Used Radial Drilling Machine for sale (91,671)

Condition: ready for operation (used), functionality: fully functional, Radial drill, Csepel RFM 51, used machine Ksdpfx Aaewcqlcjbenc Manufacturer: Csepel Model: RFM 51 X-axis length: 4000 mm Arm travel: 3100 mm Radius: 2460 mm Distance from base to spindle: 1660 mm Drilling capacity in steel: 100 mm Drilling capacity in cast iron: 120 mm

Condition: used, Year of construction: 1978, 40 1008 rated current 20 A voltage 24 V Kjdpewg Hunofx Aabsnc weight of the machine ca. 3,5 t

Condition: ready for operation (used), Rotational speed: 37-1900/min, an inspection is possible. Kedpsqvnmfefx Aabjnc

Condition: ready for operation (used), Year of construction: 1975, arm 1200MM stroke head on bench 1400MM universal head portable radial Kedpfxjvm Akge Aabsnc

Condition: excellent (used), Year of construction: 2007, BEMA MG1050 Radial Arm Drilling Machine Knjdpfxsxawcms Aabsc Year of Manufacture 2007 1000mm Radial Arm Spindle Centre to column min/max 300 - 1000mm Spindle Taper 4MT Spindle Motor 2.2kW Speeds 32 - 2500rpm Spindle Stroke 280mm Box Table 600 x 450 x 450mm Base Plate 1700 x 800mm LWH - 1760 x 800 x 2050 Weight 1600Kgs *For Sale with Jet Machinery Ltd* Jet Machinery Stock No: #78995 Machine Serial Number: 710080 Cost: £5,950.00 + VAT (£7,140). Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Stock no.: 3024 Knedpow Rkc Ajfx Aaboc Manufacturer: GSP Year of manufacture: Type / Model: 405T125 Machine no.: 2913 Drilling capacity: 40 mm Spindle taper: MK 4 Speed range: 40 to 1,800 rpm Feed: 0.09 to 0.36 mm/rev Control: conventional Arm reach: 250 to 1,250 mm Cube table: 800 x 560 x 600 mm Footprint: 1,800 x 800 mm Total connected load: kW Accessories/Equipment: clamping cube Condition: good, ready for operation Weight: approx. 1 t Dimensions: 2,000 x 800 x 2,500 mm

Condition: excellent (used), The radial drilling machine was completely overhauled at our facility in 2021 and is now, after the buy back from our customer, available for sale again. Following the general overhaul and modernization in 2021, the machine met all geometric standards and had the full technical capabilities of a comparable brand-new machine. Technical data: * Max. drilling diameter in steel / cast iron: 75 / 85 mm * Max. thread cutting in steel / cast iron: M56 / M68 * Max. distance between spindle and table: 2000 mm * Min. distance between spindle and table: 390 mm * Spindle taper: MK 5 * Spindle speed range: 12.5–1600 rpm * Spindle stroke: 350 mm * Power supply: 400 V three-phase current * Spindle with mechanical feed * Electrically lowered and raised arm Kjdpfx Aaewuf Ehebonc * Electric arm height lock * Motor power: 5.5 kW * Approximate machine weight: 7000 kg * Dimensions (L / W / H): 3275 mm / 1170 mm / 3280 mm

Condition: good (used), DONAU DR 40 Z - High-Speed Radial Drilling Machine incl. Tools - Drill spindle taper MK 4 - Quill diameter 55 mm - Quill stroke 220 mm - 18 spindle speeds 35-1800 rpm - Drill feeds 0.075–0.60 mm/rev - Column height adjustment 450 mm - Drilling radius min/max 305–1005 mm - Table size 1200x600 mm - Drilling capacity / steel 40 mm - Drilling capacity / cast iron 50 mm - Thread cutting unit / steel / M33 - Thread cutting capacity / cast iron / M45 - Various tools included, see photos Kodpsw En Sljfx Aabenc Dimensions: LxWxH 1.9x2.3x2.8 meters / Weight 1800 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, It can be sold with a power cable for an additional 100 Euros to the price. Knjdpfevpgfasx Aaboc

Condition: not inspected (used), Maintained radial drilling machine drilling capacity in steel: 40,0 mm throat: 1300 mm tool holder: MK4 max. swivel angle: +/- 180 degrees quill stroke: 280 mm Min. distance column - drilling spindle (X) 593 mm Max distance column - drilling spindle (X) 1473 mm Speed: 52 - 2000 rpm (12 steps) Feed rate: 0,05-0,1-0,2-0,3 mm/rev (4 steps) column diameter: 250 mm spindle diameter: 68 mm clamping area: approx. 1445 x 810 mm operating voltage: 400 V Total power requirement: 5.5 kW Knodpfeirngaox Aabec Machine weight: approx. 2815 kg. Space requirement (L x W x H): 2010 x 820 x 2495 mm Equipment: - electric height adjustment - hydraulic clamping of the drilling slide and the column - cube clamping table with T-slots - automatic spindle feed - R/L run of the drilling spindle - electric height adjustment from boom - speed adjustment manual - feed adjustment manual - handwheel for drill carriage adjustment We will be pleased to demonstrate the machine under power on site. All data without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 32 mm arm length 1000 mm workpiece height max. 1400 mm Knedpfxst H Smyj Aabsc total power requirement 6 kW weight of the machine ca. 3.700 kg dimensions of the machine ca. m

Condition: new, Drilling capacity cast iron / steel ----- 31.5 / 25 mm Tapping capacity cast iron / steel ----- 20 / 16 mm Speed range ----- (8) 100 ~ 1600 rpm Spindle stroke ----- 135 mm Unload ----- 300 ~ 720 mm Ksdoq E Izmepfx Aabsnc Spindle intake ----- MK3 Spindle feed ----- 0.08 / 0.14 / 0.22 mm/omw Cube table----- 250 x 250 x 250 mm Column diameter ----- 150 mm Foot ----- 1200 x 620 mm Maximum distance spindle - base ----- 275 ~ 680 mm Motor ----- 1.1 KW Voltage ----- 400V / 3 Phase Weight ----- 580 KG INCLUDING * Cooling system * CE plug * SCHNEIDER electrics OPTION * Floor cabinet

Condition: new, column diameter: 320messurements (LxWxH): 2670 x 1120 x 2760weight approx.: 3200drilling performance: Stahl (S235JR) - 50Drilling table T-slot size: 14Drilling table T-slot spacing: 180Clamping table length: 630Clamping table height: 500connected load: 6,5Maximum spindle to drilling table distanc: 1420speed range: 44 - 1023Number of speed ranges: 12Maximum Spindle to Column Distance: 1600- Versatile application range, e.g., drilling, reaming, threading - Electrically braked motor - 24V DC electrical system and 2-channel safety circuit according to DIN EN 12717 - Heavy, massive, high-quality cast construction - Wide reach thanks to horizontally adjustable machine head - Clearly arranged control panel - Smooth swivel and travel axes - Elaborately designed column swivel with optimized clamping for maximum stability and minimal clamping offset Kodpjwruk Iefx Aabjnc - Robust, torsion-resistant construction of the arm - Height adjustment of the arm is carried out via powerful motorized drive and lifting spindle - Gearbox of the drill head running in an oil bath - Arm guideways hardened and precision ground - Gear wheels made of chrome-nickel steel, hardened and precision ground, resulting in quieter and smoother operation - Drill head and column can be clamped or released together or separately - Right-left rotation - Massive, precise drill table, generously dimensioned - Hardened and ground worktable with parallel T-slots - Machine light - Overload protection - Thick-walled cast column ensures smooth running and stability - LED lamp - Coolant system with coolant tank in the machine base - RD 6 / RD 7 - The column is hydraulically clamped

Condition: good (used), COLETT / GAMESA - Radial drilling machine, mobile use possible using crane - Arm approx. 1200mm Knedpjw Dpn Eefx Aaboc - Universal angle head - Spindle speeds 95 - 750 rpm - Automatic feeds - Morse taper MK 4 - Arm height adjustable approx. 1400mm - Control cabinet - retrofit Dimensions: LxWxH 2x1x2.1 meters / Weight 1500 kg Errors and input mistakes excepted.

Year of construction: 1988, condition: ready for operation (used), Drilling capacity: 35mm, drill spindle taper: MT4, quill stroke: 285mm, reach: 300mm-1000mm, speed: 2500rpm, arm length: 500mm, spindle-to-base plate distance: 1000mm, base plate dimensions X/Y: 1150mm/780mm. An on-site inspection is possible. Kjdpfx Aaew Nq Susbenc

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 6104, drilling capacity: 40 mm, spindle speed (max.): 2,800 rpm, quill stroke: 200 mm, table length: 1,200 mm, table height: 820 mm, table width: 600 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Machining Data Drilling capacity in solid material (St 60): Ø 40 mm Drilling capacity in solid material (GG 22): Ø 50 mm Thread cutting (St 60): M 36 Kjdpfswvi I Njx Aabjnc Thread cutting (GG 22): M 45 Dimensions and Travels Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1,200 mm x 600 mm Number of T-slots: 4 T-slots (DIN 650): 18 H7 Distance between T-slots: 125 mm Distance spindle nose to table: 185 mm Distance spindle nose to base plate (min.): 985 mm Distance spindle nose to base plate (max.): 1,595 mm Drilling radius: 540 - 1,290 mm Swivel range: 330° Work table height: 820 mm Quill travel: 200 mm Column travel: 410 mm Table Table length: 1,200 mm Table height: 820 mm Table width: 600 mm Rapid traverse X-axis (at drilling radius 1,000 mm): 5 m/min Y-axis: 4 m/min Spindle Speed: 15 - 2,800 rpm Feeds (stepless): 5 – 2,000 mm/min Accuracy according to manufacturer Positioning accuracy X/Y-axis: ±0.075 mm Repeatability X/Y-axis: ±0.015 mm Backlash in working area: 0.02 mm Positioning accuracy Z-axis: ±0.085 mm Repeatability Z-axis: ±0.03 mm MACHINE DETAILS Total height: 2,500 mm Total width: 1,400 mm Total length: 2,500 mm Total weight: 3,000 kg EQUIPMENT - Two-axis digital position display

Condition: used, Year of construction: 1977, bore capacity in steel (diameter) 75 mm arm length 1700 mm workpiece height max. 370 - 1700 mm total power requirement 12 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m C S E P E L (Hungary) Radial Drill Model RFh 75/2000 Year 1977 Serial No. 61158 _____ Drilling capacity, Steel / Cast Iron, max. 75 / 90 mm Thread cutting Steel / Cast Iron M 60 / 70 Distance between column and spindle centre, max. 1,700 mm Spindle taper ( Morse Cone) MK 5 Vertical stroke of radial arm 380 mm 21 Spindle speeds 19 – 1.900 rpm Kodpfst Hw Uvex Aabonc Base plate 1.100 x 2.300 mm Mounting height, min./max. (base plate) 370 / 1,700 mm Swivelling radius +/- 180 ° Vertical adjustment of radial arm 950 mm Horizontal adjustment of drilling slide 1.500 mm 12 Drilling feeds 0.047 - 2 mm/rev Spindle drive, approx. 10 kW Total electrical load 12 KW - 380 V - 50 Hz Weight 7.000 kg Accessories / Special Features: * Preselector for the Spindle speeds, hydraulically actuated * Choice of Feed rate mechanically * Drilling with or without infeed, respectively manually by a fine feed device/resp. by handwheel * Drill head slide adjustable on radial arm manually, vertical Radial arm adjustment Motorized. * Depth of infeed adjustable by stop dogs on quill dial, with automatic return of quil after stop of infeed * Electro-mechanical clamping of the radial arm and the drillhead via switch * Coolant equipment built in the lower table plate, VOGEL Central lubrication * Built-on cubic table, approx. 600 x 1,200 x 300 mm. This machine is ideal for steel work, tool work, and mechanical engineering. Condition : average to good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: new, Drilling capacity steel ----- 50 mm Motor ----- 4 KW Speed range ----- 25 ~ 2000 r/min Spindle stroke ----- 315 mm Knedpsga Ty Njfx Aabsc Unloading ----- 350 ~ 1600 mm Spindle mounting ----- MK5 Spindle feed ----- 0.04~ 3.2 mm/rev Cube table----- 630 x 500 x 500 mm Column diameter ----- 350 mm Foot ----- 2400 x 1000 x 200 mm Maximum distance spindle - foot ----- 350 ~ 1220 mm Weight ----- 3500 KG INCLUDED * Hydraulic clamping ! * Cooling system * CE plug * SCHNEIDER electricity

Condition: new, column diameter: 260messurements (LxWxH): 1725 x 745 x 2550weight approx.: 1800drilling performance: Stahl (S235JR) - 42Drilling table T-slot size: 19Drilling table T-slot spacing: 171Clamping table length: 635Clamping table height: 415connected load: 4Maximum spindle to drilling table distanc: 1270speed range: 37 - 1253Number of speed ranges: 12Machine FeaturesFunction & ApplicationVersatile application range, e.g. drilling, reaming, tapping Knsdpfewrukzox Aaboc Forward and reverse rotation Drive & ControlElectrically braked motor 24V DC electrics and 2-channel safety circuit according to DIN EN 12717 Clearly arranged control panel All axes are manually clamped Structure & DesignHeavy, solid, high-quality cast construction Thick-walled cast column for high smoothness and stability Rigid, high-strength boom construction Large reach thanks to horizontally adjustable machine head Massive, precise drilling table with generous dimensions Hardened and ground clamping table with parallel T-slots Elaborately designed column swivel with optimized clamping for maximum stability and minimal clamping offset Drill head and column can be clamped or released together or separately Movement & MechanicsSmooth-running swivel and travel axes Boom height adjustment via powerful motor drive and lifting spindle Boom guideways hardened and precision-ground Drill head gearbox runs in oil bath Gear wheels made of hardened and precision-ground chrome-nickel steel, ensuring quiet and smooth operation Additional EquipmentMachine light LED lamp Overload protection Coolant system with integrated tank in the machine base Model VersionsRD 4 / RD 5

Condition: used, Year of construction: 1989, bore capacity in steel (diameter) 55 mm arm length 2005 mm workpiece height max. 1500 mm table-size 1500 x 800 mm Kedpfx Aowvvbijabjnc spindle taper MT 5 spindle turning speed range 30-1200 U/min feed range 0,06 - 1,0 mm/U crossrail adjustment horizontal 495 - 2.000 mm crossrail adjustment vertical 505 - 1670 mm spindle stroke 310 mm column diameter 360 mm distance spindle/base plate 825 - 1670 mm power requirement 4,4 kW voltage 400 V total power requirement 7,2 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,00 x 0,80 x 2,80 m - Pole-changing motor with 2 speeds - right / left rotation - machine light - Cube table

Year of construction: 1969, condition: ready for operation (used), Bohrleistung: 55mm, Ausladung: 1600mm, Spindelaufnahme: MK5, Spindelhub: 400mm, Drehzahl: 1800U/min, Vorschub: 1,5mm/U, Tischdimensionen X/Y: 1500mm/800mm, Maschinendimensionen X/Y/Z: ca. 2800mm/1000mm/3000mm, Gewicht: ca. 5500kg. Eine Besichtigung vor Ort ist möglich. Knjdpfxjw Na E Dj Aabjc

Condition: excellent (used), Year of construction: 1983, bore capacity in steel (diameter) 32 mm arm length 636 mm workpiece height max. 720 mm spindle turning speed range 38 - 2000 U/min threading 38 - 643 stroke 450 mm spindle stroke - max. 170 mm total power requirement 6 kW weight of the machine ca. 1,9 t Ksdpfx Ajwvl Irsabenc dimensions of the machine ca. 2,5 x 1,5 x 2,2 m Left / right rotation.

Condition: used, bore capacity in steel (diameter) 23 mm spindle taper MK 2 spindle stroke 130 mm arm length ca. 860 mm table-size 1280 x 500 mm surface area ca. 1250 x 480 mm turning speed range 115 - 2400 U/min workpiece height max. ca. 535 mm boring chuck Schnellspannfutter 1-13 Knedpfx Aajwugrcebjc weight of the machine ca. 690 kg total power requirement 1 kW range L-W-H ca. 1300 x 1800 x 2100 mm Distance spindle center - stand center (projection): approx. 860 mm Distance table quill (workpiece height): max. 535 mm Adjustability of the horizontal/vertical arm: approx. 300 - 400 mm

Condition: new, column diameter: 432messurements (LxWxH): 3050 x 1185 x 3050weight approx.: 5600drilling performance: Stahl (S235JR) - 70Clamping table length: 1000Clamping table height: 500connected load: 11speed range: 44 - 1023Number of speed ranges: 29 - 1575traverse path - x: 1185traverse path - y: 1000Versatile application range, e.g., drilling, reaming, threading Electrically braked motor 24V DC electrical system and 2-channel safety circuit according to DIN EN 12717 Heavy, massive, high-quality cast construction Wide reach thanks to horizontally adjustable machine head Clearly arranged control panel Smooth swivel and travel axes Kedpfx Ajwruk Uoabsnc Elaborately designed column swivel with optimized clamping for maximum stability and minimal clamping offset Robust, torsion-resistant construction of the arm Height adjustment of the arm via powerful motorized drive and lifting spindle Drill head gearbox running in an oil bath Arm guideways hardened and precision ground Gear wheels made of chrome-nickel steel, hardened and precision ground, resulting in quieter and smoother operation Drill head and column can be clamped or released together or separately Right-left rotation Massive, precise drill table, generously dimensioned Hardened and ground worktable with parallel T-slots Machine light Overload protection Thick-walled cast column ensures smooth running and stability LED lamp Coolant system with coolant tank integrated in the machine base Model: RD 6 / RD 7 Column is hydraulically clamped

Condition: new, column diameter: 210messurements (LxWxH): 1260 x 700 x 2180weight approx.: 1120drilling performance: Stahl (S235JR) - 32column diameter: 210Drilling table T-slot size: 19Drilling table T-slot spacing: 171Clamping table length: 600Clamping table height: 380connected load: 3Maximum spindle to drilling table distanc: 1060speed range: 73 - 1247Number of speed ranges: 6 Knsdpewrukujfx Aaboc