Used Puller for sale (98)

Condition: new, functionality: fully functional, mileage: 4 km, power: 45 kW (61.18 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 5,200 kg, empty load weight: 5,200 kg, operation weight: 5,200 kg, mast type: duplex, Year of construction: 2025, platform length: 6,500 mm, transport length: 2,240 mm, transport width: 44,145 mm, transport height: 2,315 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1600-TX5 pile driver is a versatile and high-performance machine, designed for efficient pile installation in construction, solar farms, guardrails, and infrastructure projects. With its powerful hammer, flexible mast movement, and operator-focused design, the MW1600TX-5 provides superior control and precision, even in challenging terrains. Hfsdpfx Afsx Tg Nxotol 90-Degree Rotating Platform: The upper body platform with the mast can rotate 90 degrees, allowing for precise pile placement without repositioning the entire machine. 15-Degree Mast Tilting: The mast can tilt 15 degrees left and right, providing greater flexibility on uneven or sloped terrains.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 2,200 mm, total width: 3,400 mm, total length: 2,400 mm, overall weight: 4,500 kg, compressed air connection: 8 bar, warranty duration: 12 months, working width: 2,400 mm, infeed height: 1,000 mm, Equipment: documentation/manual, Technical characteristics: CAPACITY: up to 1200 boxes per hour PULLER SPEED: up to 3m/s INSTALLED POWER: 23 kW CARDBOARD TYPE: single, double and triple wall up to 14mm and 1400GSM in standard option and HD cardboard over 2000GSM per request. MAXIMUM BOARD SIZE: 2400mm X 7000mm MINIMUM BOARD SIZE: 200mm width x 650mm length DISTANCE BETWEEN SLOTTING KNIVES: 50mm – 2200mm (500mm segmented slotting knives) WIDTH OF SLOT: 8mm Handholder tool x 1 - The unit is positioned automatically and the distribution of cuts is also setup digitally via control unit. The total force the die cut can exert is 5200 Newton. Creasing Wheels x 4 - The machine has four creasing wheels and it is possible to use only the selected wheels, i.e. not crease the full length of the cardboard. Knife tool x 2 - The knives are made of high density steel alloy which allows processing 1400 GSM, and they are positioned automatically. The transversal creasing tool is integrated in the knife sub-frame. The knives are segmented and can be positioned independently from one another. Cross cutting tool x 1 - The module is also utilized for production of pallet boxes with loading flap. The unit can produce transversal cuts anywhere on the sheet, which enables it to create box locking mechanisms, loading flaps and windows on the box. In combination with longitudinal cutting knives, square and rectangular shapes can be cut out in the sheet, effectively replacing die cutting for those forms. Circular blades x 6 - This unit can perform work selectively and anywhere along the length of the corrugated sheet. The unit is utilized when producing FEFCO 0204, FEFCO 0403, glue flap or material reformatting. Also, in combination with cross cut, windows and similar square/rectangular shapes can be cut. Gluing module unit x 1 -.. The unit is servo powered and moves at speeds up to 1m/s. The glue can be dispersed in lines or in beaded patterns anywhere along the corrugated cardboard sheet. This module is powered by NORDSON adhesive systems. Control unit - 21 inch touch sensitive HD widescreen color display with user friendly UI. The unit itself comes with predefined FEFCO standard models in memory. Remote access and control. Additional modules: Flexo printer (one color 1000x870mm, integrated system), Second die-cut module, Vacuum feed table, Platform vacuum feeder (fully automatic system), Platform vacuum stacker (fully automatic system), HD cardboard upgrade (for cardboards up to 2200GSM). Additional tools: Creasing wheels, Double Creasing wheels (creasing line distance 10-50mm), Perforation knives (both axes), Part-cut knives for 7 layer cardboard (both axes), Diagonal creasing tool, Crusher-tool for glue flaps on 7 layer cardboard, Middle slotting knife (for multi-production of boxes). Hfodpfx Afefivfyotjl Warranty 60 months, provided training and support for services and parts.

Condition: used, Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor -Design: stable -without: roller conveyor drive motor Hfjdpfx Ajfkm Eueftjl -Roll width: 557 mm -Conveying length: 680 mm -Diameter roll: 70 mm -Dimensions: 875/700/H125 mm -Weight: 44kg

Condition: good (used), Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor -Transfer station: roller conveyor with conveyor belt, solid base frame, height adjustable Hsdpsrrzfgofx Aftjfl -Speed: roller conveyor 51 m/min / conveyor belt 45 m/min -Conveyor rollers. Ø86 x 1415 mm rubberized wheels -Roller distance/axle distance: 205 mm -Belt spacing: 200 mm -Conveyor belt length: approx. 2290 mm, dimensions see technical photo. drawing -Drive/gearbox: 2x Nord, see photos of nameplates -Raising: hydraulic, without drive unit -Transport dimensions: 2480/2380/H810 mm -Weight: 1180 kg

Condition: used, Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor, transfer station -Transfer station: 1x roller conveyor with conveyor belt, 1x conveyor belt -Base: solid base frame, height adjustable -Speed: roller conveyor 20 m/min / conveyor belt 23 m/min -Roller track: conveyor track rollers. Ø63 x 2500 mm, conveyor belt 17 x 2815 mm -Conveyor track: 6 belts 17 x 2830 mm -Drive/gearbox: North, see photos of nameplates -Transport dimensions: 2810/1660/H870 mm / 2900/920/H870 mm -Weight: 569 kg / 258 kg Hodpfjrv Av Isx Aftsfl

Year of construction: 2010, operating hours: 13,500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information ABI TM 14/17 V Year 2010 CAT Engine / 470 kW Hfsdpfx Afsh Tyylstjl Base carrier : Sennebogen SR 35 T Aux Winch Vibrator MRZV 24VV Pre drilling rotary available Good working condition!

Year of construction: 2006, operating hours: 2,500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Vibrator MR 100 V for RTG Piling rigs Hfedpfoh Tyzijx Aftel inclusive clamp MRZ 105

Year of construction: 2008, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Hfedpfx Aeh Tyzqeftol Upper carriage Sennebogen BS 60 R CAT C 18 570 kW Twin turbo central lubrication optional with vibrator MR 100 or MR 125 V B Tonic for Vibrator / FOW Drilling / SCM and SMW Mixing Good working condition

Year of construction: 2008, operating hours: 9,750 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Piling rig Upper carriage : Sennebogen BS 80 R Engine : CAT C 18 570 kW Optional : Vibrator MR 125 V, KDK 232 S, DKS 100/ 200 Hfodpfxoh Tyzxe Aftsl Additional : Systems Vibrator, Kelly and CFA drilling central lubrication, air compressor , prepration CSM The machine is in very good working condition!

Year of construction: 2006, operating hours: 13,700 h, condition: used, Field of application: Construction Hfodpfx Aeh Ty Akjftol Please contact Mohamad Fattah Ahmad for more information LIEBHERR LRB 155 + Juntan Hammer HHK 5/7 More details on serious require, current location Germany Yard M2 GmbH Wilhelmshaven Juntan Hammer HHK 5/7 Year. 2002

Year of construction: 2011, operating hours: 5,900 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information ICE 28 RFS + Power Pack 525 RF Year of man. Hfjdsh Tyydspfx Aftel Vibrator 2011 Power pack 2004 Very good working condition More details on serious require

Year of construction: 2010, operating hours: 9,500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Year of Man. 2010 Working hours 9500 Base carrier BAUER BT 45 Attachments : Vibrator MR 70 V general overhauled, Pre drilling rotary ABI MDBA 3500 Engine CAT313 kW Aux winch Air condiion Good working condition ! Hsdpfxsh Tyzmo Aftsfl

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total height: 3,100 mm, total width: 7,400 mm, total length: 11,000 mm, overall weight: 13,000 kg, compressed air connection: 8 bar, warranty duration: 12 months, working width: 2,400 mm, infeed height: 1,700 mm, Equipment: documentation/manual, BOXmaker ULTRA - PVF CAPACITY: up to 1600 boxes per hour PULLER SPEED: up to 3m/s MACHINE DIMENSIONS: 7400mm x 11000mm x 3100mm INSTALLED POWER: 16.5 kW CARDBOARD TYPE: single, double, and triple wall up to 14mm and 1400GSM MAXIMUM BOARD SIZE: 2400mm x 3000mm, stack height 1100mm MINIMUM BOARD SIZE: 800mm width x 1000mm length WIDTH OF SLOT: 8mm PVF (platform vacuum feeder) - 3m or 6m Modular – can be added to BOXmaker ULTRA at later date Vacuum fingers - ejectors, mini vacuum producers Platform capacity 1400kg of active load Slight correction of position of the cardboard sheet Hfsdpfod Rzqaox Aftel PVS (platform vacuum stacker) - 3m or 6m optional module, can be added in later date. Handholder tool x 1 - The unit is positioned automatically and the distribution of cuts is also setup digitally via control unit. The total force the die cut can exert is 5200 Newton. Creasing Wheels (longitudinal creasing) x 4 - The machine has four creasing wheels and it is possible to use only the selected wheels, i.e. not crease the full length of the cardboard. Slotting Knife tool x 2 - The knives are made of high density steel alloy which allows processing 1400 GSM, and they are positioned automatically. The transversal creasing tool is integrated in the knife sub-frame. The knives are segmented and can be positioned independently from one another. Cross cutting tool x 1 - The module is also utilized for production of pallet boxes with loading flap. The unit can produce transversal cuts anywhere on the sheet, which enables it to create box locking mechanisms, loading flaps and windows on the box. In combination with longitudinal cutting knives, square and rectangular shapes can be cut out in the sheet, effectively replacing die cutting for those forms. Circular blades (longitudinal cutting) x 6 - This unit can perform work selectively and anywhere along the length of the corrugated sheet. The unit is utilized when producing FEFCO 0204, FEFCO 0403, glue flap or material reformatting. Also, in combination with cross cut, windows and similar square/rectangular shapes can be cut. Printing unit x 1 - The printing unit is capable of outputting single color prints of up to 1000mm of width and 870mm in length, making it the perfect choice for standard transportation box markings. The imprint can be placed anywhere on the box, including creased areas - positioned automatically. Gluing unit x 1 - The unit is servo powered and moves at speeds up to 1m/s. The glue can be dispersed in lines or in beaded patterns anywhere along the corrugated cardboard sheet. This module is powered by NORDSON adhesive systems. Control unit - 21 inch touch sensitive HD widescreen color display with user friendly UI. The unit itself comes with predefined FEFCO standard models. FREE MODE - make custom boxes. 3000 box memory. 12 month warranty, provided training and support for services and parts.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, grinding length: 1,600 mm, grinding width: 500 mm, workpiece weight (max.): 900 kg, grinding wheel diameter: 355 mm, rapid traverse X-axis: 1 m/min, travel speed (max.): 25 mm/min, TECHNICAL DETAILS Table size: 500 x 1,600 mm Max. grinding area: 500 x 1,600 mm Max. distance from spindle center to worktable: 600 mm Load capacity (with magnetic chuck): 900 kg Axis parameters Longitudinal feed speed: 5–25 m/min Cross rapid traverse (X-axis): 50–1,000 mm/min Cross feed, incremental: 1–20 mm/stroke Cross hand feed (MPG): 0.005 mm/click Vertical rapid traverse (Z-axis): 50–500 mm/min Vertical automatic feed: 0.005–0.04 mm/stroke Vertical hand feed (MPG): 0.005 mm/click Grinding wheel Dimensions (outside diameter x width x bore): 355 x 20~50 x 127 mm Spindle speed: 1,440 rpm Drive capacities Spindle motor: 7.5 kW Hydraulic pump motor: 3 kW Servo motor, cross feed: 0.5 kW Servo motor, vertical feed: 2 kW Coolant pump: 0.125 kW Hfedpfjyymkcjx Aftjl Lubrication pump: 0.06 kW Total connected load: 14 kVA MACHINE DETAILS Dimensions & weight Required installation space: 7,120 x 2,550 mm Height: 2,700 mm Machine weight: approx. 6,000 kg EQUIPMENT PLC + HMI automatic grinding control Integrated control for magnetic chuck Coolant tank Balancing arbor Grinding wheel flange and puller Wheel dresser stand MPG handwheels for Y/Z axis Operating manual Splash guard Standard grinding wheel Levelling wedges and bolts

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 5,500 W, spindle speed (max.): 7,000 rpm, overall weight: 2,900 kg, controller manufacturer: FANUC, controller model: 18i-TB, number of axes: 7, This 7-axis TSUGAMI BS32CE-V was manufactured in 2008. It features a maximum turning diameter of 32 mm and a turning length of 250 mm. The machine is equipped with two spindles, offering main spindle speeds of 200 – 7000 rpm and sub-spindle speeds of 200 – 6000 rpm. If you are looking to get high-quality turning capabilities, consider the TSUGAMI BS32CE-V swiss type turning machine we have for sale. Contact us for further details. • Condition: Very good; low number of hours • Power-on hours: 28,538 • Spindle hours: 9,190 • Number of spindles: 2 • Max turning diameter: 32 mm • Max turning length: 250 mm • Max drilling diameter: 12 mm • Max threading diameter: M10 • Sub-spindle speed: 200–6000 rpm • Sub-spindle motor power: 2.2 kW • C-axis: 360,000° • Spindle nose: for F37 collet • Tooling/Stations: • Number of stations: 4 • Number of tools: 20 • Number of live tools: 5 • Turning tools: 5 • Drilling tools: 6 • Cross machining tools: 4 Hfodpfx Afeyq Nwxotsl • Live tool speed: 200–5000 rpm • Live tool power: 0.9 kW • Working feed: 1–6000 mm/min • Rapid feed: 20 m/min • Dimensions (machine, without bar feeder): 2150 × 1500 × 1800 mm Additional equipment • Bar feeder: IEMCA BOSS 332L • Chip conveyor • Parts catcher • Short part ejector • Bar puller • Work light • Set of collets • Serial port interface RS232 • 3-color status light • Documentation

Condition: used, functionality: fully functional, Used lifting device for raising and lowering manhole covers, fully functional. Hodozg Ub Hepfx Aftofl

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: KAP1, air demand: 16,000 m³/h, power: 36 kW (48.95 HP), suction capacity: 16,000 m³/h, Equipment: cabin, Dielectric automatic powder booth KAP1 Price: PLN 492,693.30 + VAT Electrical and energy data • Voltage: 400 V (3P + N + PE) • Power connection: 36.34 kW • Pneumatic connection: 1" • Air pressure: min. 6 bar • Air quality: oil < 0.1 mg/m³, water vapor < 1.3 g/m³ • Air consumption: 1710 Nl/min (operation) • Compressor: SC-30 • Air tank: 1800 L Hfsdpfsv Rpx Sox Aftol Painting parameters • Painting speed: 1933 mm/min • Part dimensions: 800 x 1800 mm • Hanger height: 500 mm • Coating thickness: 100 µM • Gun array: vertical Technical data and configuration • Design: dielectric plastic • Passage dimensions: 1000 x 2400 mm • Air flow: 12348–16000 m³/h • Powder center: ProfiCenter CP02 • Manipulators: 2 pcs. • Guns: 8 automatic, 2 manual (ProfiSpray) • Part detection: yes (height, width) • Systems: cyclone separator, ProfiControl, beam pulling • ATEX: zone 22, II 3D Platforms and cabin body • Platforms: entry, exit, stainless steel floor, anti-slip stairs • Housing: dielectric plastic, LED lighting, slots for manipulators Air knives and suction channel • Automatic floor cleaning • Suction channel with pneumatic flap Gun blow-off and control • Automatic blow-off guns • 10" touch panel, 50 programs, manipulator control, dust extractor, drive speed X-axis and part pulling system • Automatic gun setting • Part pulling: speed 570–2830 mm/min, 2 pullers The machine also includes: • ProfiSpray A applicator • PSS-1 controller • PM-1 guns • ProfiCenter CP-02 powder center • CK-D1400L cyclone dust extractor • MA1-180 manipulator and MX1-10 X-axis • OZ-12H dust extractor • ProfiControl 10" control • BP-H2000 W900 part measuring system

Year of construction: 2026, condition: new, 🏭 POWDER COATING BOOTH KPZ-3 Automatic filter cleaning with adjustable pulse timing, plus manual mode. 🧼⏱️🖲️ 100% polyester filters - washable, water-resistant, long-lasting. 🧵💧♻️ ROMER JET™ filter cleaning - patented high-speed air pulse for powerful cleaning. 💥💨🏅 Low-noise aluminium fans (74-79 dB) - safer, spark-minimized operation with low power use. 🔇⚡🛡️ Hjdpefzkzhofx Aftjfl Adjustable airflow baffle - antistatic plate protects filters and improves extraction. 🌬️🛡️📈 Leak-tight filter mounting - gasket + clamp for strong sealing and easy service. 🔩🧷✅ Touchscreen control - auto (time), auto (clogging sensor), manual + filter change alerts. 📲🔁⚠️ Optional powder container - waste collection or fluidized tank with direct applicator feed. 🧺💨🎯 Overhead puller - moves beams through the booth, reducing manual effort. 🏗️➡️💪 Integrated sieving unit (with container) - clean recovered powder for reuse, EX-zone vibrator. 🧪♻️⚙️ Explosion-proof design - components selected to prevent explosive mixtures. 🛡️💥✅

Year of construction: 2026, condition: new, 🏭 POWDER COATING BOOTH KPH Automatic filter cleaning with adjustable pulse timing, plus manual mode. 🧼⏱️🖲️ 100% polyester filters - washable, water-resistant, long-lasting. 🧵💧♻️ Hjdpfx Aefz Atbjftofl ROMER JET™ filter cleaning - patented high-speed air pulse for powerful cleaning. 💥💨🏅 Low-noise aluminium fans (74-79 dB) - safer, spark-minimized operation with low power use. 🔇⚡🛡️ Adjustable airflow baffle - antistatic plate protects filters and improves extraction. 🌬️🛡️📈 Leak-tight filter mounting - gasket + clamp for strong sealing and easy service. 🔩🧷✅ Touchscreen control - auto (time), auto (clogging sensor), manual + filter change alerts. 📲🔁⚠️ Optional powder container - waste collection or fluidized tank with direct applicator feed. 🧺💨🎯 Overhead puller - moves beams through the booth, reducing manual effort. 🏗️➡️💪 Integrated sieving unit (with container) - clean recovered powder for reuse, EX-zone vibrator. 🧪♻️⚙️ Explosion-proof design - components selected to prevent explosive mixtures. 🛡️💥✅

Condition: new, Year of construction: 2026, 🏭 POWDER COATING BOOTH KPP Automatic filter cleaning with adjustable pulse timing, plus manual mode. 🧼⏱️🖲️ 100% polyester filters - washable, water-resistant, long-lasting. 🧵💧♻️ Hedpfx Afsfy T Tbotsfl ROMER JET™ filter cleaning - patented high-speed air pulse for powerful cleaning. 💥💨🏅 Low-noise aluminium fans (74-79 dB) - safer, spark-minimized operation with low power use. 🔇⚡🛡️ Adjustable airflow baffle - antistatic plate protects filters and improves extraction. 🌬️🛡️📈 Leak-tight filter mounting - gasket + clamp for strong sealing and easy service. 🔩🧷✅ Touchscreen control - auto (time), auto (clogging sensor), manual + filter change alerts. 📲🔁⚠️ Optional powder container - waste collection or fluidized tank with direct applicator feed. 🧺💨🎯 Overhead puller - moves beams through the booth, reducing manual effort. 🏗️➡️💪 Integrated sieving unit (with container) - clean recovered powder for reuse, EX-zone vibrator. 🧪♻️⚙️ Explosion-proof design - components selected to prevent explosive mixtures. 🛡️💥✅

Condition: new, Year of construction: 2020, 🏭 POWDER COATING BOOTH KPO-3 Automatic filter cleaning with adjustable pulse timing, plus manual mode. 🧼⏱️🖲️ 100% polyester filters - washable, water-resistant, long-lasting. 🧵💧♻️ ROMER JET™ filter cleaning - patented high-speed air pulse for powerful cleaning. 💥💨🏅 Low-noise aluminium fans (74-79 dB) - safer, spark-minimized operation with low power use. 🔇⚡🛡️ Adjustable airflow baffle - antistatic plate protects filters and improves extraction. 🌬️🛡️📈 Leak-tight filter mounting - gasket + clamp for strong sealing and easy service. 🔩🧷✅ Hjdpfoflk Akex Aftsfl Touchscreen control - auto (time), auto (clogging sensor), manual + filter change alerts. 📲🔁⚠️ Optional powder container - waste collection or fluidized tank with direct applicator feed. 🧺💨🎯 Overhead puller - moves beams through the booth, reducing manual effort. 🏗️➡️💪 Integrated sieving unit (with container) - clean recovered powder for reuse, EX-zone vibrator. 🧪♻️⚙️ Explosion-proof design - components selected to prevent explosive mixtures. 🛡️💥✅

Condition: used, 1. Decoiler Brand : SCHLOEMANN Type : Hydraulic expanding decoiler Function : Coil holding and controlled rotation Expansion control : Hydraulic Frame : Welded steel base with integrated brake Estimated capacity : 8–12 tons Coil bore : Ø 508 mm ----- 🔹 2. Straightener / Pinch Roll Manufacturer : COMEC (Société de Constructions Mécaniques de Creil) Hodsw Dd Igjpfx Aftofl Type : Pinch roll and leveler Control : Mechanical Order number : 1305.1268 Recommended lubricants : Shell Macoma, Tellus, Alvania (as per nameplate) Function : Feeds and flattens strip before slitting Secondary role : Synchronized strip puller ----- 🔹 3. Slitter Manufacturer : COMEC Type : Circular blade slitting machine Drive : Mechanical gear train Blade adjustment : Manual Blades installed : ~10 sets (visible) Function : Longitudinal slitting of metal sheets into narrow strips ----- 🔹 4. Shear (End Cropper) Manufacturer : COMEC STAMCO Type : Rotating or inline shear Function : End cropping or final length cut Control panel : Electromechanical (visible on photo) Machine Application Complete line for metal coil slitting, producing narrow strips from master coils, with upstream flattening and final end cutting. Features / Differences – Heavy-duty hydraulic decoiler by SCHLOEMANN – Mechanical straightening section from COMEC – Manual-adjust slitter with circular blades – Outfeed shear for end trimming or final cut-to-length – Older but industrial-grade line, suited for medium gauge materials

Condition: used, Surface Grinding Machine, Precision Surface Grinder BRAND (Switzerland) Model FS 735 Machine No.: 322 82 Year of manufacture: 1982 Electro-magnetic chuck 700 x 300 mm Grinding length 700 mm Grinding width 300 mm Hodpfxsn Saf Nj Aftsfl Cross travel max. 340 mm Table longitudinal travel max. 750 mm Distance spindle center to magnet max. 400 mm Grinding wheel diameter 300 mm Grinding wheel width 50 mm Grinding wheel width 60 mm with single-sided recess in the grinding wheel Grinding wheel bore 127 mm Table longitudinal feed 0 - 30 m/min, stepless Table cross feed per pulse 1 to 10 mm Rapid cross traverse 340 mm in 6 sec Vertical infeed 0.001 - 0.055 mm Vertical rapid traverse 150 mm/min Grinding wheel speed 2500 rpm Grinding wheel surface speed 39 m/s Spindle drive motor power max. 5.7 kW Hydraulic motor power 1.5 kW Power supply 400 Volts, 50 Hz, approx. 7 kVA - Stepless grinding wheel speed adjustment - Automatic depth infeed - Automatic table cross feed, hydraulic and mechanical handwheel for table cross movement - Hydraulic clamping for the cross movement - Hydraulic table longitudinal movement - Hydraulic dressing device - Electromagnetic chuck BRAILLON, Type BJP 700 x 300 mm, overall height 100 mm, continuously adjustable magnetic force - Centralized oil lubrication - BEDA band filter system with coolant tank and pump standing beside, L x W x H = 1600 x 650 x 1100 mm - Separate hydraulic unit with electrical cabinet, L x W x H = 1800 x 750 x 1700 mm - Machine equipped with one grinding wheel Ø 295 mm, width 50 mm - Two additional grinding wheel holders with grinding wheels (internal diameter 127 mm) - One grinding wheel puller Required space for surface grinder L x W x H 2200 x 1800 x 2350 mm Weight of surface grinder approx. 3100 kg Weight of hydraulic unit 500 kg Weight of band filter system 200 kg Space requirement on pallet 2700 x 2200 x 2500 mm Total weight with pallet approx. 4000 kg Good condition

Condition: used, Surface grinding machine, precision surface grinding machine BRAND (Switzerland) Type Mini 500 Machine No.: 505/86 Year of manufacture: 1986 Electro-magnetic clamping table 450 x 200 mm Grinding length 500 mm Grinding width 240 mm Cross travel 220 mm Table longitudinal travel 550 mm Distance between spindle center and magnet max. 350 mm Grinding wheel diameter 225 mm Grinding wheel width max. 25 mm Grinding wheel bore 50.8 mm Table longitudinal feed 0.5-24 m/min, stepless Table cross feed, pulse 0.05-30 mm Cross feed rate 10 - 1000 mm/min Vertical feed 0.001 - 0.05 mm Vertical feed rate 600 mm/min Grinding wheel speed 2820 rpm Grinding wheel speed 33 m/s Motor power, grinding spindle 2.2 kW Hfedpjd Nrqfjfx Aftsl Motor power, hydraulics 1.1 kW Mains connection 400 V, 50 Hz, 9.5 kVA - automatic depth feed, vertical feed - mechanical handwheels for axis movements - hydraulic table longitudinal movement - electromagnetic plate WAGNER 450 x 200 mm, height 73 mm - central lubrication system - band filter system with coolant tank and pump, adjacent, L x W x H = 1300 x 500 x 650 mm - 2 additional grinding wheel arbors for grinding wheels with 50.8 mm inner diameter - 1 balancing mandrel and 1 grinding wheel puller - adjacent hydraulic unit, L x W x H = 700 x 300 x 750 mm Space requirement L x W x H 2000 x 1400 x 2250 mm Weight approx. 1600 kg Good condition

Year of construction: 2014, condition: refurbished (used), High-performance 40 Ton Triple tube drawing bench BÜLTMANN GKZ 400/3-16 Complete 40 tn triple tube drawing line, revamped by Bültmann in 2014. Includes extensive set of tooling and large spare parts package. This BULTMANN GKZ 400/3-16 Triple tube drawing line combines a robust 40-ton drawing capacity with significant upgrades completed in 2014, including a Siemens S7-400 PLC conversion, renewed machine bed, rebuilt puller, and upgraded drawing carriage. The line is available immediately and is suitable for demanding tube production applications. TECHNICAL SPECIFICATIONS · Manufacturer: BÜLTMANN · Model: GKZ 400/3-16 Triple · Major overhaul: 2014 - Control cabinet overhauled - PLC converted to Siemens S7-400 - New Siemens drives - Machine bed renewed - Drawing carriage converted (wheels, damping, etc.) - New chain - Puller rebuilt · Material strength: 500 N/mm² · Input tube length: 2.5–12 m · Exit tube length: 3–16 m · Maximum drawing force: 400 kN (40 tons) · Maximum drawing speed: 80 m/min · Return speed: 120 m/min · Main motor power: 300 kW · Hydraulic power unit: 30 kW · Auxiliary drives: 7.5 kW · Tube diameter range*: 20–65 mm · Wall thickness range: 1–5 mm * Tube range produced by the previous owner. Tooling is available for this range and should be verified onsite. SCOPE OF SUPPLY - Complete drawing bench according to layout - Renewed machine bed - Upgraded drawing carriage - New chain - Rebuilt puller - Electrical system with Siemens S7-400 PLC and Siemens drives - Hydraulic system - Existing safety barriers - Large set of tooling (to be verified onsite) - Comprehensive spare parts package (to be verified onsite) - Documentation in digital and paper format BENEFITS ✓ High-capacity 40-ton drawing force for demanding tube production ✓ Modernized Siemens automation for improved reliability and maintenance ✓ Major mechanical refurbishment completed by BÜLTMANN ✓ Includes tooling, spare parts package, and documentation ✓ Immediate availability for rapid installation COMMERCIAL INFORMATION - Machine status: Dismantled - Video of the line in operation available Hsdpezkf I Eofx Aftofl - Delivery: Immediate | As is, where is Material strength: 500 N/mm² Input tube length: 2.5–12 m Exit tube length: 3–16 m Maximum drawing force: 400 kN (40 tons) Maximum drawing speed: 80 m/min Return speed: 120 m/min Main motor power: 300 kW Hydraulic power unit: 30 kW Auxiliary drives: 7.5 kW Tube diameter range*: 20–65 mm (*Produced by previous owner. Tooling available for that range. To be checked onsite) Wall thickness range: 1–5 mm