Used Robot Milling Machine for sale (66,567)

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 35 kg, arm reach: 1,831 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (A-Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: three-phase, repeat accuracy: 0.03 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information: Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-35P is based on Fanuc M-20iD/35 robot arm adapted for handling pallets or vises. It consists of: 1) Robot: Fanuc robot M20iD/35 6-axis vertical robot Load capacity 35 kg / reach 1831mm R-30iB Plus controller A-cabinet I/O modules; DI32 / DO32 DCS Dual Check Safety Position (J567) Soft Float (J612) Touch Skip (J921) Singularity Avoidance (R792) User Socket Messaging (R648) Karel (R632) 2) Loader Table: Compact but heavy loader table with front entrance. Table size: 980 x 700 mm Docking station with four pockets Three locating pins for quick pallet exchange ReeR safety light curtain, Cat. 4 Three control buttons LED status beacon Electrical cabinet and cables included Bjdpfx Ahs Af Uxxodelp 3) Pallet Rack The URC-35 Palletizing cell can be equipped with 1 or 2 large-capacity racks with 42 pockets. Large rack (42 pockets) - included as standard Second large rack (42 pockets) - optional 4) Vices & Zero-point clamping system The system is designed for: - Lang Vices (not included in price) - Lang Zero-Point clamping system (not included in price) - Note: it can also be implemented to work with pallets instead of vices (not included in price) 5) Safety Options: Cage (standard) ReeR safety light curtains (cat.4) on Loader table (standard) Plexiglass cover on Racks (standard) ReeR Mosaic M1 safety controller (standard) 6) Interface to the Haas machines Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged) Communication CNC < = > URC (I/O, safety, program call -> all via Ethernet cable communication) Preparing for a Clamping device Preparing for a PAD Preparing for an external Air Blow 7) Gripper Configuration The Teximp Gripper Interface includes everything needed for gripping the vices Gripper carrier Schunk Gripper JGP-P 160-2 Stroke per jaw [mm] = 8 Recommended workpiece weight [kg] = 24.5 Preparation for vice/pallet clamping Sensors for gripper state detection - clamped/unclamped Blower nozzle Laser sensor (for vise presence detection) 8) Automatic Door system URC-35 Palletizing can be equipped with a pneumatic auto door (PAD) for selected Haas machines. Available PAD models include: a) PAD-HaasUMC-side b) PAD-HaasVF-side c) Can be made for other machines (not included in price) 9) Programming Option (HMI) Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Important Note: Operators can easily assign different .nc machining program to each Vise via HMI, robot calls assigned program on CNC machine by scanning QR code on each vise! - Easy visual programming - No additional hardware required Note: - We provide transport, installation, commissioning and operator training at additional cost. - You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.

Condition: used, Year of construction: 1980, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: Universal bed-type milling machine Machine weight: approx. 11 tons Travel distances X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 630 mm Spindle and tool holder Spindle taper: SK 50 Speed range: 20–2,000 rpm Horizontal milling spindle: SK 50 Vertical milling spindle: SK 50 Feed rate and rapid traverse Feed rate: 10–6,000 mm/min Rapid traverse: 6 m/min Work table Table load: max. 5,000 kg Blodpfx Aho Aa Ahrodop Control system Control system: Philips NC 6664 Axes: 4 Program memory: available Rotary table Rotary table: NC-controlled Diameter: 630 mm Electrical data Total power requirement: 18 kW Control cabinet Control cabinet dimensions: 1,800 × 530 × 2,000 mm Dimensions Space requirement: approx. 4.6 × 2.9 × 2.62 m EQUIPMENT NC-controlled rotary table Hydraulic tool clamping Coolant system Chip conveyor Horizontal milling spindle Vertical milling spindle Separate control cabinet Safety emergency stop Important note: The machine vice, if visible in the pictures, is not included in the scope of sale and delivery!

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, We are selling a used 3-axis machining center, WAGNER WMC 1100, in very good condition. The machine was manufactured in Taiwan. It was only used for the production of individual parts and therefore has very few operating and power-on hours. Technical data: Table: 1300 x 600 mm Table load: 500 kg X-axis: 1100 mm Y-axis: 650 mm Z-axis: 600 mm Blodpfx Ae Agwvuohdop Control: Siemens 828D Tool positions: 24 Spindle head: BT-40 Spindle speed: 8000 rpm Accessories: 1 x Chip conveyor 1 x Band filter 1 x Measuring probe 1 x Broken tool detection 1 x Coolant system 1 x Handwheel

Condition: used, Year of construction: 1979, Table dimensions 1300-800 mm Weight 4,7 to. Year 1979 x-travel 1000 mm angular milling head ja documentation ja serial number 733 weight of the machine ca. 4,7 t Bjdpfx Ahszhcizjdjlp

Condition: ready for operation (used), Year of construction: 2000, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 28217, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, overall weight: 18,500 kg, The combination of the Zayer 20 KF 3000 machine, the Heidenhain TNC 426 control system, and a swivel universal head (Huron type) transforms this milling machine into a versatile and powerful production hub. The swivel head completely eliminates the biggest drawback of large machines – the need to constantly reposition and re-clamp heavy workpieces for machining at different angles. Here’s how precisely this head works with the Heidenhain system and what possibilities it offers. Kinematics and capabilities of the swivel head. The head in ZAYER machines consists of two inclined dividing planes that rotate relative to each other. This design allows for: Transition from vertical to horizontal: In a few moments, you can change the machine from a vertical machining center to a horizontal milling machine. This makes it possible, for example, to simultaneously machine the top of a workpiece and, a moment later, mill its sides. Milling at any angle: The head allows you to position the spindle in space at unusual angles, which is crucial for machining inclined surfaces, chamfering large plates, or creating converging pockets. Enormous rigidity: Although the head is movable, its design locks with tremendous force (mechanically or hydraulically). The machine does not lose any of its ability to perform heavy rough machining (so-called “hogging” with a large chip). Cycle 19 and PLANE in Heidenhain TNC 426 – The magic of software. The biggest challenge with a swivel head is the mathematics – when you tilt the tool, the zero points in the X, Y, and Z axes change. Heidenhain TNC 426 solves this automatically using dedicated geometric functions: Cycle 19 (Machining Plane): You inform the control system of the angle at which you have physically rotated the head. The computer immediately recalculates the entire coordinate system. The tool moves in the axis at an angle, and you program as if you were working on a flat surface. Coordinate transformation: You don't have to manually calculate the tool offset after rotating the head. The controller knows the exact dimensions of the machine's kinematics and automatically corrects the position of the X, Y, and Z axes. Angular drilling: After calling Cycle 19, the standard drilling cycle (e.g., deep drilling) automatically performs the feed movement in the inclined axis – the operator writes the program in the Z axis, and the machine physically moves with a combination of the X, Y, and Z axes. Production benefits in the workshop. Machining 5 sides of a workpiece from a single setup: You place a 5-ton steel block on the table. You clamp it once. By rotating the head, you machine the top and all four sides without moving the workpiece with a crane. This guarantees perfect maintenance of geometric tolerances (perpendicularity and parallelism of the surfaces). Time savings and safety: Repositioning a large workpiece on the table often takes hours and carries the risk of accidents or damage to the table. With this head, you only reposition the tool – manually using dividing plates or in an automatic version from the program. Bljdpfx Aozrd Tvshdep

Condition: used, machine/vehicle number: 2820-0419, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: CNC-controlled tool milling machine Condition: good Machine weight: approx. 1.9 kg Travel distances X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 (340) mm Work table Table surface: 710 × 430 mm Spindle and milling head Speed range: 40–4,000 rpm Head swivels: ±90° Quill stroke: 80 mm Spindle mount: SK 40 Feed rate and rapid traverse Feed rate range: 0.2–3,600 mm/min Rapid traverse: 4.0 m/min Feed axes: 3 axes Control system Control system: Contour 3 / Dialog 4 Performance data Total power consumption: 5.5 kW Dimensions Space requirement: approx. 2 × 1.4 × 1.8 m Bjdpfx Ahs Aa Acvsdslp EQUIPMENT Rotatable vertical head ±90° Hydraulic tool clamping Automatic central lubrication Coolant system Safety emergency stop Machine lighting Chip guard enclosure with chip collection tray Mobile control panel Electronic handwheel

Condition: used, Year of construction: 1994, spindle diameter: 50 mm, spindle speed (min.): 6,000 rpm, We offer a used WEINIG Univar 10/2 profiling and rabbeting machine, primarily designed for rabbeting windows, doors, and similar profiles. The machine is equipped with two hydraulically controlled, right-hand precision spindles that can be raised and lowered, allowing for the clamping of three sets of tools on top of each other. The lifting mechanism uses a U-shaped motion, enabling the machining of short workpieces. The individual tool positions can be finely adjusted in the radial direction. To ensure high-quality machining without material tear-out, the first spindle allows the selection of either a left-hand or right-hand rotation direction. It is equipped with a mechanical brake for changing the direction of rotation. Bledj Aguv Eepfx Ahdjp During the machining of the last 100 mm of each frame end, the spindle plunges into the wood with the corresponding matching tool, thereby reducing material tear-out in the corners of the frame. The construction also includes an additional support rail for large-format frames. Technical equipment and functions: * 2 hydraulically controlled, right-hand precision spindles that can be raised and lowered * Ability to clamp 3 sets of tools on top of each other * U-shaped lifting mechanism for machining short workpieces * Fine radial adjustment of individual tool positions * Central lubrication of spindle units * Selection of left-hand and right-hand rotation for the first spindle * Mechanical brake for changing the direction of rotation * Additional support rail for large-format frames * Continuous, chainless feed using rubber-coated rollers with a very short pitch * Height adjustment of the feed beam using a ratchet * Program control with a selector switch for a single program * Automatic change of stroke for two workpieces in the tenon-rabbet section * Ability to program up to 4 workpieces, or 4 sides, for longitudinal profiling and rabbeting The machine does not include machining tools.

Condition: used, Year of construction: 1990, TECHNICAL DETAILS Travel ranges X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Work table Table size: 680 × 380 mm Control system CNC control: Philips 432 Feed rate and rapid traverse Feed rate range: 1–3,000 mm/min Rapid traverse: 6 m/min Spindle and tool holder Tool holder: ISO 40 Speed range: 20–3,150 rpm Main drive: 5 kW Milling head Swivel range of milling head: ±90° Performance data Total power requirement: 12 kW Bedpsz S Namsfx Ahdolp Machine weight: approx. 1.2 t Dimensions Space requirement: approx. 2.5 × 2 × 2 m EQUIPMENT Swiveling milling head Philips 432 CNC control

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 from a training workshop Technical data: >> Machine no. 57752/08 >> Swiveling rotary table >> Speed: 40 - 2000 rpm Bodpfx Ae Ahq Ekehdslp >> Feed for 2 axes >> Drive power: 1 / 1.5 kW >> Travel ranges X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill – SK40 >> Spindle brake >> Collet system S20x2 >> Weight approx. 700 kg >> Coolant system About the machine: Offered is a Deckel FP1 universal milling machine in very good original condition. The Deckel has very little backlash and all spindles can be moved easily. The machine has a brake motor; the control cabinet was modified by the previous owner. The BGR inspection is no longer valid. An oil change has been performed. The FP1 comes from a large company and was only used for training purposes. Take advantage of the opportunity to inspect and test this machine on site while it is powered on. The machine is available immediately. For an additional charge, the machine can be equipped with a new K&C digital display.

Year of construction: 2010, condition: used, CNC control system FIDIA with handwheel; travel ranges: X-axis approx. 11,500 mm, Y-axis approx. 1,550 mm, Z-axis approx. 2,250 mm; clamping table, length x width x height, 2 pieces, each approx. 2,000 x 2,000 mm; table load max. 1,000 kg; milling spindle, spindle power S1 / S6 approx. 7.4 kW / 12 kW, spindle speed 16,000 rpm, tool holder HSK 50A, B- and C-axis +/- 210° / +/- 104°, feed rate X-, Y-, Z-axis up to 16 m/min, axis acceleration m/s², machine footprint approx. 14,000 x 2,600 x 3,650 mm, with self-built table, total weight approx. 13,500 kg; NOTE: Fully functional condition, machine has already been disassembled and stored. The machine is already located at a different location in Kartonstraße 2, D-88255 Baienfurt. Free loading FCA D-88255 Baienfurt. Bedpfe Af Nl Ujx Ahdelp

Condition: used, Year of construction: 1986, machine/vehicle number: 2204-0929, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: CNC-controlled tool milling machine Condition: good Machine weight: approx. 2.8 t Travel distances X-axis travel: 560 mm Y-axis travel: 500 mm Z-axis travel: 450 / 390 mm Arbor stroke: 80 mm Work table Table clamping surface: 800 × 460 mm Spindle and milling head Spindle speed: 40–4,000 rpm Spindle connection: ST 40 Swiveling spindle head: ±90° Vertical head: rotatable ±90° Horizontal spindle: available Feed rate Blode Aa Aurjpfx Ahdsp Feed rate: 2–3,600 mm/min Feed axes: 3 axes Control system Control system: Contour 2 Performance data Total power consumption: 4.0 kW Dimensions Space requirement: approx. 2.0 × 2.5 × 2.2 m EQUIPMENT Hydraulic tool clamping Mobile control panel Machine lighting Automatic central lubrication Coolant system Safety emergency stop Chip tray Separate control cabinet

Condition: used, Year of construction: 1985, machine/vehicle number: 2204 - 0469, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: CNC-controlled tool milling machine Condition: good Travel distances X-axis travel: 580 mm Y-axis travel: 400 mm Z-axis travel: 450 (390*) mm Work table Table size: 460 × 800 mm Spindle Spindle speed range: 40–4,000 rpm Spindle taper: SK 40 Spindle drive: 4.0 kW Vertical head: rotatable ±90° Quill stroke: 80 mm Horizontal spindle: available Feed rate and rapid traverse Feed rate range: 2–3,600 mm/min Feed rate: 4.0 m/min Feed axes: 3 axes Control system Control system: Contour 2 Dimensions Bodpfs Aa Atzjx Ahdelp Space requirement: approx. 3.0 × 2.10 × 2.10 m EQUIPMENT Hydraulic tool clamping Mobile control panel Electronic handwheel Automatic central lubrication Coolant system Safety emergency stop Chip tray Separate control cabinet

Condition: used, Year of construction: 1985, machine/vehicle number: 31268, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: universal tool milling machine Machine weight: approx. 6.6 t Travel distances X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Quill stroke: 115 mm Work table Table surface: 900 × 700 mm Table swivel range: ±30° Table tilt range: ±30° Table rotary range: ±45° Spindle and milling head Spindle speed: 30–6,000 rpm Spindle mount: SK 50 Spindle drive: 7.5 kW Milling head: swiveling in 2 axes Feed Feed rate: 0–6,000 mm/min Control Control system: Siemens Sinumerik 3 M Performance data Total power requirement: 32 kW Dimensions Space requirement: approx. 3.8 × 1.8 × 2.9 m EQUIPMENT Separate control cabinet Coolant system Automatic central lubrication Work light Safety emergency stop Blodpfxe Aa At Uj Ahdep

Condition: used, Year of construction: 2017, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2017 Control : Heidenhain TNC 640 Speed : 5000 rpm Movement X/Y/Z : 4500/1800/1300 mm In General: Year of manufacture:2017 Control system:Heidenhain TNC 640 Travel range X/Y/Z:4,500/1,800/1,300 mm Spindle speed:5,000 rpm Tool holder:SK 50 Milling head (spindle): Technology:Diagonal head with gear spindle Index:0.001° Speed:5,000 rpm Tool holder:SK 50 Max. power:43 kW Max. torque:1,045 Nm Coolant supply:Coolant + blast air Working table: Clamping surface:6,000 x 1,100 mm T-slots:6 x 22H12, spacing 140 mm Tool magazin: Technology:Chain magazine Number of stations:40 Tool changer:Double gripper (horizontal/vertical) Max. tool diameter:125 (250) mm Max. tool length:400 mm Equipment: Position measurement systems:Direct scales Chip removal:Chip conveyor Bledpe Ahu Hasfx Ahdjp Coolant supply:Internal coolant system with filter, 20 bar Workpiece measurement:Funk M&H probe Set-up operation:HR 510 electronic handwheel Software option:Adaptive Control

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP3 from a vocational school! Technical data: >> Machine No. 1847 >> Swivel-tilting table Blodpo Agn Inofx Ahdsp >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel distances X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical and horizontal quill - SK-40 >> Collet system S20x2 >> Weight approx. 1300 kg Accessories and equipment: >> Central lubrication About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles can be moved easily. Most of the bellows are new. An oil change has been carried out. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel machine on-site while it is powered up. For an additional cost, the machine can be equipped with a new digital display from K&C.

Condition: ready for operation (used), Year of construction: 1989, operating hours: 2,100 h, functionality: fully functional, thread length: 880 mm, feed length X-axis: 1,000 mm, feed length Z-axis: 100 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 5 m/min, position of the milling head: Horizontal, swivelling, center height: 1,060 mm, type of input current: AC, power of feed motor: 4,000 W, milling spindle length: 200 mm, spindle bore: 90 mm, spindle speed (max.): 400 rpm, spindle speed (min.): 25 rpm, mandrel length: 200 mm, collet bore: 90 mm, clamping length: 880 mm, workpiece diameter (max.): 500 mm, Thread Milling and Gear Hobbing Machine MSZ 5A352ПФ2 The MSZ model 5A352ПФ2 is a universal thread milling and gear hobbing machine, designed for machining splines, worms, and cylindrical gears by milling and hobbing processes. Manufactured in 1984, the machine is intended for industrial applications requiring reliable performance, versatility, and repeatable accuracy. Bjdpfxex Unpve Ahdolp The machine is suitable for workpieces with a maximum length of 1000 mm and a maximum diameter of 500 mm. The maximum machining (spline/thread) length is 880 mm, and the machine supports gear cutting up to module 8, covering a wide range of thread and gear machining tasks. Helix and thread angles up to 30° can be machined, allowing flexible use in mechanical engineering and transmission manufacturing. The milling and hobbing spindle features a 90 mm spindle bore and supports cutting tools with a maximum hob diameter of 160 mm and a maximum hob length of 200 mm. The spindle operates in a speed range of 25 to 400 rpm, providing suitable cutting conditions for different materials and tool diameters. The main drive motor offers multiple power and speed stages (5 / 6.3 / 10 kW at 750 / 1000 / 1500 rpm). The machine is equipped with stepless longitudinal and radial feeds, with longitudinal feed rates from 2 to 100 mm/min and radial feed rates from 2 to 50 mm/min, enabling precise control during machining operations. The milling head is horizontal and swivelling, and the machine allows accurate synchronization for thread milling and gear hobbing operations. With overall dimensions of approximately 3100 × 2270 × 2100 mm (up to 3540 × 2515 × 2100 mm with auxiliary equipment) and a total weight of about 7890–8500 kg, the 5A352ПФ2 features a rigid, heavy-duty construction that ensures excellent stability and vibration damping. The machine operates on three-phase AC power (380 V, 50 Hz) and is equipped with a PU F5007 control system. Condition: *Used machine *Ready for operation *Fully functional *Operating hours: approx. 2,100 h Scope of delivery: *Complete set of change gears *Technical passport (Russian) *Operating manual (Russian) Typical applications: *Thread milling *Gear hobbing (spur gears, worms) *Machining of transmission components *General mechanical engineering *Repair and small- to medium-series production

Condition: used, functionality: fully functional, We are offering a used Metba MB-1 machine for sale. Manufacturer: Metba Machine type: MB-1 Blsdpj Agu R Sofx Ahdop Machine number: 148 Nominal voltage: 380 V Total power: 2 HP If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 with special paint finish and 3-axis digital readout K&C NEW, in excellent condition. Technical data: >> Machine no. 2200-1958 >> Long sliding head >> 3-axis digital readout K&C NEW >> Swivel table with tilting and rotating function >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW Bodpfx Ahe Agwvmsdolp >> Travels X/Y/Z: 500/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical and horizontal quill, extendable - SK-40 >> Collet system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout K&C, newly installed with manufacturer's warranty and operating manual. Display unit: Setting reference points, setting zero points, entering coordinates, switching between mm/inch, absolute or incremental coordinates, circular functions, hole patterns, radius milling functions, etc. >> Coolant system About the machine: Offered is a Deckel FP2 universal milling machine in very good condition. The Deckel has excellent guides and is geometrically perfect. The long sliding head runs smoothly even at maximum speeds. The Deckel has very little backlash and all spindles can be moved easily. The machine has been completely disassembled and repainted. An oil change has been performed. Mechanically and electrically tested. The digital readout from K&C makes working easier and even more precise. Furthermore, you have a 1-year warranty on the new digital readout. Take the opportunity to inspect and test the Deckel on site under power.

Year of construction: 2007, condition: used, CNC control system HEIDENHAIN iTNC 530 with handwheel, travel distances: X-axis approx. 1,500 mm, Y-axis approx. 2,400 mm, Z-axis approx. 800 mm, table dimensions (length x width x height) approx. 2,500 x 1,500 x 530 mm, maximum table load 500 kg, milling spindle power 4 kW, spindle speed 6,000 rpm, tool holder 78/8 flange, feed rate X, Y, and Z axes 20 m/min, axis acceleration 1.5 m/s², machine footprint 6,000 x 4,000 x 3,900 mm, total weight approx. 8,000 kg, NOTE: Fully functional condition, regular maintenance performed by the machine manufacturer! The machine is already located at a different site at Kartonstraße 2, D-88255 Baienfurt. Free loading FCA D-88255 Baienfurt. Bedpfs Af Nl Hjx Ahdjlp

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. Bledpfxezt Ai Ee Ahdsp with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 from a training center Technical data: >> Machine no. 6884 Bledj Agn Rxjpfx Ahdsp >> Rotary, tilting, and swiveling table >> Speed: 40 - 2000 RPM >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travel distances X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical quill and horizontal quill - SK-40 >> Clamping system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> Coolant system About the machine: A Deckel FP2 universal milling machine in good condition is offered. All spindles can be moved easily. All bellows are new. An oil change has been carried out. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel machine on site while it is powered. The machine is immediately available. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 Blodpfx Ahshik Ezodjp CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: used, Year of construction: 2001, machine/vehicle number: .01720, with CNC control, manufactured by FIDIA, type: C20, travel ranges: X-axis: 2400 mm, Y-axis: 2850 mm, Z-axis: 1000 mm, with automatic tool changer with 20 tool stations, with T-slot clamping plate, size: approx. 2000 x 1800 mm, coolant system. Blsdpfe Af Nlmjx Ahdjp

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Blodpfx As Ad Iuxshdsp TECHNICAL DETAILS Manufacturer: Knuth Model: VH F1 Machine type: Milling machine Machining process: Shank milling MACHINE DETAILS Length: 1,500 mm Width: 1,000 mm Height: 2,000 mm Weight: 700 kg

Condition: excellent (used), Year of construction: 2010, Control system: Heidenhain TNC 124 Bjdpfx Ao Ahw E Djhdelp Travel distances X / Y / Z: 600 / 400 / 400 mm Clamping area: 800 x 425 mm Tool holder: SK 40 Tool clamping: hydraulic Spindle speed: 1 – 4500 rpm Feed rates: 0 – 2000 mm/min Rapid traverse rate X + Y: 5000 mm/min Rapid traverse rate Z: 4000 mm/min Tailstock, vertical travel: 60 mm Weight: approx. 2000 kg