Used Machine A Sac Papier for sale (48)

Condition: used, functionality: fully functional, On offer: SAC RTE 1000 wide belt sander, with pressure shoe The machine is used, has undergone technical inspection, is fully functional, and ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. The machine's greatest advantage is its ability to calibrate and precisely finish-sand. The unit with a hard rubber roller is responsible for leveling the surface, and the pneumatic pressure shoe with a "creep feed" function allows for precise finishing of the component. The two-speed motor and two conveyor speeds allow the operating parameters to be adjusted to the material being processed. Specifications: • Manufacturer: SAC Lrodpfxozvuy Ij Ai Hor • Model: RTE 1000 • Working width: 1000 mm • Maximum height of the workpiece: 165 mm • Number of sanding units: 2 • One combined unit: hard rubber roller, 160 mm diameter + pressure shoe • Pneumatic pressure shoe with "creep feed" function • Main two-speed motor: 10 / 12 kW • Number of conveyor speeds: 2 • Electric adjustment of the work table height • Abrasive belt blowing system • Abrasive belt dimensions: 1900 × 1000 mm • Dust extraction port: Ø200 mm • Overall dimensions: 145 × 210 × 190 cm (L × W × H, without the guard) Applications: • Calibrating and leveling solid wood components • Sanding panels and glued components • Inter-operation sanding • Precise finishing sanding using the pressure shoe • Processing components with a width of up to 1000 mm and a height of up to 165 mm • Preparing surfaces for lacquering, oiling, or further processing Additional information: • The photos show the actual condition of the machine being offered • Free machine operation training at our company's premises • The price stated in the auction applies to export/intra-community sales with a VAT rate of 0%; for domestic sales, 23% VAT will be added. Financing and transport: • We arrange transport with our MDD fleet or through external carriers • We assist in obtaining a lease or leasing loan • The delivery cost depends on the destination and the method of transporting the machine.

Condition: used, Year of construction: 1994, Belt height: 150 mm Ljdpfx Aezd Hngoi Herr Belt length: 2280 to 2290 mm Belt speed: 22 m/s Two-sided sanding with oscillation Drive mechanism Veneer sanding mechanism End-face sanding / radius sanding with a small support table Surface sanding with a tilting table Belt direction: right/left Location: Nattheim

Year of construction: 2004, condition: ready for operation (used), Tenoning machine manufactured in 2004. This SAC T4TL features a spindle length of 640 mm and a tilting table designed for tenoning and squaring. If you are looking to get high-quality tenoning capabilities, consider the SAC T4TL machine we have for sale. Contact us for further details. • Spindle Length: 640 mm Ljdpezug Emefx Ai Horr • Tenoning Machine • Working Table: Tilting table for tenoning and squaring

Condition: used, Year of construction: 1991, Planing width: 530 mm Planing height: 240 mm Minimum planing height: 1 mm Maximum chip removal: 8 mm Diameter of cutterhead: 120 mm Speed: 5000 rpm Cutters: 4 pcs Motor: 4 kW Feed rate: 5, 7.5, 10, 15 m/min Table dimensions: 960 x 530 mm Dust extraction port: 140 mm Weight: approx. 970 kg Location: Customer Lrjdpjzi Augefx Ai Her

Condition: used, Technical specifications: Spindle diameter: 35 mm Spindle height: 160 mm Lrjdpfezilp Hox Ai Hjr Spindle rotation: left/right Electric spindle height adjustment Tilting spindle Adjustable cross-slide arms Dust extraction port: 120 mm Motor power: 5.5 kW Power supply: 380 V Manufacturer: SAC Overall dimensions: Length: 1120 mm Width: 1070 mm Height: 1040 mm

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, table length: 1,500 mm, table width: 130 mm, overall weight: 450 kg, grinding height: 200 mm, input frequency: 50 Hz, - Used machine - Year of manufacture: 1998 - Condition: well-maintained, CE marking TECHNICAL SPECIFICATIONS: - Dimensions of the sanding belt: 2300 x 200 mm - Dimensions of the grinding surface: 800 x 230 mm - Belt speed: 8 / 12 m/s - Dimensions of the work table: 1500 x 130 mm - Dimensions of the tilting work table: 150 x 130 mm - Tilting angle of the work table: 0 – 45 º - Working height: 870 mm - Diameter of the drive roller: Ø 140 mm - Diameter of the guide roller: Ø 90 mm Lodpfx Aozinlwji Horr - Motor power (2 speeds): 3 kW - Motor power for oscillation: 0.22 kW - Diameter of the dust extraction nozzle: Ø 160 mm - Overall dimensions: 1500 x 900 x 1600 mm - Weight: 450 kg

Condition: used, Year of construction: 1988, Spindle swivels: Yes, -5 to 45° Height adjustment: electric Swivel adjustment: electric Stop adjustment: manual Height indicator: scale Swivel angle indicator: scale Milling stop indicator: scale Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 8000, 10000 Motor power: 6 kW Motor brake: Yes, automatic Ledpfszq Dc Ijx Ai Horr Dust extraction connection: 2 x 120mm Machine length: 1,200 mm Machine width: 1400 mm Weight: 1100 kg

Condition: used, Year of construction: 2005, total width: 1,250 mm, total height: 1,250 mm, Colour: Grey Weight: 820 kg Dimensions (LxBxH): 105 x 125 x 125 cm - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: AF 1.04487 - Main motor power [kW]: 4.0 - Max. planing width [mm]: 520 - Planing shaft speed [rpm]: 5000 - Planer block diameter [mm]: 120 - Number of cutters [pcs.]: 2 - Transport dimensions: 1050mm x 1250mm x 1250mm (l x w x h) - Transport weight [kg]: 820kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ledpfjwnhyzox Ai Horr Yorick Diebels

Condition: good (used), Year of construction: 1994, Oscillation ja ja / nein ja ja/nein ja ja/nein tiltable up to 30 Grad Lrodpfx Aiozfqkze Hor Motor output 2,8 kW Table dimensions 850 x 300 mm sanding width 150 mm Weight 330 kg

Condition: excellent (used), functionality: fully functional, planing width: 430 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, total length of planing tables: 2,900 mm, total width: 700 mm, total height: 1,000 mm, overall weight: 750 kg, SAC FS 400 Planer | 4-knife surface planer! Excellent condition! SAC FS 400 Planer | 4-knife surface planer! EXCELLENT CONDITION! Machine from an Italian manufacturer. TECHNICAL SPECIFICATIONS: - Table length 2900 mm - Working width 430 mm - 4 traditional knives - 3kW motor - Shaft rpm 5000 - Shaft diameter 120mm - Both tables are adjustable - Stable, solid fence - Shaft damping system Machine dimensions: - Length 290 cm - Width 70 cm - Height 100 cm - Weight 750 kg Ledpfx Aezqlqmei Herr WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: good (used), Code: 0288 Brand: SAC Model: F 12 Automatic working center for door and wooden window frames Technical data: Tenoning side : End cutting circular saw - Blade diameter mm 400 Motor power Hp 4 Horizontal positioning with indexing stops N° 2 tenoning spindles each lenght mm 320 Max tools diameter mm 320 Spindle diameter mm 50 Motors power each Hp 10 Max thickness of pieces mm 100 N° 2 suction inlets mm 130 Ljdpfxoyg Iq Ns Ai Herr Automatic table with guideline Profiling side: N° 4 profiling spindles each lenght mm 270 - Spindle diameter mm 50 Motors power each Hp 10 N° 4 suction inlets mm 130 Glass bead recovery device - Motor power Hp 3 - Blade diameter mm 200 Exhaust outlet diameter mm 60 Glass bead recovery device - Motor Hp 3 Exhaust outlet diameter mm 100 Adjustable feed speed Return roller conveyor Overall dimensions - tenoning machine : mm 2900 x 2400 x 2200 h Overall dimensions - profiling machine : mm 2900 x 1400 x 1800 h Total weight kg 2900

Condition: good (used), Year of construction: 1994, Working width 500 mm Ledpfx Aiezfqknj Herr Working height 240 mm Motor output 4,0 kW Length of the planing table 2470 mm Number of knives 4 St. Feed speed 7/14 m/min. machine weight ab. 1050 kg

Condition: good (used), Code: 0364 Brand: SAC Model: TS 110 Spindle moulder for milling and jointing operations on wood, plastics, composite materials, and various Technical specifications: Table dimensions mm 1100 x 900 Table height mm 860 Spindle diameter mm 40 Max applicable tool diameter mm 240 Spindle vertical stroke 2900-4500-6000-10000 rpm Motor power 5,5 Hp Overall dimensions mm 1100 x 900 x 1100 h Weight kg 780 Lrodpsy Erk Ssfx Ai Hor

Condition: good (used), Code: 0388 Brand: SAC Model: FS 530 Surface planer with ‘Tersa’ knives for joinery, furniture, custom-made furniture, wooden joinery, doors, timber framing, sawmills, plastics and various Features: Rigid steel base Ground and balanced steel spindle Low noise level Tilting fence from 0° to 45° Feed indicator Shaft with ‘Tersa’ knives Technical data: Working width 530 mm Total table length 2890 mm Table height 800 mm N° 4 knives Max pass 20 mm Motor 4 Hp Tilting guide – dimensions 120 x 160 mm Lredpfx Aioy Spqce Her Overall dimensions mm 2890 x 900 x 96o h Weight kg 800

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Ledpfsudxchex Ai Hjrr Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Year of construction: 2012, The SAC F4TL window manufacturing centre is designed to meet the requirements of modern window production. It enables highly efficient, high-quality manufacturing with minimal setup time and without the need for tool changes. After machining, the workpiece is automatically returned to the operator. SAC F4TL CNC Window Manufacturing Centre – Machining Units Tenoning Side 1. Tenoning carriage 2. End trimming unit 3. Tenoning spindle Profiling Side 4. First profiling spindle 5. Second profiling spindle 6. Glazing bead notching unit 7. Hardware slot milling unit (optional) Feed System Tenoning Side 1. Tenoning carriage • Machining speed: 3–10 m/min • Return speed: 45 m/min • Table size: 290–955 mm • Motor power: 1.1 kW • Fence tilting angle: ±60° 2. End trimming unit • Saw blade diameter: 400 mm • Bore diameter: 30 mm • Motor power: 3 kW 3. Tenoning spindle • Vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 620 mm • Vertical travel: 565 mm • Motor power: 7.5 kW • Maximum tool diameter: 350 mm Profiling Side 4. First Profiling Spindle • Spindle vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 320 mm • Vertical spindle travel: 295 mm • Horizontal spindle adjustment: 60 mm • Spindle rotation direction: left/right • Motor power: 7.5 kW • Maximum tool diameter: 240 mm 5. Second Profiling Spindle • Spindle vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 320 mm • Vertical spindle travel: 295 mm • Horizontal spindle adjustment: 60 mm • Spindle rotation direction: right • Motor power: 7.5 kW • Maximum tool diameter: 240 mm 6. Glazing Bead Notching Unit • Saw blade diameter: 200 mm • Saw blade bore: 30 mm • Horizontal spindle adjustment: 60 mm • Motor power: 2.2 kW Optional Unit 7. Hardware Slot Milling Unit • Motor power: 3 kW • Spindle diameter: 30 mm • Spindle length: 100 mm • Horizontal spindle adjustment: 60 mm • Vertical spindle adjustment: 60 mm • CNC-controlled with 2 vertical positions (maximum difference: 60 mm) Lrsdpfx Aiozl D Dns Hor • Maximum tool diameter: 190 mm Feed System • Feed speed: 4–20 m/min • Pneumatic workpiece clamping CNC Control and Software • 17" colour LCD monitor • 102-key alphanumeric keyboard • Operating system: Windows XP Professional Options • Hardware slot milling unit • Motorized NC-controlled stop • Return roller conveyor • Leitz IV 69 tool set • Leitz IV 90 tool set This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Year of construction: 1997, Belt width: 150 mm Lredpfeyffxzex Ai Her Belt length: Table size: Veneer sanding unit: yes Oscillation: yes Tilting table: yes, 0°÷ 45° Extraction connection: 120 mm Motor power: 3 kW Machine length: 1440 mm Machine width: 800 mm Weight: 530 kg

Condition: used, Year of construction: 1992, Working width: 530 mm Planer shaft: Leitz - Centrofix Number of knives: 4 Surface table length: 2900 mm Surface table adjustment: lever Lrodpfx Aisug Tyte Hsr Chip removal display: scale Adjustable fence angle: yes Motor power: 4 kW Machine length: 2800 mm Machine width: 1000 mm Weight: 800 kg

Condition: used, Year of construction: 1999, Spindle swiveling: Yes, -5 to 45° Height adjustment: electric Swivel adjustment: electric Stop adjustment: manual Height display: scale Swivel angle display: scale Milling stop display: scale Spindle diameter: 30 mm Speeds: 1500, 2250, 3000, 4000, 5000, 3000, 4500, 6000, 8000, 10000 Motor power: 7.5 kW Motor brake: Yes, automatic Dust extraction connection: 2 x 120 mm Machine length: 2400 mm Machine width: 1400 mm Lrodoiixxcopfx Ai Hsr Weight: 1100 kg

Condition: ready for operation (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SA106560, overall weight: 7,500 kg, total width: 2,970 mm, total length: 3,460 mm, total height: 2,200 mm, spindle diameter: 350 mm, type of input current: three-phase, space requirement length: 7,000 mm, space requirement width: 5,000 mm, milling spindle length: 600 mm, space requirement height: 2,600 mm, length stop: 3,400 mm, input voltage: 380 V, There are two separate machines that can operate independently from each other but also work together. We only produce windows on the SAC F30; for doors, we use the FS.05 and the F30 together. We also have a tooling set that can produce window profiles in four thicknesses: 58/68/78/88 mm and, optionally, 108 mm, from the Italian manufacturer Fantacci. It comes with a large number of spare cutting plates. All digital and paper drawings are available with order numbers for the spare cutting plates, etc. New blades can be easily ordered from Fantacci in Italy. Dust extraction pipes are included, along with pneumatic valves and automatic control. Additional software with unlimited time access allows you to design a window, door, or sliding door and send the production file directly to the machine. All information about the machine, including electrical/pneumatic layout drawings, a spare parts catalog, etc., is available. The machine will be available from 08/2026. You can see the machine in operation at our facility until 20.08.2026. If you are interested, we will provide additional information on how the machine works (1-2 days of training). You will need to arrange the transport yourself, but we will load the machine onto the truck. Prices are exclusive of VAT. Lsdpezq Sr Rofx Ai Hjrr SAC F30 2-4 angle machine = €40,000.00 SAC FS.05 drilling machine = €14,000.00 (If both machines are purchased together, the combined price is €50,000.00) Cutting tool set, including spare cutting plates = €8,500.00 Dust extraction with automated pneumatic valves is included free of charge, as is the Ramasoft software license.

Condition: used, Thickness planer SAC RS/530 - used - Segmented pressure beam, electric height adjustment, under-table roller, separate feed motor ----- Technical Data ----- Planing width: 530 mm, Number of knives: 4 units, Passage height: 240 mm, Feed speed: 7 / 14 m/min, Lodpfx Aow I T N Hji Herr Extraction port Ø: 140 mm, Motor: 4 kW, Weight: 840 kg

Condition: good (used), Year of construction: 1984, SAC used jointer planer SAC FS 430 - 430 mm planing width - 2.90 m table length - 120 mm cutterhead with 4-knife strip knives - 3 kW, 380 volt motor - Automatic motor brake - 8 mm depth of cut - Fence tiltable up to 45° - Swing-away Aigner auxiliary fence - Bridge-type knife guard (cutter cover) - Low-noise design with serrated steel table lips - Extraction port - Weight: approx. 650 kg Location: at customer site - immediately available - Ledpfx Aijx Nrvvs Hjrr Subject to prior sale

Condition: excellent (used), Top and bottom sander SAC 4R-300 Working width: 300 mm Working height: 2.5–150 mm 4 sanding units 2x bottom unit 2×5.5 kW 2x top unit 2×5.5 kW Top and bottom cleaning brush 2×0.55 kW Feed speed adjustable via frequency inverter: 4–16 m/min Lredpeygrb Sefx Ai Hsr Electric sanding height adjustment Can be integrated into a line with other machines CE certificate

Condition: not inspected (used), Year of construction: 1984, Connected load 380V 9A Motor power 4kW Cutting height 460 mm Cutting width 770 mm Extraction 120 mm Lodpfxevt Ttlo Ai Hsrr Height of the machine approx. 2500 mm Panhans band saw guide above and below Saw blade length 5700 mm

Condition: used, Technical specifications: Spindle diameter: 35 mm Spindle height: 160 mm Speeds: 3000/4500/6000/8000/10000 rpm Ledpfx Aiszd Etus Hjrr Manual spindle height adjustment Manual spindle angle adjustment in the range of -5/+40 degrees Left/right rotation Spindle lock Dust extraction port diameter: 140/100 mm Work table dimensions: 850/1190 x 2500 mm Adjustable support arms Motor power: 5.5 kW Power supply: 380 V Overall dimensions: Length: 2600 mm Width: 1200/1540 mm Height: 1100 mm