Used Rotary Compressor for sale (6,808)

Condition: used, Piston Compressor KAESER Type EPC 630-250 Serial No.: 1802334 Year of manufacture: 1992 Free air delivery at 6 bar: 440 liters/min. Maximum intake capacity: 630 liters/min. Bledpfjwypqrjx Agkod Output pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Connection: 400 Volt, 50 Hz (with 16 Amp plug) - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar - Run time from 0 bar to switch-off pressure of 10 bar = 5 min Space required (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg In good condition

Condition: used, Screw compressor KAESER type BS 50 Serial no.: 402852 Year of manufacture: 1990 Volume flow: 5 m³/min. Operating pressure: 7.5 bar Main motor power: 30 kW Electrical connection: 400 Volt, 50 Hz Connection thread: 1 1/2" inch - 1107.90 hours of operation read - 749.00 load hours read Bodpfx Agoiyu Ifjksld - Sound-insulated Dimensions (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Very good condition Was a reserve compressor and has only few operating hours.

Condition: used, Filter fitting, filter unit COMPAIR for compressor units Compressed air filter Type: CF 0087B ZP Factory No.: 3363006 / 05 / 005 Operating pressure: max. 16 bar Thread connection: G 1 1/2" Flow rate: approx. 8,5 m³/min Filter element- No: CE 0087B - Filter housing made of aluminum weight: 5 kg dimension L x W x H 125 x 110 x 420 mm good condition Bodpfx Ajhalvdjgkold

Condition: used, Vacuum pump, vane pump, rotary vane pump ALCATEL type 100-132 No. 173082 - 3101 Year of construction: approx. 1995 Volume flow: approx. 50 m3/h Vacuum: 0.5 mbar (specification on the nameplate) Negative pressure: - 0.9 bar (determined during test run) Engine power: 3 kW Bjdpfx Asd A Srgogkjld Engine speed: 1420 rpm. mains connection: 400 Volt, 50 Hz - Oil lubricated rotary vane pump Dimensions L x W x H: 700 x 420 x 310 mm Weight: 78 kg sound condition

Condition: used, Welding turntable – Welding positioner with enclosure Circular welding device Load capacity approx. 50 kg Chuck diameter 300 mm Chuck rotational speed 1.0–15 rpm Power supply 230 Volts, 50 Hz - Spiral scroll chuck with internally stepped jaws Bjdpfx Ajdzp U Iegkeld - Infinitely variable speed adjustment via potentiometer - Drive via geared motor, rotation direction left - Start via electrical switch - Welding current transmission via slip ring contact - Extraction connection Ø 160 mm - Internal lighting Door opening W x H 715 x 1060 mm Internal dimensions W x D x H 780 x 780 x 1100 mm Required space W x D x H 900 x 900 x 2300 mm Weight 190 kg

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 Blodsr I E Itjpfx Agked - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: used, Univ. swivel-tilt-rotary table Add-on table for Univ. tool milling machine Bsdsgp T D Nopfx Agkold table size 630 x 250 mm Groove width 14 mm Rotatable and tiltable +/- 30 Swiveling +/-45 - 4x T-slot Weight approx. 120 kg

Condition: used, Year of construction: 1997, operating hours: 2,111 h, Field of application: Construction Drive: Wheel Empty weight: 880 kg Bsdpfx Aeymi T Esgkeld Make of engine: Deutz Serial number: X0325104 Transport dimensions (LxWxH): 1.95x1.4x1.3 Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2011, operating hours: 53,400 h, functionality: fully functional, power: 22 kW (29.91 HP), volume flow: 2.94 m³/h, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, Serial nr. 1170 Bsdjym Axzjpfx Agkjld Maintenance carried out by Kaeser

Year of construction: 2012, condition: excellent (used), functionality: fully functional, machine/vehicle number: 9349-0010, Used: rotary hearth furnace / mandrel hardening press Bsdpfx Ajw Rrxfsgksld Manufacturer: Aichelin Model: Drehherdofen Aichelin RDGs 270 Control: Siemens S7-300/317-2 PN/DP Year of manufacture: 2012 Max. temperature: 950 °C GAS

Condition: good (used), 700 USED WP Unitherm trolley oven. The oven with a gas/oil burner. EXTERNAL DIMENSIONS (in cm.): Blsdpfx Aeq R Ug Dogked - W:135, - L: 210, - H: 290. The USED device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, UKRAINIAN.

Condition: excellent (used), Year of construction: 2015, operating hours: 22,905 h, functionality: fully functional, machine/vehicle number: API173336, overall weight: 1,500 kg, power: 90 kW (122.37 HP), volume flow: 15.78 m³/h, operating pressure: 10 bar, pressure (min.): 8 bar, pressure (max.): 10 bar, type of cooling: air, Equipment: refrigerant dryer, We are selling a CECCATO DRE 120 compressor station (90 kW, 10 bar), including accessories: raw compressed air filter (M022FWF), fine compressed air filter (MO22SWF), MO22AWM carbon filter, RA 1080 compressed air condensation dryer. At the moment 22905 WORKING HOURS . Regularly serviced compresor from 2015. Dryer and filters new in 2022. We are seling for 20 000 EUR Loadet, EXELLENT CONDITION LOCATION CZECH REPUBLIC , 78701 SUMPERK Blodpjynubdefx Agkjd

Condition: like new (used), Year of construction: 2011, functionality: fully functional, Kaeser SM 9 Screw Compressor Manufacturer: Kaeser Model: SM 9 Year of manufacture: 2011 Max. operating overpressure: 11.0 bar Rated power: 5.5 kW Refrigeration dryer TA 11 included Bodoylwkvopfx Agksld Year of manufacture: 2011

Condition: excellent (used), Year of construction: 2017, operating hours: 26,862 h, functionality: fully functional, Atlas Copco GA75VSD screw compressor. Integrated frequency inverter. 75 kW with 13 bar and 15.09 m3/min. Equipped with heat recovery system (WRG). Bodpfx Ajyllp Hjgkeld

Condition: excellent (used), functionality: fully functional, load capacity: 4,000 kg, Severt manual column lift and rotation device, including matching perforated table 1500 x 1500 x 200 mm for bolting, included. Optionally available with tooling for perforated table accessory set. Excellent condition (see video). Hydraulically height adjustable, minimum 800 mm, maximum 2400 mm. Load capacity 4000 kg. Perforated table 1500 x 1500 x 200 mm, type 28 mm. Bodpfsyli Uysx Agkold

Condition: like new (used), Year of construction: 2025, functionality: fully functional, overall weight: 443 kg, total length: 2,000 mm, total width: 750 mm, total height: 1,670 mm, space requirement length: 2,000 mm, space requirement width: 750 mm, space requirement height: 1,670 mm, power: 15 kW (20.39 HP), volume flow: 126 m³/h, pressure (max.): 10 bar, noise level: 68 dB, Equipment: documentation/manual, refrigerant dryer, For sale is a high-performance Inaircom PSC-M15-10-500 screw compressor with integrated frequency inverter, refrigerated dryer, and a 500-liter pressure vessel. Ideal for workshops, manufacturing operations, or industrial applications. Technical Data - Power: 15 kW - Voltage: 400 V - Maximum pressure: 10 bar - Tank volume: 500 l Bodpfsynv Ursx Agkeld - Free air delivery: 840 – 2100 l/min - Connection: 3/4" - Noise level: 68 dB - Dimensions (W×D×H): 2000 × 750 × 1670 mm - Weight: 443 kg Condition & Features - Fully functional - Includes refrigerated dryer for dry, clean compressed air - Equipped with frequency inverter for energy-efficient operation - Robust industrial design We are offering this as-new Inaircom PSC-M15-10-500 screw compressor, year of manufacture 2025. If you have any questions or need further information, feel free to send us a message or call us.

Year of construction: 1960, condition: used, R.A.S. rotary mandrel press Type 200-20 machine no. 117/6 Blodpfx Aeic Rn Uogked stroke 200 mm pressure force 20 t spindle diameter 60 mm

Condition: used, Year of construction: 2010, Lot consists of: (1) Compressor Bodpfsym Tx Sox Agkjld Technical Details: Motor: 5,500V 108A 900kW, weight 4.6 t /// Compressor: 7,500 m³/h, 6 bar. LxWxH 4.5x3.3x2.2 m, weight 12.5 t

Condition: used, Year of construction: 2010, Lot consists of: (1) Compressor Bljdpfx Aeym Txxsgksd Technical Details: max. 8.6 bar, Input 702 kW / 1,700 rpm

Condition: used, Year of construction: 2002, Max. working pressure: 7.7 bar, volume approx. 280 m³/min, input power 824 kW /// Drive motor: model AMA 400S2L BSH, 1,000 kW / 5,500 V / 121 A / 50 Hz / 2,969 rpm, weight approx. 3.5 tons /// Centrifugal compressor: model ZH 10,000-5-7, max. input 1,737 HP, input 2,969 rpm, max. output 12 bar Bedpfxoym Twnj Agkeld

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Bodou Tln Nopfx Agkeld Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: good (used), Year of construction: 2020, Rotary lobe compressor, rotary lobe blower, rotary piston pump, Roots pump, compressor, vacuum pump, pressure blower, pressure compressor -Manufacturer: Shandong Huadong Blower Co., Ltd. -Brand: XinHuadong -Model: HDSR2608 Bledpfxjylzguo Agkod -Pressure increase: 90 kPa -Main shaft speed: 1150 rpm -Blower No.: 20062006621 -Engine power: 90KW -Flow rate: 41 m³/min -Date of manufacture: June 22, 2020 -Production number: 2006-128 -Dimensions: 1170/1820/H1460 mm -Weight: 1440 kg

Condition: like new (used), functionality: fully functional, overall weight: 205 kg, fuel type: gasoline, color: yellow, operation weight: 205 kg, maximum load weight: 205 kg, empty load weight: 205 kg, Year of construction: 2015, operating hours: 309 h, machine/vehicle number: WKA0N0000F5372053, Kaeser M17 Construction Site Compressor Air delivery: 1.0 m³/min Working pressure: 15 bar Honda GX 630 petrol engine Technical data: Manufacturer: Kaeser Model: Mobilair M17 Working pressure: max. 15 bar Output: 1.0 m³/min Engine: Honda GX 630 petrol engine Engine power: 15.5 kW Tank capacity: 20 litres petrol Compressed air outlet: 1 x G 1/2 Operating weight: 205 kg Transport chassis: with carrying handles Equipment: compressed air aftercooler Starter system: electric start (battery not included) Features & equipment: - Compact high-pressure compressor for a wide range of construction site applications - Powerful & reliable Honda petrol engine - Working pressure of 15 bar – ideal for specialist applications - Aftercooler & condensate separator – for dry compressed air Bodpfoym Udiex Agkeld - Transport chassis with handles – easy to manoeuvre - G 1/2 outlet – compatible with major compressed air systems Applications: ✓ Operation of high-pressure pneumatic tools ✓ Roadworks & earthmoving ✓ Fibre optic cable installation ✓ Construction companies, gardening & municipal services ✓ Infrastructure & refurbishment projects

Condition: excellent (used), Year of construction: 2015, operating hours: 51,498 h, functionality: fully functional, Atlas Copco GA18VSD+ screw compressor, 18.5 kW, 13 bar, 3.57 m3/min, with integrated frequency converter. Bedpfx Ajyk Rxkogksld

Condition: ready for operation (used), Year of construction: 1990, Miller-Johannisberg 660 Specification Detail Process Heatset web offset printing Web Width 660 mm Cut-off 452 mm Colors/Units Typically configured with 5 printing units (works 4+4) Dryer VITS gas dryer Folder Capable of folding up to A5 size Bjdpjyk Eg Nofx Agkeld Controls Includes a control panel with register control Tension control system Baldwin dampening Chiller unit, plus chilling system before folder