipe -Diameter: 75 to 400 mm Isdsivumhepfx Aabjih -Number/size: see photo parts list -Price/delivery: complete -Transport dimension. 1200/800/H300mm -Total weight: 95 kg

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, empty load weight: 1,720 kg, operating speed: 10,700 mm/s, roller width: 2,200 mm, TECHNICAL DETAILS Rigid material Workpiece height: max. 50.8 mm Workpiece weight: max. 34 kg/m² Roll material Iisdpfoxdiyfsx Aaboh Width: min. 900 mm – max. 2,200 mm Weight: max. 50 kg Diameter: max. 240 mm Maximum print speed: 64.2 m²/h (in express mode) MACHINE DETAILS Dimensions & Weight Dimensions: 3,080 × 2,500 mm Weight: 1,720 kg Note: The machine heads must be replaced. The seller can offer full service in this regard. The machine will be available from 02.12.2025!

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, cutting height (max.): 50 mm, product length (max.): 330 mm, product width (max.): 330 mm, production capacity: 1,000 unit/h, No reserve price – guaranteed sale to the highest bidder! Three-knife trimmer for high productivity: up to 1,000 cutting cycles per hour! TECHNICAL DETAILS Cutting thickness: 2 – 50 mm Number of knives: 3 Untrimmed format: Maximum: 330 x 330 mm; Minimum: 148 x 105 mm Trimmed format: Maximum: 300 x 300 mm; Minimum: 142 x 100 mm MACHINE DETAILS Dimensions (L x W x H): 2,260 x 1,160 x 1,600 mm Weight: approx. 1,530 kg Iiedexlzuqepfx Aaboh FEATURES User-friendly LCD display Flexible processing of various product sizes Fast changeover times of less than 10 minutes Advanced locking system for operator safety

Condition: ready for operation (used), Year of construction: 1991, operating hours: 20,242 h, functionality: fully functional, machine/vehicle number: 6538, pressing force: 163 t, overall weight: 25,000 kg, retraction force: 22 t, stroke length: 500 mm, actuation type: hydraulic, TECHNICAL DETAILS Ram Pressing force: 1,600 kN Return force: 220 kN Stroke: 500 mm Drive power: 37 kW Drawing Device Drawing force: 400 kN Stroke: 100 mm Ejector in Ram Ejector force: 50 kN Stroke: 50 mm MACHINE DETAILS Weight: 25,000 kg Electrical Data Pump Unit Ram + Drawing Cushion Rated power: 37 kW Rated current: 72/66 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Pump Unit Control Circuit + Ejector Rated power: 7.5/15.5 kW Rated current: 15.5/26.5 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Cooling-Filter Circuit Rated power: 2.2 kW Rated current: 5 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Cooler Rated power: 0.37 kW Rated current: 1.2 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Tool Clamping Rated power: 0.55 kW Rated current: 2.6 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Stop Spindle Rated power: 0.75 kW Rated current: 2.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Circulation Lubrication Rated power: 0.3 kW Rated current: 1.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Operating hours: 20,242 h Iedpjxgt Tzjfx Aabeih EQUIPMENT Decoiler (Year: 1999) Straightening machine (Year: 1999) Feed unit (Year: 2004) Tool breakage monitoring system Note: The seller strongly recommends a prior inspection of the machine, as the press cannot be removed from the hall in its assembled condition. If required, the seller can possibly arrange a specialized company for relocating the machine.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 523afbb3, Year of construction: 2019, workpiece weight (max.): 10 kg, workpiece length (max.): 250 mm, workpiece width (max.): 183 mm, workpiece height (max.): 150 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item on time by 20/12/2025! This lot offers a complete solution comprising a printer, washing unit, and sintering unit for auction! The machine is a demonstration model and has seen minimal use! TECHNICAL DETAILS Printing Process: Atomic Diffusion Additive Manufacturing (ADAM) Build Volume: 300 x 220 x 180 mm Layer Thickness: 50 µm – 200 µm Iiodpfx Aajxnp Haeboh Max. Part Size: 250 x 183 x 150 mm Max. Part Weight: 10 kg Sintering Capacity: 3,020 cm³ Sintered Area: 348 cm² Sintering Time: 26 hours Max. Temperature: 1,300 °C Washing Capacity: 18,356 cm³ Washing Volume: 356 x 254 x 203 mm Basket: Stainless steel washing basket Fluid: Opteon SF79, Opteon SF80, Tergo Metal Cleaning Fluid MACHINE DETAILS Printer Dimensions Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Washing Unit Dimensions Dimensions: 609 x 685 x 1,067 mm Weight: 136 kg Sintering Unit Dimensions Dimensions: 1,270 x 510 x 720 mm Weight: 136 kg Input Voltage: 240 V Input Current: 6 A Input Frequency: 60 Hz EQUIPMENT Dual-nozzle printing system Heated print chamber Vacuum-sealed print bed (new vacuum pump and vacuum silencer installed in 2022) Automatic leveling

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3 h, functionality: fully functional, pressing force: 20 t, working width: 1,250 mm, travel distance Y-axis: 1,270 mm, sheet thickness (max.): 6 mm, working length: 1,250 mm, No minimum price – guaranteed sale to the highest bidder! Ijdexn Rvijpfx Aaboih Machine from a training workshop with only 3 hours of punching time! Submission of a bid obligates timely collection by 21/11/2025! TECHNICAL DETAILS Pressing force: 200 kN Maximum sheet thickness: 6 mm Turret stations: 51 Auto-index stations: 4 Y-axis travel: 1,270 mm Working area: 1,250 x 1,250 mm MACHINE DETAILS Control system: AMNC-F Weight: 12,500 kg Electrical data Full load current: 55 A Short-circuit current: 25 kA Power consumption: 19 kVA Nominal voltage: 200 V Frequency: 50 Hz Operating hours Punching time: 3 h Power-on time: 895 h EQUIPMENT Solution Pack Blank School offline software AP100 2D CAD Production Designer 3D VPSS3i Blank Tooling package valued at EUR 8,000

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, pressing force: 90 t, cylinder diameter: 85 mm, stroke length: 350 mm, number of cylinders: 6, TECHNICAL DETAILS Electric heating plates: 3,000 x 1,300 mm Number of heating plates: 2 pcs. Total pressing force: 90 t Cylinder stroke: 350 mm Number of levels: 1 pc. Opening height: 350 mm Press cylinders: 6 pcs. Press cylinder diameter: 85 mm Iiedpfxexnyqpo Aabeh MACHINE DETAILS Operating temperature: 90 °C Max. temperature: 120 °C Electrical data Operating voltage: 400 V / 50 Hz Connected load: 22 kW Heating capacity: 22 kW Hydraulic unit power requirement: 3 kW EQUIPMENT Movement of the press table via rack-and-pinion and parallel guides Electronic control unit with touchscreen Digital timer for setting press time Digital input and monitoring of pressing pressure Digital diagnostics and fault display Safety circuit with two-hand control Safety pull-cord Safety support for lower press table EFC electronic flatness control Gold-anodized heating plates (Busse)

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 1,000 h, machine/vehicle number: GRM80E, control type: CNC control, degree of automation: automatic, actuation type: mechanical, controller manufacturer: Otto Bihler, controller model: Otto Bihler, punching force: 30 t, stroke rate (min.): 99 1/min, stroke rate (max.): 120 1/min, sheet thickness (max.): 5 mm, sheet thickness steel (max.): 5 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, overall weight: 1,500 kg, Equipment: centralized greasing system, emergency stop, We Sanjit Moulds Private Limited have a Bihler Machine GRM80E. Its a wonderful machine with Multiple Slides. We have maintained the machine properly. The price mentioned is CIF Hamburg. This machine is located in India in Nashik which is very 180 Kms from Mumbai. Ijdexc Txcspfx Aabjih

Condition: used, Year of construction: 2019, operating hours: 50 h, functionality: limited functionality, machine/vehicle number: Ipd750, number of ink cartridges: 6, color channels: 6, number of print heads: 1, Large format printer very less usage Iiodpoxfafzjfx Aaboh

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: Iodpeq Nxrxjfx Aabjih - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, KOMATSU TRANSFER PRESSES 2300 ton (1500 + 800 Ton) Year 2002 *E4T are the standard Komatsu transfer press machines loaded with the high speed servo feeder on the compact frame. *Large Transfer Presses E4T Iedpfxoxmrzqo Aabeih -Eco-friendly press machines -The high speed press machine pursuing high productivity Immediate Delivery

Condition: good (used), Year of construction: 2004, Sakurai Front Pick up Automatic Suction Feeder Sakurai Aktiprint SK UV Dryer Ijdpsww Eilofx Aabeih Sakurai Automatic Stacker Fully Cleaned

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 941, working height: 1,350 mm, working width: 600 mm, working length: 2,500 mm, TECHNICAL DETAILS Iiodpfx Aaoxnyg Rsbsh Pressing length: max. 2,500 mm Pressing height: max. 1,350 mm Working depth: max. 600 mm MACHINE DETAILS Electrical data Rated voltage: 3/N/PE/400 V Rated current: 11 A Rated power: 4.7 kW Frequency: 50 Hz EQUIPMENT Vertical and horizontal press beams operated electromechanically Pressure build-up via frequency-controlled geared motors Vertical and horizontal press pressure adjustable separately Pressing time adjustable

Condition: new, functionality: fully functional, Year of construction: 2025, The BS-20 concrete block machine is a fully automatic block production facility equipped with modern production technologies and a hydraulic system. Thanks to its PLC-controlled structure, it produces with high precision without the need for operator intervention. Operating at a pressure of 100-160 bar, the system has the capacity to produce 20 interlocks and 8 20x40x20 blocks per press. Furthermore, it minimizes labor requirements thanks to a collection robot that automatically stacks and packages dried products. The BS-20 offers an environmentally friendly production approach with its A+ energy-efficient motor system, EFF3 class electric motors, and low energy consumption. It meets European quality standards with its ISO 9001:2008 quality management system, CE certificate, and DIN-TSEK compliant structure. It provides a user-friendly experience with its automatic/manual switching system that increases operational flexibility, remote fault detection via the internet, and forklift-compatible design. BS-20 Concrete Block Machine Technical Specifications Production Capacity: 100–110 pallets per hour Pallet Size: 1,000 x 920 x 230 mm Control: PLC Automation System (Schneider) Bunker Capacity: 1.2 m³ Hydraulic Oil Capacity: 400 liters Upper Vibration: 3 kW x 2 Lower Vibration: 4 kW x 4 Total Electrical Requirement: 150 kW Total Vibration Power: 30,000 Product Height (max): 3,000 mm Product Length (max): 600 mm Machine Chassis: 10 mm Production in 8 Hours: 8,000 blocks / 18,000 interlocks Why Should You Choose the Constmach BS-20 Concrete Block Making Machine? The BS-20 Concrete Block Machine offers high efficiency, low operating costs, and long-lasting use for medium-sized businesses. Manufactured with the assurance of CONSTMACH engineering, this system delivers uninterrupted production performance thanks to its automation capabilities and robust construction. With spare parts warranty, fast service network, and 24/7 technical support, CONSTMACH ensures your investment operates reliably for many years. Therefore, by choosing the BS-20 model, you can maximize both your production quality and operational efficiency. Iijdpfxsxpi Tij Aabeh What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Tunkers Vorwärts S1100 fully automatic sheet to sheet laminating machine. Sheet to sheet laminating machine which is in good condition and was used a few times for specific jobs. Iijdpfx Ajv Rpknoabjh Dismantled and packed, ready for shipment.

Condition: as good as new (ex-display), Year of construction: 2025, Tool testing press 150to installation height 1000mm stroke 600mm ram plate 1500mm x 1000mm table surface 1500mm x 1000mm Iiedpfjkw Rbaox Aabeh Front light curtain Siemem control Weight 12,5to

Year of construction: 2022, condition: new, Type: All terrain crane Iedpfx Aajpa Rpuobjih Field of application: Construction Extensions (Booms): 9 Hydraulic extensions from mainbreak boom + 5 angle mechanical + gradual curve 6 Hydraulic extended from break boom (In each crushing group - 2 mechanics each) Section : Octagonal (octagonal) max. Load control, max. resistance Material : Strenx 960 Vertical Boom / Main Boom : Strenx 700 Support Feet: Gear Bottom Side: 2 Pieces Hydraulic Opens and Presses Under the chassis: 2 Hydraulic Opens and Presses 5-6 Legs: 1 Piece Hydraulic Opening and Pressing (Box with Boom Press – Long Opening) For detailed information please contact us

Condition: new, Year of construction: 2025, operating hours: 818 h, functionality: fully functional, 400 TONS MOTOR OPERATED WORKSHOP HYDRAULIC PRESS SPEC; Tonnages : 407 Tons at 400 bars Cylinder Calibre : 360 mm, Rot Calibre:250 mm, Stroke:400 mm Iiodpfsxnm Unex Aabsh Motor : 15 KW 20 HP 1500 Revolutions per Minute 380 Volt Pump : 45 cc 67,5 liters 400 bar variable flow rate with power regulation(Taiwan) Lever Hand : 1 P 120 Liters Hydropax ( Import ,Erapa) Front Distance of Press : 1420 mm Side Distance of Press : 560 mm Daylight : 900 mm Stroke : 400 mm ( Safe ) Movable Cylinder : to right and left Chrome plated and hardened cylinder Emergency Button Motor : 2.2 KW 3 HP 1500 Revolutions per Minute 380 Volt Pump :4 cc 6 liters gear pump Hand Lever : 1/2 ‘’ Hydropax Advance Speed :11.05 mm/sec. Return Speed : 21,35 mm/sec. Oil Tank of Press :1200x1000x600 mm 575 liter Press Frame : ST 44 or ST 52 and Steel Welded Weight of Press : 5500 kg (+/- About)

Condition: good (used), Year of construction: 2014, Direct Drive Straight Machine APL (Fully-Automated Plate Changing ) InlineColorPilot IPC (Graphometronic): Automatic inline color measuring and controlling system PressPilot Center IntegrationPilot plus Non-stop Isdpfx Aoxiw Tqeabjih Antistatic Device on Feeder (Eltex) Antistatic Device on Delivery (Eltex) Ink unit Temperature Control Technotrans (Watercooled) Automatic Blanket Washing Device with Blanket (Elettra) Automatic Ink Roller Washing Device Impression Cylinder Washing Device with Blanket Airglide Delivery ROLAND SelectDryer IR/TL Dryer - High Performance Performance Package Coating System Tresu with Doctor Chamber Blade Powder Max smart: Powder Sprayer QuickChange Air: Job specific air settings for all relevant consumption points via the control console QuickChange Clamp: Multi-purpose speed clamp for the coating form cylinder QuickChange Color Plus: Color adjustment system with computer-assisted optimization of the ink slide presets QuickChange Transferter QuickStart: re-start with fewer waste sheets Premium Speed: 18.000 s/h max. LCS: Low Coverage Stabilisation of Inks Central Air Cabinet: SelectAirStation

Condition: new, Year of construction: 2025, drop-through hole in table: 140 mm, table width: 590 mm, table length: 800 mm, stroke adjustment: 100 mm, pressing force: 60 t, ram bore: 40 mm, power: 5.5 kW (7.48 HP), punching force: 60 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • STEEL CONSTRUCTION BODY • 4-SURFACE BEARING RECORD • DUCTILE IRON CONNECTING ROD AND ANGLE BEARINGS • CRANKSHAFT AND TRANSMISSION SHAFTS 4140 STEEL STEEL • CENTRAL SYSTEM FULLY AUTOMATIC GREASE LUBRICATION • PNEUMATIC CLUTCH AND BRAKE COMBINATION • COMPLIANT WITH CE SAFETY DIRECTIVES • DOUBLE COIL SAFETY VALVE • MANUAL ADJUSTABLE STROKE • AUTOMATIC ADJUSTABLE STROKE BETWEEN 150-300 TONS • PHOTOCELL PROTECTION CURTAIN • PLC CONTROL SYSTEM • TOUCH LCD SCREEN BETWEEN 150-300 TONS • DOUBLE-HAND PEDAL CONTROL SYSTEM • MECHANICAL INSURANCE SYSTEM • HYDRAULIC INSURANCE SYSTEM BETWEEN 200-300 TONS • EMERGENCY REVERSE MOTOR MOVEMENT • IN ACCORDANCE WITH OCCUPATIONAL SAFETY REGULATIONS • VIBRATION PREVENTIVE WEDGE • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 60 STROKE ADJUSTMENT RANGE (MM) 10-100 Iijdpsvtx D Nsfx Aabeh NUMBER OF STROKES PER MINUTE (D/MIN-RPM) 55 RAM - REGULATION RANGE (MM) 60 RAM - TABLE DISTANCE (MM) 400 LOWER TABLE DIMENSIONS (MM) 590X800 LOWER TABLE HOLE DIAMETER (MM) 140 RAM TABLE DIMENSIONS (MM) 275X450 RAM MOLD EYEBALL DIMENSIONS (MM) 40 MOTOR POWER (KW) 5.5 WEIGHT (KG) 3200 MACHINE DIMENSIONS (MM) (H - W - L ) 2300X1550X1300 • SINCE WE ARE A MANUFACTURER, TECHNICAL SPECIFICATIONS CAN BE CHANGED IF REQUESTED.

Condition: as good as new (ex-display), Year of construction: 2025, Hydraulic SPS press 100to (1.000KN) pressing force Siemens SPS1200 series Screen 10" Beijer stroke 400mm Ijdpfx Aasnp Ndhobeih table top 790mm x 600mm Speed forward 110mm Speed return 140mm Light curtain Sick Remote maintenance module built in Rexroth hydraulics with cooler Available from week 46 fairground Stuttgart Modifications can be realized after request if necessary