Used Sac for sale (41)

Condition: good (used), Year of construction: 1994, SAC F4 – year 1994 – very well-preserved, maintained condition, still in production. In 2005, the machine was upgraded to a more modern control system. SAC F4 TL – year 2002 – machine with full equipment, currently in storage (only the nameplate and a picture from the internet available). Included are tools for the production of Euro-style windows and doors, thickness 78 and 92 mm, brand Vydona – drawings attached. Price for this set (2 machines + tools): €9,000 Nkedpfxeyw R Iao Ah Rew

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch Njdpfx Aheudxchj Rskw TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Table Milling Machine TS110 Year of manufacture: 1990 380 Volt, 7.5 HP Milling fence with fine adjustment 4 spindle speeds: 3,000, 4,500, 8,000, and 10,000 rpm Left/right rotation, brake Njdpev Im Swofx Ah Rjkw Haffner 3-roller power feeder with 4 feed speeds Feed rollers new Transport available at additional cost!

Condition: good (used), Planer thicknesser FS530 - Control panel on top - Serrated table lips - Motor brake - Year of manufacture: 1998 - Cutterblock diameter: 120 mm - Table length: 2900 mm Njdpeywn Dfsfx Ah Rokw - 4 knives - Weight approx. 800 kg

Condition: used, Year of construction: 2005, total width: 1,250 mm, total height: 1,250 mm, Weight: 820 kg Dimensions (LxBxH): 105 x 125 x 125 cm - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: AF 1.04487 - Main motor power [kW]: 4.0 - Max. planing width [mm]: 520 - Planing shaft speed [rpm]: 5000 - Planer block diameter [mm]: 120 - Number of cutters [pcs.]: 2 - Transport dimensions: 1050mm x 1250mm x 1250mm (l x w x h) - Transport weight [kg]: 820kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Nedpfx Aswnhyzeh Rekw Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Surface planer Brake motor Undervoltage release Nkodpfxsyrflne Ah Rsw Emergency stop NEW motor Various NEW switches CE compliant Total table length: 2900 mm Infeed table length: 1550 mm Outfeed table length: 1310 mm Working width: 430 mm Working height: 800 mm Cutterblock diameter: 120 mm Cutterblock speed: 5000 rpm Number of knives: 4 Knife dimensions: 430 × 35 × 3 mm Rabbeting depth: 20 mm Planer fence L × H = 1000 × 180 mm Fence tiltable up to 45 degrees Motor power: 3.2 kW, 400 V, 50 Hz Dimensions L × W × H: 2900 × 700 × 960 mm Weight: 475 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, power: 7.5 kW (10.20 HP), planing width: 630 mm, For sale is a robust thickness planer SAC Type S63 in heavy-duty industrial design. The machine is fully operational and ideally suited for joineries, workshops, or demanding DIY enthusiasts. Technical Data: + Manufacturer: SAC (Italy) + Model: S63 + Motor power: 7.5 kW + Voltage: 400 V (three-phase) + Planing width: approx. 630 mm + Planing height: approx. 3 – 300 mm + Number of knives: 4-knife Centrofix cutterblock (quick-change system) + Weight: approx. 900 kg + Table adjustment at the push of a button + Planing height displayed numerically + Infeed rollers in the thicknessing table Condition: Used, but in good condition. The machine runs smoothly and reliably. Normal signs of use present. Nkjdpfx Ahoyxnq Uo Rjw Other information: Viewing and test run available by appointment. Assistance with loading can be provided. Shipping by freight forwarder possible. Price: Negotiable, €6,350 net

Condition: good (used), Code: 0320 Brand: SAC SUERI - ITALY Model: T 4 - CE Standard Electronic tenoning machine for wooden frames, doors, cabinet doors, furniture, and various - CE Standard Nksdsytg R Ijpfx Ah Rew Technical data: End trimming saw with continuous axis positioning - Horizontal stroke 130 mm - Motor power 3,2 Kw - Blade diameter 400 mm Hole 30 Tenoning spindle - Spindle length 320 mm - Spindle diameter 50 mm - Motor power 5,5 Kw - Continuous axis positioning - Max tool diameter 350 mm Tenoning carriage table size 750 x 900 mm - Motor power 1,1 Kw - Working speed 3/10 mt/min - Positioning speed 30 mt/min - Tilting guide - Guide with stop and display Min workpiece height 30 mm Max workpiece height 90 mm Min workpiece width 30 mm Max workpiece width 600 mm Min/max workpiece length 200/3000 mm Max tenoning depth 130 mm Max squaring width 1000 mm Electronic control of all machine functions - Alphanumeric keyboard - Monitor LCD 9,5"- 800 storable programs - Free programming by the operator - Sequential work programs Suction port diameter mm 100/160 Overall dimensions mm 2250 x 1800 x 2050 h Weight kg 1800

Condition: used, Year of construction: 1999, spindle tilting: yes -5 bis 45° height adjustment: electric tilting adjustment: electric fence adjustment: manual altitude display: digital swivel angel display: digital tilting fence display: Scala spindle diameter: 30 mm speed: 1500, 2250, 3000, 4000, 5000, 3000, 4500, 6000, 8000, 10000 power consuption: 7,5 kW motor brake: yes, automatic suction connection: 2 x 120mm machine length: 2400mm maschine width: 1400mm Nedpfsiixxcjx Ah Rokw weight: 1100kg

Condition: used, Year of construction: 1980, Spindle swivels: No Sliding carriage: Yes Height adjustment: Handwheel Pivot adjustment: - Milling jaw adjustment: manual Height indication: Scala Swivel angle display: - Milling stop display: Scala Milling spindle diameter: 40 mm Speeds: 3000, 4500, 6000, 9000 motor power: 5 kW Motor brake: Yes automatic Njdpfx Aek Eakcsh Rjkw Suction connection: 2 x 120mm Machine length: 1200mm Machine depth: 900mm Weight: 600kg

Condition: used, Year of construction: 1992, working width: 530 mm cutter head: Leitz - Centrofix number of blades: 4 surface table length: 2900 mm adjustment table: Hebel read out out table height: Scala surface fence tiltable: ja motor power: 4 kW machine length: 2900 mm machine width: 1000mm weight: 800 kg Nkedpfx Ahjug Tyto Rew

Condition: excellent (used), PAOLONI SAC RD 230 15/24 four-sided srtug machine Nkodpfouy H Nwox Ah Rjw Technical data: Max planing width: 230 mm Max planing height: 120 mm Diameter of the spindles: 40 mm Number of spindles: 4 Order of spindles: bottom right left top Number of top steel pulling rollers: 2 Number of top rubber pulling rollers: 1 Number of smooth rollers in countertop: 1 Extraction spigot diameter: 3 x 120 mm Working table lubrication pump Manual lifting of the body Power supply: 400 V Total power: 21 kw Overall dimensions: Length: 3280 mm Width: 1290 mm Height: 1500 mm

Condition: used, Thickness planer SAC 530 Max. planing width: 530 mm Max. planing height: 300 mm 4 classic knives clamped with wedges Nksdpfsyt Hpwjx Ah Rew Electric height adjustment Feed speed adjustable via inverter from 4 to 16 m/min Segmented metal infeed roller 2 outfeed rollers after the planing shaft Digital height display 5.5 kW motor Quiet operation, works smoothly and efficiently

Condition: excellent (used), Milling machine for wood Make SAC type ts 80 4 milling spindles : Speed : 2900 - 4000- 5800 - 8000 n1/min Milling cutter stroke 150 mm Table 1000 x 800 mm 3 roller feed unit make ELU infinitely variable speed Motor 380 Volt 2800 n1/min. 11,3 Ampere 5,5 kw Nksdpfxetyv Aas Ah Row Transport dimension : L.1020 mm W. 800 mm H.1650 mm, with pallet Weight 470 kg

Condition: excellent (used), Top and bottom sander SAC 4R-300 Working width: 300 mm Working height: 2.5–150 mm 4 sanding units Njdpfxeygrb Sj Ah Rekw 2x bottom unit 2×5.5 kW 2x top unit 2×5.5 kW Top and bottom cleaning brush 2×0.55 kW Feed speed adjustable via frequency inverter: 4–16 m/min Electric sanding height adjustment Can be integrated into a line with other machines CE certificate

Condition: ready for operation (used), Thicknesser SAC RS53 4 knives Specification: • working width - 530 mm • working height - 240 mm • 5.0 kW engine • 4-knife shaft for traditional knives • analog thickness indicator • 2 feed speeds • full, straight pulling shaft in front of the planing shaft Nsdpfx Aowgdgheh Rskw • two steel outgoing rollers behind the planing shaft • sliding roller in the lower table • manual up/down adjustment • table supported by 1 solid piston • original painting • sawdust extraction outlet fi 140 mm • weight approx. 800 kg • dimensions 92 x 100 x 160 cm (length x width x height) Additional information: • the photos show the actual condition of the item for sale • the device can be switched on and checked on site.

Condition: ready for operation (used), functionality: fully functional, Thickness planer SAC RS53, 4 knives Specification: • Condition – used, after inspection • Working width – 530 mm • Working height – 240 mm • Motor power – 4.0 kW • 4-knife cutterhead for traditional knives • Analog thickness indicator • 2 feed speeds • Full, straight infeed roller before the cutterhead • Two steel outfeed rollers after the cutterhead • Slip roller in the lower table • Manual height adjustment (up/down) • Table supported by a single solid piston • Original paintwork • Outlet for chip extraction, diameter 145 mm • Weight approx. 800 kg • Overall dimensions: 95 x 100 x 105 cm (L x W x H) Nodsxdxk Tspfx Ah Rjkw Additional information: • The photos shown reflect the actual condition of the item for sale • Possible to power on and test the machine on site.

Condition: used, Year of construction: 1989, For sale: Used SAC surface planer with a planing length of 2900 mm. The machine is in good condition and has been refurbished and inspected by our specialist staff. Technical specifications: - 4-knife cutterblock - Planing width: 430 mm - Planing length: 2900 mm - Extractable, suction diameter Ø 140 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 1989 The planer is located in A-5431 Kuchl and can be inspected any time during our opening hours. Subject to prior sale! Nkodpfx Aeyh Auish Row Related terms: planer, surface planer, jointer. Reference: R-G00 V0

Condition: good (used), Year of construction: 1990, For sale is a used SAC RS-53 thickness planer with a maximum planing height of up to 240 mm. The machine is in good condition and has been overhauled and inspected by our specialist personnel. Technical specifications: - 4-knife cutterhead Njdpfsyh Arhox Ah Rokw - Planing width: 530 mm - Max. pass-through height: 240 mm - 4 feed speeds - Suction port Ø 140 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 1990 The planer is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: planer, thicknesser, thicknessing machine, reference: R-G00 V0

Condition: used, Year of construction: 1979, roll diameter: 600 mm cutting width: 580mm table tilting: yes belt speed: motor power: 2,2 kW motor brake: yes / manual Nedpfx Aoyhgigoh Rekw suction connection: 100mm machine length: 120mm machine width: 800mm machine hight: 2015mm weight: 200kg

Condition: good (used), Code: 0294 Brand: SAC Model: TS 120/C Spindle moulder with sliding carriage for milling wood, plastics, composite materials, joinery, window frames and various Technical data: Steel base with cast iron table Table dimensions mm 1100 x 700 Njdpfx Asyhqrrsh Rekw Sliding table dimensions mm 1100 x 260 Sliding table stroke 1060 mm Table height 850 mm Shaft diameter 35 mm Max tool diameter 330 mm Vertical spindle stroke 160 mm Spindle rotation speed rpm 2900/4000/5800/8000 Motor power 4 Hp Suction mouth diameter 120 mm Overall dimensions mm 1100 x 1000 x 1200 h Weight kg 580

Condition: good (used), Code: 0288 Brand: SAC Model: F 12 Automatic working center for door and wooden window frames Technical data: Tenoning side : End cutting circular saw - Blade diameter mm 400 Nsdpfxsyg Iq No Ah Rskw Motor power Hp 4 Horizontal positioning with indexing stops N° 2 tenoning spindles each lenght mm 320 Max tools diameter mm 320 Spindle diameter mm 50 Motors power each Hp 10 Max thickness of pieces mm 100 N° 2 suction inlets mm 130 Automatic table with guideline Profiling side: N° 4 profiling spindles each lenght mm 270 - Spindle diameter mm 50 Motors power each Hp 10 N° 4 suction inlets mm 130 Glass bead recovery device - Motor power Hp 3 - Blade diameter mm 200 Exhaust outlet diameter mm 60 Glass bead recovery device - Motor Hp 3 Exhaust outlet diameter mm 100 Adjustable feed speed Return roller conveyor Overall dimensions - tenoning machine : mm 2900 x 2400 x 2200 h Overall dimensions - profiling machine : mm 2900 x 1400 x 1800 h Total weight kg 2900

Condition: used, Year of construction: 1996, functionality: fully functional, Planer, thicknesser SAC FS 305 – after technical inspection, ready for operation Specification: • Technical condition – used, after professional servicing • Manufacturer – SAC • Model – FS 305 • Working width – 305 mm • Table length – 2180 mm • Adjustable tilting fence • Motor power – 2.2 kW • Spindle speed – 5000 rpm • Noise-reducing comb on the cutterblock • 3-knife cutterblock, 120 mm diameter, for standard knives • Star-delta starter • Motor brake • Dust extraction outlet – 150 mm diameter • Weight – approx. 600 kg • Machine complies with CE standards • Year of manufacture – 1996 • Overall dimensions – 218 x 80 x 140 cm (L x W x H) Additional information: • The machine is in very good technical condition, ready for immediate use • Photos show the actual condition of the item for sale • Possibility to connect and check the machine on-site • The listed price does not include VAT or transport costs Financing and transport: Nedpeyiahpsfx Ah Rokw • We arrange transport with the MDD fleet, courier companies or external carriers • We provide financial support in the form of leasing or lease loans

Condition: used, Year of construction: 1997, Belt width: 150 mm Belt length: Table size: Veneer sanding unit: yes Oscillation: yes Tilting table: yes, 0°÷ 45° Extraction connection: 120 mm Motor power: 3 kW Machine length: 1440 mm Machine width: 800 mm Nsdpfx Ahjyffxze Rokw Weight: 530 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, grinding width: 1,320 mm, grinding height: 160 mm, Wide Belt Sander SAC Project RT 1320 Specification: • Condition – used, fully serviced and calibrated • Manufacturer – SAC • Model – Project RT 1320 • Working width – 1320 mm • Maximum working height – 160 mm • Two sanding units: - First unit: calibrating roller made of hard rubber, diameter 300 mm (brand new, recently resurfaced) - Second unit: platen with sectional shoe and jump-in/out function • Dust extraction brush at the outfeed • Main motors: 10 and 11 kW • Total machine power at full load – 28 kW • Machine operated via touchscreen panel with memory for various programs and settings as required • Capability to operate in manual mode (user-defined parameters) or automatic mode (pre-saved programs with settings and parameters) • Stepless adjustment of the second unit’s rotational speed • Stepless feed speed adjustment Nodpfx Ahsw U Dxfj Rokw • Electronic thickness gauge for the workpiece • Vacuum pump included • Belt cleaning/blow-off mechanism • Oscillation controlled by photoelectric sensors • Conveyor in very good condition • Extension roller tables included • Material thickness measuring gauge • Sensor to prevent feeding elements that are too thick • Original paintwork • Abrasive belt size – 2620 x 1320 mm • Extraction ports – 3 x 175 mm + 120 mm from brush • Weight – 2300 kg • Year of manufacture – 2001 • Overall dimensions – 255 x 205 x 230 cm (L x W x H) Additional information: • Excellent original technical and visual condition • Provided photos show the actual condition of the item for sale • Possibility to connect and test the machine on site