Used Rotary Transfer Machine for sale (86,230)

Condition: used, overall weight: 4,95,000 kg, Year of construction: 1991, Complete Mechanical Upgrade by GFM, with increase of Power to 900 Ton/hammer and new CNC in 1991 Numbers ̈of Hammers: 4 Forging force: 3.600 Ton (900t per hammer) Ksdpfxev D Ddvo Aansnf Maximum diameter of forging: - circular cross section: Ø 400 mm - square cross section: 320 mm Minimum output diameter: - circular: 60 mm - square: approx 50 mm Maximum length of forging with/without lateral reception: 8.000 mm / 9.700 mm Workpìece weight: 2500 kg Min length: 1500 mm Max length: 3000 mm Engine forge: 2 x 500 kW, 5500 V, 50 Hz Total power supply (nominal power): ca 1.600 kW Machine weight: 493.000 kg

Condition: excellent (used), For sale rotary table for boring machine Table 2000mmx2000mm Table weight 20000kg Knodpfx Asui Nt Noanof Max table load 40000kg Travel 2000mm Control Table condition perfect

Condition: good (used), Machine has been filling jams, honey, sweet mincemeat into plastic catering size tubs. Was then feeding into two separate lidding lines which can be available separately. Knedpjrdzbtsfx Aanjf

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: HB32-571, Equipment: chip conveyor, documentation/manual, TECHNICAL DETAILS Number of CNC units: 8 Control system: Siemens Chip conveyor: Knoll Filter system: Vacuum rotation filter High pressure system: Combiloop Loading magazine: 3 m UNIT LAYOUT PLAN Station 1: Sawing Station 2: Drilling hydraulics Station 3 H: CNC turning Station 3 V: Drilling hydraulics Station 4: CNC turning Station 5: CNC turning Ksdpfowkd A Dox Aansnf Station 6 H: Drilling hydraulics Station 6 V: CNC turning Station 7: No unit Station 8: CNC turning Station 9: CNC turning Station 10: Drilling hydraulics Station 11: Drilling hydraulics Station 12: CNC turning Station 13: CNC turning Station 14: Milling Station 15: Drilling hydraulics Station 16: Drilling hydraulics EQUIPMENT - Pedestal - Declaration of conformity

Condition: excellent (used), Year of construction: 1996, NEW ARRIVAL +++++ 1 used, very well-maintained MIKRON MULTISTAR CX 24 transfer machine / rotary transfer machine Machine can be inspected under power. Part setup is no problem. With MITSUBISHI AACPU-S1 control system - Machine Year of manufacture 1996 - Knsdst I T N Eopfx Aanjf Detailed technical data as per appendix - Machine can be inspected under power. Conversion - INSTALLATION - Setup - Application can be offered. Pricing: ex-site, unpacked, uninsured. Delivery time: immediately - subject to prior sale. Technical data is non-binding - errors excepted. Payment: As is customary for used machines, net before removal.

Year of construction: 2009, condition: good (used), GRUNWALD HITTPAC AKH-059/2 Item: GRUNWALD Hittpac AKH-059/2 Grunwald-Cup Filling Machine diverse, margarine, sous, butter, cheese etc.. Grunwald Rotary cup filling machine with 2 heads, for round cups Kodsl D T D Tepfx Aansnf Year of production: 2009 For hot fill of liquid products including cup lifting device servo driven and hopper with scraper agitator and feed valves (CIP cleanable), aluminum seal dispensing by vacuum and tip sealing, heat sealing of aluminum seal, snap-on cover station and out feed. Stainless steel control panel, hanging on the machine with servo controller (make: Elau) and touchscreen operator panel. Machine has polycarbonate glass safety guards. Documentation (instruction, parts manual and electric scheme) in German available CEE machine, incl. complete documentation

Condition: new, Year of construction: 2025, Premade pouches packaging/filling and closing machine, rotary operation with 8 working positions. Suitable for flat pouces and doypack style pouches with/without zipper or spout. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed, especially for zipper or spout bags. Sucking unit to open all kind of bags with thinner film material. Suitable for the following bag dimensions: L(200-450)xW200-300)mm. - Technical specifications: max. speed of the machine in neutral: 30 cycles/minute; power: 380V, 4.0kW; compressed air: 0.6m³, 6bar; machine dimensions: L2500xW1800xH1800mm; weight: 1400kg. Kjdpfxov Nlmvo Aanjnf That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2024, This CNC router is designed to deal with furnishing and 3D milling of any shape or form you want. It has a rotary device that allows you to make balusters, stair posts, and other structures. Wattsan CNC milling machine for medium or big production is simple to operate and will provide reliable results. Wattsan M1 1325 planetary gears allow you to cut hardwoods and soft metals easily. It’s perfect for the furniture industry. With a Wattsan milling machine, you may work with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Wattsan M1 1325 RD machine characteristics: Working area: 1300x2500 mm Spindle: 4.5 kW Machine size: 2700x 3380x1780mm Weight: 1350 kg Knsdpsr D Nmksfx Aanef Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: ready for operation (used), Drilling capacity (steel): 100mm, max. pitch circle diameter: 7000mm, spindles: 2, spindle speed: 3000rpm, spindle mount: ISO 50, drill carriage stroke: 900mm, feed: 6m/min, power: 125kW. Machine dimensions X/Y/Z: approx. 13000mm/11000mm/5100mm, weight: approx. 18000kg. On-site inspection is possible. Knodpevriq Refx Aansf

Year of construction: 2002, condition: used, Balpe SAS Kodpfob Uanqox Aansnf model: 9PL/20 serial: 88 Stainless, 9 electrically heated angled plate with, 200mm diameter, adjustable temperature.

Condition: used, TECHNICAL DETAILS - Posts number : 12 - Table indexing : 12 x 30 [°] - Collet type : SCHAUBLIN W25 - Max. clamping diameter : 25 [mm] - Max. part length : 100 [mm] - Supply voltage : 3x 400 [V] Knodpfx Aaouhbwconjf - Installed power : 32 [kW] - Machine dimensions : 2700 x 2700 x 2500 [mm] - Weight : 4000 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT 5.07.018-4, capacity 4200 mm - Post 1, bucking - Post 2, longitudinal drilling 30/60 - Post 3, longitudinal drilling 30/60 - Post 4, CNC turning 2 axes - Post 5, turnaround - Post 6, radial drilling 30/60 - Post 7, CNC turning 2 axes - Post 8, inclined drilling 30/60 - Post 9, radial drilling 30/60 - Post 10, inclined drilling 20/50 - Post 11, radial drilling 20/50 - Post 12, longitudinal drilling 30/60 - Ejection between the posts 12 and 1 - Part band conveyor - Chip conveyor KNOLL 450 K-1/2000 - Lubrication tank KNOLL KTS-25-60-T - Pump HP : 40 [bar] - Filtration KNOLL VRF 500

Condition: new, Year of construction: 2025, Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. Suitable for premade doypacks with a corner spout or a spout on top. The rotary machine has filling units equipped with two filling heads each for liquid filling and two heads each for positioning and closing the spout lids. Additional equipment: feeding lift for the spout caps, external module for CIP cleaning, air cleaning system for inner area of the machine. Relevant electronic components from Schneider and Omron, PLC and touch screen from SIEMENS, pneumatic components from AIRTAC. - Specifications: Filling range: max. 3000ml; number of filling heads: 6; max. number of machine cycles in neutral: 26 cycles/min; current: 220/380V, 2.5kW; air pressure and consumption: 5-7bar, 0.7m³; machine dimensions LxWxH: 2600x1630x1900mm; weight: 1600kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Kjdpfxsv Nlngo Aansnf

Condition: ready for operation (used), Year of construction: 2019, Product: round 2kg bucket for mozzarella with handle and snap-on lid, throughput: 1600-1800 buckets/h, bucket dimensions: 175x131mm, connected load: 7kW, compressed air connection: 6bar, length: 2060mm, width: 2060mm, height: 3200mm, weight: approx. 4t. Double-lane, includes cup setter, cup control, free space for the installation of a multi-head weigher, rag dosing, CIP design, inverted lid station, push-on station, lifting/pushing-off, discharge conveyor, process control, central lubrication, drainage channels and other elements. On-site inspection is possible, the machine is already dismantled and ready for loading, with documentation. The machine did not run much. Knsdswbpyvspfx Aanof

Condition: used, TECHNICAL DETAILS - Number of axes : 48 - Number of posts : 16 - Number of units : - Number of possible horizontal units : 16 - Number of possible vertical units : 7 - Max. diameter : 45 [mm] - Max. part width : 150 [mm] - Basis unit GM50/150 : * Stroke Z : 150 [mm] * Spindle power : 5 [kW] * Spindle speed : 0 - 8000 [Rpm] - Slide X/Y : * Strokes X : +/- 40 [mm] Knedpfx Aou N Ivqjanof * Strokes Y : +/- 20 [mm] - Dimensions : 14000 x 4800 x 3000 [mm] - Weight : 13 [t] - Number of hours : 4283 [h] EQUIPMENT - Control CNC Bosch Rexroth INDRAMOTION MTX-L85 - Post 1 : * sawing unit 52/100 3 axes - Post 2 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 3 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 4 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 5 : * slide CNC 50/150 ref 22.10.001-4 (2 axes) * unit CNC 50/150 ref 22.42.001-6 (with CNC turning function) * coolant through spindle - Post 6 : * slide CNC 50/150 ref 22.10.001-4 (2 axes) * unit CNC 50/150 ref 22.42.001-6 (with CNC turning function) * coolant through spindle - Post 7 : * slide 50/150 manual adjustment ref 22.10.002.1 * unit recessing ref 22.42.041.1 - Post 8 : * slide CNC 50/150 ref 22.10.001.4 (2001) * unit CNC 50/150 ref 22.42.001.6 (with CNC turning function) - Post 9 : * slide CNC 50/150 ref 22.10.001.4 * recessing unit ref 22.42.039.2 - Post 10 : * slide 50/150 manual adjustment ref 22.10.002.1 * recessing unit ref 22.42.039.8 - Post 11 : * slide CNC 50/150 ref 22.10.001.4 * unit 50/150 ref 22.42.001.6 (CNC turning function) - Post 12 : * slide 50/150 ref 22.10.002.1 * recessing unit ref 22.42.041.1 - Post 13 : * slide CNC 50/150 ref 22.10.001.4 * recessing unit ref 22.42.041.1 - Post 14 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) - Post 15 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) * coolant through spindle - Post 16 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) * coolant through spindle - Bar feeder length 4 m - Coolant tank KNOLL (2000 Liters) with HP pump 60 [bars] - Chips conveyor

Condition: new, Year of construction: 2025, Premade pouches packaging/filling and closing machine, rotary operation with 6 working positions. Suitable for flat pouches and doypack style pouches. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed. Sucking unit to open all kind of bags with thinner film material. Suitable for the following bag dimensions: L(100-350)xW(100-210)mm. - Technical specifications: max. speed of the machine in neutral: 45 cycles/minute; power: 380V, 2.5kW; compressed air: 0.6m³, 6bar; machine dimensions: L2214xW1850xH1640mm; weight: 1000kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Knodpjv Nlmcjfx Aanof

Condition: ready for operation (used), Year of construction: 2019, Complete cup filling and sealing machine (year of manufacture 2019) with inkjet encoding, conveyor belt extension and dosing bar (incl. perlator inserts, year of manufacture 2020) used in the cheese industry. Filling temperature: Cold filling, round plastic bucket/plastic bucket/plastic bucket 2: Diameter 175mm x height 131mm/diameter 104mm x height 55mm or 65mm/diameter 227mm x height 194mm. Dimensions X/Y/Z and weight, without outfeed conveyor belt and shifting shank: 2200mm/2200mm/3200mm and approx. 3500kg. Knjder Dd H Sspfx Aanef

Condition: used, TECHNICAL DETAILS - Posts number : 16 - Indexing time : 0,7 [s] - Max. bar diameter : 32 [mm] - Clamping type : collet VB 32 - Max. part length : 150 [mm] - Max. number of horizontal units : 16 - Max. number of vertical units : 24 - Max. number of all units : 24 - Electrical supply : 400 [V] - Installed power : 40 [kW] - Dimensions : 9,8 x 4 x 2,9 [m] - Weight : 6 500 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT Kedpeuhbwisfx Aanjnf - 2 turning units CNC 2 axes - Band part conveyor - Chip conveyor - Lubricating tank - Filtration

Year of construction: 2025, condition: new, Vertical packaging machine, high speed machine with continuous rotary sealing jaws motion, suitable for pillow bags, MITSUBISHI PLC, WEINVIEW touch screen operator interface, automatic program set-up, mark sensor registration control, quick change former assembly, servo motor sealing unit, servo motor film pulling, double pulling possible. - Specifications: bag size: L(80-500)xW(70-265)mm (single pulling); film width: 170-560mm; max. speed of the machine in neutral: 180 cycles/minute; stainless steel; 380V/7.5kW; 6bar, 0.25m³/min; machine dimensions: L1500xW1200xH1620mm; weight: 700 kg. Kodjv Nmykspfx Aanjnf Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), A Baader Lino poultry buffer system is available. Knsdot Nhmuepfx Aanof

Condition: used, TECHNICAL DETAILS - Number of axes : 27 - Number of posts : 12 - Number of machining stations : 9 - Indexing time : 2 [sec] MACHINING UNIT - Designation : UV151-3 - Number of units : 1 - Travels on X/Y/Z axes : 110 / 150 / 135 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] MACHINING UNIT - Designation : UV50-3 - Number of units : 8 - Travels on X/Y/Z axes : 40 / 120 / 100 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] SPINDLES - Spindle type : Electrospindle Ø38 * Number of spindles : 14 * Tool holder type : ISO10 * Spindle speeds : 18.000 [rpm] * Spindle power : 0.25 [kW] - Spindle type : Electrospindle Ø38 * Number of spindles : 4 * Tool holder type : ISO10 * Spindle speeds : 9.000 [rpm] * Spindle power : 0.25 [kW] - Spindle type : Electrospindle Ø120 * Number of spindles : 1 * Tool holder type : HSK40 * Spindle speeds : 8.710 [rpm] * Spindle power : 3.8 [kW] - Spindle type : Electrospindle with gear reducer Ø38 * Number of spindles : 2 * Tool holder type : ISO10 * Spindle speeds : 9.000 [rpm] * Spindle power : 0.25 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 10 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4600 x 3600 [mm] - Machine height : 3200 [mm] - Machine weight : 13500 [kg] EQUIPMENT - CNC : Siemens - Cooling unit - Coolant tank * with high-pressure pump - Chips conveyor Kjdsv Rgy Hopfx Aanenf - Oil mist extractor : ELBARON RON/A 120

Year of construction: 2025, condition: new, Premade pouches packaging/filling and closing machine, rotary operation with 6 working positions. Suitable for flat pouches and doypack style pouches. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed. Sucking unit to open all kind of bags with thinner film material. Suitable for the following bag dimensions: L(200-450)xW(200-300)mm. - Technical specifications: max. speed of the machine in neutral: 30 cycles/minute; power: 380V, 3.5kW; compressed air: 0.6m³, 6bar; machine dimensions: L2500xW1800xH1800mm; weight: 1200kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Knsdpsv Nlmiefx Aanof Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. The rotary machine is especially used for filling all kinds of liquids such as water, juices, sauces such as soy sauce, salad dressings, tomato sauce or liquids with high viscosity such as barbecue sauces/BBQ sauces, honey, up to pasty products such as peanut butter, fruit jam, nut nougat cream etc. The filling and capping machine is equipped with six filling heads for liquid filling and with six heads each for positioning and capping the spout lids. The production process is fully automated from bag feeding, filling, cleaning of the nozzles, feeding the spout lids via lift and capping them, to the output of the final products. To ensure the exact filling volume, the liquid level is constantly monitored. PLC control, touch screen operating monitor (menu available in different languages e.g. English, German etc.). Suitable for premade doypacks with a corner spout or a spout on top. - Specifications: Filling range: max. 150ml (can be customized); number of filling heads: 6; max. number of machine cycles in neutral: 18 cycles/min (corresponds to max. 108 bags/min); current: 220/380V, 3P, 1.5kW; air pressure and consumption: 5-7bar, 0.65m³; liquid contact parts are made of AISI 316 stainless steel, non-contact parts are made of AISI 304 stainless steel; machine dimensions LxWxH: 1800x1150x1950mm; weight: 1000kg. Kedpfxov Nlm Ns Aanenf Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. The rotary machine is especially used for filling all kinds of liquids such as water, juices, sauces such as soy sauce, salad dressings, tomato sauce or liquids with high viscosity such as barbecue sauces/BBQ sauces, honey, up to pasty products such as peanut butter, fruit jam, nut nougat cream etc. The filling and capping machine is equipped with six filling heads for liquid filling and with six heads each for positioning and capping the spout caps. The production process is fully automated from bag feeding, filling, cleaning the spouts, feeding the spout caps via lift and capping them, to the output of the final products. To ensure the exact filling volume, the liquid level is constantly monitored. PLC control, touch screen operating monitor (menu available in different languages e.g. English, German etc.). CIP system and UV sterilization lamp included. Suitable for pre-made doypacks with corner spout or spout on top. - Specifications: Spout design: double ring spout; filling range: 50 - 500ml (adjustable); number of filling heads: 6; max. number of machine cycles in neutral: 16 cycles/min (corresponds to max. 100 bags/min); current: 220/380V, 3-phase, 2.5kW; air pressure and consumption: 6-7bar, 0.7m³/min; liquid contact parts are made of SUS 316 stainless steel, non-contact parts are made of SUS 304 stainless steel; machine dimensions without bag feeding belt: L2600xW1830xH2050mm; bag feeding belt dimensions: L2000xW400xH1500mm; weight: 1700kg. Ksdpfx Aajv Nlnaensnf Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Premade pouches packaging/filling and closing machine, rotary operation with 8 working positions. Suitable for flat pouches and doypack style pouches with/without zipper or spout. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed, especially for zipper or spout bags. Sucking unit to open all kind of bags with thinner film material. Suitable for the following bag dimensions: L(100-350)xW100-210)mm. - Technical specifications: max. speed of the machine in neutral: 45 cycles/minute; power: 380V, 3.0kW; compressed air: 0.6m³, 6bar; machine dimensions: L2500xW1800xH1800mm; weight: 1100kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Kodpov Nlmpefx Aanjnf

Year of construction: 2025, condition: new, Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. Suitable for premade doypacks with a corner spout or a spout on top. The rotary machine has two filling heads for liquid filling and two heads each for positioning and closing the spout lids. Additional equipment: feeding lift for the spout caps, external module for CIP cleaning, air cleaning system for inner area of the machine. Relevant electronic components from Schneider and Omron, PLC and touch screen from SIEMENS, pneumatic components from AIRTAC. - Specifications: Filling range: max. 500ml; number of filling heads: 2; max. number of machine cycles in neutral: 16 cycles/min (corresponds to max. 33 bags/min); current: 220V, 1.5kW; air pressure and consumption: 5-7bar, 0.65m³; machine dimensions LxWxH: 1990x1300x1980mm; weight: 1500kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Kodpsv Nlm Ajfx Aanenf