Used Promatic P for sale (42,267)

Condition: used, Year of construction: 1995, Pressure 250 t throat 450 mm stroke 8 - 135 mm no. of strokes 50 /min distance table/ram, max. stroke up, adjustment up 635 mm table surface area 1250 x 850 mm hole in the table 355 mm table height over floor 950 mm passage to the back 660 mm ram surface 790 x 610 mm ram adjustment 130 mm Kwedpfx Ajvuk Hxjdwot power requirement 18,5 kW weight 14,0 t Dimensions (WxDxH) 1,5 x 2,8 x 3,65 m permitted for manual put-in according to the CE Regulations with motor, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, pneumatic counterbalance in ram, fix table, motoric centralized lubrication, two-hand operation can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1995, pressure 063 t Kwjdpjvut Ewsfx Adwot throat 260 mm stroke 12 - 120 mm Stroke rate 30 - 130 / min Distance table/ram, max. stroke up, adjustment up 495 mm Table surface area 800 x 560 mm Hole in the table 220 mm table height over floor 800 mm Passage to the back 270 mm Ram surface 450 x 360 mm Ram adjustment 120 mm Power capacity 5,5 kW Weight 5,0 t Dimensions (WxDxH) 1,8 x 1,5 x 2,7 m only permitted for automatic mode according to the CE Regulations with infinitely variable drive, pneumatic clutch/brake combination, mechanical overload protection in ram, fix table, two-hand operation can be inspected in running condition in our warehouse

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 3,787 h, load capacity: 2,000 kg, lifting height: 5,065 mm, free lift: 1,550 mm, fuel type: electric, mast type: triplex, construction height: 2,260 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Mast type: Triplex Transmission: Automatic Condition: Refurbished without warranty Technical condition: Very good Front tire type: Solid rubber (super elastic) Ksdpfx Ajxwz H Dodwewt Front tire condition: 80 - 100% Rear tire type: Solid rubber (super elastic) Rear tire condition: 60 - 80% Battery voltage: 48V Battery year: 2018 Description: Price includes new paintwork and new UVV inspection. The battery will be regenerated with a power cycler, including Kappa test. Suitable charger with plug included. We are happy to arrange affordable transport for you. Lease-purchase possible! Sideshift, 3rd valve, rear work lights, front work lights, half cab, full free lift, CE certificate, Mini levers

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 3,887 h, load capacity: 2,000 kg, lifting height: 5,065 mm, free lift: 1,550 mm, fuel type: electric, mast type: triplex, construction height: 2,260 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Automatic Condition: Refurbished without warranty Technical condition: Very good Kwsdpfx Asxp Szijdwot Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Description: Price includes new paintwork, a new UVV safety inspection, and a reconditioned battery (year of manufacture depending on availability), as well as matching charger with plug. We are happy to organize cost-effective transport for you. Alternatively, available with a new battery for EUR 12,950.00. Side shifter, 3rd valve, rear working lights, front working lights, roof cover, front windshield, full free lift mast, CE certificate, safety light, Front windshield without wiper

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Kodpfx Adehwhfiowowt Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, Year of construction: 1999, serial number 10970000633 control 3D Bahnsteuerung MILLPLUS letzte Ausbaust Control 67 10.221.661 x-travel 600 mm y-travel 700 mm z-travel 550 mm spindle SK40 - neu - 380 Std. spindle speed: 12.000 U/min tool change unit 30 Plätze Infrarot-Taster 600 L 40 bar mode of operation 3 + 4 Ksdpfxsx Uz Ape Adwswt MillPlus IT flushing gun mit Pumpe Durchmesser 630 mm T-slots 9 T-Nuten 14 H7 / 63 mm capacity 700 kg

Condition: used, Year of construction: 1999, serial number 10970000633 control 3D Bahnsteuerung MILLPLUS letzte Ausbaust Control 67 10.221.661 x-travel 600 mm y-travel 700 mm z-travel 550 mm spindle SK40 - neu - 380 Std. spindle speed: 12.000 U/min tool change unit 30 Plätze Infrarot-Taster 600 L 40 bar mode of operation 3 + 4 MillPlus IT flushing gun mit Pumpe Durchmesser 630 mm T-slots 9 T-Nuten 14 H7 / 63 mm capacity 700 kg Kwsdpfsx Uz Avjx Adwst

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,347 h, load capacity: 1,600 kg, lifting height: 4,920 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Automatic Condition: Refurbished, without warranty Technical condition: Very good Front tires type: Non-marking Front tires condition: 80 - 100% Rear tires type: Non-marking Rear tires condition: 80 - 100% Battery voltage: 48V Kwodpfxexf Rgpe Adwst Battery capacity: 625Ah Description: Price includes new safety inspection (UVV), very good paintwork, battery is reconditioned using a power cycler incl. Kappa test, matching charger with plug included, fork positioner will be retrofitted (was accidentally removed during refurbishment and not supplied). We are happy to arrange cost-effective transport for you. Leasing with option to buy is possible! Side shifter, fork positioner, 3rd valve, 4th valve, rear working light, front working light, roof cover, full cabin, CE certificate,

Condition: excellent (used), Julabo Julabo Transparent Circulating Bath Thermostat CT 72/P incl. ED Thermostat Item Description: For sale is a Julabo transparent circulating bath thermostat CT 72/P with Julabo ED (v2) temperature controller. This unit comes from a laboratory inventory and is in used but technically fully functional condition. The bath heats and controls temperature accurately and stably, and circulation is present (see photos). Ideal for laboratory, industrial, educational, testing, or development applications. Technical Data (excerpt) Manufacturer: Julabo Labortechnik GmbH (Made in Germany) Model: CT 72/P with ED thermostat (v2) Bath temperature range: approx. +10 °C to +60 °C Temperature stability: ±0.02 K Heating capacity: 2000 W at 230 V Circulation pump: Flow rate approx. 15 l/min Bath volume: approx. 18 liters Bath material: Acrylic glass / stainless steel Kjdpsx T Av Ijfx Adwewt Interface: RS232 Power supply: 190–253 V / 50–60 Hz Protection class: I / IP20 Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Specifications and data are subject to change and errors!) If you have any further questions, we will be happy to answer them by phone.

Year of construction: 2004, condition: excellent (used), Dryer Wittmann Kwjdpfx Adsumnknswet Drymax C30-30-P Year 2004 Conveyor units year 2005 2 pieces available

Condition: used, mileage: 1,12,483 km, power: 235 kW (319.51 HP), first registration: 12/2019, fuel type: diesel, empty load weight: 10,960 kg, maximum load weight: 15,040 kg, overall weight: 26,000 kg, axle configuration: 3 axles, wheelbase: 4,550 mm, color: green, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space volume: 37 m³, loading space length: 7,350 mm, loading space width: 2,440 mm, loading space height: 2,100 mm, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, differential lock, navigation system, onboard computer, parking heater, tail-lift, traction control, trailer coupling, Color: Green, unladen weight: 10,960 kg, gross vehicle weight: 26,000 kg, cargo compartment (L x W x H): 7,350 mm x 2,440 mm x 2,100 mm, tire size: 315/70 R22.5, cargo volume: 37 m³, 1st axle: , 2nd axle: , 3rd axle: , Fabric seats, air suspension, tail lift (stand-up, aluminium): BÄR BC2000 S4-C4, steered lift axle, digital tachograph, trailer coupling (pintle hook: 40 mm + ball head), Electronic Braking System (EBS), Electronic Stability Program (ESP), traction control (ASR), automatic climate control, Adaptive Cruise Control (ACC), air-suspended driver's seat, seat heating, height adjustment, H7 headlights, automatic driving lights, headlight range adjustment, radio, Bluetooth hands-free kit, Scania Lane Departure Warning System, adjustable steering column, power windows, roof hatch, outside temperature display, roof spoiler, fog lights, electrically adjustable and heated exterior mirrors, electrically controlled kerb mirror, wide-angle mirror, immobilizer, central locking, wind deflector, sun visor, axle load indicator, hill start assist, LED daytime running lights, 1x15-pin connector, telematics system, speed limiter, SCR EWERS swing-wall box body, internal dimensions: 7,350 x 2,440 x 2,100 mm. Non-binding offer, errors and intermediate sale reserved. Illustration may not correspond to the offer. Offer No. UVB250310. Kwodpfx Adeycm D Tjwjt

Condition: used, Year of construction: 1965, Dimensions (L/W/H) 10460,0 × 5715,0 × 5537 mm Kodpouh E Tbsfx Adwewt spindle head adjustment horizontal 3160 mm spindle head adjustment vertikal 1000 mm hobbing length 2250 mm weight of the machine ca. ca. 76660 kg t

Condition: used, mileage: 2,200 km, power: 129 kW (175.39 HP), first registration: 04/2025, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 04/2027, color: grey, gearing type: automatic, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, IVECO Daily 35S18HA8 CRV/P Transmission: Hi-MATIC 8-speed automatic transmission Wheelbase: 3520L mm Equipment Kodpfx Adjycnf Eswswt Tyres: 235/65 R16 * Luxury driver's seat, heated and adjustable, luxury passenger seat, heated and adjustable * 12V 110 Ah battery * Crew Van type plate * Reversing camera with dynamic guidelines * Spare wheel mounted on chassis frame * 86-litre fuel tank, RLT * My Iveco Infotainment 10" with navigation * USB ports for driver and passenger * Integrated Alexa voice assistant * Driver assistance systems: lane departure warning + blind spot warning (BSW) * 3x LED cargo area lights * Fixed side window in Crew Van * Spare wheel * Additional speed limiter * Rear axle ratio i = 3.615 * Rear adaptive air suspension * Additional seat belt safety features * 12V 13-pin trailer socket * Fog lights * Air conditioning with automatic climate control * Auxiliary hot water heater * Twin sliding doors * Rear doors with 260° opening angle * Wooden floor in cargo area * 170 cc climate compressor * Tow bar with ball head * Overhead shelf above windscreen * Exterior loading lights above rear doors * Seat heating * Additional remote key * Adaptive cruise control (ACC) * Battery charged * Documentation in German, 4x2, MY24 * Generator 3500W (14V x 250A) * Full LED headlights * Traction Plus with hill descent assist * Mirrors with body width of 2200 mm * Category IV preparation * EU digital tachograph 4.0 * Switch for body lighting * Grab handle on A-pillar * Comfort headrests * and much more. All information subject to change. Errors and omissions excepted.

Year of construction: 2005, condition: excellent (used), Three phase choke Make Siemens Type 1 P 6 SN 1111-OAAO-1 EA0 Version b GWE 00000587022 Kwjdpsfbb Dujfx Adwst 80 kw

Year of construction: 2002, condition: used, Serial number: 2020xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20126 Specifications: Model Year: 2002 230V 4 amp settings: 60, 100, 150, and 200 Cuts all types of steel Plate size: up to 2500x6000 mm Kjdewdvgzopfx Adwewt Recently replaced drive motors Description:This is an Esab UXE-P 3500 with both plasma and gas burner on the same carriage. You can choose between 4 amp settings depending on the thickness of the steel to be cut: 60 amp, 100 amp, 150 amp, and 200 amp. It can cut all types of steel, including aluminum, stainless/acid-resistant, Hardox, and regular mild steel from 2 mm to 30 mm. With the gas burner, you can cut thicknesses up to 150 mm.Plasma and gas burner can also be operated simultaneously. The machine can handle plate sizes up to 2500x6000 mm.It has been regularly serviced, and the drive motors have recently been replaced.

Condition: good (used), Year of construction: 2009, Ref. -No.: 10616 Manufacturer: DMG Type: DMU 210 P Year of construction: 2009 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 257XXXX X-Travel: 1800 mm Kwodpfxox R R Hcj Adwst Y-Travel: 2100 mm Z-Travel: 1250 mm B-Axis: -30 / +180 ° C-Axis: 360 ° Table Load: 8000 kg Clamping Area: 1.700 mm Tool Taper: SK 50 Spindle Speed: 10.000 RPM Max. Torque: 288 Nm Total Power Requirement: 38 kW No. Of Working Stations: 60 Internal cooling: 40 bar Holding torque: 22.700 Nm Further information: - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. The machine can be viewed under power.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10615 Manufacturer: DMG Type: DMU 210 P Year of construction: 2011 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 128/XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Swivel range: -30 / +180 ° Table Load: 10000 kg Max. rotary table diameter: 1700 O Table speed range: 12 min/-1 Kwedex R R E Sepfx Adwot Tool Taper: SK 50 Numbers Of Tools In Magazin: 60 Weight Of The Machine Ca.: 41 t Motor spindle: 24000 RPM Feed drive A, C: 30 min/-1 horizontal milling head: 130-1.380 mm vertical milling head: 230-1.480 mm

Condition: good (used), Year of construction: 2000, Ref. -No.: 10609 Manufacturer: GLEASON - PFAUTER Type: P 2400 G Year of construction: 2000 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine length: 1100 mm Machine width: 6585 mm Machine Height: 5200 mm Max. Workpiece Diameter: 2640 mm Weight Of The Machine Ca.: 23 t Grinding Wheel Diameter: 400 mm Spindle Speeds (Infinitely Variable): 600 bis 6000 mm Grinding Wheel Width: 80 mm X-Axis: 1200 mm Y-Axis: 300 mm Z-Axis: 1000 mm Z2 - axis: 150 mm Sandable profile depth: 80 mm Workpiece table: 0 bis 5 1 / min Feed rate X-axis: 3000 mm Feed rate Y-axis: 5000 mm Z-axis feed rate: 6000 mm Further information: - Fully automatic centering device - Oil mist separation - Gear tooth measurement - “Profile grinding” software package - Error diagnosis - IFK2 internal milling head - Milling mandrel with spacer discs - Chip conveyor - Oil mist extraction - Technical documentation Kwodpsx R R Exsfx Adwot

Condition: used, functionality: fully functional, mileage: 2,05,000 km, power: 125 kW (169.95 HP), first registration: 01/2015, fuel type: diesel, number of seats: 18, number of standing places: 15, gearing type: mechanical, overall weight: 7,200 kg, empty load weight: 4,705 kg, emission class: euro6, color: white, brakes: retarder, wheelbase: 4,750 mm, Equipment: ABS, 18 seats + 2 folding seats 15 standing places ABS - ASR Cruise control Air conditioning Kwedpfxoyay E Se Adwst Auxiliary heater Convector heating Luggage racks left + right Radio 2 roof hatches Rear low-floor entry Ski basket holder

Year of construction: 2022, condition: ready for operation (used), Two ALUP compressors including two heat exchangers are available. Operating pressure: 7bar, max. pressure: 13bar, max. inlet temperature: 55°C, power range: 11kW-30kW, refrigerant: R513A, refrigerant quantity: 500g, weight: approx. 290kg. Documentation available. An on site inspection is possible. Kwjdpeycwr Uofx Adwjt

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 9,769 h, load capacity: 2,000 kg, lifting height: 6,130 mm, free lift: 2,000 mm, fuel type: electric, mast type: triplex, construction height: 2,610 mm, fork length: 1,150 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tires type: Superelastic Rear tires type: Superelastic Battery voltage: 48V Battery capacity: 625Ah Kjdpoyauw Nefx Adwswt Battery year: 2018 Description: Sideshift, 3rd valve, front work lights, overhead guard, full free lift, CE certificate, safety light.

Condition: new, empty load weight: 7,320 kg, maximum load weight: 22,680 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,100 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading area length 8,100 mm, loading height approx. 900 mm, 20 x lashing eyes each 10 t, 14 x stake pockets in the outer frame, drive-on ramps (approx. 3.000 x 750 mm), drive-on ramps laterally adjustable, spring lifter for 1-piece ramps, wooden floor 70 mm thick, storage box with lid for lashing chains or tension belts, contour marking according to regulations, spring-loaded parking brake, vehicle hot-dip galvanized, , surcharge for:, warning signs with lighting and rotating beacon = price: 800 ¤, widening to 3 m = price: 1.100 ¤, hydraulic 1-piece ramps 500 ¤, also with 9 m loading area length + widening in stock , , , , -- Subject to printing errors, mistakes and changes, sample pictures --, More data under: !, More Details: ! Kjdpfx Aox R Sf Hodwswt

Condition: ready for operation (used), Year of construction: 2001, operating hours: 22,180 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: TNC430, total height: 3,200 mm, table width: 1,250 mm, table length: 1,000 mm, table load: 2,000 kg, overall weight: 18,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 120, product length (max.): 6,000 mm, number of axes: 5, This 5-axis DMG DMU 125 P hi-dyn was manufactured in 2001. It features a Heidenhain control system, a SK50 spindle taper, and 120 tool stations. With spindle hours totaling 22,180, consider the opportunity to buy this DMG DMU 125 P hi-dyn universal machining centre. Contact us for more information about this machine. • Spindle hours: 22,180 • Tool magazine/stations: 120 • Travel distances: 1250 x 880 x 800 • Tool holder: SK50 • Changer: 120 tool positions in chain magazine • Gripper type: Double gripper • Control: Heidenhain TNC 430 • Working range: Longitudinal: 1250 mm Transverse: 880 mm Vertical: 800 mm • Dimensions: approx. 6 x 8 x approx. 3.20 m height • Weight: approx. 18,000 kgB axis is indexedAdditional data: • Full protection cabin • IKZ through spindle center • Blow air through spindle center retrofitted • Chip conveyor • Coolant tank 600 liters • NC rotary table D1250 x 1000 mm • Max. load at table center 2,000 kg • Clamping grid 9 slots 18H7 a 100 mm • Kit motor with SK50 gearbox – spindle speed 8,000 rpm • Renishaw MP10 SK50 infrared measuring probe • Electronic handwheel • 4 operating modes possible • Flushing gun with pump Kjdpfox Sz Dhex Adwewt Technical Specification Taper Size SK 50 Through-spindle Coolant Yes Dimensions Machine Depth 8000 mm

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Kwedjhv U S Nopfx Adwjt Cooling Mode: WATER COOLING

Condition: used, mileage: 78,000 km, first registration: 10/2017, fuel type: diesel, overall weight: 11,990 kg, color: white, emission class: euro6, Equipment: ABS, air conditioning, tachograph, Iveco Eurocargo ML 120EL19/P – 2017 – Euro 6: Kwjdpfx Ajycfm Hjdwjt - First registration: 10/2017 - EL version - Tyres: 245/70 R17.5 - Engine: 190 HP – Euro 6 - Approx. 78,000 km - Wheelbase: 3690 mm - Automatic gearbox - Rear air suspension - Gross vehicle weight: 11,990 kg - Payload capacity: approx. 5,900 kg - Digital tachograph Accessories: - Air conditioning - Electric windows - Electrically adjustable mirrors - ABS - Air-suspended driver’s seat - Fog lights - Central locking - CD radio - Battery master switch Superstructure: - Box body dimensions: 5.26 x 2.36 x 1.95 m (internal measurements) - Both side walls fully electrically operated with shutter system - Hydraulic folding tail lift, 2,000 kg capacity, with aluminium platform, roll-stop, and additional foot controls. - Another unit available with 105,000 km. The vehicle is available for inspection and test drive at: PSL AUTOCARRI SRL Via degli Imprenditori, 45 (Industrial Area) 37067 Valeggio sul Mincio (Verona, Italy) Tel. 045-7950955 Please contact us to arrange an appointment in order to organize access to our premises efficiently. For further information, technical details, and the vehicle’s sale price, please contact our sales managers directly at 045-7950955. Note: The vehicle description is provided for information purposes only and may contain errors or inaccuracies. Interested parties are advised to verify all specifications prior to purchase. Psl Autocarri Srl accepts no liability for any errors or discrepancies contained in this listing. NOTE: WE WILL ONLY RESPOND TO INQUIRIES CONTAINING THE NAME AND TELEPHONE NUMBER OF THE REQUESTER.