Used Rope for sale (656)

Condition: ready for operation (used), A complete UPG system for polyester resin granulate production is available. 1) High-speed Henschel fluid mixer FM 350C, speed: 1500 rpm, heating unit: Lauda. 2) Raw material supply system with 6 bunkers, screws and vibrating chutes. 3) Conveying system with a collecting tank located 9m above the mixer and a Demag 4t rope hoist. 4) Schenk fluidized bed cooler. 5) Engelsmann ED 250/4 flat bed screen. 6) Alpine B40/63 RO granulator. 7) 2 annular gap compactors Siemens. 8) 2 Kessler & Luch blowers, volume flow: 7000m³/h. 9) Aerobic filter, filter capacity: 4000m³/h. Documentation available. On-site inspection is possible. Lasdpfx Apswk Nk Tsdeg

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: 152-026710, overall weight: 3,000 kg, total height: 5,593 mm, total width: 1,340 mm, load capacity: 5,000 kg, power: 4.63 kW (6.30 HP), main lifting speed: 4,000 mm/min, fine lifting speed: 12 mm/s, throat depth: 4,000 mm, working height: 4,500 mm, operating hours: 20 h, Equipment: documentation/manual, 5 t pillar-mounted slewing crane with electric hoist and electric slewing drive Manufacturer: ABUS Kransysteme GmbH Type: VS 660 pillar-mounted slewing crane with electric chain hoist / wire rope hoist GM 1000.5000 H-162.41.6000.6.E130.20 Year of manufacture: 2023 Serial No.: Crane: 152-026710 Trolley: 250-123870 For sale is a like-new pillar-mounted slewing crane with a lifting capacity of 5,000 kg and a reach of 4,000 mm. The system was put into operation at the end of 2023 and has only been used very little. According to the available remaining useful life calculation, only 20 operating hours have been recorded up to April 2025, resulting in a remaining reserve of approximately 1,598 hours or a projected remaining useful life of over 30 years. The crane features an electric slewing drive, an electric trolley, and a two-stage hoist. Operation is conveniently performed via a pendant control. The system is equipped with a load indicator system (LIS-SV), upper and lower hoist limit switches, and the associated inspection and conformity documents. Scope of supply: * Complete pillar-mounted slewing crane * Electric slewing drive * ABUS trolley * ABUS wire rope hoist * Load hook 5 t * Crane inspection book * Declaration of Conformity Ledpfx Apezd Sqajdoag * Remaining useful life calculation * Existing technical documentation Condition: Used, very good condition, low operating hours, regular inspection records available. System is visually and technically well-maintained. Photo of the assembled system is available. Location: Dresden Loading: Loading onto a suitable transport vehicle is included in the purchase price. Inspection: An inspection of the system is expressly desired and possible by appointment. Technical documents and further images can be provided upon request. Subject to prior sale and errors. * Lifting capacity: 5,000 kg * Reach: 4,000 mm * Crane type: VS 660 * Pillar diameter: 660 mm * Underside of boom: 4,983 mm * Hook travel: 6,000 mm * Crane classification: H2 / B3 * Hoist motor group: 2m / M5 * Operating mode: Indoor operation * Slewing drive: electric, two-stage * Slewing speed: 0.15 / 0.60 rpm * Hoisting speed: 0.7 / 4 m/min * Trolley travel speed: 5 / 20 m/min * Operating voltage: 400 V / 230 V, 50 Hz * Total connected load: 4.63 kW * Total current consumption: 12.07 A * Load indicator system: LIS-SV * Hook: Single hook DIN 15401, 5 t * Weight of boom: approx. 869 kg * Weight of pillar: approx. 872 kg * Weight of trolley: approx. 356 kg * Total weight of system: approx. 2,100 kg

Condition: used, functionality: fully functional, machine/vehicle number: 001652U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 17,500 mm span x 6,300 kg capacity. Ref. 001652U * Stored indoors * Technically 100% sound and inspected All our new and used cranes, which we supply assembled, come with a warranty! We can also supply our cranes with the following options: * Adjustment of length and/or height and, if desired, repainting * Power rail / conductor bar * Radio remote control * Tandem control * Assembly and inspection You can also contact Jan Reiling B.V. for: Lsdpfx Aszik Rcepdjag * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, see the Jan Reiling B.V. website. Cranes, overhead crane, gantry crane, workshop crane, warehouse crane, hoist, crane, hall crane, bridge crane, workshop crane, storage crane, lifting equipment, cranes, universal crane, hoist. Overhead crane, overhead crane. Single-girder crane, single girder. Chain hoist, chain hoists.

Condition: used, functionality: fully functional, machine/vehicle number: 001658U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 18,100 mm span x 6,300 kg capacity. Ref. 001658U * Stored indoors * Technically 100% operational and inspected All our new and used cranes, which we deliver fully assembled, come with a warranty! We can also supply our cranes with the following options: * Adjustment of length and/or height and, if required, repainting * Power rail / conductor bar system * Radio remote control * Tandem control * Installation and inspection Jan Reiling B.V. also offers: * New lifting equipment Ledpfx Aszilbpspdeag * Spare parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall cranes, bridge cranes, workshop cranes, storage cranes, lifting equipment, cranes, universal crane, hoist. Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001667U, load capacity: 10,000 kg, For sale Used Abus single-girder overhead crane, approximately 14,800 mm span x 10,000 kg capacity. Ref. 001667U * Stored indoors * Technically 100% operational and inspected All our new and used cranes, which we supply with installation, come with a warranty! We can optionally supply our cranes including: * Adjustment of length and/or height, and optional repainting * Power rail / conductor bar * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment Ljdpozilgxofx Apdeag In addition, we have our own stock of approximately 15,000 Demag parts. For more information, see the website of Jan Reiling B.V. Cranes, overhead crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder crane. Chain hoist.

Condition: new, functionality: fully functional, empty load weight: 374 kg, maximum load weight: 926 kg, overall weight: 1,300 kg, loading space length: 2,530 mm, loading space width: 1,520 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ Tipper 250 C S 1.3T NEW VEHICLE Internal dimensions: 253cm x 152cm Side board height: 30cm Loading area height: 80cm Total weight: 1300kg Payload: 926kg Braked tandem axle trailer Overrun brake and parking brake by KNOTT Axle with 1350kg brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side boards with tensioning latch Can be folded down and removed on all sides Galvanized steel floor Support wheel 6 tie-down points Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector Lsdpfx Apezlyptodjag Outline lights at the front Rear lamps with reversing light and triangular reflectors Upper frame mounted on rubber Hand pump with stowable handle Lock for upper frame OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE STARTING FEBRUARY 2026 - Equipment for 100km/h (shock absorbers) - Spare wheel with holder - Loading ramps - Folding crank for rear supports - Complete LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Leaf guard in various heights, also closed - Extension side boards, steel or aluminum, 30cm with tensioning latch - Flat cover with or without bows - High cover 140cm Further accessories available on request! Plus freight to Gera and vehicle registration document 200 € net. Images are for illustrative purposes and may show optional accessories at an extra cost. Have you not yet found the right trailer? We have 50-100 vehicles in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist in axle repairs, also for caravan trailers. In addition, we have a large assortment of spare parts and accessories for trailers from various manufacturers. Visit us online or come by!

Condition: excellent (used), functionality: fully functional, Year of construction: 1983, machine/vehicle number: MBR 1000Kg, Demag ELKE overhead crane, bridge crane, industrial crane Crane available in duplicate!!! Year of manufacture 1983 + 1985 Load capacity / lifting capacity 1 ton - 1000 kg Gauge 6700 mm, overall dimensions approx. 6800 mm With floor control and fine positioning Demag PLV82NF wire rope hoist 1000 kg Lifting height 4.5 m Overall height from top of crane to hook approx. 650 mm Head beam length with buffer approx. 140 cm Crane is dismantled and immediately available Good used condition Laodpfozffmdjx Apdjg Column-mounted swivel cranes and wall-mounted swivel cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: new, DEMAG traverses with rope pulleys for Lasdpfx Apju U Nhvedsg P Train / DR / MDR / DH

Condition: new, DEMAG rope pulleys / rollers - 19 pieces: 6 pieces diameter 180 mm. / inside 40 mm. 2 pieces - 260 mm. / 45 mm. Lajdpsu U Raysfx Apdjg 6 pieces - 260 mm. / 90 mm. 1 piece - 310 mm. / 90 mm. 4 pieces - 410 mm. / 90 mm.

Condition: good (used), Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm Lasdoxbd Ixjpfx Apdsg -Length: 24 m -Transport dimensions: 400/400/H100 mm -Weight: 14.5 kg

Condition: good (used), Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 10 mm -Length: 10 m Laodpfoxbd Rtox Apdsg -Transport dimensions: 370/330/H130 mm -Weight: 3.9 kg

Condition: used, Year of construction: 1993, Used machine Year of construction 1993 Automatic frame press Working area 3550 x 2400/2600 mm pressure range 120 bar Pressure per 21000 N/kp Cylinder stroke vertical 250 mm, horizontal 20 or 80 mm Automatic control Electrical connection Lodpsw I Ui Ujfx Apdeag with medium pressure bar Special equipment: Impulse "Open press" Vertical positioning device Width compensation allowance for 1 MB 1 additional horizontal pressure cylinder Spring weight compensation Work safety device pull rope Installation dimensions 5150 x 1500 x 3340 mm Weight 2500 kg Electrical connection 3.5 kW Compressed air connection R 3/8" max 8 bar Availability: short term Location: Röllbach

Condition: good (used), Multi-purpose winch, cable winch, lifting winch, assembly winch, rope winch, universal rope winch -Manufacturer: Tirfor winch, multi-purpose winch type TU 32 with steel cable -Load capacity: 3200 kg Lajdpsw D Ai Aofx Apdjg -Steel cable: Ø 16.3 mm / Length 30 m -Number: 2x cable pull available -Price: per piece -Dimensions: 680/170/H340 mm -Total weight: 65 kg/set

Condition: good (used), Crane block, crane hook, load hook, single hook, bottom block Lsdpfxjw Tinco Apdeag -Crane hook: Crane hook load capacity 5 t -Rope groove: Ø up to 22 mm / see photos -Dimensions: 630/297/130 mm -Own weight: 32.6 kg

Condition: good (used), Crane block, crane hook, load hook, single hook, bottom block Laodew Tin Aopfx Apdeg -Crane block: Crane hook load capacity t -Rope groove: see photos -Dimensions: 420/170/90 mm -Own weight: 6.3 kg

Condition: new, functionality: fully functional, empty load weight: 902 kg, maximum load weight: 2,598 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 5,070 mm, loading space width: 2,100 mm, trailer brake: trailer braked, Year of construction: 2026, MARTZ GT Universal 500/3 S 3.5T NEW VEHICLE NEW SERIES Internal dimensions: 507cm x 210cm Total weight: 3500 kg Laedpfx Aoztb Rbspdjg Payload: 2598 kg Braked tri-axle trailer Overrun brake and parking brake by AL-KO 3 x 1350 kg axles and brakes with automatic reversing function Low chassis Fully welded, hot-dip galvanized steel frame Loading platform hydraulically tiltable 11-degree loading angle No ramps required Vertical loading ramp 15mm thick, robust and non-slip screen-printed wood floor Automatic jockey wheel with 400 kg support load Numerous lashing eyes along the entire length Reinforced 10" C tires with steel valve M+S tires 13-pin connector Side marker lights at the front Rear lights with reversing light and triangular reflectors Lights and license plate holder are foldable Rope winch with brake and bracket 2x wheel chocks OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100 km/h (shock absorbers) -Spare wheel with bracket -Complete LED lighting -Anti-theft device -Full aluminum floor made of aluminum panels -Anti-sway coupling -2 wheel stoppers for perforated steel strips -Wheel stopper across the entire width -Aluminum loading ramps -Aluminum side panels More accessories available on request! Plus freight to Gera and vehicle registration document €415 net Images are for illustrative purposes only and may show optional accessories that incur an additional charge. Haven't you found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pick-up. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. In addition, we have a large selection of spare parts and accessories, also for trailers from various manufacturers. With us, you will also find a wide range of rental trailers. Visit us online or come by directly.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-17, empty load weight: 665 kg, maximum load weight: 2,836 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,500 mm, loading space width: 1,820 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, Martz Bau-3 350/2 S 3.5T NEW VEHICLE Internal dimensions: 350cm x 182cm Side panel height: 30cm Loading platform height: 40cm Total weight: 3500kg Payload: 2836kg Braked tridem trailer Overrun brake and handbrake by AL-KO 2x 1850kg axles Low chassis Fully welded, hot-dip galvanized steel frame Fully supported floor 30cm steel side panels 15mm thick, non-slip, and robust screen-printed wood floor Automatic jockey wheel with 400kg support load 12 lashing points with 600kg tensile force, also on the front Reinforced 13" C-rated tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector Side marker lights at the front Rear lights with reversing light and triangular reflectors Vertical loading ramp incl. lifting aid (gas spring) Shovel holder Walkable steel fenders OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100 km/h (shock absorbers) -Spare wheel with holder -Anti-theft device -Net, fine or coarse mesh -Aluminum ramp Lsdpfx Apsztdrbjdeag Further accessories available on request! Plus freight to Gera and vehicle registration document €325 net Images are for illustrative purposes only and may show optional accessories at an additional cost. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and ready for immediate pick-up. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, including for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. You will find a wide selection of rental trailers with us. Visit us online or come directly!

Condition: excellent (used), Year of construction: 1982, machine/vehicle number: EM518, Technical specifications: 1 Vetter TYPE B Demag column-mounted slewing crane, capacity 2500 KG, with wire rope hoist Useful load at full outreach: 2500 KG / 2.5 tons Height: approx. 6.65 m Outreach of jib: approx. 5.2 m Outreach: approx. 11.5 m !!! Hook height: approx. 4.3 m Total weight: approx. 5000 kg Column diameter: approx. 100 cm! With steel wire rope hoist, capacity 2500 kg Slewing range: 360° Lodpfx Apozk Tngedjag Crane is dismantled and available immediately Item location: 75053 Gondelsheim Other cranes are available, with load capacities of 80-5000 kg, please inquire. See images. Shipping via freight forwarder or collection by appointment only.

Condition: used, Year of construction: 2003, Item No.: Lg 35626 Coil handling system KOHLER 30.400/9 - 2000.2H used Year of manufacture: 2003 Machine No.: 70330 Working direction: from left to right Loading side: rear Consisting of: Double unwinding reel 2000.2H Load capacity: max. 2,000 kg/side Coil width: 85 to 400 mm (when using a pressure arm) Spreading range: 360 – 420 mm Outer diameter: max. 1,800 mm Spreading: hydraulic/sliding wedge system + Automatic retension Drive: 2 x hydraulic motor + auxiliary drive for coil feeding and rewinding Braking: spring-loaded/disc brake Coil diameter-dependent control Lateral displacement: motorized Displacement distance: approx. 200 mm Base frame: frame construction Swiveling: motorized 180°, locking pneumatic, actuated wedge Counter bearing: manually attachable with quick-release fastener, open construction Coil loading: by means of rope or strap Spreading: The spreading is carried out hydraulically via a sliding wedge system. The reel is additionally equipped with an automatic retension system, so that the clamping pressure is maintained for several days. Counter bearing: The counter bearing is designed as a ring strut construction and can be attached manually. Two effective quick-release levers ensure a secure hold. The lightweight construction made of square tube profile in an open design has a total weight of approximately 15 kg with an outer diameter of 1600 mm. Automatic brake control/coil diameter dependent A diameter-dependent brake control is achieved via a proportional valve. During the acceleration and deceleration phase, the braking effect is automatically adjusted via a correspondingly controlled proportional pressure control valve. This control technology guarantees smooth coil unwinding. Base frame with motorized lateral displacement of the reel 2 x pressure roller, swiveling: The pressure roller is used to feed the coil into the straightening machine. It also prevents the coil from jumping when the coil strapping is released. The swiveling of the roller, which is coated with plastic, is carried out hydraulically. The contact pressure can be adjusted continuously. The drive of the roller is carried out via a hydraulic motor. Coil straightening machine 30.400/9 Passage width: max. 400 mm Number of straightening rollers: 9 pcs. Straightening roller diameter: 30 mm Straightening roller material thickness: 0.4 – 3.0 mm Roller stand adjustment: motorized (2-point) The complete straightening roller bearing is mounted on a slide plate at the top and bottom and can be manually moved in and out. Measuring device: digital Measuring display: metric Setting accuracy: 0.01 mm Straightening roller bearing: needle bearing Lasdpfxezpbaze Apdog Bearing sealing: shaft seals Straightening roller hardness: HRc 60 Straightening roller surface roughness: 0.001 mm and better Straightening roller drive: individual drive Gearbox: distribution gearbox Lubrication: grease lubrication of the straightening roller bearing Oil circulation lubrication of the cardan shafts Drive: three-phase motor with frequency control Speed: 0 - 40 m/min Number of coil feed rollers: 2 Coil feed roller diameter: 120 mm Coil feed roller adjustment: pneumatic Drive coil feed: both rollers from the straightening machine gearbox Surface coil feed rollers: like straightening rollers

Condition: used, mileage: 3,26,000 km, power: 132 kW (179.47 HP), first registration: 02/2013, fuel type: diesel, maximum load weight: 7,100 kg, overall weight: 12,000 kg, tire size: 265/70r17.5, axle configuration: 4x2, wheelbase: 3,690 mm, next inspection (TÜV): 06/2023, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, loading space length: 3,900 mm, loading space width: 2,400 mm, loading space height: 600 mm, Year of construction: 2013, Equipment: ABS, air conditioning, car registration, hydraulics, IVECO EUROCARGO ML120EL18 CUBE - Chassis ZCFA1ED04D2607352 YearEURO 5 Mechanics: 4 cylinder common rail Tector - 3920 cc - 180 hp - km 326,769 Manual transmission ZF 6 speed + rm Bodywork: exterior cab color white \ interior cab color white Tires: dim. 265/70r17.5 STRUCTURE: 3690 mm wheelbase - Short cab - Mechanical front and rear suspension. Total weight on the ground: 119.90 - Useful D. 70.90 TECHNICAL TRUCK EQUIPMENT: Lowered El Version, Air Conditioner, Euro 5, Manual Transmission 6 Speed + Rm - Zf 6s 700 To, Abs, Brake Engine With Retarder Function, Cruise Control, Power Steering, Immobilizer, Clutch Servo, Limiter Electronic Speed Limiter, Pneumatic Driver's Seat, Electric Windshield Lift, Electric And Heated Mirrors, Fog lamps. Heated, Fog Lights EQUIPMENT: THREE-SIDE TIPPER Outer Dim. Width 246 cm * Length 410 cm* H 60 cm FE 52 sheet metal platform, Front cab guard with safety net, H 600 alloy side rails in TRS, Tailboard rear with flag opening, No. 2 PVC fenders, No. 1 PVC toolbox, guards side, No. 4 winches with rope tensioning hooks, removable rear stand. Documents: Nationalized - Certificate of Approval Lsdpfx Aon Amt Eopdsag For viewing and road test, contact Valerio Roscini at.

Condition: used, SPECIAL OFFER!! Discounts of over 20%! The new standard DEMAG hoists are available at attractive prices from Jan Reiling B.V. during this period. Lasdpfx Apsf Ar Rnodeg This applies to the 125KG, 250KG, 500KG, 1,000KG & 2,000KG models. Optionally complete with manual or electric trolley. (price on request) Lifting capacity (kg) 125 FEM 2m Lifting height (m) 4 Type DC-Com 1-125 H4 V1 Lifting speed (m/min) 8-2 Price fixed suspension on request Lifting capacity (kg) 250 FEM 1Am Lifting height (m) 4 Type DC-Com 2-250 H4 V1 Lifting speed (m/min) 6-1.5 Price fixed suspension on request Lifting capacity (kg) 500 FEM 1Am Lifting height (m) 4 Type DC-Com 5-500 H4 V1 Lifting speed (m/min) 4.5-1.1 Price fixed suspension on request Lifting capacity (kg) 1000 FEM 1Am Lifting height (m) 4 Type DC-Com 10-1000 H4 V1 Lifting speed (m/min) 4-1 Price fixed suspension on request Lifting capacity (kg) 2000 FEM 1Am Lifting height (m) 4 Type DC-Com 20-2000 H4 V1 Lifting speed (m/min) 4-1 Price fixed suspension on request Optionally equipped with radio remote control (lifting and trolley movement) Can be ordered on the Jan Reiling B.V. website. With the DC-com special, you get a lot of DEMAG for little money. This hoist is standardly equipped with: - Hook travel of 4 meters - High-quality powder coating for better protection and longer service life - Slip clutch between the lifting motor and the brake (no load pockets) - Low-voltage control - Push-button switch easily adjustable in height - Gearbox, clutch and brake maintenance-free for up to 10 years - Hour meter - Plug & Lift - Minimal installation dimensions - Very easy to maintain - Limit switch for highest and lowest position Don’t compare apples with oranges and choose quality, choose DEMAG. We also offer DEMAG parts, cranes, wire rope hoists and lifting equipment. For more information: For assembly, inspection and maintenance of your DEMAG hoists or cranes, you have come to the right place.

Condition: new, empty load weight: 650 kg, maximum load weight: 2,050 kg, overall weight: 2,700 kg, loading space length: 4,600 mm, loading space width: 1,940 mm, tire size: 195/55r10c, This tilting car trailer, designed as a platform trailer, makes loading cars easy. The trailer’s loading platform is tilted using a manual hydraulic system, providing a firm and secure base. The license plate holder is folded down, and the lights are moved to the side, eliminating the need to handle heavy ramps. After a car has been loaded, the loading platform is lowered again by opening the hydraulic valve. This car transporter impresses not only with its appearance but also with its high-quality construction, stability, and ease of use. The extensive features of the car transport trailer make the offer even more attractive. As standard, the car trailer includes a manual hydraulic system, two hydraulic supports for a stable platform, an aluminum floor, a rope winch with a holder that is adjustable in width, wheel stops, lashing eyes, a spare wheel with a holder under the loading platform, an automatic support wheel, a very stable welded frame, and a V-shaped drawbar, all hot-dip galvanized. Technical details can be found below. We also offer accessories for the car trailer, such as a tarpaulin and frame, car lashing straps, lashing straps, shock absorbers, TÜV certification for 100 km/h, toolboxes, and anti-theft devices. ----- Ledpfx Aofidl Sopdeag You can find all our cost-effective offers on our website. Delivery is possible throughout Germany (except for islands)! Please feel free to ask us about the prices. ----- PKW-Anhänger-Center Ahrens, Moordeicher Landstraße 37, 28816 Stuhr near Bremen, Tel: 0, Fax: Collection times: Monday - Friday – Uhr Collection is not possible on Saturdays!

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,480 mm, loading space height: 2,165 mm, loading space volume: 56 m³, Equipment: ABS, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width: 1,600 mm Axles and suspension: Disc brake 430 mm Jost (formerly Mercedes DCA) axle units, 3 x 9 tons, with air suspension, air springs arranged centrally to the chassis longitudinal beam. First axle can be lifted with starting assist and manual forced lowering. Smart Board information center, lift/lower valve, BVA brake wear indicator. Tires and wheels: 6 wheels with tires size 385/65 R22.5, from various manufacturers (manufacturer's choice), with steel rims 11.75 x 22.5 ET 120. Fifth wheel: Mechanical version with single-sided operation in 2 speeds with pivoting base for air suspension. Braking system: According to E.G. standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS incl. RSS (Roll Stability System) and Premium modulator, Wabco Smartboard information center, aluminum air tank system. Electrical system: Lasdpfxsfi Nmuo Apdsg According to STVZO guidelines, with 2 five-chamber lights, type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x5-pole sockets, with side marker lights, 2 separate LED rear lights, 1 LED interior light. Tipping body/dump bed: Internally fully welded. Aluminum dump bed, side walls with 30 mm thick plank profiles (2-3 mm) welded together, 600 mm wide. Floor made of 8 mm thick, highly wear-resistant alloy (5383H34/HB 110). Front wall reinforced, 4 mm thick, in a straight design. Rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 configuration, with a grain slide, or alternatively in a 1/2-1/2 configuration with a grain slide on each side. Aluminum round profile welded on the side and bottom for sealing the door gap on the rear doors. Rear doors partially covered with smooth aluminum. Operation of the universal door automatically pneumatic with separate lever that can be locked. Rear supports made of aluminum, can be swung out. Two retaining straps with rubber buffers on the tipping body, attached to the frame at the front wall. Hydraulic system: Tipping cylinder with large cylinder body Hydraulic cylinder mounted on the front wall with a max. working pressure of 150 bar, manufacturer Edbro, with approx. 2.5 m hydraulic hose and quick-release coupling 1", tipping angle approx. 48 degrees. Accessories: 6 Parlok fenders, complete mud flaps covering the entire vehicle width attached to the U-profile. Aluminum spare wheel holder. Folding side impact protection on the right side. Large tool box, type 860. Approx. 3 m aluminum ladder. 3 aluminum swing supports mounted centrally, approx. 150 mm higher. Additional centrally mounted support receiver for positioning a total of 2 supports to increase the loading width. Tarpaulin with a central light strip and separate reinforcements in the wear areas, approx. 660 gr./m2 quality, with tarpaulin system. Circumferential rubber rope in the rear end of the tarpaulin to be attached to two tension hooks on the rear swing support. Walkway on the frame in chassis color. Tarpaulin closure with quick-release fastener. Tarpaulin end at the rear with welded-in rubber rope to prevent water ingress. Robust folding underrun protection with two towing eyes left and right incl. locking pin. 2 "Clear-Pass" mud flaps on the fender according to EG standard, attached to the frame on the side. Aluminum grain chute with tarpaulin bag attached to the frame on the side. Holder for s

Condition: used, Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 8 mm -Length: 75.4 m -for: electric wire rope hoist -Also other crane ropes: available -Price: per piece Ljdpfed Sva Ijx Apdeag -Number: 2 pieces -Weight: 19 kg/piece

Condition: good (used), hydraulic rope hoist, hoist, grab hoist, hydraulic cylinder for rope Ledjffm D Njpfx Apdoag -hydraulically operated: cable pull -Max. Pulling force: 12 t -each: 1 pull cylinder with accessories -Number: 2 pieces -Price: per piece -Dimension: Ø 115 x 685 mm -Weight: 28 kg/piece