Used Rope for sale (4,420)

Condition: excellent (used), 1 piece shooting head, dimensions see photo, very good condition, ready for immediate use Ndjdpfjd Tx A Ajx Aanof

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the companies operations. Materials are firstly delivered via a picking belt and metal detection tunnel, from a cage tipping device to a large Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water, and then materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge with the finished materials then conveyed to a ZigZag air separator, before being blown to the cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment. Ndodjxcnxdspfx Aanof

Condition: used, Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, feed length X-axis: 24,000 mm, feed length Y-axis: 450 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 400 m/min, total length: 28,000 mm, drilling capacity: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, type of input current: three-phase, control cabinet width: 1,620 mm, control cabinet length: 450 mm, total height: 3,400 mm, total width: 2,600 mm, control cabinet height: 2,200 mm, overall weight: 11,200 kg, workpiece weight (max.): 8,000 kg, positioning accuracy: 1 mm, spindle speed (min.): 200 rpm, rotational speed (max.): 4,000 rpm, spindle speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, travel distance X-axis: 600 mm, table width: 1,000 mm, drill diameter: 40 mm, compressed air connection: 8 bar, roll diameter: 108 mm, table length: 1,000 mm, table height: 710 mm, power: 21 kW (28.55 HP), Equipment: rotational speed infinitely variable, Complete automatic drill-saw street for profiles APS Europe Profile steel drilling machine RDR-1036 and Band saw RS-1300 Increase your productivity with this complete automatic drill-saw street for profiles. Designed to work efficiently and accurately with different profile steel materials. Nodjtnf Iyopfx Aanodf Price does not include disassembly, assembly, transportation and import duties. Please contact us for more information about this machine.

Condition: excellent (used), For sale: Professional dot peen marking machine PRO PEN P5000 (GravoTech Marking SAS), distributed by HAHN+KOLB Gruppe. This is a fully industrial-grade device designed for permanent marking of metal and plastic parts—serial numbers, logos, codes, and production markings. Specifications: • Model: Propen P5000 Pn/d • Year of manufacture: 2010 • Power supply: 100–240 V, 50/60 Hz • Power: 150 W • Operating pressure: 5.5 bar (pneumatic supply) • Manufacturer: GravoTech Marking SAS, France • Operator panel with touchscreen + HP keyboard • Robust worktable with guides. The machine is complete, fully functional, and ready for operation. Ideal for workshops, production plants, tool rooms, and wherever quick and precise permanent marking is required. Very good condition—well-maintained unit with minimal signs of use. Ndsdsw R Spqopfx Aansf

Condition: ready for operation (used), Submersible propeller pump type ABS VUPX, 2000 l/s, 160 kW Nedpex H Nrvefx Aanodf

Condition: like new (used), Year of construction: 2001, AMADA EUROPE 245 Turret Punch Press Technical Specifications: - CNC Control: FANUC 18 i-P - Pressing force: 20 tons - Max. punching format without repositioning with a 31-station head: 1020 x 1290 mm (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - Max. sheet size with repositioning: 1020 x 2540 mm - Max. sheet size with repositioning + 1 rotation (optional): 1500 x 2540 mm - Max. sheet thickness on ball table: 6 mm - Max. sheet thickness on brush table: 3 mm - Max. permissible table load: 100 kg - Punching accuracy: ±0.1 mm - Positioning accuracy: ±0.07 mm - Number of pneumatic clamps: 2 - Number of simultaneously controlled axes: 3 (X, Y, C) - Turret rotational speed: 25 rpm - Strokes per minute, spacing 25.4 mm, cylinder stroke 6.5 mm: 220 spm - Strokes per minute, incremental punching 1 mm, cylinder stroke 6.5 mm: 480 spm - Minimum programmable increment: 0.001 mm - Number of tool stations: 31 (including 3 indexable stations) - Max. tool diameter: 88.9 mm - Indexable stations: 2x 1-1/4", 1x 2" - Max. sheet thickness for indexable station: 3 mm - Slider: hydraulic - Lower dead point of slide feed: 4 programmable positions - Working table size: X=600, Y=400 mm - Memory capacity: 64 KB (~63 programs) - Graphic display: 10.4" LCD - Stopping time: 295 ms - Air pressure: 5 bar - Air consumption: 250 Nl/min - Oil capacity: 160 L - Light curtain (3 beams): standard in European countries - Installed power: 27 kW - Machine dimensions: L=4460 mm, W=2750 mm, H=2130 mm - Transport dimensions: L=4820 mm, W=2500 mm, H=2414 mm - Machine weight (AMADA EUROPE 245): 10,000 kg - Operating hours: 35,000 hours Year of manufacture: 12/2000, installation: 2001 Single owner, complete service book with full machine history. The machine is in perfect condition, operated only on thin sheets. Start-up warranty. Operator training included in the price. Contact person: 500114006 Ndjdshvaaaspfx Aanof Best regards.

Condition: new, maximum load weight: 28,080 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,610 mm, loading space width: 2,460 mm, total width: 2,460 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer K.SPO flatbed tarpaulin - Libner Open Box push bar Nsdpfsw A D Eiex Aanodf Immediately available! Vehicle: ? Interior length 13,610 mm ? Interior width 2,460 mm ? Standard saddle height 1,150 mm ? Light Open Chassis + Semi Trailer ? Steel chassis made from high-quality steel ? Total technical weight 39,000 kg Axles/tyres ? BPW axles with disc brakes 430mm ET 120 ? Disc brakes ? Mechanical supports ? Bridgestone 385 / 65 R 22.5 ? Steel rims ET 120 ? accessories ? 1x toolbox ? Open side collision protection Body / Floor ? Container locks ( Twistlocks ) 6x2 ? For containers 1 x 20 ft in the middle, 2 x 20 ft and 1 x 40 ft container ? Hardwood floor ? Platform trailer with sliding tarpaulin frame ? Side stanchion pockets 8 pieces ? 24 stanchions 1,500 mm each Lighting ? 4 round 3-chamber LED rear lights ? 2x work lights For further information please do not hesitate to contact us

Condition: new, Year of construction: 2026, General information Field of application: Construction Weights Empty weight: 1.900 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 18~28ton excavator Working pressure: 320 bar Cutting power: 320 kN Required hydraulic flow: 180 l/min Additional information Please contact Ö. Inalkac for more information AJCE Europe APL20RV pulverizer with hydraulic rotation is a top quality product. APL20RV pulverizer/crusher is 1850kg and fits on 18~28ton excavator. APL20RV pulverizer/ crusher has changable tooth plate and has also speed up valve. Contact us for details. Ndodpfxsqmnbwo Aanof concrete crusher/ Pulverizer/ broyeur/ cisaille/ HYDRAULISCHE BETONPULVERISIERER/ MEHRZWECKSCHEREN/ ABBRUCHSCHEREN/ TRITURADOR DE HORMIGÓN HIDRÁULICO/ TRITURADOR DE HORMIGÓN/ CIZALLA DE DEMOLICIÓN/ DRVICE/ ABBRUCHZANGE/ PULVERISIERER

Condition: used, mileage: 1,69,275 km, power: 70 kW (95.17 HP), first registration: 03/1969, fuel type: diesel, tire size: 9.00R20, axle configuration: 4x2, wheelbase: 4,800 mm, fuel: diesel, gearing type: mechanical, suspension: other, total length: 7,250 mm, total width: 2,300 mm, Year of construction: 1969, = Additional options and accessories = - 4x2 - Leaf suspension Nedpfx Aaox E Algjnsdf = Further information = Tire size: 9.00R20 Front axle: Steered; left tire tread: 50%; right tire tread: 50%; suspension: leaf suspension Rear axle: Twin tires; left inner tire tread: 50%; left outer tire tread: 50%; right inner tire tread: 50%; right outer tire tread: 50%; reduction: single reduction; suspension: parabolic leaf Unladen weight: 4,130 kg Payload: 7,870 kg Gross vehicle weight: 12,000 kg Damages: None

Condition: excellent (used), functionality: fully functional, total length: 600 mm, total width: 400 mm, total height: 320 mm, overall weight: 3 kg, Euro Standard Plastic Containers 600x400x320 mm – Silverline – Sold as is ISC Recycle offers a large stock of Silverline industrial plastic containers – Euro standard 600x400 mm, height 320 mm. Robust and reliable, these containers are ideal for internal logistics, storage, transport, or automated systems (conveyors, flow racks, stacker cranes, etc.). 🔹 Technical Specifications: Brand: Silverline Dimensions: 600 x 400 x 320 mm Volume: 60 litres Material: Polypropylene (PP) – sturdy and impact-resistant Reinforced base and solid side walls Thermal resistance: from -40°C to +90°C 100% recyclable Sold as is (pre-owned containers inspected, in very good condition) 🔹 Available Options: Container dividers available: Small dividers: €0.20 / unit Large dividers: €0.50 / unit Can be sold by pallet (24 containers per pallet) Total stock: over 3,000 units 🔹 Volume pricing: €6 excl. VAT / unit – single unit €5.5 excl. VAT / unit – from 1,000 units €5 excl. VAT / unit – from 2,000 units Nedpfx Aoxqdx Asanedf Delivery available or collection on site

Condition: used, Frame press ORMA EUROPA Line voltage 380 V - 50 Hz Control voltage, magnetic components, lamp 110 V Njdpfx Aaowudzbonjdf Main protection 3 x 25 A

Condition: new, Year of construction: 2025, SELF-PROPELLED BITUMEN EMULSION SPRAYER BS-1000SP TM TICAB self-propelled Bitumen Emulsion Sprayer BS-1000-SP is the most powerfull mini bitumen emulsion sprayer among all TICAB mini sprayers. Spray bar 1,5m (7 nozzles) covers up to 2000 sq.m per hour. Tank 1000 L. Repair work in the shortest possible time both on small areas (household areas, alleys) and on the bigger areas. Self-propelled system fits any trailer. Car is needed just to move the BS-1000-SP sprayer to the construction side. It makes using the sprayer much easier and increases its maneuverability. Operate remotely using a joystick. Specifications: Gasoline engine – 16 hp; Productivity – 30 l/min; Spraying width – 1.7 m; Ndjdpevpg Izefx Aansf System cleaning – 3-level, diesel fuel; Self-pumping function of the tank; Installation on a frame or on a trailer at the customer's request; Heating system of the emulsion tank; Tank – 1000 l; Possibility of connecting an extra compressor for spraying bar cleaning; Thermal sensor – mechanical; Burner – propane; Hand spraying rod; Self-propelled traction hydraulic wheel.

Condition: used, Year of construction: 2003, Used Wrap Around Packer BAUMER EUROPEA 510 Plexiglass Protection of the Wrap Around Baumer Europea 510 Within the bottling industry, paramount attention is given to operator safety. The Used Wrap Around Baumer Europea 510 with Divider Cosmopack is equipped with plexiglass shields, providing a secure work environment. Moreover, this feature significantly enhances safety conditions, reducing potential hazards.  Electrical System Adhering to CEE Standards The electrical system meticulously adheres to stringent CEE regulations. Consequently, this guarantees the machinery’s reliable and safe operation, in strict alignment with industry standards. Furthermore, this compliance ensures optimal performance and minimizes the risk of electrical malfunctions. Njdpfjvgt Tlox Aansdf Achieving a Remarkable Production Speed of Up to 30 Cartons per Minute An impressive feature of this machinery is its ability to achieve a remarkable production speed. Specifically, it can reach up to 30 cartons per minute. This remarkable speed facilitates a consistently high work rate, promoting efficient production.  Technical Specificationsof the Wrap Around Baumer Europea 510 The correct operation of the machinery necessitates specific electrical power requirements. Specifically, a voltage of 380V at 50Hz, incorporating three-phase, Neutral, and Ground connections, is essential. Additionally, a 24V auxiliary voltage is provided to support the machinery’s component operation. Moreover, these detailed technical specifications guarantee precise power supply and compatibility. Installation Power of 27 Kw Guarantees Reliable Performance An impressive feature of this machinery is its substantial installed power capacity. In fact, it boasts an installed power rating of 27 Kw. This notable power capacity ensures that the machinery can efficiently handle the most demanding workloads. Consequently, this translates into consistently dependable performance. Maintaining Operational Stability with a Dynamic Pressure of 6 Bar To ensure operational stability throughout the bottling process, the machinery maintains a dynamic pressure of 6 bar. This critical feature substantially contributes to high-quality results. Additionally, it promotes a consistent and reliable workflow, minimizing potential disruptions. Tailoring Your Machinery with Customizable Operator Side Configuration The Used Wrap Around Baumer Europea 510 with Divider Cosmopack offers a high degree of flexibility. Specifically, it allows for the configuration of the operator side, which can be positioned either on the right or left. This remarkable feature empowers customers to tailor the machinery to their unique production facility requirements. Consequently, it underscores the machinery’s adaptability and suitability for various operational settings. It is imperative that customers communicate their preferred operator side configuration when making their purchase, as this customization greatly enhances the machinery’s usability and integration into existing workflows.

Condition: used, machine/vehicle number: 83040, Projection: 150 mm Inspection height: 200 mm Space requirement: 350 x 600 x 1410 mm Njdpsb Dkh Nsfx Aanjdf

Condition: excellent (used), Year of construction: 2001, Purlux Europe Year: 2001 Minimum format: 75 x 148 mm Maximum format: 300 x 440 mm Max speed: 10.000 / h Nsdpsut Trkofx Aanedf 6 station cover feeder Stitching (4 heads) 3 knive trimmer with middle cutting (can produce 2 A5 in same time) In production Available immediately

Condition: new, Year of construction: 2025, Weights Empty weight: 3.300 kg Functional CE mark: yes Nedpfxjv Nhv He Aanedf Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Reference number: 4 Other information Fits to following machines: 28-45TON Delivery terms: FOB Transport dimensions (LxWxH): 250015001,2 Production country: KR Additional information Please contact Ö. Inalkac for more information We offer you new AJCE AVH40ST Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 28-45TON Weight: 2800 kg Working pressure: 180~ 220Bar Oilflow: 200 l/min Centrifugal Force : 602 kN Frequency: 2700 rpm Eccentric moment: 6 kgm AVH40ST is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H,I Beams Cheaper , Solar Pile, Safer, Quicker than traditional Pile 40ST is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem.

Year of construction: 2017, condition: ready for operation (used), Reflow oven in operational condition. Ask for additional information. Nodpew Hfp Rsfx Aanodf Located within EU.

Condition: new, Excavator class: 14.0 - 20.0 ton Weight: 1357 kg Beat rate: 350 - 650 bpm Working pressure: 150 - 170 kg/cm Ndjdpfslqakrox Aanef Oil volume flow: 90 - 120 l/min Chisel diameter: 125 mm All models are supplied with a chisel, hose set and tool box.

Condition: used, Year of construction: 2003, Used Baumer Wrap Around Packer 2003 The Baumer wrap around packer is a reliable and efficient piece of packaging equipment that is widely used in various industries. This particular model, the Europea 510, was manufactured in 2003 and has been well-maintained over the years. It is in excellent working condition and is ready to be put to use in your production line. Nsdpfx Aaovlnvxsnedf Whether you need to pack small items or large ones, this wrap around packer is a versatile and effective solution that can handle a wide range of packaging needs. Its high-quality construction and reliable performance make it a valuable addition to any business looking to improve their packaging efficiency and productivity.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Circular Knitting Machine Interlock Santoni mod. Pulsar Open MV Diam. 30" No. tracks: 2 on cilinder 2 on plate No. of Feeds 84 No. of Needles 3792 Njdpfx Aommcqmeanjdf Gague 40 *Positive feeding units Memminger MPF L1 – 84 pcs. * Lycra feeding units MER 3 – 21pcs *Automatic lubrication device Uniwave *Yarn input measuring device *Yarn feed stop motion, needle break detectors *Open width frame

Condition: used, Year of construction: 2001, machine/vehicle number: 258116, Working hours machine: 36101 h Max. punching force: 200 kN Working range punching: 2000 (4000) x 1270 mm Control: Fanuc 18-P Length: 6190 mm Width: 5000 mm Height: 2450 mm Machine weight: 12000 kg Nsdpfxevmfzzj Aanedf Standard configuration Traversing speed X/Y: 65 / 50 m/minAxis simultaneous: 82 m/min Position deviation: +/- 0.1 mm Number of turret stations: 31 of which AutoIndex stations: 3 (2 x B, 1 x C) Turret rotation speed: 25 1/min 2 Max. number of punching strokes: 520/min Machine frame: Bridge frame Press drive: hydraulic Drives turret + table drive: AC servo motors Clamping of clamping claws: pneumatic Electrical connection: 400V / 50Hz Electrical consumption machine: 30 kVA Compressed air consumption machine: 6 bar, 250 l/min  Extended machine accessories

Year of construction: 2017, condition: used, functionality: unexamined, SMT reflow oven Condition as follows: - Transport OK - Needs cleaning - Basic functionality OK - Forced cooling not tested - Seals should be replaced and a new lambda probe is required Immediately available Ndodpjxbp Nbefx Aanef

Year of construction: 2009, condition: not inspected (used), Reflow oven in operational condition. R to L configuration with SMEMA. Njdpfx Aovfp Nmjanodf Ask for additional information!

Condition: used, Power supply systems, construction site emergency lighting, escape sign luminaires, escape route luminaires, emergency and escape route lighting, emergency lights, escape routes Nsdpjfhmn Usfx Aansdf -Emergency lighting with: charger and controller and batteries -Dimensions: 630/390/H260 mm -Weight: 25 kg

Condition: good (used), first registration: 02/2013, loading space length: 7,950 mm, loading space width: 2,280 mm, loading space height: 1,350 mm, color: grey, Year of construction: 2013, Unladen weight: 1,900 kg Payload: 4,800 kg Gross vehicle weight (GVW): 6,700 kg Loading platform height: 105 cm APK (Technical inspection): New MOT at delivery Technical condition: good Ndedpfsxfcgusx Aanof Visual condition: good Damages: none Price: On request = Company information = Nidro cars Holland is located in the centre of the country and is the right address for purchasing your car, van, or truck. The indicated price is the "internet take-away price." For any questions or to arrange a test drive, please contact us: SEE OUR ENTIRE STOCK AT All types of trade are possible with us! (Our advertisements are prepared with great care, but no rights can be derived from their content).