Used Ras 2000 for sale (78)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1970, working width: 6,040 mm, sheet thickness (max.): 2 mm, TECHNICAL DETAILS Sheet width: 6,040 mm Hfodpjwmmbzefx Aaben Sheet thickness: 2 mm Electrical system Total power requirement: 10 kW Dimensions and weight Machine weight approx.: 7,000 kg

Condition: excellent (used), Maximum cutting length: 2040 mm Maximum sheet thickness: 2 mm steel Weight: approx. 1100 kg Hsdpfxjduw Eko Aabofn

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm -Weight: 65kg Hodpfxogxgm He Aabofn

Condition: used, Year of construction: 1979, sheet width 2500 mm plate thickness 3 mm distance between columns 2540 mm back stop - adjustable 550 mm total power requirement 5 kW Hfodpfx Aaovxwudjben weight of the machine ca. 2,7 t dimensions of the machine ca. 3,2 x 2,5x 1,9 m

Condition: used, Year of construction: 1989, Hydraulic Guillotine Shear Manufacturer: RAS Type 85.44 4000 x 4 mm Year of Manufacture: 1989 Technical Specifications Manufacturer: RAS Type: 85.44 Hedswbpwbopfx Aabofn Year of Manufacture: 1989 Usable Length: 4000 mm Sheet Thickness: 4 mm Power Consumption: 7.5 kW Dimensions: L 4.70 x W 2.0 (plus support arms 600 mm) x 1.70 m Weight: 5.7 t Equipment - Controlled backgauge 1000 mm - Motorized cutting gap adjustment - Multicut Eco 2000 control system - Pneumatic sheet support - Angle stop - 3 support arms - Scrap cart - Technical documentation All information is subject to change. Demonstrations are available at any time in our showroom.

Condition: used, Max. sheet thickness: 1.5 mm steel 2 transit stations, 1x Pittsburgh Hfsdpjpid Irefx Aabsn Weight: about 500 kg

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Hfedpfsv Tk Exjx Aaben Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 11/7, Detailed Description of the Listing Type: Motorized folding machine, model RAS UpDownBend 78.30, designed for bending thin sheet metal. Unlike traditional press brakes, the beam executes up and down movements, enabling bending operations without the need to flip the workpiece. Ideal for large, heavy parts or pieces requiring multiple handling steps. Brand & Model: RAS UpDownBend 78.30 Year of Manufacture: 2009 Technical Specifications: • Positive and negative bending • Bending length: 3200mm • Bending capacity: 4mm mild steel • Minimum allowable bending radius: 1.5 x sheet thickness • Maximum upper beam opening height: 600mm • Maximum bending angle: 135° • Minimum flange length: 6 x sheet thickness • Backgauge depth: 95-1500mm • CNC control: CNC Controller 6000-4 • Connected load: 15kW • Weight: 11T Condition: Fully operational with some tooling requiring replacement Recent investments: Hjdpsw A It Rjfx Aabsfn • In 2024: CNC controller replaced by RAS • In 2024: Replacement of folding beam transmission motors with self-locking motors (new motors, cables, and drives); work carried out by RAS Included accessories: • Standard bending tools • Motorized front stops • Technical documentation in French Location: Linselles 59126, France Availability: Immediate Transport / Delivery: Machine preparation and transportation at the buyer’s expense Power disconnection and securing at the seller’s expense Additional Information: We are selling this machine following the recent purchase of a traditional press brake equipped with handling arms, which is better suited to our new production setup.

Condition: good (used), Year of construction: 1962, guillotine shears, sheet metal shears, metal sheet shears, crank guillotine shears -mechanical guillotine shears -Cutting width: 2040 mm -max. cutting thickness: 2.0 mm -Equipment: back stop, side stop, 3 supports Hfjdpfx Aedzd Huoaben -Drive: 5.5 kW -Installation dimensions: 2650/1900/H1070 mm -Transport dimensions: 2650/730/H1070 mm -Weight: 1378 kg

Condition: good (used), Year of construction: 1990, Beading machine RAS 12.31 Sheet thickness max. 1.75 mm. Hjdpfxovk D Tds Aabjfn

Condition: excellent (used), Year of construction: 1999, Motorized folding machine Fab. RAS Typ. Flexibend 73.30 Year 1999 Technical data Make: RAS Type: 73.30 Flexible Year of construction: 1999 Effective length: 3200 mm Sheet thickness: 3.0 mm Opening width upper beam: 300 mm Drive: 4.5 KW Dimensions: L 4300 x 2300 x 1750 mm Weight: approx. 4.4 t Equipment - Control system 5000 - CNC - controlled back gauge 10-1500mm - Automatic upper and lower tool clamping - Automatic folding beam adjustment - Crowning Hodpfotluigsx Aabefn - Technical documentation Tools: - Bending rail 25mm ( s = 3mm), segmented - Sharpening rail All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Max. sheet thickness: 1.5 mm steel 2 flow stations Hfedpfevb Etgjx Aabjn Weight: about 500 kg

Condition: used, machine/vehicle number: ubk., sheet width:6060 mm plate thickness:2 mm total power requirement:7,5 kW Hfjdpfx Ascxxuqoabsn weight of the machine ca.:6,75 t dimensions of the machine ca.:7,0x2,0x2,5(LxBxH) m

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, RAS 74.30 upper beam tool (see picture) The upper beam tool was on a RAS 74.30 built in 1997 and was apparently only used rarely, the pictures speak for themselves. The upper beam tool is available for the entire length of the upper beam including the corner tool (see picture). Hfsdpjvx Hxrjfx Aabon Viewing is welcome. Purchase without return or guarantee.

Condition: used, Stop for press brake, bending machine, guillotine shears ..., clamping angle, clamping aid,.Support rail for press brake, bending machine, guillotine shears, stop rail, clamping rail -Manufacturer: RAS, support rails from guillotine shears type RAS 53.60 Hfodst Rl Ulspfx Aaben -Dimensions: 805/100/H80 mm / groove width 16 mm 3 pieces -Dimensions: 720/75/H85 mm with stop rail 1 piece -Delivery/Price: complete -Transport dimensions: 805/350/H80 mm -Weight 34.8 kg

Condition: good (used), RAS screw press - Width: 80 cm - Depth: 60 cm - Height: 150 cm - Weight: approx. 250 kg Good condition, fully functional, can be inspected and tested on site. Hfodpfxjtku Eks Aabsn Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: used, Year of construction: 2019, Fold former RAS 22.09 - Very good used condition - Specifications: Number of roller stations: 9 pieces Profiling speed approx. (based on 72mm driving roller diameter): 16 m/min Largest sheet thickness to be folded: 1.5mm Profile height max.: 20mm Working shaft diameter: 28mm Center distance of the working shafts - Vertical: 72mm - Horizontal: 100 Minimum roller clamping dimension (both sides): 60mm Connection power: 3.0 kW Rated current - At 230V: 12A - At 400V: 7A Fuse: 16A Net weight approx.: 430 kg Hedpov Hc E Rjfx Aabjfn Noise level: 70 db(A) - Please note: Without roller set (optionally available on request)

Condition: used, Max. cutting length: 2540 mm Max. sheet thickness: 3 mm steel Manually adjustable rear stop up to 550 mm Side stops and table extensions Sheet metal holding knife sharpened Hfodpfot T Hgbsx Aabjn Weight: approx. 2500 kg

Year of construction: 1998, condition: used, machine/vehicle number: RM48/3189, Item number: MA977 Manufacturer: RAS Type: Rasamax ST Duo Year of manufacture: 1987 Machine-No.: ST-Duo 1055 Length [mm]: 650 width [mm]: 600 height [mm]: 1200 weight [kg]: 190 Connected load: 380V / 1,4KW Number of tool stations [pcs.]: 2 Hfedjcwyifspfx Aabsn Gear [rpm]: 1500 / 3000 accessories: base cabinet / roller conveyor / spare grinding wheel

Year of construction: 2007, condition: excellent (used), RAS Turbo bend plus 62.25 New gearboxes fitted from Ras Bending length 2540mm / 2.5 metre Material thickness max 2.5mm Four extremely dynamic and fast ramp-driven movements under CNC System 6000 CNC touch screen – New control fitted in 2016 Extended back supports Light guards Portable tooling rack New / Year of manufacture 2007 Complete with: J shape back gauge Complete with segmented and straight tools and tooling rack Tooling (supplied with the machine): Hfjdpfogd Dgqex Aabjn Standard ‘sharp’ upper tooling – 3x lengths 845mm Bottom tooling single length – 1x 2.54m length 10mm wide Bottom tooling single length – 1x 2.54m length 20mm wide Goats foot segmented upper tooling – 110 height section 200mm wide – 10 lengths 60mm – 1 length 55mm – 1 length 50mm – 1 length 45mm – 1 length 40mm – 1 length 35mm – 1 length 30mm – 1 length 120/90mm LH Box end – 1 length 120/90mm RH Box end – 1 length Segmented bottom tooling 200mm wide – 10 lengths 120mm – 2 lengths 60mm – 1 length 55mm – 1 length 50mm – 1 length 45mm – 1 length 40mm – 1 length 35mm – 1 length 30mm – 1 length Tool cart supplied

Condition: used, Swivel bending machine, edge bench, gutters, roof gutters, beading machine, beading machine Hedpfx Aody Rhdjabsfn -Max. Working width: 1280 mm -Max. Sheet thickness: 1.75 mm -Opening width: 180 mm -Clamping via: threaded spindle -Bending angle adjustable via: stop -Dimensions: 1850/600/H1240 mm -Weight: 380 kg

Condition: excellent (used), Year of construction: 2002, RAS Multibend Center 79.22 Hfodpfsrxt Axox Aaben Automatic cnc FOLDER / Panel bender Year 2002 Specifications • Working Length: 2160 mm/ 7.09’ ft. • Maximum Sheet Metal Thickness: Steel – (400N/mm2) 2.0 mm • Maximum Sheet Metal Thickness: Stainless Steel – 1.5 mm • Maximum Sheet Metal Thickness: Aluminum – 3.0 mm • Maximum Development Sheet Width: 1500 mm/ 4.92’ ft. • Maximum Four-Sided Fold Height Max: 203 mm • Bending Blade Reach: 180 ° Degrees • Machine Width: 5500 mm approx./ 18.04’ ft. approx. • Machine Length: 7000 mm approx. / 22.97’ ft. approx. • Machine Height: 2500 mm/ 8.20’ ft. Power: 18 kW Frequency: 50hZ Pressure: 6 Bar Weight: 21,000 kg/ 46,297 lbs. approx.

Condition: excellent (used), Year of construction: 2002, RAS Multibend-Center RAS 79.26 Year 2002 Used RAS Multibend Centre CNC Folder Max working 2560mm Max sheet thickness (mild steel) 2.0 (2.5mm) Max sheet thickness (stainless steel) 1.5mm Max sheet thickness (aluminium) 3mm Finished part length min. (w/o corner tools) 200/250mm Finished part length (w. small corners) 380/430mm Finished part length min (w. large corners) 430mm / 480mm Finished part width min. (inside) 150 (140mm) Finished four sided part height max 203mm Side free space corner tools (small/large) 30/ 50mm Folding beam travel range 180 Deg Working height 1000mm Machine width 7700mm Hfedpfxorxt Hqo Aabjn Machine length 5800mm Machine max height 2400mm Weight approx 17000kg Drive power 25kw

Year of construction: 2012, condition: excellent (used), Used Ras 62.25 CNC Folder Model: 62.25 Ras Year 2012 RAS 62.25 CNC folder Capacity: 2540mm x 2.5mm CNC Auto Bending Machine (Year 2012) Hfedjn Tnzfspfx Aabsn Complete with fitted System 6000 Touch screen control (screen recently replaced) 3.2 Metre J shape back gauge Twin Foot Pedal Control MACHINE GUARD SOLUTIONS Light Guards Complete with segmented and straight tools

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, Used 6metre Ras up and down bend cnc folding machine for sale Ras XXL Centre 75.06 System 9002 cnc control RAS TECHNICAL DATA: DIMENSION 75.06 Max. Sheet thickness (Steel 58000 PSI) gauge 16 Max. sheet thickness (Aluminium 29000 PSI) gauge >14 Max. sheet thickness (Stainless Steel 109000 PSI) gauge 18 Working length max. inch 251,97 / 6.4metre Grippers Travel Range inch 0,47 – 29,53 Grippers Positioning Accuracy inch +/- 0,004 Distance between 2 Grippers min. inch 7,09 Stops and Grippers Quantity 8 Free Space in front of the folding be-ams up to degree 300 Working Height inch 37,40 Machine Width inch 59,05 Machine Length without contori cabinet inch 257,48 Machine Height inch 70,87 Weight approx.. lbs 27 600 Compressed air bar 5,5 Drive Power Upper Beam hp 2,95 Drive Power Upper Folding Beam hp 2,95 Drive Power Lower Folding Beam hp 2,95 Speeds: Upper and Lower Folding Beam degree/s 126 Upper Beam inch/s 13,78 Grippers inch/s 13,78 Max. sheet thickness (Steel 400 N/mm2) mm 1,5 Max. sheet thickness (Stainless Steel 750 N/mm2) mm 1,25 Max. sheet thickness (Aluminium 200 N/mm2) mm 2,0 Hedpjgpk R Esfx Aabsfn Working length max. mm 6400 Grippers Travel Range mm 12-750 Grippers Positioning Acuracy mm +/- 0,1 Distance between 2 Grippers min. mm 180 Stops and Grippers Quantity 8 Free space in front of the folding beams up to degree 300 Working Height mm 950 Machine Width mm 1500 Machine Length without control cabinet mm 6540 Machine Height mm 1800 Weight approx.. N 125 000 KG 12 500 Compressed air bar 5,5 Drive Power Upper Beam kW 2,2 Drive Power Upper Folding Beam kW 2,2 Drive Power Lower Folding Beam kW 2,2 Speeds: Upper and Lower Folding Beam degrees 126 Upper Beam mm/s 60 Grippers mm/s 350 Ideal for the manufacture of roofing products